diff options
Diffstat (limited to 'drivers/ieee1394/ohci1394.c')
-rw-r--r-- | drivers/ieee1394/ohci1394.c | 3590 |
1 files changed, 0 insertions, 3590 deletions
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c deleted file mode 100644 index 5081502..0000000 --- a/drivers/ieee1394/ohci1394.c +++ /dev/null @@ -1,3590 +0,0 @@ -/* - * ohci1394.c - driver for OHCI 1394 boards - * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au> - * Gord Peters <GordPeters@smarttech.com> - * 2001 Ben Collins <bcollins@debian.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Things known to be working: - * . Async Request Transmit - * . Async Response Receive - * . Async Request Receive - * . Async Response Transmit - * . Iso Receive - * . DMA mmap for iso receive - * . Config ROM generation - * - * Things implemented, but still in test phase: - * . Iso Transmit - * . Async Stream Packets Transmit (Receive done via Iso interface) - * - * Things not implemented: - * . DMA error recovery - * - * Known bugs: - * . devctl BUS_RESET arg confusion (reset type or root holdoff?) - * added LONG_RESET_ROOT and SHORT_RESET_ROOT for root holdoff --kk - */ - -/* - * Acknowledgments: - * - * Adam J Richter <adam@yggdrasil.com> - * . Use of pci_class to find device - * - * Emilie Chung <emilie.chung@axis.com> - * . Tip on Async Request Filter - * - * Pascal Drolet <pascal.drolet@informission.ca> - * . Various tips for optimization and functionnalities - * - * Robert Ficklin <rficklin@westengineering.com> - * . Loop in irq_handler - * - * James Goodwin <jamesg@Filanet.com> - * . Various tips on initialization, self-id reception, etc. - * - * Albrecht Dress <ad@mpifr-bonn.mpg.de> - * . Apple PowerBook detection - * - * Daniel Kobras <daniel.kobras@student.uni-tuebingen.de> - * . Reset the board properly before leaving + misc cleanups - * - * Leon van Stuivenberg <leonvs@iae.nl> - * . Bug fixes - * - * Ben Collins <bcollins@debian.org> - * . Working big-endian support - * . Updated to 2.4.x module scheme (PCI aswell) - * . Config ROM generation - * - * Manfred Weihs <weihs@ict.tuwien.ac.at> - * . Reworked code for initiating bus resets - * (long, short, with or without hold-off) - * - * Nandu Santhi <contactnandu@users.sourceforge.net> - * . Added support for nVidia nForce2 onboard Firewire chipset - * - */ - -#include <linux/bitops.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/wait.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/pci.h> -#include <linux/fs.h> -#include <linux/poll.h> -#include <asm/byteorder.h> -#include <asm/atomic.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/spinlock.h> - -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/irq.h> -#include <linux/types.h> -#include <linux/vmalloc.h> -#include <linux/init.h> - -#ifdef CONFIG_PPC_PMAC -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#endif - -#include "csr1212.h" -#include "ieee1394.h" -#include "ieee1394_types.h" -#include "hosts.h" -#include "dma.h" -#include "iso.h" -#include "ieee1394_core.h" -#include "highlevel.h" -#include "ohci1394.h" - -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG -#define OHCI1394_DEBUG -#endif - -#ifdef DBGMSG -#undef DBGMSG -#endif - -#ifdef OHCI1394_DEBUG -#define DBGMSG(fmt, args...) \ -printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) -#else -#define DBGMSG(fmt, args...) do {} while (0) -#endif - -/* print general (card independent) information */ -#define PRINT_G(level, fmt, args...) \ -printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args) - -/* print card specific information */ -#define PRINT(level, fmt, args...) \ -printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) - -/* Module Parameters */ -static int phys_dma = 1; -module_param(phys_dma, int, 0444); -MODULE_PARM_DESC(phys_dma, "Enable physical DMA (default = 1)."); - -static void dma_trm_tasklet(unsigned long data); -static void dma_trm_reset(struct dma_trm_ctx *d); - -static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, - enum context_type type, int ctx, int num_desc, - int buf_size, int split_buf_size, int context_base); -static void free_dma_rcv_ctx(struct dma_rcv_ctx *d); - -static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, - enum context_type type, int ctx, int num_desc, - int context_base); - -static void ohci1394_pci_remove(struct pci_dev *pdev); - -#ifndef __LITTLE_ENDIAN -static const size_t hdr_sizes[] = { - 3, /* TCODE_WRITEQ */ - 4, /* TCODE_WRITEB */ - 3, /* TCODE_WRITE_RESPONSE */ - 0, /* reserved */ - 3, /* TCODE_READQ */ - 4, /* TCODE_READB */ - 3, /* TCODE_READQ_RESPONSE */ - 4, /* TCODE_READB_RESPONSE */ - 1, /* TCODE_CYCLE_START */ - 4, /* TCODE_LOCK_REQUEST */ - 2, /* TCODE_ISO_DATA */ - 4, /* TCODE_LOCK_RESPONSE */ - /* rest is reserved or link-internal */ -}; - -static inline void header_le32_to_cpu(quadlet_t *data, unsigned char tcode) -{ - size_t size; - - if (unlikely(tcode >= ARRAY_SIZE(hdr_sizes))) - return; - - size = hdr_sizes[tcode]; - while (size--) - data[size] = le32_to_cpu(data[size]); -} -#else -#define header_le32_to_cpu(w,x) do {} while (0) -#endif /* !LITTLE_ENDIAN */ - -/*********************************** - * IEEE-1394 functionality section * - ***********************************/ - -static u8 get_phy_reg(struct ti_ohci *ohci, u8 addr) -{ - int i; - unsigned long flags; - quadlet_t r; - - spin_lock_irqsave (&ohci->phy_reg_lock, flags); - - reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000) - break; - - mdelay(1); - } - - r = reg_read(ohci, OHCI1394_PhyControl); - - if (i >= OHCI_LOOP_COUNT) - PRINT (KERN_ERR, "Get PHY Reg timeout [0x%08x/0x%08x/%d]", - r, r & 0x80000000, i); - - spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); - - return (r & 0x00ff0000) >> 16; -} - -static void set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data) -{ - int i; - unsigned long flags; - u32 r = 0; - - spin_lock_irqsave (&ohci->phy_reg_lock, flags); - - reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - r = reg_read(ohci, OHCI1394_PhyControl); - if (!(r & 0x00004000)) - break; - - mdelay(1); - } - - if (i == OHCI_LOOP_COUNT) - PRINT (KERN_ERR, "Set PHY Reg timeout [0x%08x/0x%08x/%d]", - r, r & 0x00004000, i); - - spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); - - return; -} - -/* Or's our value into the current value */ -static void set_phy_reg_mask(struct ti_ohci *ohci, u8 addr, u8 data) -{ - u8 old; - - old = get_phy_reg (ohci, addr); - old |= data; - set_phy_reg (ohci, addr, old); - - return; -} - -static void handle_selfid(struct ti_ohci *ohci, struct hpsb_host *host, - int phyid, int isroot) -{ - quadlet_t *q = ohci->selfid_buf_cpu; - quadlet_t self_id_count=reg_read(ohci, OHCI1394_SelfIDCount); - size_t size; - quadlet_t q0, q1; - - /* Check status of self-id reception */ - - if (ohci->selfid_swap) - q0 = le32_to_cpu(q[0]); - else - q0 = q[0]; - - if ((self_id_count & 0x80000000) || - ((self_id_count & 0x00FF0000) != (q0 & 0x00FF0000))) { - PRINT(KERN_ERR, - "Error in reception of SelfID packets [0x%08x/0x%08x] (count: %d)", - self_id_count, q0, ohci->self_id_errors); - - /* Tip by James Goodwin <jamesg@Filanet.com>: - * We had an error, generate another bus reset in response. */ - if (ohci->self_id_errors<OHCI1394_MAX_SELF_ID_ERRORS) { - set_phy_reg_mask (ohci, 1, 0x40); - ohci->self_id_errors++; - } else { - PRINT(KERN_ERR, - "Too many errors on SelfID error reception, giving up!"); - } - return; - } - - /* SelfID Ok, reset error counter. */ - ohci->self_id_errors = 0; - - size = ((self_id_count & 0x00001FFC) >> 2) - 1; - q++; - - while (size > 0) { - if (ohci->selfid_swap) { - q0 = le32_to_cpu(q[0]); - q1 = le32_to_cpu(q[1]); - } else { - q0 = q[0]; - q1 = q[1]; - } - - if (q0 == ~q1) { - DBGMSG ("SelfID packet 0x%x received", q0); - hpsb_selfid_received(host, cpu_to_be32(q0)); - if (((q0 & 0x3f000000) >> 24) == phyid) - DBGMSG ("SelfID for this node is 0x%08x", q0); - } else { - PRINT(KERN_ERR, - "SelfID is inconsistent [0x%08x/0x%08x]", q0, q1); - } - q += 2; - size -= 2; - } - - DBGMSG("SelfID complete"); - - return; -} - -static void ohci_soft_reset(struct ti_ohci *ohci) { - int i; - - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if (!(reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_softReset)) - break; - mdelay(1); - } - DBGMSG ("Soft reset finished"); -} - - -/* Generate the dma receive prgs and start the context */ -static void initialize_dma_rcv_ctx(struct dma_rcv_ctx *d, int generate_irq) -{ - struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); - int i; - - ohci1394_stop_context(ohci, d->ctrlClear, NULL); - - for (i=0; i<d->num_desc; i++) { - u32 c; - - c = DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | DMA_CTL_BRANCH; - if (generate_irq) - c |= DMA_CTL_IRQ; - - d->prg_cpu[i]->control = cpu_to_le32(c | d->buf_size); - - /* End of descriptor list? */ - if (i + 1 < d->num_desc) { - d->prg_cpu[i]->branchAddress = - cpu_to_le32((d->prg_bus[i+1] & 0xfffffff0) | 0x1); - } else { - d->prg_cpu[i]->branchAddress = - cpu_to_le32((d->prg_bus[0] & 0xfffffff0)); - } - - d->prg_cpu[i]->address = cpu_to_le32(d->buf_bus[i]); - d->prg_cpu[i]->status = cpu_to_le32(d->buf_size); - } - - d->buf_ind = 0; - d->buf_offset = 0; - - if (d->type == DMA_CTX_ISO) { - /* Clear contextControl */ - reg_write(ohci, d->ctrlClear, 0xffffffff); - - /* Set bufferFill, isochHeader, multichannel for IR context */ - reg_write(ohci, d->ctrlSet, 0xd0000000); - - /* Set the context match register to match on all tags */ - reg_write(ohci, d->ctxtMatch, 0xf0000000); - - /* Clear the multi channel mask high and low registers */ - reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, 0xffffffff); - reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, 0xffffffff); - - /* Set up isoRecvIntMask to generate interrupts */ - reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << d->ctx); - } - - /* Tell the controller where the first AR program is */ - reg_write(ohci, d->cmdPtr, d->prg_bus[0] | 0x1); - - /* Run context */ - reg_write(ohci, d->ctrlSet, 0x00008000); - - DBGMSG("Receive DMA ctx=%d initialized", d->ctx); -} - -/* Initialize the dma transmit context */ -static void initialize_dma_trm_ctx(struct dma_trm_ctx *d) -{ - struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); - - /* Stop the context */ - ohci1394_stop_context(ohci, d->ctrlClear, NULL); - - d->prg_ind = 0; - d->sent_ind = 0; - d->free_prgs = d->num_desc; - d->branchAddrPtr = NULL; - INIT_LIST_HEAD(&d->fifo_list); - INIT_LIST_HEAD(&d->pending_list); - - if (d->type == DMA_CTX_ISO) { - /* enable interrupts */ - reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << d->ctx); - } - - DBGMSG("Transmit DMA ctx=%d initialized", d->ctx); -} - -/* Count the number of available iso contexts */ -static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg) -{ - u32 tmp; - - reg_write(ohci, reg, 0xffffffff); - tmp = reg_read(ohci, reg); - - DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp); - - /* Count the number of contexts */ - return hweight32(tmp); -} - -/* Global initialization */ -static void ohci_initialize(struct ti_ohci *ohci) -{ - quadlet_t buf; - int num_ports, i; - - spin_lock_init(&ohci->phy_reg_lock); - - /* Put some defaults to these undefined bus options */ - buf = reg_read(ohci, OHCI1394_BusOptions); - buf |= 0x60000000; /* Enable CMC and ISC */ - if (hpsb_disable_irm) - buf &= ~0x80000000; - else - buf |= 0x80000000; /* Enable IRMC */ - buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */ - buf &= ~0x18000000; /* Disable PMC and BMC */ - reg_write(ohci, OHCI1394_BusOptions, buf); - - /* Set the bus number */ - reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0); - - /* Enable posted writes */ - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_postedWriteEnable); - - /* Clear link control register */ - reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); - - /* Enable cycle timer and cycle master and set the IRM - * contender bit in our self ID packets if appropriate. */ - reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_CycleTimerEnable | - OHCI1394_LinkControl_CycleMaster); - i = get_phy_reg(ohci, 4) | PHY_04_LCTRL; - if (hpsb_disable_irm) - i &= ~PHY_04_CONTENDER; - else - i |= PHY_04_CONTENDER; - set_phy_reg(ohci, 4, i); - - /* Set up self-id dma buffer */ - reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus); - - /* enable self-id */ - reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID); - - /* Set the Config ROM mapping register */ - reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus); - - /* Now get our max packet size */ - ohci->max_packet_size = - 1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1); - - /* Clear the interrupt mask */ - reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); - - /* Clear the interrupt mask */ - reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); - - /* Initialize AR dma */ - initialize_dma_rcv_ctx(&ohci->ar_req_context, 0); - initialize_dma_rcv_ctx(&ohci->ar_resp_context, 0); - - /* Initialize AT dma */ - initialize_dma_trm_ctx(&ohci->at_req_context); - initialize_dma_trm_ctx(&ohci->at_resp_context); - - /* Accept AR requests from all nodes */ - reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); - - /* Set the address range of the physical response unit. - * Most controllers do not implement it as a writable register though. - * They will keep a hardwired offset of 0x00010000 and show 0x0 as - * register content. - * To actually enable physical responses is the job of our interrupt - * handler which programs the physical request filter. */ - reg_write(ohci, OHCI1394_PhyUpperBound, - OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16); - - DBGMSG("physUpperBoundOffset=%08x", - reg_read(ohci, OHCI1394_PhyUpperBound)); - - /* Specify AT retries */ - reg_write(ohci, OHCI1394_ATRetries, - OHCI1394_MAX_AT_REQ_RETRIES | - (OHCI1394_MAX_AT_RESP_RETRIES<<4) | - (OHCI1394_MAX_PHYS_RESP_RETRIES<<8)); - - /* We don't want hardware swapping */ - reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap); - - /* Enable interrupts */ - reg_write(ohci, OHCI1394_IntMaskSet, - OHCI1394_unrecoverableError | - OHCI1394_masterIntEnable | - OHCI1394_busReset | - OHCI1394_selfIDComplete | - OHCI1394_RSPkt | - OHCI1394_RQPkt | - OHCI1394_respTxComplete | - OHCI1394_reqTxComplete | - OHCI1394_isochRx | - OHCI1394_isochTx | - OHCI1394_postedWriteErr | - OHCI1394_cycleTooLong | - OHCI1394_cycleInconsistent); - - /* Enable link */ - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); - - buf = reg_read(ohci, OHCI1394_Version); - PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%d] " - "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]", - ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10), - ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), ohci->dev->irq, - (unsigned long long)pci_resource_start(ohci->dev, 0), - (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1, - ohci->max_packet_size, - ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx); - - /* Check all of our ports to make sure that if anything is - * connected, we enable that port. */ - num_ports = get_phy_reg(ohci, 2) & 0xf; - for (i = 0; i < num_ports; i++) { - unsigned int status; - - set_phy_reg(ohci, 7, i); - status = get_phy_reg(ohci, 8); - - if (status & 0x20) - set_phy_reg(ohci, 8, status & ~1); - } - - /* Serial EEPROM Sanity check. */ - if ((ohci->max_packet_size < 512) || - (ohci->max_packet_size > 4096)) { - /* Serial EEPROM contents are suspect, set a sane max packet - * size and print the raw contents for bug reports if verbose - * debug is enabled. */ -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG - int i; -#endif - - PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, " - "attempting to set max_packet_size to 512 bytes"); - reg_write(ohci, OHCI1394_BusOptions, - (reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002); - ohci->max_packet_size = 512; -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG - PRINT(KERN_DEBUG, " EEPROM Present: %d", - (reg_read(ohci, OHCI1394_Version) >> 24) & 0x1); - reg_write(ohci, OHCI1394_GUID_ROM, 0x80000000); - - for (i = 0; - ((i < 1000) && - (reg_read(ohci, OHCI1394_GUID_ROM) & 0x80000000)); i++) - udelay(10); - - for (i = 0; i < 0x20; i++) { - reg_write(ohci, OHCI1394_GUID_ROM, 0x02000000); - PRINT(KERN_DEBUG, " EEPROM %02x: %02x", i, - (reg_read(ohci, OHCI1394_GUID_ROM) >> 16) & 0xff); - } -#endif - } -} - -/* - * Insert a packet in the DMA fifo and generate the DMA prg - * FIXME: rewrite the program in order to accept packets crossing - * page boundaries. - * check also that a single dma descriptor doesn't cross a - * page boundary. - */ -static void insert_packet(struct ti_ohci *ohci, - struct dma_trm_ctx *d, struct hpsb_packet *packet) -{ - u32 cycleTimer; - int idx = d->prg_ind; - - DBGMSG("Inserting packet for node " NODE_BUS_FMT - ", tlabel=%d, tcode=0x%x, speed=%d", - NODE_BUS_ARGS(ohci->host, packet->node_id), packet->tlabel, - packet->tcode, packet->speed_code); - - d->prg_cpu[idx]->begin.address = 0; - d->prg_cpu[idx]->begin.branchAddress = 0; - - if (d->type == DMA_CTX_ASYNC_RESP) { - /* - * For response packets, we need to put a timeout value in - * the 16 lower bits of the status... let's try 1 sec timeout - */ - cycleTimer = reg_read(ohci, OHCI1394_IsochronousCycleTimer); - d->prg_cpu[idx]->begin.status = cpu_to_le32( - (((((cycleTimer>>25)&0x7)+1)&0x7)<<13) | - ((cycleTimer&0x01fff000)>>12)); - - DBGMSG("cycleTimer: %08x timeStamp: %08x", - cycleTimer, d->prg_cpu[idx]->begin.status); - } else - d->prg_cpu[idx]->begin.status = 0; - - if ( (packet->type == hpsb_async) || (packet->type == hpsb_raw) ) { - - if (packet->type == hpsb_raw) { - d->prg_cpu[idx]->data[0] = cpu_to_le32(OHCI1394_TCODE_PHY<<4); - d->prg_cpu[idx]->data[1] = cpu_to_le32(packet->header[0]); - d->prg_cpu[idx]->data[2] = cpu_to_le32(packet->header[1]); - } else { - d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | - (packet->header[0] & 0xFFFF); - - if (packet->tcode == TCODE_ISO_DATA) { - /* Sending an async stream packet */ - d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; - } else { - /* Sending a normal async request or response */ - d->prg_cpu[idx]->data[1] = - (packet->header[1] & 0xFFFF) | - (packet->header[0] & 0xFFFF0000); - d->prg_cpu[idx]->data[2] = packet->header[2]; - d->prg_cpu[idx]->data[3] = packet->header[3]; - } - header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode); - } - - if (packet->data_size) { /* block transmit */ - if (packet->tcode == TCODE_STREAM_DATA){ - d->prg_cpu[idx]->begin.control = - cpu_to_le32(DMA_CTL_OUTPUT_MORE | - DMA_CTL_IMMEDIATE | 0x8); - } else { - d->prg_cpu[idx]->begin.control = - cpu_to_le32(DMA_CTL_OUTPUT_MORE | - DMA_CTL_IMMEDIATE | 0x10); - } - d->prg_cpu[idx]->end.control = - cpu_to_le32(DMA_CTL_OUTPUT_LAST | - DMA_CTL_IRQ | - DMA_CTL_BRANCH | - packet->data_size); - /* - * Check that the packet data buffer - * does not cross a page boundary. - * - * XXX Fix this some day. eth1394 seems to trigger - * it, but ignoring it doesn't seem to cause a - * problem. - */ -#if 0 - if (cross_bound((unsigned long)packet->data, - packet->data_size)>0) { - /* FIXME: do something about it */ - PRINT(KERN_ERR, - "%s: packet data addr: %p size %Zd bytes " - "cross page boundary", __func__, - packet->data, packet->data_size); - } -#endif - d->prg_cpu[idx]->end.address = cpu_to_le32( - pci_map_single(ohci->dev, packet->data, - packet->data_size, - PCI_DMA_TODEVICE)); - - d->prg_cpu[idx]->end.branchAddress = 0; - d->prg_cpu[idx]->end.status = 0; - if (d->branchAddrPtr) - *(d->branchAddrPtr) = - cpu_to_le32(d->prg_bus[idx] | 0x3); - d->branchAddrPtr = - &(d->prg_cpu[idx]->end.branchAddress); - } else { /* quadlet transmit */ - if (packet->type == hpsb_raw) - d->prg_cpu[idx]->begin.control = - cpu_to_le32(DMA_CTL_OUTPUT_LAST | - DMA_CTL_IMMEDIATE | - DMA_CTL_IRQ | - DMA_CTL_BRANCH | - (packet->header_size + 4)); - else - d->prg_cpu[idx]->begin.control = - cpu_to_le32(DMA_CTL_OUTPUT_LAST | - DMA_CTL_IMMEDIATE | - DMA_CTL_IRQ | - DMA_CTL_BRANCH | - packet->header_size); - - if (d->branchAddrPtr) - *(d->branchAddrPtr) = - cpu_to_le32(d->prg_bus[idx] | 0x2); - d->branchAddrPtr = - &(d->prg_cpu[idx]->begin.branchAddress); - } - - } else { /* iso packet */ - d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | - (packet->header[0] & 0xFFFF); - d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; - header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode); - - d->prg_cpu[idx]->begin.control = - cpu_to_le32(DMA_CTL_OUTPUT_MORE | - DMA_CTL_IMMEDIATE | 0x8); - d->prg_cpu[idx]->end.control = - cpu_to_le32(DMA_CTL_OUTPUT_LAST | - DMA_CTL_UPDATE | - DMA_CTL_IRQ | - DMA_CTL_BRANCH | - packet->data_size); - d->prg_cpu[idx]->end.address = cpu_to_le32( - pci_map_single(ohci->dev, packet->data, - packet->data_size, PCI_DMA_TODEVICE)); - - d->prg_cpu[idx]->end.branchAddress = 0; - d->prg_cpu[idx]->end.status = 0; - DBGMSG("Iso xmit context info: header[%08x %08x]\n" - " begin=%08x %08x %08x %08x\n" - " %08x %08x %08x %08x\n" - " end =%08x %08x %08x %08x", - d->prg_cpu[idx]->data[0], d->prg_cpu[idx]->data[1], - d->prg_cpu[idx]->begin.control, - d->prg_cpu[idx]->begin.address, - d->prg_cpu[idx]->begin.branchAddress, - d->prg_cpu[idx]->begin.status, - d->prg_cpu[idx]->data[0], - d->prg_cpu[idx]->data[1], - d->prg_cpu[idx]->data[2], - d->prg_cpu[idx]->data[3], - d->prg_cpu[idx]->end.control, - d->prg_cpu[idx]->end.address, - d->prg_cpu[idx]->end.branchAddress, - d->prg_cpu[idx]->end.status); - if (d->branchAddrPtr) - *(d->branchAddrPtr) = cpu_to_le32(d->prg_bus[idx] | 0x3); - d->branchAddrPtr = &(d->prg_cpu[idx]->end.branchAddress); - } - d->free_prgs--; - - /* queue the packet in the appropriate context queue */ - list_add_tail(&packet->driver_list, &d->fifo_list); - d->prg_ind = (d->prg_ind + 1) % d->num_desc; -} - -/* - * This function fills the FIFO with the (eventual) pending packets - * and runs or wakes up the DMA prg if necessary. - * - * The function MUST be called with the d->lock held. - */ -static void dma_trm_flush(struct ti_ohci *ohci, struct dma_trm_ctx *d) -{ - struct hpsb_packet *packet, *ptmp; - int idx = d->prg_ind; - int z = 0; - - /* insert the packets into the dma fifo */ - list_for_each_entry_safe(packet, ptmp, &d->pending_list, driver_list) { - if (!d->free_prgs) - break; - - /* For the first packet only */ - if (!z) - z = (packet->data_size) ? 3 : 2; - - /* Insert the packet */ - list_del_init(&packet->driver_list); - insert_packet(ohci, d, packet); - } - - /* Nothing must have been done, either no free_prgs or no packets */ - if (z == 0) - return; - - /* Is the context running ? (should be unless it is - the first packet to be sent in this context) */ - if (!(reg_read(ohci, d->ctrlSet) & 0x8000)) { - u32 nodeId = reg_read(ohci, OHCI1394_NodeID); - - DBGMSG("Starting transmit DMA ctx=%d",d->ctx); - reg_write(ohci, d->cmdPtr, d->prg_bus[idx] | z); - - /* Check that the node id is valid, and not 63 */ - if (!(nodeId & 0x80000000) || (nodeId & 0x3f) == 63) - PRINT(KERN_ERR, "Running dma failed because Node ID is not valid"); - else - reg_write(ohci, d->ctrlSet, 0x8000); - } else { - /* Wake up the dma context if necessary */ - if (!(reg_read(ohci, d->ctrlSet) & 0x400)) - DBGMSG("Waking transmit DMA ctx=%d",d->ctx); - - /* do this always, to avoid race condition */ - reg_write(ohci, d->ctrlSet, 0x1000); - } - - return; -} - -/* Transmission of an async or iso packet */ -static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet) -{ - struct ti_ohci *ohci = host->hostdata; - struct dma_trm_ctx *d; - unsigned long flags; - - if (packet->data_size > ohci->max_packet_size) { - PRINT(KERN_ERR, - "Transmit packet size %Zd is too big", - packet->data_size); - return -EOVERFLOW; - } - - if (packet->type == hpsb_raw) - d = &ohci->at_req_context; - else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA)) - d = &ohci->at_resp_context; - else - d = &ohci->at_req_context; - - spin_lock_irqsave(&d->lock,flags); - - list_add_tail(&packet->driver_list, &d->pending_list); - - dma_trm_flush(ohci, d); - - spin_unlock_irqrestore(&d->lock,flags); - - return 0; -} - -static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) -{ - struct ti_ohci *ohci = host->hostdata; - int retval = 0, phy_reg; - - switch (cmd) { - case RESET_BUS: - switch (arg) { - case SHORT_RESET: - phy_reg = get_phy_reg(ohci, 5); - phy_reg |= 0x40; - set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ - break; - case LONG_RESET: - phy_reg = get_phy_reg(ohci, 1); - phy_reg |= 0x40; - set_phy_reg(ohci, 1, phy_reg); /* set IBR */ - break; - case SHORT_RESET_NO_FORCE_ROOT: - phy_reg = get_phy_reg(ohci, 1); - if (phy_reg & 0x80) { - phy_reg &= ~0x80; - set_phy_reg(ohci, 1, phy_reg); /* clear RHB */ - } - - phy_reg = get_phy_reg(ohci, 5); - phy_reg |= 0x40; - set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ - break; - case LONG_RESET_NO_FORCE_ROOT: - phy_reg = get_phy_reg(ohci, 1); - phy_reg &= ~0x80; - phy_reg |= 0x40; - set_phy_reg(ohci, 1, phy_reg); /* clear RHB, set IBR */ - break; - case SHORT_RESET_FORCE_ROOT: - phy_reg = get_phy_reg(ohci, 1); - if (!