diff options
Diffstat (limited to 'drivers/iio/pressure')
| -rw-r--r-- | drivers/iio/pressure/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/iio/pressure/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/pressure/hid-sensor-press.c | 376 | ||||
| -rw-r--r-- | drivers/iio/pressure/mpl3115.c | 2 | ||||
| -rw-r--r-- | drivers/iio/pressure/st_pressure.h | 1 | ||||
| -rw-r--r-- | drivers/iio/pressure/st_pressure_core.c | 87 | ||||
| -rw-r--r-- | drivers/iio/pressure/st_pressure_i2c.c | 1 | ||||
| -rw-r--r-- | drivers/iio/pressure/st_pressure_spi.c | 1 |
8 files changed, 476 insertions, 9 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index a8b9cae..d88ff17 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -5,6 +5,20 @@ menu "Pressure sensors" +config HID_SENSOR_PRESS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PRESS" + help + Say yes here to build support for the HID SENSOR + Pressure driver + + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. + config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" depends on I2C @@ -26,7 +40,7 @@ config IIO_ST_PRESS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics pressure - sensors: LPS001WP, LPS331AP. + sensors: LPS001WP, LPS25H, LPS331AP. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 42bb9fc..4a57bf6 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -3,6 +3,7 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o st_pressure-y := st_pressure_core.o diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c new file mode 100644 index 0000000..e0e6409 --- /dev/null +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -0,0 +1,376 @@ +/* + * HID Sensors Driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. + * + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/hid-sensor-hub.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include "../common/hid-sensors/hid-sensor-trigger.h" + +#define CHANNEL_SCAN_INDEX_PRESSURE 0 + +struct press_state { + struct hid_sensor_hub_callbacks callbacks; + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info press_attr; + u32 press_data; +}; + +/* Channel definitions */ +static const struct iio_chan_spec press_channels[] = { + { + .type = IIO_PRESSURE, + .modified = 1, + .channel2 = IIO_NO_MOD, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_PRESSURE, + } +}; + +/* Adjust channel real bits based on report descriptor */ +static void press_adjust_channel_bit_mask(struct iio_chan_spec *channels, + int channel, int size) +{ + channels[channel].scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + channels[channel].scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is u32 */ + channels[channel].scan_type.storagebits = sizeof(u32) * 8; +} + +/* Channel read_raw handler */ +static int press_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct press_state *press_state = iio_priv(indio_dev); + int report_id = -1; + u32 address; + int ret; + int ret_type; + + *val = 0; + *val2 = 0; + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->scan_index) { + case CHANNEL_SCAN_INDEX_PRESSURE: + report_id = press_state->press_attr.report_id; + address = + HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; + break; + default: + report_id = -1; + break; + } + if (report_id >= 0) + *val = sensor_hub_input_attr_get_raw_value( + press_state->common_attributes.hsdev, + HID_USAGE_SENSOR_PRESSURE, address, + report_id); + else { + *val = 0; + return -EINVAL; + } + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = press_state->press_attr.units; + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_OFFSET: + *val = hid_sensor_convert_exponent( + press_state->press_attr.unit_expo); + ret_type = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_read_samp_freq_value( + &press_state->common_attributes, val, val2); + ret_type = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_read_raw_hyst_value( + &press_state->common_attributes, val, val2); + ret_type = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret_type = -EINVAL; + break; + } + + return ret_type; +} + +/* Channel write_raw handler */ +static int press_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct press_state *press_state = iio_priv(indio_dev); + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &press_state->common_attributes, val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &press_state->common_attributes, val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info press_info = { + .driver_module = THIS_MODULE, + .read_raw = &press_read_raw, + .write_raw = &press_write_raw, +}; + +/* Function to push data to buffer */ +static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, + int len) +{ + dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); + iio_push_to_buffers(indio_dev, data); +} + +/* Callback handler to send event after all samples are received and captured */ +static int press_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct press_state *press_state = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "press_proc_event [%d]\n", + press_state->common_attributes.data_ready); + if (press_state->common_attributes.data_ready) + hid_sensor_push_data(indio_dev, + &press_state->press_data, + sizeof(press_state->press_data)); + + return 