summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath/ipath_iba6120.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_iba6120.c')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c73
1 files changed, 51 insertions, 22 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 05918e1..1b9c308 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -43,6 +43,8 @@
#include "ipath_kernel.h"
#include "ipath_registers.h"
+static void ipath_setup_pe_setextled(struct ipath_devdata *, u64, u64);
+
/*
* This file contains all the chip-specific register information and
* access functions for the QLogic InfiniPath PCI-Express chip.
@@ -207,8 +209,8 @@ static const struct ipath_kregs ipath_pe_kregs = {
.kr_ibpllcfg = IPATH_KREG_OFFSET(IBPLLCfg),
/*
- * These should not be used directly via ipath_read_kreg64(),
- * use them with ipath_read_kreg64_port()
+ * These should not be used directly via ipath_write_kreg64(),
+ * use them with ipath_write_kreg64_port(),
*/
.kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
.kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0),
@@ -321,6 +323,12 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
};
+#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+
+static int ipath_pe_txe_recover(struct ipath_devdata *);
+
/**
* ipath_pe_handle_hwerrors - display hardware errors.
* @dd: the infinipath device
@@ -394,32 +402,21 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
* occur if a processor speculative read is done to the PIO
* buffer while we are sending a packet, for example.
*/
- if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
- ipath_stats.sps_txeparity++;
- ipath_dbg("Recovering from TXE parity error (%llu), "
- "hwerrstatus=%llx\n",
- (unsigned long long) ipath_stats.sps_txeparity,
- (unsigned long long) hwerrs);
- ipath_disarm_senderrbufs(dd);
- hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- if (!hwerrs) { /* else leave in freeze mode */
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_control,
- dd->ipath_control);
- return;
- }
- }
+ if ((hwerrs & TXE_PIO_PARITY) && ipath_pe_txe_recover(dd))
+ hwerrs &= ~TXE_PIO_PARITY;
if (hwerrs) {
/*
* if any set that we aren't ignoring only make the
* complaint once, in case it's stuck or recurring,
* and we get here multiple times
+ * Force link down, so switch knows, and
+ * LEDs are turned off
*/
if (dd->ipath_flags & IPATH_INITTED) {
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ ipath_setup_pe_setextled(dd,
+ INFINIPATH_IBCS_L_STATE_DOWN,
+ INFINIPATH_IBCS_LT_STATE_DISABLED);
ipath_dev_err(dd, "Fatal Hardware Error (freeze "
"mode), no longer usable, SN %.16s\n",
dd->ipath_serial);
@@ -493,7 +490,8 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
dd->ipath_hwerrmask);
}
- ipath_dev_err(dd, "%s hardware error\n", msg);
+ if (*msg)
+ ipath_dev_err(dd, "%s hardware error\n", msg);
if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg) {
/*
* for /sys status file ; if no trailing } is copied, we'll
@@ -581,6 +579,8 @@ static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
ipath_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & INFINIPATH_EXTS_MEMBIST_FOUND)
+ ipath_dbg("MemBIST corrected\n");
val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */
@@ -1330,6 +1330,35 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd)
dd->ipath_irq = 0;
}
+/*
+ * On platforms using this chip, and not having ordered WC stores, we
+ * can get TXE parity errors due to speculative reads to the PIO buffers,
+ * and this, due to a chip bug can result in (many) false parity error
+ * reports. So it's a debug print on those, and an info print on systems
+ * where the speculative reads don't occur.
+ * Because we can get lots of false errors, we have no upper limit
+ * on recovery attempts on those platforms.
+ */
+static int ipath_pe_txe_recover(struct ipath_devdata *dd)
+{
+ if (ipath_unordered_wc())
+ ipath_dbg("Recovering from TXE PIO parity error\n");
+ else {
+ int cnt = ++ipath_stats.sps_txeparity;
+ if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) {
+ if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
+ ipath_dev_err(dd,
+ "Too many attempts to recover from "
+ "TXE parity, giving up\n");
+ return 0;
+ }
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+ }
+ ipath_disarm_senderrbufs(dd, 1);
+ return 1;
+}
+
/**
* ipath_init_iba6120_funcs - set up the chip-specific function pointers
* @dd: the infinipath device
OpenPOWER on IntegriCloud