(phy_reg & 0x80)) { - phy_reg |= 0x80; - set_phy_reg(ohci, 1, phy_reg); /* set RHB */ - } - - phy_reg = get_phy_reg(ohci, 5); - phy_reg |= 0x40; - set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ - break; - case LONG_RESET_FORCE_ROOT: - phy_reg = get_phy_reg(ohci, 1); - phy_reg |= 0xc0; - set_phy_reg(ohci, 1, phy_reg); /* set RHB and IBR */ - break; - default: - retval = -1; - } - break; - - case GET_CYCLE_COUNTER: - retval = reg_read(ohci, OHCI1394_IsochronousCycleTimer); - break; - - case SET_CYCLE_COUNTER: - reg_write(ohci, OHCI1394_IsochronousCycleTimer, arg); - break; - - case SET_BUS_ID: - PRINT(KERN_ERR, "devctl command SET_BUS_ID err"); - break; - - case ACT_CYCLE_MASTER: - if (arg) { - /* check if we are root and other nodes are present */ - u32 nodeId = reg_read(ohci, OHCI1394_NodeID); - if ((nodeId & (1<<30)) && (nodeId & 0x3f)) { - /* - * enable cycleTimer, cycleMaster - */ - DBGMSG("Cycle master enabled"); - reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_CycleTimerEnable | - OHCI1394_LinkControl_CycleMaster); - } - } else { - /* disable cycleTimer, cycleMaster, cycleSource */ - reg_write(ohci, OHCI1394_LinkControlClear, - OHCI1394_LinkControl_CycleTimerEnable | - OHCI1394_LinkControl_CycleMaster | - OHCI1394_LinkControl_CycleSource); - } - break; - - case CANCEL_REQUESTS: - DBGMSG("Cancel request received"); - dma_trm_reset(&ohci->at_req_context); - dma_trm_reset(&ohci->at_resp_context); - break; - - default: - PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet", - cmd); - break; - } - return retval; -} - -/*********************************** - * rawiso ISO reception * - ***********************************/ - -/* - We use either buffer-fill or packet-per-buffer DMA mode. The DMA - buffer is split into "blocks" (regions described by one DMA - descriptor). Each block must be one page or less in size, and - must not cross a page boundary. - - There is one little wrinkle with buffer-fill mode: a packet that - starts in the final block may wrap around into the first block. But - the user API expects all packets to be contiguous. Our solution is - to keep the very last page of the DMA buffer in reserve - if a - packet spans the gap, we copy its tail into this page. -*/ - -struct ohci_iso_recv { - struct ti_ohci *ohci; - - struct ohci1394_iso_tasklet task; - int task_active; - - enum { BUFFER_FILL_MODE = 0, - PACKET_PER_BUFFER_MODE = 1 } dma_mode; - - /* memory and PCI mapping for the DMA descriptors */ - struct dma_prog_region prog; - struct dma_cmd *block; /* = (struct dma_cmd*) prog.virt */ - - /* how many DMA blocks fit in the buffer */ - unsigned int nblocks; - - /* stride of DMA blocks */ - unsigned int buf_stride; - - /* number of blocks to batch between interrupts */ - int block_irq_interval; - - /* block that DMA will finish next */ - int block_dma; - - /* (buffer-fill only) block that the reader will release next */ - int block_reader; - - /* (buffer-fill only) bytes of buffer the reader has released, - less than one block */ - int released_bytes; - - /* (buffer-fill only) buffer offset at which the next packet will appear */ - int dma_offset; - - /* OHCI DMA context control registers */ - u32 ContextControlSet; - u32 ContextControlClear; - u32 CommandPtr; - u32 ContextMatch; -}; - -static void ohci_iso_recv_task(unsigned long data); -static void ohci_iso_recv_stop(struct hpsb_iso *iso); -static void ohci_iso_recv_shutdown(struct hpsb_iso *iso); -static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync); -static void ohci_iso_recv_program(struct hpsb_iso *iso); - -static int ohci_iso_recv_init(struct hpsb_iso *iso) -{ - struct ti_ohci *ohci = iso->host->hostdata; - struct ohci_iso_recv *recv; - int ctx; - int ret = -ENOMEM; - - recv = kmalloc(sizeof(*recv), GFP_KERNEL); - if (!recv) - return -ENOMEM; - - iso->hostdata = recv; - recv->ohci = ohci; - recv->task_active = 0; - dma_prog_region_init(&recv->prog); - recv->block = NULL; - - /* use buffer-fill mode, unless irq_interval is 1 - (note: multichannel requires buffer-fill) */ - - if (((iso->irq_interval == 1 && iso->dma_mode == HPSB_ISO_DMA_OLD_ABI) || - iso->dma_mode == HPSB_ISO_DMA_PACKET_PER_BUFFER) && iso->channel != -1) { - recv->dma_mode = PACKET_PER_BUFFER_MODE; - } else { - recv->dma_mode = BUFFER_FILL_MODE; - } - - /* set nblocks, buf_stride, block_irq_interval */ - - if (recv->dma_mode == BUFFER_FILL_MODE) { - recv->buf_stride = PAGE_SIZE; - - /* one block per page of data in the DMA buffer, minus the final guard page */ - recv->nblocks = iso->buf_size/PAGE_SIZE - 1; - if (recv->nblocks < 3) { - DBGMSG("ohci_iso_recv_init: DMA buffer too small"); - goto err; - } - - /* iso->irq_interval is in packets - translate that to blocks */ - if (iso->irq_interval == 1) - recv->block_irq_interval = 1; - else - recv->block_irq_interval = iso->irq_interval * - ((recv->nblocks+1)/iso->buf_packets); - if (recv->block_irq_interval*4 > recv->nblocks) - recv->block_irq_interval = recv->nblocks/4; - if (recv->block_irq_interval < 1) - recv->block_irq_interval = 1; - - } else { - int max_packet_size; - - recv->nblocks = iso->buf_packets; - recv->block_irq_interval = iso->irq_interval; - if (recv->block_irq_interval * 4 > iso->buf_packets) - recv->block_irq_interval = iso->buf_packets / 4; - if (recv->block_irq_interval < 1) - recv->block_irq_interval = 1; - - /* choose a buffer stride */ - /* must be a power of 2, and <= PAGE_SIZE */ - - max_packet_size = iso->buf_size / iso->buf_packets; - - for (recv->buf_stride = 8; recv->buf_stride < max_packet_size; - recv->buf_stride *= 2); - - if (recv->buf_stride*iso->buf_packets > iso->buf_size || - recv->buf_stride > PAGE_SIZE) { - /* this shouldn't happen, but anyway... */ - DBGMSG("ohci_iso_recv_init: problem choosing a buffer stride"); - goto err; - } - } - - recv->block_reader = 0; - recv->released_bytes = 0; - recv->block_dma = 0; - recv->dma_offset = 0; - - /* size of DMA program = one descriptor per block */ - if (dma_prog_region_alloc(&recv->prog, - sizeof(struct dma_cmd) * recv->nblocks, - recv->ohci->dev)) - goto err; - - recv->block = (struct dma_cmd*) recv->prog.kvirt; - - ohci1394_init_iso_tasklet(&recv->task, - iso->channel == -1 ? OHCI_ISO_MULTICHANNEL_RECEIVE : - OHCI_ISO_RECEIVE, - ohci_iso_recv_task, (unsigned long) iso); - - if (ohci1394_register_iso_tasklet(recv->ohci, &recv->task) < 0) { - ret = -EBUSY; - goto err; - } - - recv->task_active = 1; - - /* recv context registers are spaced 32 bytes apart */ - ctx = recv->task.context; - recv->ContextControlSet = OHCI1394_IsoRcvContextControlSet + 32 * ctx; - recv->ContextControlClear = OHCI1394_IsoRcvContextControlClear + 32 * ctx; - recv->CommandPtr = OHCI1394_IsoRcvCommandPtr + 32 * ctx; - recv->ContextMatch = OHCI1394_IsoRcvContextMatch + 32 * ctx; - - if (iso->channel == -1) { - /* clear multi-channel selection mask */ - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, 0xFFFFFFFF); - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, 0xFFFFFFFF); - } - - /* write the DMA program */ - ohci_iso_recv_program(iso); - - DBGMSG("ohci_iso_recv_init: %s mode, DMA buffer is %lu pages" - " (%u bytes), using %u blocks, buf_stride %u, block_irq_interval %d", - recv->dma_mode == BUFFER_FILL_MODE ? - "buffer-fill" : "packet-per-buffer", - iso->buf_size/PAGE_SIZE, iso->buf_size, - recv->nblocks, recv->buf_stride, recv->block_irq_interval); - - return 0; - -err: - ohci_iso_recv_shutdown(iso); - return ret; -} - -static void ohci_iso_recv_stop(struct hpsb_iso *iso) -{ - struct ohci_iso_recv *recv = iso->hostdata; - - /* disable interrupts */ - reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << recv->task.context); - - /* halt DMA */ - ohci1394_stop_context(recv->ohci, recv->ContextControlClear, NULL); -} - -static void ohci_iso_recv_shutdown(struct hpsb_iso *iso) -{ - struct ohci_iso_recv *recv = iso->hostdata; - - if (recv->task_active) { - ohci_iso_recv_stop(iso); - ohci1394_unregister_iso_tasklet(recv->ohci, &recv->task); - recv->task_active = 0; - } - - dma_prog_region_free(&recv->prog); - kfree(recv); - iso->hostdata = NULL; -} - -/* set up a "gapped" ring buffer DMA program */ -static void ohci_iso_recv_program(struct hpsb_iso *iso) -{ - struct ohci_iso_recv *recv = iso->hostdata; - int blk; - - /* address of 'branch' field in previous DMA descriptor */ - u32 *prev_branch = NULL; - - for (blk = 0; blk < recv->nblocks; blk++) { - u32 control; - - /* the DMA descriptor */ - struct dma_cmd *cmd = &recv->block[blk]; - - /* offset of the DMA descriptor relative to the DMA prog buffer */ - unsigned long prog_offset = blk * sizeof(struct dma_cmd); - - /* offset of this packet's data within the DMA buffer */ - unsigned long buf_offset = blk * recv->buf_stride; - - if (recv->dma_mode == BUFFER_FILL_MODE) { - control = 2 << 28; /* INPUT_MORE */ - } else { - control = 3 << 28; /* INPUT_LAST */ - } - - control |= 8 << 24; /* s = 1, update xferStatus and resCount */ - - /* interrupt on last block, and at intervals */ - if (blk == recv->nblocks-1 || (blk % recv->block_irq_interval) == 0) { - control |= 3 << 20; /* want interrupt */ - } - - control |= 3 << 18; /* enable branch to address */ - control |= recv->buf_stride; - - cmd->control = cpu_to_le32(control); - cmd->address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, buf_offset)); - cmd->branchAddress = 0; /* filled in on next loop */ - cmd->status = cpu_to_le32(recv->buf_stride); - - /* link the previous descriptor to this one */ - if (prev_branch) { - *prev_branch = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, prog_offset) | 1); - } - - prev_branch = &cmd->branchAddress; - } - - /* the final descriptor's branch address and Z should be left at 0 */ -} - -/* listen or unlisten to a specific channel (multi-channel mode only) */ -static void ohci_iso_recv_change_channel(struct hpsb_iso *iso, unsigned char channel, int listen) -{ - struct ohci_iso_recv *recv = iso->hostdata; - int reg, i; - - if (channel < 32) { - reg = listen ? OHCI1394_IRMultiChanMaskLoSet : OHCI1394_IRMultiChanMaskLoClear; - i = channel; - } else { - reg = listen ? OHCI1394_IRMultiChanMaskHiSet : OHCI1394_IRMultiChanMaskHiClear; - i = channel - 32; - } - - reg_write(recv->ohci, reg, (1 << i)); - - /* issue a dummy read to force all PCI writes to be posted immediately */ - mb(); - reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); -} - -static void ohci_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask) -{ - struct ohci_iso_recv *recv = iso->hostdata; - int i; - - for (i = 0; i < 64; i++) { - if (mask & (1ULL << i)) { - if (i < 32) - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoSet, (1 << i)); - else - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiSet, (1 << (i-32))); - } else { - if (i < 32) - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, (1 << i)); - else - reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, (1 << (i-32))); - } - } - - /* issue a dummy read to force all PCI writes to be posted immediately */ - mb(); - reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); -} - -static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync) -{ - struct ohci_iso_recv *recv = iso->hostdata; - struct ti_ohci *ohci = recv->ohci; - u32 command, contextMatch; - - reg_write(recv->ohci, recv->ContextControlClear, 0xFFFFFFFF); - wmb(); - - /* always keep ISO headers */ - command = (1 << 30); - - if (recv->dma_mode == BUFFER_FILL_MODE) - command |= (1 << 31); - - reg_write(recv->ohci, recv->ContextControlSet, command); - - /* match on specified tags */ - contextMatch = tag_mask << 28; - - if (iso->channel == -1) { - /* enable multichannel reception */ - reg_write(recv->ohci, recv->ContextControlSet, (1 << 28)); - } else { - /* listen on channel */ - contextMatch |= iso->channel; - } - - if (cycle != -1) { - u32 seconds; - - /* enable cycleMatch */ - reg_write(recv->ohci, recv->ContextControlSet, (1 << 29)); - - /* set starting cycle */ - cycle &= 0x1FFF; - - /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - - just snarf them from the current time */ - seconds = reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer) >> 25; - - /* advance one second to give some extra time for DMA to start */ - seconds += 1; - - cycle |= (seconds & 3) << 13; - - contextMatch |= cycle << 12; - } - - if (sync != -1) { - /* set sync flag on first DMA descriptor */ - struct dma_cmd *cmd = &recv->block[recv->block_dma]; - cmd->control |= cpu_to_le32(DMA_CTL_WAIT); - - /* match sync field */ - contextMatch |= (sync&0xf)<<8; - } - - reg_write(recv->ohci, recv->ContextMatch, contextMatch); - - /* address of first descriptor block */ - command = dma_prog_region_offset_to_bus(&recv->prog, - recv->block_dma * sizeof(struct dma_cmd)); - command |= 1; /* Z=1 */ - - reg_write(recv->ohci, recv->CommandPtr, command); - - /* enable interrupts */ - reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskSet, 1 << recv->task.context); - - wmb(); - - /* run */ - reg_write(recv->ohci, recv->ContextControlSet, 0x8000); - - /* issue a dummy read of the cycle timer register to force - all PCI writes to be posted immediately */ - mb(); - reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); - - /* check RUN */ - if (!