0; +} + +/* Capture samples in local storage */ +static int press_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned usage_id, + size_t raw_len, char *raw_data, + void *priv) +{ + struct iio_dev *indio_dev = platform_get_drvdata(priv); + struct press_state *press_state = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (usage_id) { + case HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE: + press_state->press_data = *(u32 *)raw_data; + ret = 0; + break; + default: + break; + } + + return ret; +} + +/* Parse report which is specific to an usage id*/ +static int press_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned usage_id, + struct press_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE, + &st->press_attr); + if (ret < 0) + return ret; + press_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_PRESSURE, + st->press_attr.size); + + dev_dbg(&pdev->dev, "press %x:%x\n", st->press_attr.index, + st->press_attr.report_id); + + /* Set Sensitivity field ids, when there is no individual modifier */ + if (st->common_attributes.sensitivity.index < 0) { + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE, + &st->common_attributes.sensitivity); + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", + st->common_attributes.sensitivity.index, + st->common_attributes.sensitivity.report_id); + } + return ret; +} + +/* Function to initialize the processing for usage id */ +static int hid_press_probe(struct platform_device *pdev) +{ + int ret = 0; + static const char *name = "press"; + struct iio_dev *indio_dev; + struct press_state *press_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_chan_spec *channels; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct press_state)); + if (!indio_dev) + return -ENOMEM; + platform_set_drvdata(pdev, indio_dev); + + press_state = iio_priv(indio_dev); + press_state->common_attributes.hsdev = hsdev; + press_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_PRESSURE, + &press_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "failed to setup common attributes\n"); + return ret; + } + + channels = kmemdup(press_channels, sizeof(press_channels), GFP_KERNEL); + if (!channels) { + dev_err(&pdev->dev, "failed to duplicate channels\n"); + return -ENOMEM; + } + + ret = press_parse_report(pdev, hsdev, channels, + HID_USAGE_SENSOR_PRESSURE, press_state); + if (ret) { + dev_err(&pdev->dev, "failed to setup attributes\n"); + goto error_free_dev_mem; + } + + indio_dev->channels = channels; + indio_dev->num_channels = + ARRAY_SIZE(press_channels); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &press_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); + goto error_free_dev_mem; + } + press_state->common_attributes.data_ready = false; + ret = hid_sensor_setup_trigger(indio_dev, name, + &press_state->common_attributes); + if (ret) { + dev_err(&pdev->dev, "trigger setup failed\n"); + goto error_unreg_buffer_funcs; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "device register failed\n"); + goto error_remove_trigger; + } + + press_state->callbacks.send_event = press_proc_event; + press_state->callbacks.capture_sample = press_capture_sample; + press_state->callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PRESSURE, + &press_state->callbacks); + if (ret < 0) { + dev_err(&pdev->dev, "callback reg failed\n"); + goto error_iio_unreg; + } + + return ret; + +error_iio_unreg: + iio_device_unregister(indio_dev); +error_remove_trigger: + hid_sensor_remove_trigger(&press_state->common_attributes); +error_unreg_buffer_funcs: + iio_triggered_buffer_cleanup(indio_dev); +error_free_dev_mem: + kfree(indio_dev->channels); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_press_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct press_state *press_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PRESSURE); + iio_device_unregister(indio_dev); + hid_sensor_remove_trigger(&press_state->common_attributes); + iio_triggered_buffer_cleanup(indio_dev); + kfree(indio_dev->channels); + + return 0; +} + +static struct platform_device_id hid_press_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200031", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_press_ids); + +static struct platform_driver hid_press_platform_driver = { + .id_table = hid_press_ids, + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + }, + .probe = hid_press_probe, + .remove = hid_press_remove, +}; +module_platform_driver(hid_press_platform_driver); + +MODULE_DESCRIPTION("HID Sensor Pressure"); +MODULE_AUTHOR("Archana Patni <archana.patni@intel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c index ac8c8ab..ba6d0c5 100644 --- a/drivers/iio/pressure/mpl3115.c +++ b/drivers/iio/pressure/mpl3115.c @@ -77,7 +77,7 @@ static int mpl3115_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct mpl3115_data *data = iio_priv(indio_dev); - s32 tmp = 0; + __be32 tmp = 0; int ret; switch (mask) { diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h index 049c21a..242943c 100644 --- a/drivers/iio/pressure/st_pressure.h +++ b/drivers/iio/pressure/st_pressure.h @@ -15,6 +15,7 @@ #include <linux/iio/common/st_sensors.h> #define LPS001WP_PRESS_DEV_NAME "lps001wp" +#define LPS25H_PRESS_DEV_NAME "lps25h" #define LPS331AP_PRESS_DEV_NAME "lps331ap" /** diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 58083f9..7418768 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -40,6 +40,9 @@ /* FULLSCALE */ #define ST_PRESS_FS_AVL_1260MB 1260 +#define ST_PRESS_1_OUT_XL_ADDR 0x28 +#define ST_TEMP_1_OUT_L_ADDR 0x2b + /* CUSTOM VALUES FOR LPS331AP SENSOR */ #define ST_PRESS_LPS331AP_WAI_EXP 0xbb #define ST_PRESS_LPS331AP_ODR_ADDR 0x20 @@ -62,8 +65,6 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 -#define ST_PRESS_LPS331AP_OUT_XL_ADDR 0x28 -#define ST_TEMP_LPS331AP_OUT_L_ADDR 0x2b /* CUSTOM VALUES FOR LPS001WP SENSOR */ #define ST_PRESS_LPS001WP_WAI_EXP 0xba @@ -80,11 +81,36 @@ #define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28 #define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a -static const struct iio_chan_spec st_press_lps331ap_channels[] = { +/* CUSTOM VALUES FOR LPS25H SENSOR */ +#define ST_PRESS_LPS25H_WAI_EXP 0xbd +#define ST_PRESS_LPS25H_ODR_ADDR 0x20 +#define ST_PRESS_LPS25H_ODR_MASK 0x70 +#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL 0x01 +#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL 0x02 +#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL 0x03 +#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04 +#define ST_PRESS_LPS25H_PW_ADDR 0x20 +#define ST_PRESS_LPS25H_PW_MASK 0x80 +#define ST_PRESS_LPS25H_FS_ADDR 0x00 +#define ST_PRESS_LPS25H_FS_MASK 0x00 +#define ST_PRESS_LPS25H_FS_AVL_1260_VAL 0x00 +#define ST_PRESS_LPS25H_FS_AVL_1260_GAIN ST_PRESS_KPASCAL_NANO_SCALE +#define ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN ST_PRESS_CELSIUS_NANO_SCALE +#define ST_PRESS_LPS25H_BDU_ADDR 0x20 +#define ST_PRESS_LPS25H_BDU_MASK 0x04 +#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 +#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01 +#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 +#define ST_PRESS_LPS25H_MULTIREAD_BIT true +#define ST_PRESS_LPS25H_TEMP_OFFSET 42500 +#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 +#define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b + +static const struct iio_chan_spec st_press_1_channels[] = { { .type = IIO_PRESSURE, .channel2 = IIO_NO_MOD, - .address = ST_PRESS_LPS331AP_OUT_XL_ADDR, + .address = ST_PRESS_1_OUT_XL_ADDR, .scan_index = ST_SENSORS_SCAN_X, .scan_type = { .sign = 'u', @@ -99,7 +125,7 @@ static const struct iio_chan_spec st_press_lps331ap_channels[] = { { .type = IIO_TEMP, .channel2 = IIO_NO_MOD, - .address = ST_TEMP_LPS331AP_OUT_L_ADDR, + .address = ST_TEMP_1_OUT_L_ADDR, .scan_index = -1, .scan_type = { .sign = 'u', @@ -156,8 +182,8 @@ static const struct st_sensors st_press_sensors[] = { .sensors_supported = { [0] = LPS331AP_PRESS_DEV_NAME, }, - .ch = (struct iio_chan_spec *)st_press_lps331ap_channels, - .num_ch = ARRAY_SIZE(st_press_lps331ap_channels), + .ch = (struct iio_chan_spec *)st_press_1_channels, + .num_ch = ARRAY_SIZE(st_press_1_channels), .odr = { .addr = ST_PRESS_LPS331AP_ODR_ADDR, .mask = ST_PRESS_LPS331AP_ODR_MASK, @@ -233,6 +259,53 @@ static const struct st_sensors st_press_sensors[] = { .multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT, .bootime = 2, }, + { + .wai = ST_PRESS_LPS25H_WAI_EXP, + .sensors_supported = { + [0] = LPS25H_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_1_channels, + .num_ch = ARRAY_SIZE(st_press_1_channels), + .odr = { + .addr = ST_PRESS_LPS25H_ODR_ADDR, + .mask = ST_PRESS_LPS25H_ODR_MASK, + .odr_avl = { + { 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, }, + { 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, }, + { 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, }, + { 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_PRESS_LPS25H_PW_ADDR, + .mask = ST_PRESS_LPS25H_PW_MASK, + .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .addr = ST_PRESS_LPS25H_FS_ADDR, + .mask = ST_PRESS_LPS25H_FS_MASK, + .fs_avl = { + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .value = ST_PRESS_LPS25H_FS_AVL_1260_VAL, + .gain = ST_PRESS_LPS25H_FS_AVL_1260_GAIN, + .gain2 = ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN, + }, + }, + }, + .bdu = { + .addr = ST_PRESS_LPS25H_BDU_ADDR, + .mask = ST_PRESS_LPS25H_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR, + .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK, + .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, + }, + .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, + .bootime = 2, + }, }; static int st_press_read_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 51eab7f..3cd73e3 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -50,6 +50,7 @@ static int st_press_i2c_remove(struct i2c_client *client) static const struct i2c_device_id st_press_id_table[] = { { LPS001WP_PRESS_DEV_NAME }, + { LPS25H_PRESS_DEV_NAME }, { LPS331AP_PRESS_DEV_NAME }, {}, }; diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c index 27322af..f45d430 100644 --- a/drivers/iio/pressure/st_pressure_spi.c +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -49,6 +49,7 @@ static int st_press_spi_remove(struct spi_device *spi) static const struct spi_device_id st_press_id_table[] = { { LPS001WP_PRESS_DEV_NAME }, + { LPS25H_PRESS_DEV_NAME }, { LPS331AP_PRESS_DEV_NAME }, {}, }; |
