diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/at91_adc.c | 340 |
1 files changed, 292 insertions, 48 deletions
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 89777ed..3b5bacd 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -31,7 +31,108 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> -#include <mach/at91_adc.h> +/* Registers */ +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */ +#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */ +#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) +#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_PENDBC_(x) ((x) << 28) + +#define AT91_ADC_TSR 0x0C +#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ +#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ +#define AT91RL_ADC_IER_PEN (1 << 20) +#define AT91RL_ADC_IER_NOPEN (1 << 21) +#define AT91_ADC_IER_PEN (1 << 29) +#define AT91_ADC_IER_NOPEN (1 << 30) +#define AT91_ADC_IER_XRDY (1 << 20) +#define AT91_ADC_IER_YRDY (1 << 21) +#define AT91_ADC_IER_PRDY (1 << 22) +#define AT91_ADC_ISR_PENS (1 << 31) + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ + +#define AT91_ADC_ACR 0x94 /* Analog Control Register */ +#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ + +#define AT91_ADC_TSMR 0xB0 +#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ +#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) +#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) +#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ +#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) +#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ +#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) +#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ +#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ +#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ + +#define AT91_ADC_TSXPOSR 0xB4 +#define AT91_ADC_TSYPOSR 0xB8 +#define AT91_ADC_TSPRESSR 0xBC + +#define AT91_ADC_TRGR_9260 AT91_ADC_MR +#define AT91_ADC_TRGR_9G45 0x08 +#define AT91_ADC_TRGR_9X5 0xC0 + +/* Trigger Register bit field */ +#define AT91_ADC_TRGR_TRGPER (0xffff << 16) +#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) +#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) +#define AT91_ADC_TRGR_NONE (0 << 0) +#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) #define AT91_ADC_CHAN(st, ch) \ (st->registers->channel_base + (ch * 4)) @@ -46,6 +147,29 @@ #define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ #define TOUCH_PEN_DETECT_DEBOUNCE_US 200 +#define MAX_RLPOS_BITS 10 +#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */ +#define TOUCH_SHTIM 0xa + +/** + * struct at91_adc_reg_desc - Various informations relative to registers + * @channel_base: Base offset for the channel data registers + * @drdy_mask: Mask of the DRDY field in the relevant registers + (Interruptions registers mostly) + * @status_register: Offset of the Interrupt Status Register + * @trigger_register: Offset of the Trigger setup register + * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register + * @mr_startup_mask: Mask of the STARTUP field in the adc MR register + */ +struct at91_adc_reg_desc { + u8 channel_base; + u32 drdy_mask; + u8 status_register; + u8 trigger_register; + u32 mr_prescal_mask; + u32 mr_startup_mask; +}; + struct at91_adc_caps { bool has_ts; /* Support touch screen */ bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */ @@ -64,12 +188,6 @@ struct at91_adc_caps { struct at91_adc_reg_desc registers; }; -enum atmel_adc_ts_type { - ATMEL_ADC_TOUCHSCREEN_NONE = 0, - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, -}; - struct at91_adc_state { struct clk *adc_clk; u16 *buffer; @@ -114,6 +232,11 @@ struct at91_adc_state { u16 ts_sample_period_val; u32 ts_pressure_threshold; + u16 ts_pendbc; + + bool ts_bufferedmeasure; + u32 ts_prev_absx; + u32 ts_prev_absy; }; static irqreturn_t at91_adc_trigger_handler(int irq, void *p) @@ -220,7 +343,72 @@ static int at91_ts_sample(struct at91_adc_state *st) return 0; } -static irqreturn_t at91_adc_interrupt(int irq, void *private) +static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) +{ + struct iio_dev *idev = private; + struct at91_adc_state *st = iio_priv(idev); + u32 status = at91_adc_readl(st, st->registers->status_register); + unsigned int reg; + + status &= at91_adc_readl(st, AT91_ADC_IMR); + if (status & st->registers->drdy_mask) + handle_adc_eoc_trigger(irq, idev); + + if (status & AT91RL_ADC_IER_PEN) { + /* Disabling pen debounce is required to get a NOPEN irq */ + reg = at91_adc_readl(st, AT91_ADC_MR); + reg &= ~AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN + | AT91_ADC_EOC(3)); + /* Set up period trigger for sampling */ + at91_adc_writel(st, st->registers->trigger_register, + AT91_ADC_TRGR_MOD_PERIOD_TRIG | + AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); + } else if (status & AT91RL_ADC_IER_NOPEN) { + reg = at91_adc_readl(st, AT91_ADC_MR); + reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + at91_adc_writel(st, st->registers->trigger_register, + AT91_ADC_TRGR_NONE); + + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN + | AT91_ADC_EOC(3)); + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); + st->ts_bufferedmeasure = false; + input_report_key(st->ts_input, BTN_TOUCH, 0); + input_sync(st->ts_input); + } else if (status & AT91_ADC_EOC(3)) { + /* Conversion finished */ + if (st->ts_bufferedmeasure) { + /* + * Last measurement is always discarded, since it can + * be erroneous. + * Always report previous measurement + */ + input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx); + input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy); + input_report_key(st->ts_input, BTN_TOUCH, 1); + input_sync(st->ts_input); + } else + st->ts_bufferedmeasure = true; + + /* Now make new measurement */ + st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3)) + << MAX_RLPOS_BITS; + st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2)); + + st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1)) + << MAX_RLPOS_BITS; + st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0)); + } + + return IRQ_HANDLED; +} + +static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) { struct iio_dev *idev = private; struct at91_adc_state *st = iio_priv(idev); @@ -653,6 +841,8 @@ static int at91_adc_probe_dt_ts(struct device_node *node, return -EINVAL; } + if (!st->caps->has_tsmr) + return 0; prop = 0; of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop); st->ts_pressure_threshold = prop; @@ -776,6 +966,7 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st, st->trigger_number = pdata->trigger_number; st->trigger_list = pdata->trigger_list; st->registers = &st->caps->registers; + st->touchscreen_type = pdata->touchscreen_type; return 0; } @@ -790,7 +981,10 @@ static int atmel_ts_open(struct input_dev *dev) { struct at91_adc_state *st = input_get_drvdata(dev); - at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); + if (st->caps->has_tsmr) + at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); + else + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); return 0; } @@ -798,45 +992,61 @@ static void atmel_ts_close(struct input_dev *dev) { struct at91_adc_state *st = input_get_drvdata(dev); - at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); + if (st->caps->has_tsmr) + at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); + else + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); } static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) { - u32 reg = 0, pendbc; + u32 reg = 0; int i = 0; - if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) - reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; - else - reg = AT91_ADC_TSMR_TSMODE_5WIRE; - /* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid * pen detect noise. * The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock */ - pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1); + st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / + 1000, 1); - while (pendbc >> ++i) + while (st->ts_pendbc >> ++i) ; /* Empty! Find the shift offset */ - if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1)))) - pendbc = i; + if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1)))) + st->ts_pendbc = i; else - pendbc = i - 1; + st->ts_pendbc = i - 1; - if (st->caps->has_tsmr) { - reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) - & AT91_ADC_TSMR_TSAV; - reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC; - reg |= AT91_ADC_TSMR_NOTSDMA; - reg |= AT91_ADC_TSMR_PENDET_ENA; - reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */ - - at91_adc_writel(st, AT91_ADC_TSMR, reg); - } else { - /* TODO: for 9g45 which has no TSMR */ + if (!st->caps->has_tsmr) { + reg = at91_adc_readl(st, AT91_ADC_MR); + reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET; + + reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + + reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM; + at91_adc_writel(st, AT91_ADC_TSR, reg); + + st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL * + adc_clk_khz / 1000) - 1, 1); + + return 0; } + if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) + reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; + else + reg = AT91_ADC_TSMR_TSMODE_5WIRE; + + reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) + & AT91_ADC_TSMR_TSAV; + reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC; + reg |= AT91_ADC_TSMR_NOTSDMA; + reg |= AT91_ADC_TSMR_PENDET_ENA; + reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */ + + at91_adc_writel(st, AT91_ADC_TSMR, reg); + /* Change adc internal resistor value for better pen detection, * default value is 100 kOhm. * 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm @@ -845,7 +1055,7 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity & AT91_ADC_ACR_PENDETSENS); - /* Sample Peroid Time = (TRGPER + 1) / ADCClock */ + /* Sample Period Time = (TRGPER + 1) / ADCClock */ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US * adc_clk_khz / 1000) - 1, 1); @@ -874,18 +1084,38 @@ static int at91_ts_register(struct at91_adc_state *st, __set_bit(EV_ABS, input->evbit); __set_bit(EV_KEY, input->evbit); __set_bit(BTN_TOUCH, input->keybit); - input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0); - input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); + if (st->caps->has_tsmr) { + input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); + } else { + if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) { + dev_err(&pdev->dev, + "This touchscreen controller only support 4 wires\n"); + ret = -EINVAL; + goto err; + } + + input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1, + 0, 0); + } st->ts_input = input; input_set_drvdata(input, st); ret = input_register_device(input); if (ret) - input_free_device(st->ts_input); + goto err; return ret; + +err: + input_free_device(st->ts_input); + return ret; } static void at91_ts_unregister(struct at91_adc_state *st) @@ -943,11 +1173,13 @@ static int at91_adc_probe(struct platform_device *pdev) */ at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST); at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); - ret = request_irq(st->irq, - at91_adc_interrupt, - 0, - pdev->dev.driver->name, - idev); + + if (st->caps->has_tsmr) + ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, + pdev->dev.driver->name, idev); + else + ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, + pdev->dev.driver->name, idev); if (ret) { dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); return ret; @@ -1051,12 +1283,6 @@ static int at91_adc_probe(struct platform_device *pdev) goto error_disable_adc_clk; } } else { - if (!st->caps->has_tsmr) { - dev_err(&pdev->dev, "We don't support non-TSMR adc\n"); - ret = -ENODEV; - goto error_disable_adc_clk; - } - ret = at91_ts_register(st, pdev); if (ret) goto error_disable_adc_clk; @@ -1120,6 +1346,20 @@ static struct at91_adc_caps at91sam9260_caps = { }, }; +static struct at91_adc_caps at91sam9rl_caps = { + .has_ts = true, + .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ + .num_channels = 6, + .registers = { + .channel_base = AT91_ADC_CHR(0), + .drdy_mask = AT91_ADC_DRDY, + .status_register = AT91_ADC_SR, + .trigger_register = AT91_ADC_TRGR_9G45, + .mr_prescal_mask = AT91_ADC_PRESCAL_9260, + .mr_startup_mask = AT91_ADC_STARTUP_9G45, + }, +}; + static struct at91_adc_caps at91sam9g45_caps = { .has_ts = true, .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ @@ -1154,6 +1394,7 @@ static struct at91_adc_caps at91sam9x5_caps = { static const struct of_device_id at91_adc_dt_ids[] = { { .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps }, + { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps }, { .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps }, { .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps }, {}, @@ -1165,6 +1406,9 @@ static const struct platform_device_id at91_adc_ids[] = { .name = "at91sam9260-adc", .driver_data = (unsigned long)&at91sam9260_caps, }, { + .name = "at91sam9rl-adc", + .driver_data = (unsigned long)&at91sam9rl_caps, + }, { .name = "at91sam9g45-adc", .driver_data = (unsigned long)&at91sam9g45_caps, }, { |