(reg_read(recv->ohci, recv->ContextControlSet) & 0x8000)) { - PRINT(KERN_ERR, - "Error starting IR DMA (ContextControl 0x%08x)\n", - reg_read(recv->ohci, recv->ContextControlSet)); - return -1; - } - - return 0; -} - -static void ohci_iso_recv_release_block(struct ohci_iso_recv *recv, int block) -{ - /* re-use the DMA descriptor for the block */ - /* by linking the previous descriptor to it */ - - int next_i = block; - int prev_i = (next_i == 0) ? (recv->nblocks - 1) : (next_i - 1); - - struct dma_cmd *next = &recv->block[next_i]; - struct dma_cmd *prev = &recv->block[prev_i]; - - /* ignore out-of-range requests */ - if ((block < 0) || (block > recv->nblocks)) - return; - - /* 'next' becomes the new end of the DMA chain, - so disable branch and enable interrupt */ - next->branchAddress = 0; - next->control |= cpu_to_le32(3 << 20); - next->status = cpu_to_le32(recv->buf_stride); - - /* link prev to next */ - prev->branchAddress = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, - sizeof(struct dma_cmd) * next_i) - | 1); /* Z=1 */ - - /* disable interrupt on previous DMA descriptor, except at intervals */ - if ((prev_i % recv->block_irq_interval) == 0) { - prev->control |= cpu_to_le32(3 << 20); /* enable interrupt */ - } else { - prev->control &= cpu_to_le32(~(3<<20)); /* disable interrupt */ - } - wmb(); - - /* wake up DMA in case it fell asleep */ - reg_write(recv->ohci, recv->ContextControlSet, (1 << 12)); -} - -static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv, - struct hpsb_iso_packet_info *info) -{ - /* release the memory where the packet was */ - recv->released_bytes += info->total_len; - - /* have we released enough memory for one block? */ - while (recv->released_bytes > recv->buf_stride) { - ohci_iso_recv_release_block(recv, recv->block_reader); - recv->block_reader = (recv->block_reader + 1) % recv->nblocks; - recv->released_bytes -= recv->buf_stride; - } -} - -static inline void ohci_iso_recv_release(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) -{ - struct ohci_iso_recv *recv = iso->hostdata; - if (recv->dma_mode == BUFFER_FILL_MODE) { - ohci_iso_recv_bufferfill_release(recv, info); - } else { - ohci_iso_recv_release_block(recv, info - iso->infos); - } -} - -/* parse all packets from blocks that have been fully received */ -static void ohci_iso_recv_bufferfill_parse(struct hpsb_iso *iso, struct ohci_iso_recv *recv) -{ - int wake = 0; - int runaway = 0; - struct ti_ohci *ohci = recv->ohci; - - while (1) { - /* we expect the next parsable packet to begin at recv->dma_offset */ - /* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */ - - unsigned int offset; - unsigned short len, cycle, total_len; - unsigned char channel, tag, sy; - - unsigned char *p = iso->data_buf.kvirt; - - unsigned int this_block = recv->dma_offset/recv->buf_stride; - - /* don't loop indefinitely */ - if (runaway++ > 100000) { - atomic_inc(&iso->overflows); - PRINT(KERN_ERR, - "IR DMA error - Runaway during buffer parsing!\n"); - break; - } - - /* stop parsing once we arrive at block_dma (i.e. don't get ahead of DMA) */ - if (this_block == recv->block_dma) - break; - - wake = 1; - - /* parse data length, tag, channel, and sy */ - - /* note: we keep our own local copies of 'len' and 'offset' - so the user can't mess with them by poking in the mmap area */ - - len = p[recv->dma_offset+2] | (p[recv->dma_offset+3] << 8); - - if (len > 4096) { - PRINT(KERN_ERR, - "IR DMA error - bogus 'len' value %u\n", len); - } - - channel = p[recv->dma_offset+1] & 0x3F; - tag = p[recv->dma_offset+1] >> 6; - sy = p[recv->dma_offset+0] & 0xF; - - /* advance to data payload */ - recv->dma_offset += 4; - - /* check for wrap-around */ - if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { - recv->dma_offset -= recv->buf_stride*recv->nblocks; - } - - /* dma_offset now points to the first byte of the data payload */ - offset = recv->dma_offset; - - /* advance to xferStatus/timeStamp */ - recv->dma_offset += len; - - total_len = len + 8; /* 8 bytes header+trailer in OHCI packet */ - /* payload is padded to 4 bytes */ - if (len % 4) { - recv->dma_offset += 4 - (len%4); - total_len += 4 - (len%4); - } - - /* check for wrap-around */ - if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { - /* uh oh, the packet data wraps from the last - to the first DMA block - make the packet - contiguous by copying its "tail" into the - guard page */ - - int guard_off = recv->buf_stride*recv->nblocks; - int tail_len = len - (guard_off - offset); - - if (tail_len > 0 && tail_len < recv->buf_stride) { - memcpy(iso->data_buf.kvirt + guard_off, - iso->data_buf.kvirt, - tail_len); - } - - recv->dma_offset -= recv->buf_stride*recv->nblocks; - } - - /* parse timestamp */ - cycle = p[recv->dma_offset+0] | (p[recv->dma_offset+1]<<8); - cycle &= 0x1FFF; - - /* advance to next packet */ - recv->dma_offset += 4; - - /* check for wrap-around */ - if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { - recv->dma_offset -= recv->buf_stride*recv->nblocks; - } - - hpsb_iso_packet_received(iso, offset, len, total_len, cycle, channel, tag, sy); - } - - if (wake) - hpsb_iso_wake(iso); -} - -static void ohci_iso_recv_bufferfill_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) -{ - int loop; - struct ti_ohci *ohci = recv->ohci; - - /* loop over all blocks */ - for (loop = 0; loop < recv->nblocks; loop++) { - - /* check block_dma to see if it's done */ - struct dma_cmd *im = &recv->block[recv->block_dma]; - - /* check the DMA descriptor for new writes to xferStatus */ - u16 xferstatus = le32_to_cpu(im->status) >> 16; - - /* rescount is the number of bytes *remaining to be written* in the block */ - u16 rescount = le32_to_cpu(im->status) & 0xFFFF; - - unsigned char event = xferstatus & 0x1F; - - if (!event) { - /* nothing has happened to this block yet */ - break; - } - - if (event != 0x11) { - atomic_inc(&iso->overflows); - PRINT(KERN_ERR, - "IR DMA error - OHCI error code 0x%02x\n", event); - } - - if (rescount != 0) { - /* the card is still writing to this block; - we can't touch it until it's done */ - break; - } - - /* OK, the block is finished... */ - - /* sync our view of the block */ - dma_region_sync_for_cpu(&iso->data_buf, recv->block_dma*recv->buf_stride, recv->buf_stride); - - /* reset the DMA descriptor */ - im->status = recv->buf_stride; - - /* advance block_dma */ - recv->block_dma = (recv->block_dma + 1) % recv->nblocks; - - if ((recv->block_dma+1) % recv->nblocks == recv->block_reader) { - atomic_inc(&iso->overflows); - DBGMSG("ISO reception overflow - " - "ran out of DMA blocks"); - } - } - - /* parse any packets that have arrived */ - ohci_iso_recv_bufferfill_parse(iso, recv); -} - -static void ohci_iso_recv_packetperbuf_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) -{ - int count; - int wake = 0; - struct ti_ohci *ohci = recv->ohci; - - /* loop over the entire buffer */ - for (count = 0; count < recv->nblocks; count++) { - u32 packet_len = 0; - - /* pointer to the DMA descriptor */ - struct dma_cmd *il = ((struct dma_cmd*) recv->prog.kvirt) + iso->pkt_dma; - - /* check the DMA descriptor for new writes to xferStatus */ - u16 xferstatus = le32_to_cpu(il->status) >> 16; - u16 rescount = le32_to_cpu(il->status) & 0xFFFF; - - unsigned char event = xferstatus & 0x1F; - - if (!event) { - /* this packet hasn't come in yet; we are done for now */ - goto out; - } - - if (event == 0x11) { - /* packet received successfully! */ - - /* rescount is the number of bytes *remaining* in the packet buffer, - after the packet was written */ - packet_len = recv->buf_stride - rescount; - - } else if (event == 0x02) { - PRINT(KERN_ERR, "IR DMA error - packet too long for buffer\n"); - } else if (event) { - PRINT(KERN_ERR, "IR DMA error - OHCI error code 0x%02x\n", event); - } - - /* sync our view of the buffer */ - dma_region_sync_for_cpu(&iso->data_buf, iso->pkt_dma * recv->buf_stride, recv->buf_stride); - - /* record the per-packet info */ - { - /* iso header is 8 bytes ahead of the data payload */ - unsigned char *hdr; - - unsigned int offset; - unsigned short cycle; - unsigned char channel, tag, sy; - - offset = iso->pkt_dma * recv->buf_stride; - hdr = iso->data_buf.kvirt + offset; - - /* skip iso header */ - offset += 8; - packet_len -= 8; - - cycle = (hdr[0] | (hdr[1] << 8)) & 0x1FFF; - channel = hdr[5] & 0x3F; - tag = hdr[5] >> 6; - sy = hdr[4] & 0xF; - - hpsb_iso_packet_received(iso, offset, packet_len, - recv->buf_stride, cycle, channel, tag, sy); - } - - /* reset the DMA descriptor */ - il->status = recv->buf_stride; - - wake = 1; - recv->block_dma = iso->pkt_dma; - } - -out: - if (wake) - hpsb_iso_wake(iso); -} - -static void ohci_iso_recv_task(unsigned long data) -{ - struct hpsb_iso *iso = (struct hpsb_iso*) data; - struct ohci_iso_recv *recv = iso->hostdata; - - if (recv->dma_mode == BUFFER_FILL_MODE) - ohci_iso_recv_bufferfill_task(iso, recv); - else - ohci_iso_recv_packetperbuf_task(iso, recv); -} - -/*********************************** - * rawiso ISO transmission * - ***********************************/ - -struct ohci_iso_xmit { - struct ti_ohci *ohci; - struct dma_prog_region prog; - struct ohci1394_iso_tasklet task; - int task_active; - int last_cycle; - atomic_t skips; - - u32 ContextControlSet; - u32 ContextControlClear; - u32 CommandPtr; -}; - -/* transmission DMA program: - one OUTPUT_MORE_IMMEDIATE for the IT header - one OUTPUT_LAST for the buffer data */ - -struct iso_xmit_cmd { - struct dma_cmd output_more_immediate; - u8 iso_hdr[8]; - u32 unused[2]; - struct dma_cmd output_last; -}; - -static int ohci_iso_xmit_init(struct hpsb_iso *iso); -static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle); -static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso); -static void ohci_iso_xmit_task(unsigned long data); - -static int ohci_iso_xmit_init(struct hpsb_iso *iso) -{ - struct ohci_iso_xmit *xmit; - unsigned int prog_size; - int ctx; - int ret = -ENOMEM; - - xmit = kmalloc(sizeof(*xmit), GFP_KERNEL); - if (!xmit) - return -ENOMEM; - - iso->hostdata = xmit; - xmit->ohci = iso->host->hostdata; - xmit->task_active = 0; - xmit->last_cycle = -1; - atomic_set(&iso->skips, 0); - - dma_prog_region_init(&xmit->prog); - - prog_size = sizeof(struct iso_xmit_cmd) * iso->buf_packets; - - if (dma_prog_region_alloc(&xmit->prog, prog_size, xmit->ohci->dev)) - goto err; - - ohci1394_init_iso_tasklet(&xmit->task, OHCI_ISO_TRANSMIT, - ohci_iso_xmit_task, (unsigned long) iso); - - if (ohci1394_register_iso_tasklet(xmit->ohci, &xmit->task) < 0) { - ret = -EBUSY; - goto err; - } - - xmit->task_active = 1; - - /* xmit context registers are spaced 16 bytes apart */ - ctx = xmit->task.context; - xmit->ContextControlSet = OHCI1394_IsoXmitContextControlSet + 16 * ctx; - xmit->ContextControlClear = OHCI1394_IsoXmitContextControlClear + 16 * ctx; - xmit->CommandPtr = OHCI1394_IsoXmitCommandPtr + 16 * ctx; - - return 0; - -err: - ohci_iso_xmit_shutdown(iso); - return ret; -} - -static void ohci_iso_xmit_stop(struct hpsb_iso *iso) -{ - struct ohci_iso_xmit *xmit = iso->hostdata; - struct ti_ohci *ohci = xmit->ohci; - - /* disable interrupts */ - reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskClear, 1 << xmit->task.context); - - /* halt DMA */ - if (ohci1394_stop_context(xmit->ohci, xmit->ContextControlClear, NULL)) { - /* XXX the DMA context will lock up if you try to send too much data! */ - PRINT(KERN_ERR, - "you probably exceeded the OHCI card's bandwidth limit - " - "reload the module and reduce xmit bandwidth"); - } -} - -static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso) -{ - struct ohci_iso_xmit *xmit = iso->hostdata; - - if (xmit->task_active) { - ohci_iso_xmit_stop(iso); - ohci1394_unregister_iso_tasklet(xmit->ohci, &xmit->task); - xmit->task_active = 0; - } - - dma_prog_region_free(&xmit->prog); - kfree(xmit); - iso->hostdata = NULL; -} - -static void ohci_iso_xmit_task(unsigned long data) -{ - struct hpsb_iso *iso = (struct hpsb_iso*) data; - struct ohci_iso_xmit *xmit = iso->hostdata; - struct ti_ohci *ohci = xmit->ohci; - int wake = 0; - int count; - - /* check the whole buffer if necessary, starting at pkt_dma */ - for (count = 0; count < iso->buf_packets; count++) { - int cycle; - - /* DMA descriptor */ - struct iso_xmit_cmd *cmd = dma_region_i(&xmit->prog, struct iso_xmit_cmd, iso->pkt_dma); - - /* check for new writes to xferStatus */ - u16 xferstatus = le32_to_cpu(cmd->output_last.status) >> 16; - u8 event = xferstatus & 0x1F; - - if (!event) { - /* packet hasn't been sent yet; we are done for now */ - break; - } - - if (event != 0x11) - PRINT(KERN_ERR, - "IT DMA error - OHCI error code 0x%02x\n", event); - - /* at least one packet went out, so wake up the writer */ - wake = 1; - - /* parse cycle */ - cycle = le32_to_cpu(cmd->output_last.status) & 0x1FFF; - - if (xmit->last_cycle > -1) { - int cycle_diff = cycle - xmit->last_cycle; - int skip; - - /* unwrap */ - if (cycle_diff < 0) { - cycle_diff += 8000; - if (cycle_diff < 0) - PRINT(KERN_ERR, "bogus cycle diff %d\n", - cycle_diff); - } - - skip = cycle_diff - 1; - if (skip > 0) { - DBGMSG("skipped %d cycles without packet loss", skip); - atomic_add(skip, &iso->skips); - } - } - xmit->last_cycle = cycle; - - /* tell the subsystem the packet has gone out */ - hpsb_iso_packet_sent(iso, cycle, event != 0x11); - - /* reset the DMA descriptor for next time */ - cmd->output_last.status = 0; - } - - if (wake) - hpsb_iso_wake(iso); -} - -static int ohci_iso_xmit_queue(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) -{ - struct ohci_iso_xmit *xmit = iso->hostdata; - struct ti_ohci *ohci = xmit->ohci; - - int next_i, prev_i; - struct iso_xmit_cmd *next, *prev; - - unsigned int offset; - unsigned short len; - unsigned char tag, sy; - - /* check that the packet doesn't cross a page boundary - (we could allow this if we added OUTPUT_MORE descriptor support) */ - if (cross_bound(info->offset, info->len)) { - PRINT(KERN_ERR, - "rawiso xmit: packet %u crosses a page boundary", - iso->first_packet); - return -EINVAL; - } - - offset = info->offset; - len = info->len; - tag = info->tag; - sy = info->sy; - - /* sync up the card's view of the buffer */ - dma_region_sync_for_device(&iso->data_buf, offset, len); - - /* append first_packet to the DMA chain */ - /* by linking the previous descriptor to it */ - /* (next will become the new end of the DMA chain) */ - - next_i = iso->first_packet; - prev_i = (next_i == 0) ? (iso->buf_packets - 1) : (next_i - 1); - - next = dma_region_i(&xmit->prog, struct iso_xmit_cmd, next_i); - prev = dma_region_i(&xmit->prog, struct iso_xmit_cmd, prev_i); - - /* set up the OUTPUT_MORE_IMMEDIATE descriptor */ - memset(next, 0, sizeof(struct iso_xmit_cmd)); - next->output_more_immediate.control = cpu_to_le32(0x02000008); - - /* ISO packet header is embedded in the OUTPUT_MORE_IMMEDIATE */ - - /* tcode = 0xA, and sy */ - next->iso_hdr[0] = 0xA0 | (sy & 0xF); - - /* tag and channel number */ - next->iso_hdr[1] = (tag << 6) | (iso->channel & 0x3F); - - /* transmission speed */ - next->iso_hdr[2] = iso->speed & 0x7; - - /* payload size */ - next->iso_hdr[6] = len & 0xFF; - next->iso_hdr[7] = len >> 8; - - /* set up the OUTPUT_LAST */ - next->output_last.control = cpu_to_le32(1 << 28); - next->output_last.control |= cpu_to_le32(1 << 27); /* update timeStamp */ - next->output_last.control |= cpu_to_le32(3 << 20); /* want interrupt */ - next->output_last.control |= cpu_to_le32(3 << 18); /* enable branch */ - next->output_last.control |= cpu_to_le32(len); - - /* payload bus address */ - next->output_last.address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, offset)); - - /* leave branchAddress at zero for now */ - - /* re-write the previous DMA descriptor to chain to this one */ - - /* set prev branch address to point to next (Z=3) */ - prev->output_last.branchAddress = cpu_to_le32( - dma_prog_region_offset_to_bus(&xmit->prog, sizeof(struct iso_xmit_cmd) * next_i) | 3); - - /* - * Link the skip address to this descriptor itself. This causes a - * context to skip a cycle whenever lost cycles or FIFO overruns occur, - * without dropping the data at that point the application should then - * decide whether this is an error condition or not. Some protocols - * can deal with this by dropping some rate-matching padding packets. - */ - next->output_more_immediate.branchAddress = - prev->output_last.branchAddress; - - /* disable interrupt, unless required by the IRQ interval */ - if (prev_i % iso->irq_interval) { - prev->output_last.control &= cpu_to_le32(~(3 << 20)); /* no interrupt */ - } else { - prev->output_last.control |= cpu_to_le32(3 << 20); /* enable interrupt */ - } - - wmb(); - - /* wake DMA in case it is sleeping */ - reg_write(xmit->ohci, xmit->ContextControlSet, 1 << 12); - - /* issue a dummy read of the cycle timer to force all PCI - writes to be posted immediately */ - mb(); - reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer); - - return 0; -} - -static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle) -{ - struct ohci_iso_xmit *xmit = iso->hostdata; - struct ti_ohci *ohci = xmit->ohci; - - /* clear out the control register */ - reg_write(xmit->ohci, xmit->ContextControlClear, 0xFFFFFFFF); - wmb(); - - /* address and length of first descriptor block (Z=3) */ - reg_write(xmit->ohci, xmit->CommandPtr, - dma_prog_region_offset_to_bus(&xmit->prog, iso->pkt_dma * sizeof(struct iso_xmit_cmd)) | 3); - - /* cycle match */ - if (cycle != -1) { - u32 start = cycle & 0x1FFF; - - /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - - just snarf them from the current time */ - u32 seconds = reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer) >> 25; - - /* advance one second to give some extra time for DMA to start */ - seconds += 1; - - start |= (seconds & 3) << 13; - - reg_write(xmit->ohci, xmit->ContextControlSet, 0x80000000 | (start << 16)); - } - - /* enable interrupts */ - reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskSet, 1 << xmit->task.context); - - /* run */ - reg_write(xmit->ohci, xmit->ContextControlSet, 0x8000); - mb(); - - /* wait 100 usec to give the card time to go active */ - udelay(100); - - /* check the RUN bit */ - if (!(reg_read(xmit->ohci, xmit->ContextControlSet) & 0x8000)) { - PRINT(KERN_ERR, "Error starting IT DMA (ContextControl 0x%08x)\n", - reg_read(xmit->ohci, xmit->ContextControlSet)); - return -1; - } - - return 0; -} - -static int ohci_isoctl(struct hpsb_iso *iso, enum isoctl_cmd cmd, unsigned long arg) -{ - - switch(cmd) { - case XMIT_INIT: - return ohci_iso_xmit_init(iso); - case XMIT_START: - return ohci_iso_xmit_start(iso, arg); - case XMIT_STOP: - ohci_iso_xmit_stop(iso); - return 0; - case XMIT_QUEUE: - return ohci_iso_xmit_queue(iso, (struct hpsb_iso_packet_info*) arg); - case XMIT_SHUTDOWN: - ohci_iso_xmit_shutdown(iso); - return 0; - - case RECV_INIT: - return ohci_iso_recv_init(iso); - case RECV_START: { - int *args = (int*) arg; - return ohci_iso_recv_start(iso, args[0], args[1], args[2]); - } - case RECV_STOP: - ohci_iso_recv_stop(iso); - return 0; - case RECV_RELEASE: - ohci_iso_recv_release(iso, (struct hpsb_iso_packet_info*) arg); - return 0; - case RECV_FLUSH: - ohci_iso_recv_task((unsigned long) iso); - return 0; - case RECV_SHUTDOWN: - ohci_iso_recv_shutdown(iso); - return 0; - case RECV_LISTEN_CHANNEL: - ohci_iso_recv_change_channel(iso, arg, 1); - return 0; - case RECV_UNLISTEN_CHANNEL: - ohci_iso_recv_change_channel(iso, arg, 0); - return 0; - case RECV_SET_CHANNEL_MASK: - ohci_iso_recv_set_channel_mask(iso, *((u64*) arg)); - return 0; - - default: - PRINT_G(KERN_ERR, "ohci_isoctl cmd %d not implemented yet", - cmd); - break; - } - return -EINVAL; -} - -/*************************************** - * IEEE-1394 functionality section END * - ***************************************/ - - -/******************************************************** - * Global stuff (interrupt handler, init/shutdown code) * - ********************************************************/ - -static void dma_trm_reset(struct dma_trm_ctx *d) -{ - unsigned long flags; - LIST_HEAD(packet_list); - struct ti_ohci *ohci = d->ohci; - struct hpsb_packet *packet, *ptmp; - - ohci1394_stop_context(ohci, d->ctrlClear, NULL); - - /* Lock the context, reset it and release it. Move the packets - * that were pending in the context to packet_list and free - * them after releasing the lock. */ - - spin_lock_irqsave(&d->lock, flags); - - list_splice_init(&d->fifo_list, &packet_list); - list_splice_init(&d->pending_list, &packet_list); - - d->branchAddrPtr = NULL; - d->sent_ind = d->prg_ind; - d->free_prgs = d->num_desc; - - spin_unlock_irqrestore(&d->lock, flags); - - if (list_empty(&packet_list)) - return; - - PRINT(KERN_INFO, "AT dma reset ctx=%d, aborting transmission", d->ctx); - - /* Now process subsystem callbacks for the packets from this - * context. */ - list_for_each_entry_safe(packet, ptmp, &packet_list, driver_list) { - list_del_init(&packet->driver_list); - hpsb_packet_sent(ohci->host, packet, ACKX_ABORTED); - } -} - -static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci, - quadlet_t rx_event, - quadlet_t tx_event) -{ - struct ohci1394_iso_tasklet *t; - unsigned long mask; - unsigned long flags; - - spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); - - list_for_each_entry(t, &ohci->iso_tasklet_list, link) { - mask = 1 << t->context; - - if (t->type == OHCI_ISO_TRANSMIT) { - if (tx_event & mask) - tasklet_schedule(&t->tasklet); - } else { - /* OHCI_ISO_RECEIVE or OHCI_ISO_MULTICHANNEL_RECEIVE */ - if (rx_event & mask) - tasklet_schedule(&t->tasklet); - } - } - - spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); -} - -static irqreturn_t ohci_irq_handler(int irq, void *dev_id) -{ - quadlet_t event, node_id; - struct ti_ohci *ohci = (struct ti_ohci *)dev_id; - struct hpsb_host *host = ohci->host; - int phyid = -1, isroot = 0; - unsigned long flags; - - /* Read and clear the interrupt event register. Don't clear - * the busReset event, though. This is done when we get the - * selfIDComplete interrupt. */ - spin_lock_irqsave(&ohci->event_lock, flags); - event = reg_read(ohci, OHCI1394_IntEventClear); - reg_write(ohci, OHCI1394_IntEventClear, event & ~OHCI1394_busReset); - spin_unlock_irqrestore(&ohci->event_lock, flags); - - if (!event) - return IRQ_NONE; - - /* If event is ~(u32)0 cardbus card was ejected. In this case - * we just return, and clean up in the ohci1394_pci_remove - * function. */ - if (event == ~(u32) 0) { - DBGMSG("Device removed."); - return IRQ_NONE; - } - - DBGMSG("IntEvent: %08x", event); - - if (event & OHCI1394_unrecoverableError) { - int ctx; - PRINT(KERN_ERR, "Unrecoverable error!"); - - if (reg_read(ohci, OHCI1394_AsReqTrContextControlSet) & 0x800) - PRINT(KERN_ERR, "Async Req Tx Context died: " - "ctrl[%08x] cmdptr[%08x]", - reg_read(ohci, OHCI1394_AsReqTrContextControlSet), - reg_read(ohci, OHCI1394_AsReqTrCommandPtr)); - - if (reg_read(ohci, OHCI1394_AsRspTrContextControlSet) & 0x800) - PRINT(KERN_ERR, "Async Rsp Tx Context died: " - "ctrl[%08x] cmdptr[%08x]", - reg_read(ohci, OHCI1394_AsRspTrContextControlSet), - reg_read(ohci, OHCI1394_AsRspTrCommandPtr)); - - if (reg_read(ohci, OHCI1394_AsReqRcvContextControlSet) & 0x800) - PRINT(KERN_ERR, "Async Req Rcv Context died: " - "ctrl[%08x] cmdptr[%08x]", - reg_read(ohci, OHCI1394_AsReqRcvContextControlSet), - reg_read(ohci, OHCI1394_AsReqRcvCommandPtr)); - - if (reg_read(ohci, OHCI1394_AsRspRcvContextControlSet) & 0x800) - PRINT(KERN_ERR, "Async Rsp Rcv Context died: " - "ctrl[%08x] cmdptr[%08x]", - reg_read(ohci, OHCI1394_AsRspRcvContextControlSet), - reg_read(ohci, OHCI1394_AsRspRcvCommandPtr)); - - for (ctx = 0; ctx < ohci->nb_iso_xmit_ctx; ctx++) { - if (reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)) & 0x800) - PRINT(KERN_ERR, "Iso Xmit %d Context died: " - "ctrl[%08x] cmdptr[%08x]", ctx, - reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)), - reg_read(ohci, OHCI1394_IsoXmitCommandPtr + (16 * ctx))); - } - - for (ctx = 0; ctx < ohci->nb_iso_rcv_ctx; ctx++) { - if (reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)) & 0x800) - PRINT(KERN_ERR, "Iso Recv %d Context died: " - "ctrl[%08x] cmdptr[%08x] match[%08x]", ctx, - reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)), - reg_read(ohci, OHCI1394_IsoRcvCommandPtr + (32 * ctx)), - reg_read(ohci, OHCI1394_IsoRcvContextMatch + (32 * ctx))); - } - - event &= ~OHCI1394_unrecoverableError; - } - if (event & OHCI1394_postedWriteErr) { - PRINT(KERN_ERR, "physical posted write error"); - /* no recovery strategy yet, had to involve protocol drivers */ - event &= ~OHCI1394_postedWriteErr; - } - if (event & OHCI1394_cycleTooLong) { - if(printk_ratelimit()) - PRINT(KERN_WARNING, "isochronous cycle too long"); - else - DBGMSG("OHCI1394_cycleTooLong"); - reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_CycleMaster); - event &= ~OHCI1394_cycleTooLong; - } - if (event & OHCI1394_cycleInconsistent) { - /* We subscribe to the cycleInconsistent event only to - * clear the corresponding event bit... otherwise, - * isochronous cycleMatch DMA won't work. */ - DBGMSG("OHCI1394_cycleInconsistent"); - event &= ~OHCI1394_cycleInconsistent; - } - if (event & OHCI1394_busReset) { - /* The busReset event bit can't be cleared during the - * selfID phase, so we disable busReset interrupts, to - * avoid burying the cpu in interrupt requests. */ - spin_lock_irqsave(&ohci->event_lock, flags); - reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset); - - if (ohci->check_busreset) { - int loop_count = 0; - - udelay(10); - - while (reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) { - reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); - - spin_unlock_irqrestore(&ohci->event_lock, flags); - udelay(10); - spin_lock_irqsave(&ohci->event_lock, flags); - - /* The loop counter check is to prevent the driver - * from remaining in this state forever. For the - * initial bus reset, the loop continues for ever - * and the system hangs, until some device is plugged-in - * or out manually into a port! The forced reset seems - * to solve this problem. This mainly effects nForce2. */ - if (loop_count > 10000) { - ohci_devctl(host, RESET_BUS, LONG_RESET); - DBGMSG("Detected bus-reset loop. Forced a bus reset!"); - loop_count = 0; - } - - loop_count++; - } - } - spin_unlock_irqrestore(&ohci->event_lock, flags); - if (!host->in_bus_reset) { - DBGMSG("irq_handler: Bus reset requested"); - - /* Subsystem call */ - hpsb_bus_reset(ohci->host); - } - event &= ~OHCI1394_busReset; - } - if (event & OHCI1394_reqTxComplete) { - struct dma_trm_ctx *d = &ohci->at_req_context; - DBGMSG("Got reqTxComplete interrupt " - "status=0x%08X", reg_read(ohci, d->ctrlSet)); - if (reg_read(ohci, d->ctrlSet) & 0x800) - ohci1394_stop_context(ohci, d->ctrlClear, - "reqTxComplete"); - else - dma_trm_tasklet((unsigned long)d); - //tasklet_schedule(&d->task); - event &= ~OHCI1394_reqTxComplete; - } - if (event & OHCI1394_respTxComplete) { - struct dma_trm_ctx *d = &ohci->at_resp_context; - DBGMSG("Got respTxComplete interrupt " - "status=0x%08X", reg_read(ohci, d->ctrlSet)); - if (reg_read(ohci, d->ctrlSet) & 0x800) - ohci1394_stop_context(ohci, d->ctrlClear, - "respTxComplete"); - else - tasklet_schedule(&d->task); - event &= ~OHCI1394_respTxComplete; - } - if (event & OHCI1394_RQPkt) { - struct dma_rcv_ctx *d = &ohci->ar_req_context; - DBGMSG("Got RQPkt interrupt status=0x%08X", - reg_read(ohci, d->ctrlSet)); - if (reg_read(ohci, d->ctrlSet) & 0x800) - ohci1394_stop_context(ohci, d->ctrlClear, "RQPkt"); - else - tasklet_schedule(&d->task); - event &= ~OHCI1394_RQPkt; - } - if (event & OHCI1394_RSPkt) { - struct dma_rcv_ctx *d = &ohci->ar_resp_context; - DBGMSG("Got RSPkt interrupt status=0x%08X", - reg_read(ohci, d->ctrlSet)); - if (reg_read(ohci, d->ctrlSet) & 0x800) - ohci1394_stop_context(ohci, d->ctrlClear, "RSPkt"); - else - tasklet_schedule(&d->task); - event &= ~OHCI1394_RSPkt; - } - if (event & OHCI1394_isochRx) { - quadlet_t rx_event; - - rx_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet); - reg_write(ohci, OHCI1394_IsoRecvIntEventClear, rx_event); - ohci_schedule_iso_tasklets(ohci, rx_event, 0); - event &= ~OHCI1394_isochRx; - } - if (event & OHCI1394_isochTx) { - quadlet_t tx_event; - - tx_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet); - reg_write(ohci, OHCI1394_IsoXmitIntEventClear, tx_event); - ohci_schedule_iso_tasklets(ohci, 0, tx_event); - event &= ~OHCI1394_isochTx; - } - if (event & OHCI1394_selfIDComplete) { - if (host->in_bus_reset) { - node_id = reg_read(ohci, OHCI1394_NodeID); - - if (!(node_id & 0x80000000)) { - PRINT(KERN_ERR, - "SelfID received, but NodeID invalid " - "(probably new bus reset occurred): %08X", - node_id); - goto selfid_not_valid; - } - - phyid = node_id & 0x0000003f; - isroot = (node_id & 0x40000000) != 0; - - DBGMSG("SelfID interrupt received " - "(phyid %d, %s)", phyid, - (isroot ? "root" : "not root")); - - handle_selfid(ohci, host, phyid, isroot); - - /* Clear the bus reset event and re-enable the - * busReset interrupt. */ - spin_lock_irqsave(&ohci->event_lock, flags); - reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); - reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset); - spin_unlock_irqrestore(&ohci->event_lock, flags); - - /* Turn on phys dma reception. - * - * TODO: Enable some sort of filtering management. - */ - if (phys_dma) { - reg_write(ohci, OHCI1394_PhyReqFilterHiSet, - 0xffffffff); - reg_write(ohci, OHCI1394_PhyReqFilterLoSet, - 0xffffffff); - } - - DBGMSG("PhyReqFilter=%08x%08x", - reg_read(ohci, OHCI1394_PhyReqFilterHiSet), - reg_read(ohci, OHCI1394_PhyReqFilterLoSet)); - - hpsb_selfid_complete(host, phyid, isroot); - } else - PRINT(KERN_ERR, - "SelfID received outside of bus reset sequence"); - -selfid_not_valid: - event &= ~OHCI1394_selfIDComplete; - } - - /* Make sure we handle everything, just in case we accidentally - * enabled an interrupt that we didn't write a handler for. */ - if (event) - PRINT(KERN_ERR, "Unhandled interrupt(s) 0x%08x", - event); - - return IRQ_HANDLED; -} - -/* Put the buffer back into the dma context */ -static void insert_dma_buffer(struct dma_rcv_ctx *d, int idx) -{ - struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); - DBGMSG("Inserting dma buf ctx=%d idx=%d", d->ctx, idx); - - d->prg_cpu[idx]->status = cpu_to_le32(d->buf_size); - d->prg_cpu[idx]->branchAddress &= le32_to_cpu(0xfffffff0); - idx = (idx + d->num_desc - 1 ) % d->num_desc; - d->prg_cpu[idx]->branchAddress |= le32_to_cpu(0x00000001); - - /* To avoid a race, ensure 1394 interface hardware sees the inserted - * context program descriptors before it sees the wakeup bit set. */ - wmb(); - - /* wake up the dma context if necessary */ - if (!(reg_read(ohci, d->ctrlSet) & 0x400)) { - PRINT(KERN_INFO, - "Waking dma ctx=%d ... processing is probably too slow", - d->ctx); - } - - /* do this always, to avoid race condition */ - reg_write(ohci, d->ctrlSet, 0x1000); -} - -#define cond_le32_to_cpu(data, noswap) \ - (noswap ? data : le32_to_cpu(data)) - -static const int TCODE_SIZE[16] = {20, 0, 16, -1, 16, 20, 20, 0, - -1, 0, -1, 0, -1, -1, 16, -1}; - -/* - * Determine the length of a packet in the buffer - * Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca> - */ -static inline int packet_length(struct dma_rcv_ctx *d, int idx, - quadlet_t *buf_ptr, int offset, - unsigned char tcode, int noswap) -{ - int length = -1; - - if (d->type == DMA_CTX_ASYNC_REQ || d->type == DMA_CTX_ASYNC_RESP) { - length = TCODE_SIZE[tcode]; - if (length == 0) { - if (offset + 12 >= d->buf_size) { - length = (cond_le32_to_cpu(d->buf_cpu[(idx + 1) % d->num_desc] - [3 - ((d->buf_size - offset) >> 2)], noswap) >> 16); - } else { - length = (cond_le32_to_cpu(buf_ptr[3], noswap) >> 16); - } - length += 20; - } - } else if (d->type == DMA_CTX_ISO) { - /* Assumption: buffer fill mode with header/trailer */ - length = (cond_le32_to_cpu(buf_ptr[0], noswap) >> 16) + 8; - } - - if (length > 0 && length % 4) - length += 4 - (length % 4); - - return length; -} - -/* Tasklet that processes dma receive buffers */ -static void dma_rcv_tasklet (unsigned long data) -{ - struct dma_rcv_ctx *d = (struct dma_rcv_ctx*)data; - struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); - unsigned int split_left, idx, offset, rescount; - unsigned char tcode; - int length, bytes_left, ack; - unsigned long flags; - quadlet_t *buf_ptr; - char *split_ptr; - char msg[256]; - - spin_lock_irqsave(&d->lock, flags); - - idx = d->buf_ind; - offset = d->buf_offset; - buf_ptr = d->buf_cpu[idx] + offset/4; - - rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; - bytes_left = d->buf_size - rescount - offset; - - while (bytes_left > 0) { - tcode = (cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming) >> 4) & 0xf; - - /* packet_length() will return < 4 for an error */ - length = packet_length(d, idx, buf_ptr, offset, tcode, ohci->no_swap_incoming); - - if (length < 4) { /* something is wrong */ - sprintf(msg,"Unexpected tcode 0x%x(0x%08x) in AR ctx=%d, length=%d", - tcode, cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming), - d->ctx, length); - ohci1394_stop_context(ohci, d->ctrlClear, msg); - spin_unlock_irqrestore(&d->lock, flags); - return; - } - - /* The first case is where we have a packet that crosses - * over more than one descriptor. The next case is where - * it's all in the first descriptor. */ - if ((offset + length) > d->buf_size) { - DBGMSG("Split packet rcv'd"); - if (length > d->split_buf_size) { - ohci1394_stop_context(ohci, d->ctrlClear, - "Split packet size exceeded"); - d->buf_ind = idx; - d->buf_offset = offset; - spin_unlock_irqrestore(&d->lock, flags); - return; - } - - if (le32_to_cpu(d->prg_cpu[(idx+1)%d->num_desc]->status) - == d->buf_size) { - /* Other part of packet not written yet. - * this should never happen I think - * anyway we'll get it on the next call. */ - PRINT(KERN_INFO, - "Got only half a packet!"); - d->buf_ind = idx; - d->buf_offset = offset; - spin_unlock_irqrestore(&d->lock, flags); - return; - } - - split_left = length; - split_ptr = (char *)d->spb; - memcpy(split_ptr,buf_ptr,d->buf_size-offset); - split_left -= d->buf_size-offset; - split_ptr += d->buf_size-offset; - insert_dma_buffer(d, idx); - idx = (idx+1) % d->num_desc; - buf_ptr = d->buf_cpu[idx]; - offset=0; - - while (split_left >= d->buf_size) { - memcpy(split_ptr,buf_ptr,d->buf_size); - split_ptr += d->buf_size; - split_left -= d->buf_size; - insert_dma_buffer(d, idx); - idx = (idx+1) % d->num_desc; - buf_ptr = d->buf_cpu[idx]; - } - - if (split_left > 0) { - memcpy(split_ptr, buf_ptr, split_left); - offset = split_left; - buf_ptr += offset/4; - } - } else { - DBGMSG("Single packet rcv'd"); - memcpy(d->spb, buf_ptr, length); - offset += length; - buf_ptr += length/4; - if (offset==d->buf_size) { - insert_dma_buffer(d, idx); - idx = (idx+1) % d->num_desc; - buf_ptr = d->buf_cpu[idx]; - offset=0; - } - } - - /* We get one phy packet to the async descriptor for each - * bus reset. We always ignore it. */ - if (tcode != OHCI1394_TCODE_PHY) { - if (!ohci->no_swap_incoming) - header_le32_to_cpu(d->spb, tcode); - DBGMSG("Packet received from node" - " %d ack=0x%02X spd=%d tcode=0x%X" - " length=%d ctx=%d tlabel=%d", - (d->spb[1]>>16)&0x3f, - (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f, - (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3, - tcode, length, d->ctx, - (d->spb[0]>>10)&0x3f); - - ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f) - == 0x11) ? 