diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_qsfp.h')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_qsfp.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.h b/drivers/infiniband/hw/qib/qib_qsfp.h new file mode 100644 index 0000000..19b527b --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_qsfp.h @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* QSFP support common definitions, for ib_qib driver */ + +#define QSFP_DEV 0xA0 +#define QSFP_PWR_LAG_MSEC 2000 + +/* + * Below are masks for various QSFP signals, for Port 1. + * Port2 equivalents are shifted by QSFP_GPIO_PORT2_SHIFT. + * _N means asserted low + */ +#define QSFP_GPIO_MOD_SEL_N (4) +#define QSFP_GPIO_MOD_PRS_N (8) +#define QSFP_GPIO_INT_N (0x10) +#define QSFP_GPIO_MOD_RST_N (0x20) +#define QSFP_GPIO_LP_MODE (0x40) +#define QSFP_GPIO_PORT2_SHIFT 5 + +#define QSFP_PAGESIZE 128 +/* Defined fields that QLogic requires of qualified cables */ +/* Byte 0 is Identifier, not checked */ +/* Byte 1 is reserved "status MSB" */ +/* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */ +/* + * Rest of first 128 not used, although 127 is reserved for page select + * if module is not "Flat memory". + */ +/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */ +#define QSFP_MOD_ID_OFFS 128 +/* + * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class + * 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W + */ +#define QSFP_MOD_PWR_OFFS 129 +/* Byte 130 is Connector type. Not QLogic req'd */ +/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */ +/* Byte 139 is encoding. code 0x01 is 8b10b. Not QLogic req'd */ +/* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not QLogic req'd */ +/* Byte 141 is Extended Rate Select. Not QLogic req'd */ +/* Bytes 142..145 are lengths for various fiber types. Not QLogic req'd */ +/* Byte 146 is length for Copper. Units of 1 meter */ +#define QSFP_MOD_LEN_OFFS 146 +/* + * Byte 147 is Device technology. D0..3 not Qlogc req'd + * D4..7 select from 15 choices, translated by table: + */ +#define QSFP_MOD_TECH_OFFS 147 +extern const char *const qib_qsfp_devtech[16]; +/* Active Equalization includes fiber, copper full EQ, and copper near Eq */ +#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1) +/* Attenuation should be valid for copper other than full/near Eq */ +#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1) +/* Length is only valid if technology is "copper" */ +#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1) +#define QSFP_TECH_1490 9 + +#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \ + oui[2]) +#define QSFP_OUI_AMPHENOL 0x415048 +#define QSFP_OUI_FINISAR 0x009065 +#define QSFP_OUI_GORE 0x002177 + +/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */ +#define QSFP_VEND_OFFS 148 +#define QSFP_VEND_LEN 16 +/* Byte 164 is IB Extended tranceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */ +#define QSFP_IBXCV_OFFS 164 +/* Bytes 165..167 are Vendor OUI number */ +#define QSFP_VOUI_OFFS 165 +#define QSFP_VOUI_LEN 3 +/* Bytes 168..183 are Vendor Part Number, string */ +#define QSFP_PN_OFFS 168 +#define QSFP_PN_LEN 16 +/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */ +#define QSFP_REV_OFFS 184 +#define QSFP_REV_LEN 2 +/* + * Bytes 186,187 are Wavelength, if Optical. Not Qlogic req'd + * If copper, they are attenuation in dB: + * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR) + */ +#define QSFP_ATTEN_OFFS 186 +#define QSFP_ATTEN_LEN 2 +/* Bytes 188,189 are Wavelength tolerance, not QLogic req'd */ +/* Byte 190 is Max Case Temp. Not QLogic req'd */ +/* Byte 191 is LSB of sum of bytes 128..190. Not QLogic req'd */ +#define QSFP_CC_OFFS 191 +/* Bytes 192..195 are Options implemented in qsfp. Not Qlogic req'd */ +/* Bytes 196..211 are Serial Number, String */ +#define QSFP_SN_OFFS 196 +#define QSFP_SN_LEN 16 +/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */ +#define QSFP_DATE_OFFS 212 +#define QSFP_DATE_LEN 6 +/* Bytes 218,219 are optional lot-code, string */ +#define QSFP_LOT_OFFS 218 +#define QSFP_LOT_LEN 2 +/* Bytes 220, 221 indicate monitoring options, Not QLogic req'd */ +/* Byte 223 is LSB of sum of bytes 192..222 */ +#define QSFP_CC_EXT_OFFS 223 + +/* + * struct qib_qsfp_data encapsulates state of QSFP device for one port. + * it will be part of port-chip-specific data if a board supports QSFP. + * + * Since multiple board-types use QSFP, and their pport_data structs + * differ (in the chip-specific section), we need a pointer to its head. + * + * Avoiding premature optimization, we will have one work_struct per port, + * and let the (increasingly inaccurately named) eep_lock arbitrate + * access to common resources. + * + */ + +/* + * Hold the parts of the onboard EEPROM that we care about, so we aren't + * coonstantly bit-boffing + */ +struct qib_qsfp_cache { + u8 id; /* must be 0x0C or 0x0D; 0 indicates invalid EEPROM read */ + u8 pwr; /* in D6,7 */ + u8 len; /* in meters, Cu only */ + u8 tech; + char vendor[QSFP_VEND_LEN]; + u8 xt_xcv; /* Ext. tranceiver codes, 4 lsbs are IB speed supported */ + u8 oui[QSFP_VOUI_LEN]; + u8 partnum[QSFP_PN_LEN]; + u8 rev[QSFP_REV_LEN]; + u8 atten[QSFP_ATTEN_LEN]; + u8 cks1; /* Checksum of bytes 128..190 */ + u8 serial[QSFP_SN_LEN]; + u8 date[QSFP_DATE_LEN]; + u8 lot[QSFP_LOT_LEN]; + u8 cks2; /* Checsum of bytes 192..222 */ +}; + +#define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3) +#define QSFP_ATTEN_SDR(attenarray) (attenarray[0]) +#define QSFP_ATTEN_DDR(attenarray) (attenarray[1]) + +struct qib_qsfp_data { + /* Helps to find our way */ + struct qib_pportdata *ppd; + struct work_struct work; + struct qib_qsfp_cache cache; + u64 t_insert; +}; + +extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd, + struct qib_qsfp_cache *cp); +extern void qib_qsfp_init(struct qib_qsfp_data *qd, + void (*fevent)(struct work_struct *)); +extern void qib_qsfp_deinit(struct qib_qsfp_data *qd); |
