diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7793.c | 4 | ||||
| -rw-r--r-- | drivers/iio/adc/ad_sigma_delta.c | 28 | ||||
| -rw-r--r-- | drivers/iio/adc/at91-sama5d2_adc.c | 45 | ||||
| -rw-r--r-- | drivers/iio/adc/mcp320x.c | 25 | ||||
| -rw-r--r-- | drivers/iio/adc/stm32-adc.c | 2 | ||||
| -rw-r--r-- | drivers/iio/adc/ti-ads1015.c | 8 | ||||
| -rw-r--r-- | drivers/iio/adc/twl4030-madc.c | 14 | ||||
| -rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_core.c | 11 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_simple_dummy_events.c | 1 | ||||
| -rw-r--r-- | drivers/iio/industrialio-core.c | 4 | ||||
| -rw-r--r-- | drivers/iio/magnetometer/st_magn_core.c | 4 | ||||
| -rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 2 | ||||
| -rw-r--r-- | drivers/iio/pressure/zpa2326.c | 10 | ||||
| -rw-r--r-- | drivers/iio/proximity/as3935.c | 43 | ||||
| -rw-r--r-- | drivers/iio/trigger/stm32-timer-trigger.c | 4 |
16 files changed, 158 insertions, 49 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 5762565..1d13bf0 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -243,6 +243,8 @@ config DA9150_GPADC config DLN2_ADC tristate "Diolan DLN-2 ADC driver support" depends on MFD_DLN2 + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Diolan DLN-2 ADC. diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index e6706a0..47c3d7f 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -257,7 +257,7 @@ static int ad7793_setup(struct iio_dev *indio_dev, unsigned int vref_mv) { struct ad7793_state *st = iio_priv(indio_dev); - int i, ret = -1; + int i, ret; unsigned long long scale_uv; u32 id; @@ -266,7 +266,7 @@ static int ad7793_setup(struct iio_dev *indio_dev, return ret; /* reset the serial interface */ - ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret)); + ret = ad_sd_reset(&st->sd, 32); if (ret < 0) goto out; usleep_range(500, 2000); /* Wait for at least 500us */ diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index d10bd0c..22c4c17 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -177,6 +177,34 @@ out: } EXPORT_SYMBOL_GPL(ad_sd_read_reg); +/** + * ad_sd_reset() - Reset the serial interface + * + * @sigma_delta: The sigma delta device + * @reset_length: Number of SCLKs with DIN = 1 + * + * Returns 0 on success, an error code otherwise. + **/ +int ad_sd_reset(struct ad_sigma_delta *sigma_delta, + unsigned int reset_length) +{ + uint8_t *buf; + unsigned int size; + int ret; + + size = DIV_ROUND_UP(reset_length, 8); + buf = kcalloc(size, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memset(buf, 0xff, size); + ret = spi_write(sigma_delta->spi, buf, size); + kfree(buf); + + return ret; +} +EXPORT_SYMBOL_GPL(ad_sd_reset); + static int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta, unsigned int mode, unsigned int channel) { diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index bc5b38e..a70ef7f 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -225,6 +225,7 @@ struct at91_adc_trigger { char *name; unsigned int trgmod_value; unsigned int edge_type; + bool hw_trig; }; struct at91_adc_state { @@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = { .name = "external_rising", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE, .edge_type = IRQ_TYPE_EDGE_RISING, + .hw_trig = true, }, { .name = "external_falling", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL, .edge_type = IRQ_TYPE_EDGE_FALLING, + .hw_trig = true, }, { .name = "external_any", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY, .edge_type = IRQ_TYPE_EDGE_BOTH, + .hw_trig = true, + }, + { + .name = "software", + .