1 : 0; - - hpsb_packet_received(ohci->host, d->spb, - length-4, ack); - } -#ifdef OHCI1394_DEBUG - else - PRINT (KERN_DEBUG, "Got phy packet ctx=%d ... discarded", - d->ctx); -#endif - - rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; - - bytes_left = d->buf_size - rescount - offset; - - } - - d->buf_ind = idx; - d->buf_offset = offset; - - spin_unlock_irqrestore(&d->lock, flags); -} - -/* Bottom half that processes sent packets */ -static void dma_trm_tasklet (unsigned long data) -{ - struct dma_trm_ctx *d = (struct dma_trm_ctx*)data; - struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); - struct hpsb_packet *packet, *ptmp; - unsigned long flags; - u32 status, ack; - size_t datasize; - - spin_lock_irqsave(&d->lock, flags); - - list_for_each_entry_safe(packet, ptmp, &d->fifo_list, driver_list) { - datasize = packet->data_size; - if (datasize && packet->type != hpsb_raw) - status = le32_to_cpu( - d->prg_cpu[d->sent_ind]->end.status) >> 16; - else - status = le32_to_cpu( - d->prg_cpu[d->sent_ind]->begin.status) >> 16; - - if (status == 0) - /* this packet hasn't been sent yet*/ - break; - -#ifdef OHCI1394_DEBUG - if (datasize) - if (((le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf) == 0xa) - DBGMSG("Stream packet sent to channel %d tcode=0x%X " - "ack=0x%X spd=%d dataLength=%d ctx=%d", - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>8)&0x3f, - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, - status&0x1f, (status>>5)&0x3, - le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16, - d->ctx); - else - DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" - "%d ack=0x%X spd=%d dataLength=%d ctx=%d", - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16)&0x3f, - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>10)&0x3f, - status&0x1f, (status>>5)&0x3, - le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3])>>16, - d->ctx); - else - DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" - "%d ack=0x%X spd=%d data=0x%08X ctx=%d", - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1]) - >>16)&0x3f, - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) - >>4)&0xf, - (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) - >>10)&0x3f, - status&0x1f, (status>>5)&0x3, - le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3]), - d->ctx); -#endif - - if (status & 0x10) { - ack = status & 0xf; - } else { - switch (status & 0x1f) { - case EVT_NO_STATUS: /* that should never happen */ - case EVT_RESERVED_A: /* that should never happen */ - case EVT_LONG_PACKET: /* that should never happen */ - PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); - ack = ACKX_SEND_ERROR; - break; - case EVT_MISSING_ACK: - ack = ACKX_TIMEOUT; - break; - case EVT_UNDERRUN: - ack = ACKX_SEND_ERROR; - break; - case EVT_OVERRUN: /* that should never happen */ - PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); - ack = ACKX_SEND_ERROR; - break; - case EVT_DESCRIPTOR_READ: - case EVT_DATA_READ: - case EVT_DATA_WRITE: - ack = ACKX_SEND_ERROR; - break; - case EVT_BUS_RESET: /* that should never happen */ - PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); - ack = ACKX_SEND_ERROR; - break; - case EVT_TIMEOUT: - ack = ACKX_TIMEOUT; - break; - case EVT_TCODE_ERR: - ack = ACKX_SEND_ERROR; - break; - case EVT_RESERVED_B: /* that should never happen */ - case EVT_RESERVED_C: /* that should never happen */ - PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); - ack = ACKX_SEND_ERROR; - break; - case EVT_UNKNOWN: - case EVT_FLUSHED: - ack = ACKX_SEND_ERROR; - break; - default: - PRINT(KERN_ERR, "Unhandled OHCI evt_* error 0x%x", status & 0x1f); - ack = ACKX_SEND_ERROR; - BUG(); - } - } - - list_del_init(&packet->driver_list); - hpsb_packet_sent(ohci->host, packet, ack); - - if (datasize) - pci_unmap_single(ohci->dev, - cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address), - datasize, PCI_DMA_TODEVICE); - - d->sent_ind = (d->sent_ind+1)%d->num_desc; - d->free_prgs++; - } - - dma_trm_flush(ohci, d); - - spin_unlock_irqrestore(&d->lock, flags); -} - -static void free_dma_rcv_ctx(struct dma_rcv_ctx *d) -{ - int i; - struct ti_ohci *ohci = d->ohci; - - if (ohci == NULL) - return; - - DBGMSG("Freeing dma_rcv_ctx %d", d->ctx); - - if (d->buf_cpu) { - for (i=0; i<d->num_desc; i++) - if (d->buf_cpu[i] && d->buf_bus[i]) - pci_free_consistent( - ohci->dev, d->buf_size, - d->buf_cpu[i], d->buf_bus[i]); - kfree(d->buf_cpu); - kfree(d->buf_bus); - } - if (d->prg_cpu) { - for (i=0; i<d->num_desc; i++) - if (d->prg_cpu[i] && d->prg_bus[i]) - pci_pool_free(d->prg_pool, d->prg_cpu[i], - d->prg_bus[i]); - pci_pool_destroy(d->prg_pool); - kfree(d->prg_cpu); - kfree(d->prg_bus); - } - kfree(d->spb); - - /* Mark this context as freed. */ - d->ohci = NULL; -} - -static int -alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, - enum context_type type, int ctx, int num_desc, - int buf_size, int split_buf_size, int context_base) -{ - int i, len; - static int num_allocs; - static char pool_name[20]; - - d->ohci = ohci; - d->type = type; - d->ctx = ctx; - - d->num_desc = num_desc; - d->buf_size = buf_size; - d->split_buf_size = split_buf_size; - - d->ctrlSet = 0; - d->ctrlClear = 0; - d->cmdPtr = 0; - - d->buf_cpu = kzalloc(d->num_desc * sizeof(*d->buf_cpu), GFP_ATOMIC); - d->buf_bus = kzalloc(d->num_desc * sizeof(*d->buf_bus), GFP_ATOMIC); - - if (d->buf_cpu == NULL || d->buf_bus == NULL) { - PRINT(KERN_ERR, "Failed to allocate %s", "DMA buffer"); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - - d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_ATOMIC); - d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_ATOMIC); - - if (d->prg_cpu == NULL || d->prg_bus == NULL) { - PRINT(KERN_ERR, "Failed to allocate %s", "DMA prg"); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - - d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC); - - if (d->spb == NULL) { - PRINT(KERN_ERR, "Failed to allocate %s", "split buffer"); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - - len = sprintf(pool_name, "ohci1394_rcv_prg"); - sprintf(pool_name+len, "%d", num_allocs); - d->prg_pool = pci_pool_create(pool_name, ohci->dev, - sizeof(struct dma_cmd), 4, 0); - if(d->prg_pool == NULL) - { - PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - num_allocs++; - - for (i=0; i<d->num_desc; i++) { - d->buf_cpu[i] = pci_alloc_consistent(ohci->dev, - d->buf_size, - d->buf_bus+i); - - if (d->buf_cpu[i] != NULL) { - memset(d->buf_cpu[i], 0, d->buf_size); - } else { - PRINT(KERN_ERR, - "Failed to allocate %s", "DMA buffer"); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - - d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i); - - if (d->prg_cpu[i] != NULL) { - memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd)); - } else { - PRINT(KERN_ERR, - "Failed to allocate %s", "DMA prg"); - free_dma_rcv_ctx(d); - return -ENOMEM; - } - } - - spin_lock_init(&d->lock); - - d->ctrlSet = context_base + OHCI1394_ContextControlSet; - d->ctrlClear = context_base + OHCI1394_ContextControlClear; - d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; - - tasklet_init(&d->task, dma_rcv_tasklet, (unsigned long) d); - return 0; -} - -static void free_dma_trm_ctx(struct dma_trm_ctx *d) -{ - int i; - struct ti_ohci *ohci = d->ohci; - - if (ohci == NULL) - return; - - DBGMSG("Freeing dma_trm_ctx %d", d->ctx); - - if (d->prg_cpu) { - for (i=0; i<d->num_desc; i++) - if (d->prg_cpu[i] && d->prg_bus[i]) - pci_pool_free(d->prg_pool, d->prg_cpu[i], - d->prg_bus[i]); - pci_pool_destroy(d->prg_pool); - kfree(d->prg_cpu); - kfree(d->prg_bus); - } - - /* Mark this context as freed. */ - d->ohci = NULL; -} - -static int -alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, - enum context_type type, int ctx, int num_desc, - int context_base) -{ - int i, len; - static char pool_name[20]; - static int num_allocs=0; - - d->ohci = ohci; - d->type = type; - d->ctx = ctx; - d->num_desc = num_desc; - d->ctrlSet = 0; - d->ctrlClear = 0; - d->cmdPtr = 0; - - d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_KERNEL); - d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_KERNEL); - - if (d->prg_cpu == NULL || d->prg_bus == NULL) { - PRINT(KERN_ERR, "Failed to allocate %s", "AT DMA prg"); - free_dma_trm_ctx(d); - return -ENOMEM; - } - - len = sprintf(pool_name, "ohci1394_trm_prg"); - sprintf(pool_name+len, "%d", num_allocs); - d->prg_pool = pci_pool_create(pool_name, ohci->dev, - sizeof(struct at_dma_prg), 4, 0); - if (d->prg_pool == NULL) { - PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); - free_dma_trm_ctx(d); - return -ENOMEM; - } - num_allocs++; - - for (i = 0; i < d->num_desc; i++) { - d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i); - - if (d->prg_cpu[i] != NULL) { - memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg)); - } else { - PRINT(KERN_ERR, - "Failed to allocate %s", "AT DMA prg"); - free_dma_trm_ctx(d); - return -ENOMEM; - } - } - - spin_lock_init(&d->lock); - - /* initialize tasklet */ - d->ctrlSet = context_base + OHCI1394_ContextControlSet; - d->ctrlClear = context_base + OHCI1394_ContextControlClear; - d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; - tasklet_init(&d->task, dma_trm_tasklet, (unsigned long)d); - return 0; -} - -static void ohci_set_hw_config_rom(struct hpsb_host *host, __be32 *config_rom) -{ - struct ti_ohci *ohci = host->hostdata; - - reg_write(ohci, OHCI1394_ConfigROMhdr, be32_to_cpu(config_rom[0])); - reg_write(ohci, OHCI1394_BusOptions, be32_to_cpu(config_rom[2])); - - memcpy(ohci->csr_config_rom_cpu, config_rom, OHCI_CONFIG_ROM_LEN); -} - - -static quadlet_t ohci_hw_csr_reg(struct hpsb_host *host, int reg, - quadlet_t data, quadlet_t compare) -{ - struct ti_ohci *ohci = host->hostdata; - int i; - - reg_write(ohci, OHCI1394_CSRData, data); - reg_write(ohci, OHCI1394_CSRCompareData, compare); - reg_write(ohci, OHCI1394_CSRControl, reg & 0x3); - - for (i = 0; i < OHCI_LOOP_COUNT; i++) { - if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) - break; - - mdelay(1); - } - - return reg_read(ohci, OHCI1394_CSRData); -} - -static struct hpsb_host_driver ohci1394_driver = { - .owner = THIS_MODULE, - .name = OHCI1394_DRIVER_NAME, - .set_hw_config_rom = ohci_set_hw_config_rom, - .transmit_packet = ohci_transmit, - .devctl = ohci_devctl, - .isoctl = ohci_isoctl, - .hw_csr_reg = ohci_hw_csr_reg, -}; - -/*********************************** - * PCI Driver Interface functions * - ***********************************/ - -#ifdef CONFIG_PPC_PMAC -static void ohci1394_pmac_on(struct pci_dev *dev) -{ - if (machine_is(powermac)) { - struct device_node *ofn = pci_device_to_OF_node(dev); - - if (ofn) { - pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1); - pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); - } - } -} - -static void ohci1394_pmac_off(struct pci_dev *dev) -{ - if (machine_is(powermac)) { - struct device_node *ofn = pci_device_to_OF_node(dev); - - if (ofn) { - pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); - pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0); - } - } -} -#else -#define ohci1394_pmac_on(dev) -#define ohci1394_pmac_off(dev) -#endif /* CONFIG_PPC_PMAC */ - -static int __devinit ohci1394_pci_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - struct hpsb_host *host; - struct ti_ohci *ohci; /* shortcut to currently handled device */ - resource_size_t ohci_base; - int err = -ENOMEM; - - ohci1394_pmac_on(dev); - if (pci_enable_device(dev)) { - PRINT_G(KERN_ERR, "Failed to enable OHCI hardware"); - err = -ENXIO; - goto err; - } - pci_set_master(dev); - - host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev); - if (!host) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "host structure"); - goto err; - } - ohci = host->hostdata; - ohci->dev = dev; - ohci->host = host; - ohci->init_state = OHCI_INIT_ALLOC_HOST; - host->pdev = dev; - pci_set_drvdata(dev, ohci); - - /* We don't want hardware swapping */ - pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); - - /* Some oddball Apple controllers do not order the selfid - * properly, so we make up for it here. */ -#ifndef __LITTLE_ENDIAN - /* XXX: Need a