diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_driver.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_driver.c | 349 |
1 files changed, 242 insertions, 107 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index f98518d..2108466 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -39,7 +39,7 @@ #include <linux/vmalloc.h> #include "ipath_kernel.h" -#include "ipath_layer.h" +#include "ipath_verbs.h" #include "ipath_common.h" static void ipath_update_pio_bufs(struct ipath_devdata *); @@ -51,8 +51,6 @@ const char *ipath_get_unit_name(int unit) return iname; } -EXPORT_SYMBOL_GPL(ipath_get_unit_name); - #define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: " #define PFX IPATH_DRV_NAME ": " @@ -60,13 +58,13 @@ EXPORT_SYMBOL_GPL(ipath_get_unit_name); * The size has to be longer than this string, so we can append * board/chip information to it in the init code. */ -const char ipath_core_version[] = IPATH_IDSTR "\n"; +const char ib_ipath_version[] = IPATH_IDSTR "\n"; static struct idr unit_table; DEFINE_SPINLOCK(ipath_devs_lock); LIST_HEAD(ipath_dev_list); -wait_queue_head_t ipath_sma_state_wait; +wait_queue_head_t ipath_state_wait; unsigned ipath_debug = __IPATH_INFO; @@ -403,10 +401,10 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, /* setup the chip-specific functions, as early as possible. */ switch (ent->device) { case PCI_DEVICE_ID_INFINIPATH_HT: - ipath_init_ht400_funcs(dd); + ipath_init_iba6110_funcs(dd); break; case PCI_DEVICE_ID_INFINIPATH_PE800: - ipath_init_pe800_funcs(dd); + ipath_init_iba6120_funcs(dd); break; default: ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, " @@ -440,7 +438,13 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, } dd->ipath_pcirev = rev; +#if defined(__powerpc__) + /* There isn't a generic way to specify writethrough mappings */ + dd->ipath_kregbase = __ioremap(addr, len, + (_PAGE_NO_CACHE|_PAGE_WRITETHRU)); +#else dd->ipath_kregbase = ioremap_nocache(addr, len); +#endif if (!dd->ipath_kregbase) { ipath_dbg("Unable to map io addr %llx to kvirt, failing\n", @@ -503,7 +507,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, ipathfs_add_device(dd); ipath_user_add(dd); ipath_diag_add(dd); - ipath_layer_add(dd); + ipath_register_ib_device(dd); goto bail; @@ -532,7 +536,7 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev) return; dd = pci_get_drvdata(pdev); - ipath_layer_remove(dd); + ipath_unregister_ib_device(dd->verbs_dev); ipath_diag_remove(dd); ipath_user_remove(dd); ipathfs_remove_device(dd); @@ -607,21 +611,23 @@ void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first, * * wait up to msecs milliseconds for IB link state change to occur for * now, take the easy polling route. Currently used only by - * ipath_layer_set_linkstate. Returns 0 if state reached, otherwise + * ipath_set_linkstate. Returns 0 if state reached, otherwise * -ETIMEDOUT state can have multiple states set, for any of several * transitions. */ -int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs) +static int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, + int msecs) { - dd->ipath_sma_state_wanted = state; - wait_event_interruptible_timeout(ipath_sma_state_wait, + dd->ipath_state_wanted = state; + wait_event_interruptible_timeout(ipath_state_wait, (dd->ipath_flags & state), msecs_to_jiffies(msecs)); - dd->ipath_sma_state_wanted = 0; + dd->ipath_state_wanted = 0; if (!