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER, + .edge_type = IRQ_TYPE_NONE, + .hw_trig = false, }, }; @@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev) struct at91_adc_state *st; struct resource *res; int ret, i; - u32 edge_type; + u32 edge_type = IRQ_TYPE_NONE; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); if (!indio_dev) @@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "atmel,trigger-edge-type", &edge_type); if (ret) { - dev_err(&pdev->dev, - "invalid or missing value for atmel,trigger-edge-type\n"); - return ret; + dev_dbg(&pdev->dev, + "atmel,trigger-edge-type not specified, only software trigger available\n"); } st->selected_trig = NULL; - for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++) + /* find the right trigger, or no trigger at all */ + for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++) if (at91_adc_trigger_list[i].edge_type == edge_type) { st->selected_trig = &at91_adc_trigger_list[i]; break; @@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, indio_dev); - ret = at91_adc_buffer_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); - goto per_clk_disable_unprepare; - } + if (st->selected_trig->hw_trig) { + ret = at91_adc_buffer_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); + goto per_clk_disable_unprepare; + } - ret = at91_adc_trigger_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't setup the triggers.\n"); - goto per_clk_disable_unprepare; + ret = at91_adc_trigger_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't setup the triggers.\n"); + goto per_clk_disable_unprepare; + } } ret = iio_device_register(indio_dev); if (ret < 0) goto per_clk_disable_unprepare; - dev_info(&pdev->dev, "setting up trigger as %s\n", - st->selected_trig->name); + if (st->selected_trig->hw_trig) + dev_info(&pdev->dev, "setting up trigger as %s\n", + st->selected_trig->name); dev_info(&pdev->dev, "version: %x\n", readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index 634717a..071dd23 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -17,6 +17,8 @@ * MCP3204 * MCP3208 * ------------ + * 13 bit converter + * MCP3301 * * Datasheet can be found here: * http://ww1.microchip.com/downloads/en/DeviceDoc/21293C.pdf mcp3001 @@ -96,7 +98,7 @@ static int mcp320x_channel_to_tx_data(int device_index, } static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel, - bool differential, int device_index) + bool differential, int device_index, int *val) { int ret; @@ -117,19 +119,25 @@ static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel, switch (device_index) { case mcp3001: - return (adc->rx_buf[0] << 5 | adc->rx_buf[1] >> 3); + *val = (adc->rx_buf[0] << 5 | adc->rx_buf[1] >> 3); + return 0; case mcp3002: case mcp3004: case mcp3008: - return (adc->rx_buf[0] << 2 | adc->rx_buf[1] >> 6); + *val = (adc->rx_buf[0] << 2 | adc->rx_buf[1] >> 6); + return 0; case mcp3201: - return (adc->rx_buf[0] << 7 | adc->rx_buf[1] >> 1); + *val = (adc->rx_buf[0] << 7 | adc->rx_buf[1] >> 1); + return 0; case mcp3202: case mcp3204: case mcp3208: - return (adc->rx_buf[0] << 4 | adc->rx_buf[1] >> 4); + *val = (adc->rx_buf[0] << 4 | adc->rx_buf[1] >> 4); + return 0; case mcp3301: - return sign_extend32((adc->rx_buf[0] & 0x1f) << 8 | adc->rx_buf[1], 12); + *val = sign_extend32((adc->rx_buf[0] & 0x1f) << 8 + | adc->rx_buf[1], 12); + return 0; default: return -EINVAL; } @@ -150,12 +158,10 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = mcp320x_adc_conversion(adc, channel->address, - channel->differential, device_index); - + channel->differential, device_index, val); if (ret < 0) goto out; - *val = ret; ret = IIO_VAL_INT; break; @@ -312,6 +318,7 @@ static int mcp320x_probe(struct spi_device *spi) indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &mcp320x_info; + spi_set_drvdata(spi, indio_dev); chip_info = &mcp320x_chip_infos[spi_get_device_id(spi)->driver_data]; indio_dev->channels = chip_info->channels; diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index e3c15f8..4df32cf 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -1666,7 +1666,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev) num_channels = of_property_count_u32_elems(node, "st,adc-channels"); if (num_channels < 0 || - num_channels >= adc_info->max_channels) { + num_channels > adc_info->max_channels) { dev_err(&indio_dev->dev, "Bad st,adc-channels?