(dd->ipath_flags & state)) { u64 val; - ipath_cdbg(SMA, "Didn't reach linkstate %s within %u ms\n", + ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u" + " ms\n", /* test INIT ahead of DOWN, both can be set */ (state & IPATH_LINKINIT) ? "INIT" : ((state & IPATH_LINKDOWN) ? "DOWN" : @@ -807,58 +813,6 @@ bail: return skb; } -/** - * ipath_rcv_layer - receive a packet for the layered (ethernet) driver - * @dd: the infinipath device - * @etail: the sk_buff number - * @tlen: the total packet length - * @hdr: the ethernet header - * - * Separate routine for better overall optimization - */ -static void ipath_rcv_layer(struct ipath_devdata *dd, u32 etail, - u32 tlen, struct ether_header *hdr) -{ - u32 elen; - u8 pad, *bthbytes; - struct sk_buff *skb, *nskb; - - if (dd->ipath_port0_skbs && - hdr->sub_opcode == IPATH_ITH4X_OPCODE_ENCAP) { - /* - * Allocate a new sk_buff to replace the one we give - * to the network stack. - */ - nskb = ipath_alloc_skb(dd, GFP_ATOMIC); - if (!nskb) { - /* count OK packets that we drop */ - ipath_stats.sps_krdrops++; - return; - } - - bthbytes = (u8 *) hdr->bth; - pad = (bthbytes[1] >> 4) & 3; - /* +CRC32 */ - elen = tlen - (sizeof(*hdr) + pad + sizeof(u32)); - - skb = dd->ipath_port0_skbs[etail]; - dd->ipath_port0_skbs[etail] = nskb; - skb_put(skb, elen); - - dd->ipath_f_put_tid(dd, etail + (u64 __iomem *) - ((char __iomem *) dd->ipath_kregbase - + dd->ipath_rcvegrbase), 0, - virt_to_phys(nskb->data)); - - __ipath_layer_rcv(dd, hdr, skb); - - /* another ether packet received */ - ipath_stats.sps_ether_rpkts++; - } - else if (hdr->sub_opcode == IPATH_ITH4X_OPCODE_LID_ARP) - __ipath_layer_rcv_lid(dd, hdr); -} - static void ipath_rcv_hdrerr(struct ipath_devdata *dd, u32 eflags, u32 l, @@ -972,26 +926,17 @@ reloop: if (unlikely(eflags)) ipath_rcv_hdrerr(dd, eflags, l, etail, rc); else if (etype == RCVHQ_RCV_TYPE_NON_KD) { - int ret = __ipath_verbs_rcv(dd, rc + 1, - ebuf, tlen); - if (ret == -ENODEV) - ipath_cdbg(VERBOSE, - "received IB packet, " - "not SMA (QP=%x)\n", qp); - if (dd->ipath_lli_counter) - dd->ipath_lli_counter--; - - } else if (etype == RCVHQ_RCV_TYPE_EAGER) { - if (qp == IPATH_KD_QP && - bthbytes[0] == ipath_layer_rcv_opcode && - ebuf) - ipath_rcv_layer(dd, etail, tlen, - (struct ether_header *)hdr); - else - ipath_cdbg(PKT, "typ %x, opcode %x (eager, " - "qp=%x), len %x; ignored\n", - etype, bthbytes[0], qp, tlen); + ipath_ib_rcv(dd->verbs_dev, rc + 1, ebuf, tlen); + if (dd->ipath_lli_counter) + dd->ipath_lli_counter--; + ipath_cdbg(PKT, "typ %x, opcode %x (eager, " + "qp=%x), len %x; ignored\n", + etype, bthbytes[0], qp, tlen); } + else if (etype == RCVHQ_RCV_TYPE_EAGER) + ipath_cdbg(PKT, "typ %x, opcode %x (eager, " + "qp=%x), len %x; ignored\n", + etype, bthbytes[0], qp, tlen); else if (etype == RCVHQ_RCV_TYPE_EXPECTED) ipath_dbg("Bug: Expected TID, opcode %x; ignored\n", be32_to_cpu(hdr->bth[0]) & 0xff); @@ -1024,7 +969,8 @@ reloop: */ if (l == hdrqtail || (i && !(i&0xf))) { u64 lval; - if (l == hdrqtail) /* PE-800 interrupt only on last */ + if (l == hdrqtail) + /* request IBA6120 interrupt only on last */ lval = dd->ipath_rhdrhead_intr_off | l; else lval = l; @@ -1038,7 +984,7 @@ reloop: } if (!dd->ipath_rhdrhead_intr_off && !reloop) { - /* HT-400 workaround; we can have a race clearing chip + /* IBA6110 workaround; we can have a race clearing chip * interrupt with another interrupt about to be delivered, * and can clear it before it is delivered on the GPIO * workaround. By doing the extra check here for the @@ -1211,7 +1157,7 @@ int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize) * * do appropriate marking as busy, etc. * returns buffer number if one found (>=0), negative number is error. - * Used by ipath_sma_send_pkt and ipath_layer_send + * Used by ipath_layer_send */ u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 * pbufnum) { @@ -1317,13 +1263,6 @@ rescan: goto bail; } - if (updated) - /* - * ran out of bufs, now some (at least this one we just - * got) are now available, so tell the layered driver. - */ - __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE); - /* * set next starting place. Since it's just an optimization, * it doesn't matter who wins on this, so no locking @@ -1500,7 +1439,7 @@ int ipath_waitfor_mdio_cmdready(struct ipath_devdata *dd) return ret; } -void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) +static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) { static const char *what[4] = { [0] = "DOWN", @@ -1511,7 +1450,7 @@ void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) int linkcmd = (which >> INFINIPATH_IBCC_LINKCMD_SHIFT) & INFINIPATH_IBCC_LINKCMD_MASK; - ipath_cdbg(SMA, "Trying to move unit %u to %s, current ltstate " + ipath_cdbg(VERBOSE, "Trying to move unit %u to %s, current ltstate " "is %s\n", dd->ipath_unit, what[linkcmd], ipath_ibcstatus_str[ @@ -1520,7 +1459,7 @@ void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]); /* flush all queued sends when going to DOWN or INIT, to be sure that - * they don't block SMA and other MAD packets */ + * they don't block MAD packets */ if (!linkcmd || linkcmd == INFINIPATH_IBCC_LINKCMD_INIT) { ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, INFINIPATH_S_ABORT); @@ -1534,6 +1473,180 @@ void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) dd->ipath_ibcctrl | which); } +int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate) +{ + u32 lstate; + int ret; + + switch (newstate) { + case IPATH_IB_LINKDOWN: + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_POLL << + INFINIPATH_IBCC_LINKINITCMD_SHIFT); + /* don't wait */ + ret = 0; + goto bail; + + case IPATH_IB_LINKDOWN_SLEEP: + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_SLEEP << + INFINIPATH_IBCC_LINKINITCMD_SHIFT); + /* don't wait */ + ret = 0; + goto bail; + + case IPATH_IB_LINKDOWN_DISABLE: + ipath_set_ib_lstate(dd, + INFINIPATH_IBCC_LINKINITCMD_DISABLE << + INFINIPATH_IBCC_LINKINITCMD_SHIFT); + /* don't wait */ + ret = 0; + goto bail; + + case IPATH_IB_LINKINIT: + if (dd->ipath_flags & IPATH_LINKINIT) { + ret = 0; + goto bail; + } + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_INIT << + INFINIPATH_IBCC_LINKCMD_SHIFT); + lstate = IPATH_LINKINIT; + break; + + case IPATH_IB_LINKARM: + if (dd->ipath_flags & IPATH_LINKARMED) { + ret = 0; + goto bail; + } + if (!(dd->ipath_flags & + (IPATH_LINKINIT | IPATH_LINKACTIVE))) { + ret = -EINVAL; + goto bail; + } + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED << + INFINIPATH_IBCC_LINKCMD_SHIFT); + /* + * Since the port can transition to ACTIVE by receiving + * a non VL 15 packet, wait for either state. + */ + lstate = IPATH_LINKARMED | IPATH_LINKACTIVE; + break; + + case IPATH_IB_LINKACTIVE: + if (dd->ipath_flags & IPATH_LINKACTIVE) { + ret = 0; + goto bail; + } + if (!(dd->ipath_flags & IPATH_LINKARMED)) { + ret = -EINVAL; + goto bail; + } + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE << + INFINIPATH_IBCC_LINKCMD_SHIFT); + lstate = IPATH_LINKACTIVE; + break; + + default: + ipath_dbg("Invalid linkstate 0x%x requested\n", newstate); + ret = -EINVAL; + goto bail; + } + ret = ipath_wait_linkstate(dd, lstate, 2000); + +bail: + return ret; +} + +/** + * ipath_set_mtu - set the MTU + * @dd: the infinipath device + * @arg: the new MTU + * + * we can handle "any" incoming size, the issue here is whether we + * need to restrict our outgoing size. For now, we don't do any + * sanity checking on this, and we don't deal with what happens to + * programs that are already running when the size changes. + * NOTE: changing the MTU will usually cause the IBC to go back to + * link initialize (IPATH_IBSTATE_INIT) state... + */ +int ipath_set_mtu(struct ipath_devdata *dd, u16 arg) +{ + u32 piosize; + int changed = 0; + int ret; + + /* + * mtu is IB data payload max. It's the largest power of 2 less + * than piosize (or even larger, since it only really controls the + * largest we can receive; we can send the max of the mtu and + * piosize). We check that it's one of the valid IB sizes. + */ + if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 && + arg != 4096) { + ipath_dbg("Trying to set invalid mtu %u, failing\n", arg); + ret = -EINVAL; + goto bail; + } + if (dd->ipath_ibmtu == arg) { + ret = 0; /* same as current */ + goto bail; + } + + piosize = dd->ipath_ibmaxlen; + dd->ipath_ibmtu = arg; + + if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) { + /* Only if it's not the initial value (or reset to it) */ + if (piosize != dd->ipath_init_ibmaxlen) { + dd->ipath_ibmaxlen = piosize; + changed = 1; + } + } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) { + piosize = arg + IPATH_PIO_MAXIBHDR; + ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x " + "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize, + arg); + dd->ipath_ibmaxlen = piosize; + changed = 1; + } + + if (changed) { + /* + * set the IBC maxpktlength to the size of our pio + * buffers in words + */ + u64 ibc = dd->ipath_ibcctrl; + ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK << + INFINIPATH_IBCC_MAXPKTLEN_SHIFT); + + piosize = piosize - 2 * sizeof(u32); /* ignore pbc */ + dd->ipath_ibmaxlen = piosize; + piosize /= sizeof(u32); /* in words */ + /* + * for ICRC, which we only send in diag test pkt mode, and + * we don't need to worry about that for mtu + */ + piosize += 1; + + ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + dd->ipath_ibcctrl = ibc; + ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, + dd->ipath_ibcctrl); + dd->ipath_f_tidtemplate(dd); + } + + ret = 0; + +bail: + return ret; +} + +int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc) +{ + dd->ipath_lid = arg; + dd->ipath_lmc = lmc; + + return 0; +} + /** * ipath_read_kreg64_port - read a device's per-port 64-bit kernel register * @dd: the infinipath device @@ -1637,13 +1750,6 @@ void ipath_shutdown_device(struct ipath_devdata *dd) ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_DISABLE << INFINIPATH_IBCC_LINKINITCMD_SHIFT); - /* - * we are shutting down, so tell the layered driver. We don't do - * this on just a link state change, much like ethernet, a cable - * unplug, etc. doesn't change driver state - */ - ipath_layer_intr(dd, IPATH_LAYER_INT_IF_DOWN); - /* disable IBC */ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; ipath_write_kreg(dd, dd->ipath_kregs->kr_control, @@ -1743,7 +1849,7 @@ static int __init infinipath_init(void) { int ret; - ipath_dbg(KERN_INFO DRIVER_LOAD_MSG "%s", ipath_core_version); + ipath_dbg(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version); /* * These must be called before the driver is registered with @@ -1776,8 +1882,18 @@ static int __init infinipath_init(void) goto bail_group; } + ret = ipath_diagpkt_add(); + if (ret < 0) { + printk(KERN_ERR IPATH_DRV_NAME ": Unable to create " + "diag data device: error %d\n", -ret); + goto bail_ipathfs; + } + goto bail; +bail_ipathfs: + ipath_exit_ipathfs(); + bail_group: ipath_driver_remove_group(&ipath_driver.driver); @@ -1888,6 +2004,8 @@ static void __exit infinipath_cleanup(void) struct ipath_devdata *dd, *tmp; unsigned long flags; + ipath_diagpkt_remove(); + ipath_exit_ipathfs(); ipath_driver_remove_group(&ipath_driver.driver); @@ -1998,5 +2116,22 @@ bail: return ret; } +int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv) +{ + u64 val; + if ( new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK ) { + return -1; + } + if ( dd->ipath_rx_pol_inv != new_pol_inv ) { + dd->ipath_rx_pol_inv = new_pol_inv; + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); + val &= ~(INFINIPATH_XGXS_RX_POL_MASK << + INFINIPATH_XGXS_RX_POL_SHIFT); + val |= ((u64)dd->ipath_rx_pol_inv) << + INFINIPATH_XGXS_RX_POL_SHIFT; + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); + } + return 0; +} module_init(infinipath_init); module_exit(infinipath_cleanup); |