\n"); return num_channels < 0 ? num_channels : -EINVAL; } diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index d121002..e0dc204 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -52,7 +52,7 @@ #define ADS1015_CFG_COMP_QUE_MASK GENMASK(1, 0) #define ADS1015_CFG_COMP_LAT_MASK BIT(2) -#define ADS1015_CFG_COMP_POL_MASK BIT(2) +#define ADS1015_CFG_COMP_POL_MASK BIT(3) #define ADS1015_CFG_COMP_MODE_MASK BIT(4) #define ADS1015_CFG_DR_MASK GENMASK(7, 5) #define ADS1015_CFG_MOD_MASK BIT(8) @@ -1017,10 +1017,12 @@ static int ads1015_probe(struct i2c_client *client, switch (irq_trig) { case IRQF_TRIGGER_LOW: - cfg_comp |= ADS1015_CFG_COMP_POL_LOW; + cfg_comp |= ADS1015_CFG_COMP_POL_LOW << + ADS1015_CFG_COMP_POL_SHIFT; break; case IRQF_TRIGGER_HIGH: - cfg_comp |= ADS1015_CFG_COMP_POL_HIGH; + cfg_comp |= ADS1015_CFG_COMP_POL_HIGH << + ADS1015_CFG_COMP_POL_SHIFT; break; default: return -EINVAL; diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index 1edd99f..e3cfb91 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -887,21 +887,27 @@ static int twl4030_madc_probe(struct platform_device *pdev) /* Enable 3v1 bias regulator for MADC[3:6] */ madc->usb3v1 = devm_regulator_get(madc->dev, "vusb3v1"); - if (IS_ERR(madc->usb3v1)) - return -ENODEV; + if (IS_ERR(madc->usb3v1)) { + ret = -ENODEV; + goto err_i2c; + } ret = regulator_enable(madc->usb3v1); - if (ret) + if (ret) { dev_err(madc->dev, "could not enable 3v1 bias regulator\n"); + goto err_i2c; + } ret = iio_device_register(iio_dev); if (ret) { dev_err(&pdev->dev, "could not register iio device\n"); - goto err_i2c; + goto err_usb3v1; } return 0; +err_usb3v1: + regulator_disable(madc->usb3v1); err_i2c: twl4030_madc_set_current_generator(madc, 0, 0); err_current_generator: diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index d99bb14..02e833b 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -463,8 +463,17 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) u8 drdy_mask; struct st_sensor_data *sdata = iio_priv(indio_dev); - if (!sdata->sensor_settings->drdy_irq.addr) + if (!sdata->sensor_settings->drdy_irq.addr) { + /* + * there are some devices (e.g. LIS3MDL) where drdy line is + * routed to a given pin and it is not possible to select a + * different one. Take into account irq status register + * to understand if irq trigger can be properly supported + */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) + sdata->hw_irq_trigger = enable; return 0; + } /* Enable/Disable the interrupt generator 1. */ if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) { diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c index ed63ffd..7ec2a0b 100644 --- a/drivers/iio/dummy/iio_simple_dummy_events.c +++ b/drivers/iio/dummy/iio_simple_dummy_events.c @@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev, st->event_en = state; else return -EINVAL; + break; default: return -EINVAL; } diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 17ec4ce..a47428b 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -310,8 +310,10 @@ static ssize_t iio_debugfs_read_reg(struct file *file, char __user *userbuf, ret = indio_dev->info->debugfs_reg_access(indio_dev, indio_dev->cached_reg_addr, 0, &val); - if (ret) + if (ret) { dev_err(indio_dev->dev.parent, "%s: read failed\n", __func__); + return ret; + } len = snprintf(buf, sizeof(buf), "0x%X\n", val); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index e68368b..08aafba 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -315,6 +315,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { }, }, }, + .drdy_irq = { + /* drdy line is routed drdy pin */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, + }, .multi_read_bit = true, .bootime = 2, }, diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 0d2ea3e..8f26428 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -573,7 +573,7 @@ static int bmp280_chip_config(struct bmp280_data *data) u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | BMP280_OSRS_PRESS_X(data->oversampling_press + 1); - ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c index ebfb1de..9143145 100644 --- a/drivers/iio/pressure/zpa2326.c +++ b/drivers/iio/pressure/zpa2326.c @@ -865,7 +865,6 @@ complete: static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev, struct zpa2326_private *private) { - int ret; unsigned int val; long timeout; @@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev, /* Timed out. */ zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)", timeout); - ret = -ETIME; - } else if (timeout < 0) { - zpa2326_warn(indio_dev, - "wait for one shot interrupt cancelled"); - ret = -ERESTARTSYS; + return -ETIME; } - return ret; + zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled"); + return -ERESTARTSYS; } static int zpa2326_init_managed_irq(struct device *parent, diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 0eeff29..4a48b7b 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -39,8 +39,12 @@ #define AS3935_AFE_GAIN_MAX 0x1F #define AS3935_AFE_PWR_BIT BIT(0) +#define AS3935_NFLWDTH 0x01 +#define AS3935_NFLWDTH_MASK 0x7f + #define AS3935_INT 0x03 #define AS3935_INT_MASK 0x0f +#define AS3935_DISTURB_INT BIT(2) #define AS3935_EVENT_INT BIT(3) #define AS3935_NOISE_INT BIT(0) @@ -48,6 +52,7 @@ #define AS3935_DATA_MASK 0x3F #define AS3935_TUNE_CAP 0x08 +#define AS3935_DEFAULTS 0x3C #define AS3935_CALIBRATE 0x3D #define AS3935_READ_DATA BIT(14) @@ -62,7 +67,9 @@ struct as3935_state { struct mutex lock; struct delayed_work work; + unsigned long noise_tripped; u32 tune_cap; + u32 nflwdth_reg; u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */ u8 buf[2] ____cacheline_aligned; }; @@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev, return len; } +static ssize_t as3935_noise_level_tripped_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct as3935_state *st = iio_priv(dev_to_iio_dev(dev)); + int ret; + + mutex_lock(&st->lock); + ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ)); + mutex_unlock(&st->lock); + + return ret; +} + static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR, as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0); +static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO, + as3935_noise_level_tripped_show, NULL, 0); static struct attribute *as3935_attributes[] = { &iio_dev_attr_sensor_sensitivity.dev_attr.attr, + &iio_dev_attr_noise_level_tripped.dev_attr.attr, NULL, }; @@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work) case AS3935_EVENT_INT: iio_trigger_poll_chained(st->trig); break; + case AS3935_DISTURB_INT: case AS3935_NOISE_INT: + mutex_lock(&st->lock); + st->noise_tripped = jiffies; + mutex_unlock(&st->lock); dev_warn(&st->spi->dev, "noise level is too high\n"); break; } @@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private) static void calibrate_as3935(struct as3935_state *st) { - /* mask disturber interrupt bit */ - as3935_write(st, AS3935_INT, BIT(5)); - + as3935_write(st, AS3935_DEFAULTS, 0x96); as3935_write(st, AS3935_CALIBRATE, 0x96); as3935_write(st, AS3935_TUNE_CAP, BIT(5) | (st->tune_cap / TUNE_CAP_DIV)); mdelay(2); as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV)); + as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg); } #ifdef CONFIG_PM_SLEEP @@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi) return -EINVAL; } + ret = of_property_read_u32(np, + "ams,nflwdth", &st->nflwdth_reg); + if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) { + dev_err(&spi->dev, + "invalid nflwdth setting of %d\n", + st->nflwdth_reg); + return -EINVAL; + } + indio_dev->dev.parent = &spi->dev; indio_dev->name = spi_get_device_id(spi)->name; indio_dev->channels = as3935_channels; @@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi) return -ENOMEM; st->trig = trig; + st->noise_tripped = jiffies - HZ; trig->dev.parent = indio_dev->dev.parent; iio_trigger_set_drvdata(trig, indio_dev); trig->ops = &iio_interrupt_trigger_ops; diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index 9b90534..eb212f8c 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -174,6 +174,7 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv) clk_disable(priv->clk); /* Stop timer */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); regmap_write(priv->regmap, TIM_PSC, 0); regmap_write(priv->regmap, TIM_ARR, 0); @@ -715,8 +716,9 @@ static ssize_t stm32_count_set_preset(struct iio_dev *indio_dev, if (ret) return ret; + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_write(priv->regmap, TIM_ARR, preset); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE); return len; } |