better way to check this. I'm wondering if we can - * read the values of the OHCI1394_PCI_HCI_Control and the - * noByteSwapData registers to see if they were not cleared to - * zero. Should this work? Obviously it's not defined what these - * registers will read when they aren't supported. Bleh! */ - if (dev->vendor == PCI_VENDOR_ID_APPLE && - dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) { - ohci->no_swap_incoming = 1; - ohci->selfid_swap = 0; - } else - ohci->selfid_swap = 1; -#endif - - -#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_FW -#define PCI_DEVICE_ID_NVIDIA_NFORCE2_FW 0x006e -#endif - - /* These chipsets require a bit of extra care when checking after - * a busreset. */ - if ((dev->vendor == PCI_VENDOR_ID_APPLE && - dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) || - (dev->vendor == PCI_VENDOR_ID_NVIDIA && - dev->device == PCI_DEVICE_ID_NVIDIA_NFORCE2_FW)) - ohci->check_busreset = 1; - - /* We hardwire the MMIO length, since some CardBus adaptors - * fail to report the right length. Anyway, the ohci spec - * clearly says it's 2kb, so this shouldn't be a problem. */ - ohci_base = pci_resource_start(dev, 0); - if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE) - PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!", - (unsigned long long)pci_resource_len(dev, 0)); - - if (!request_mem_region(ohci_base, OHCI1394_REGISTER_SIZE, - OHCI1394_DRIVER_NAME)) { - PRINT_G(KERN_ERR, "MMIO resource (0x%llx - 0x%llx) unavailable", - (unsigned long long)ohci_base, - (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE); - goto err; - } - ohci->init_state = OHCI_INIT_HAVE_MEM_REGION; - - ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE); - if (ohci->registers == NULL) { - PRINT_G(KERN_ERR, "Failed to remap registers"); - err = -ENXIO; - goto err; - } - ohci->init_state = OHCI_INIT_HAVE_IOMAPPING; - DBGMSG("Remapped memory spaces reg 0x%p", ohci->registers); - - /* csr_config rom allocation */ - ohci->csr_config_rom_cpu = - pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN, - &ohci->csr_config_rom_bus); - if (ohci->csr_config_rom_cpu == NULL) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "buffer config rom"); - goto err; - } - ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER; - - /* self-id dma buffer allocation */ - ohci->selfid_buf_cpu = - pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, - &ohci->selfid_buf_bus); - if (ohci->selfid_buf_cpu == NULL) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "self-ID buffer"); - goto err; - } - ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER; - - if ((unsigned long)ohci->selfid_buf_cpu & 0x1fff) - PRINT(KERN_INFO, "SelfID buffer %p is not aligned on " - "8Kb boundary... may cause problems on some CXD3222 chip", - ohci->selfid_buf_cpu); - - /* No self-id errors at startup */ - ohci->self_id_errors = 0; - - ohci->init_state = OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE; - /* AR DMA request context allocation */ - if (alloc_dma_rcv_ctx(ohci, &ohci->ar_req_context, - DMA_CTX_ASYNC_REQ, 0, AR_REQ_NUM_DESC, - AR_REQ_BUF_SIZE, AR_REQ_SPLIT_BUF_SIZE, - OHCI1394_AsReqRcvContextBase) < 0) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "AR Req context"); - goto err; - } - /* AR DMA response context allocation */ - if (alloc_dma_rcv_ctx(ohci, &ohci->ar_resp_context, - DMA_CTX_ASYNC_RESP, 0, AR_RESP_NUM_DESC, - AR_RESP_BUF_SIZE, AR_RESP_SPLIT_BUF_SIZE, - OHCI1394_AsRspRcvContextBase) < 0) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "AR Resp context"); - goto err; - } - /* AT DMA request context */ - if (alloc_dma_trm_ctx(ohci, &ohci->at_req_context, - DMA_CTX_ASYNC_REQ, 0, AT_REQ_NUM_DESC, - OHCI1394_AsReqTrContextBase) < 0) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "AT Req context"); - goto err; - } - /* AT DMA response context */ - if (alloc_dma_trm_ctx(ohci, &ohci->at_resp_context, - DMA_CTX_ASYNC_RESP, 1, AT_RESP_NUM_DESC, - OHCI1394_AsRspTrContextBase) < 0) { - PRINT_G(KERN_ERR, "Failed to allocate %s", "AT Resp context"); - goto err; - } - /* Start off with a soft reset, to clear everything to a sane - * state. */ - ohci_soft_reset(ohci); - - /* Now enable LPS, which we need in order to start accessing - * most of the registers. In fact, on some cards (ALI M5251), - * accessing registers in the SClk domain without LPS enabled - * will lock up the machine. */ - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); - - /* Disable and clear interrupts */ - reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - - /* Flush MMIO writes and wait to make sure we have full link enabled. */ - reg_read(ohci, OHCI1394_Version); - msleep(50); - - /* Determine the number of available IR and IT contexts. */ - ohci->nb_iso_rcv_ctx = - get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet); - ohci->nb_iso_xmit_ctx = - get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet); - - /* Set the usage bits for non-existent contexts so they can't - * be allocated */ - ohci->ir_ctx_usage = ~0 << ohci->nb_iso_rcv_ctx; - ohci->it_ctx_usage = ~0 << ohci->nb_iso_xmit_ctx; - - INIT_LIST_HEAD(&ohci->iso_tasklet_list); - spin_lock_init(&ohci->iso_tasklet_list_lock); - ohci->ISO_channel_usage = 0; - spin_lock_init(&ohci->IR_channel_lock); - - spin_lock_init(&ohci->event_lock); - - /* - * interrupts are disabled, all right, but... due to IRQF_SHARED we - * might get called anyway. We'll see no event, of course, but - * we need to get to that "no event", so enough should be initialized - * by that point. - */ - err = request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, - OHCI1394_DRIVER_NAME, ohci); - if (err) { - PRINT_G(KERN_ERR, "Failed to allocate interrupt %d", dev->irq); - goto err; - } - ohci->init_state = OHCI_INIT_HAVE_IRQ; - ohci_initialize(ohci); - - /* Set certain csr values */ - host->csr.guid_hi = reg_read(ohci, OHCI1394_GUIDHi); - host->csr.guid_lo = reg_read(ohci, OHCI1394_GUIDLo); - host->csr.cyc_clk_acc = 100; /* how do we determine clk accuracy? */ - host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf; - host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7; - - if (phys_dma) { - host->low_addr_space = - (u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16; - if (!host->low_addr_space) - host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED; - } - host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE; - - /* Tell the highlevel this host is ready */ - if (hpsb_add_host(host)) { - PRINT_G(KERN_ERR, "Failed to register host with highlevel"); - goto err; - } - ohci->init_state = OHCI_INIT_DONE; - - return 0; -err: - ohci1394_pci_remove(dev); - return err; -} - -static void ohci1394_pci_remove(struct pci_dev *dev) -{ - struct ti_ohci *ohci; - struct device *device; - - ohci = pci_get_drvdata(dev); - if (!ohci) - goto out; - - device = get_device(&ohci->host->device); - - switch (ohci->init_state) { - case OHCI_INIT_DONE: - hpsb_remove_host(ohci->host); - - /* Clear out BUS Options */ - reg_write(ohci, OHCI1394_ConfigROMhdr, 0); - reg_write(ohci, OHCI1394_BusOptions, - (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) | - 0x00ff0000); - memset(ohci->csr_config_rom_cpu, 0, OHCI_CONFIG_ROM_LEN); - - case OHCI_INIT_HAVE_IRQ: - /* Clear interrupt registers */ - reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); - - /* Disable IRM Contender */ - set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4)); - - /* Clear link control register */ - reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); - - /* Let all other nodes know to ignore us */ - ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); - - /* Soft reset before we start - this disables - * interrupts and clears linkEnable and LPS. */ - ohci_soft_reset(ohci); - free_irq(dev->irq, ohci); - - case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE: - /* The ohci_soft_reset() stops all DMA contexts, so we - * dont need to do this. */ - free_dma_rcv_ctx(&ohci->ar_req_context); - free_dma_rcv_ctx(&ohci->ar_resp_context); - free_dma_trm_ctx(&ohci->at_req_context); - free_dma_trm_ctx(&ohci->at_resp_context); - - case OHCI_INIT_HAVE_SELFID_BUFFER: - pci_free_consistent(dev, OHCI1394_SI_DMA_BUF_SIZE, - ohci->selfid_buf_cpu, - ohci->selfid_buf_bus); - - case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER: - pci_free_consistent(dev, OHCI_CONFIG_ROM_LEN, - ohci->csr_config_rom_cpu, - ohci->csr_config_rom_bus); - - case OHCI_INIT_HAVE_IOMAPPING: - iounmap(ohci->registers); - - case OHCI_INIT_HAVE_MEM_REGION: - release_mem_region(pci_resource_start(dev, 0), - OHCI1394_REGISTER_SIZE); - - case OHCI_INIT_ALLOC_HOST: - pci_set_drvdata(dev, NULL); - } - - if (device) - put_device(device); -out: - ohci1394_pmac_off(dev); -} - -#ifdef CONFIG_PM -static int ohci1394_pci_suspend(struct pci_dev *dev, pm_message_t state) -{ - int err; - struct ti_ohci *ohci = pci_get_drvdata(dev); - - if (!ohci) { - printk(KERN_ERR "%s: tried to suspend nonexisting host\n", - OHCI1394_DRIVER_NAME); - return -ENXIO; - } - DBGMSG("suspend called"); - - /* Clear the async DMA contexts and stop using the controller */ - hpsb_bus_reset(ohci->host); - - /* See ohci1394_pci_remove() for comments on this sequence */ - reg_write(ohci, OHCI1394_ConfigROMhdr, 0); - reg_write(ohci, OHCI1394_BusOptions, - (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) | - 0x00ff0000); - reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); - reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); - set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4)); - reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); - ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); - ohci_soft_reset(ohci); - - free_irq(dev->irq, ohci); - err = pci_save_state(dev); - if (err) { - PRINT(KERN_ERR, "pci_save_state failed with %d", err); - return err; - } - err = pci_set_power_state(dev, pci_choose_state(dev, state)); - if (err) - DBGMSG("pci_set_power_state failed with %d", err); - ohci1394_pmac_off(dev); - - return 0; -} - -static int ohci1394_pci_resume(struct pci_dev *dev) -{ - int err; - struct ti_ohci *ohci = pci_get_drvdata(dev); - - if (!ohci) { - printk(KERN_ERR "%s: tried to resume nonexisting host\n", - OHCI1394_DRIVER_NAME); - return -ENXIO; - } - DBGMSG("resume called"); - - ohci1394_pmac_on(dev); - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - err = pci_enable_device(dev); - if (err) { - PRINT(KERN_ERR, "pci_enable_device failed with %d", err); - return err; - } - - /* See ohci1394_pci_probe() for comments on this sequence */ - ohci_soft_reset(ohci); - reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); - reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); - reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); - reg_read(ohci, OHCI1394_Version); - msleep(50); - - err = request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, - OHCI1394_DRIVER_NAME, ohci); - if (err) { - PRINT_G(KERN_ERR, "Failed to allocate interrupt %d", dev->irq); - return err; - } - - ohci_initialize(ohci); - - hpsb_resume_host(ohci->host); - return 0; -} -#endif /* CONFIG_PM */ - -static struct pci_device_id ohci1394_pci_tbl[] = { - { - .class = PCI_CLASS_SERIAL_FIREWIRE_OHCI, - .class_mask = PCI_ANY_ID, - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, ohci1394_pci_tbl); - -static struct pci_driver ohci1394_pci_driver = { - .name = OHCI1394_DRIVER_NAME, - .id_table = ohci1394_pci_tbl, - .probe = ohci1394_pci_probe, - .remove = ohci1394_pci_remove, -#ifdef CONFIG_PM - .resume = ohci1394_pci_resume, - .suspend = ohci1394_pci_suspend, -#endif -}; - -/*********************************** - * OHCI1394 Video Interface * - ***********************************/ - -/* essentially the only purpose of this code is to allow another - module to hook into ohci's interrupt handler */ - -/* returns zero if successful, one if DMA context is locked up */ -int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg) -{ - int i=0; - - /* stop the channel program if it's still running */ - reg_write(ohci, reg, 0x8000); - - /* Wait until it effectively stops */ - while (reg_read(ohci, reg) & 0x400) { - i++; - if (i>5000) { - PRINT(KERN_ERR, - "Runaway loop while stopping context: %s...", msg ? msg : ""); - return 1; - } - - mb(); - udelay(10); - } - if (msg) PRINT(KERN_ERR, "%s: dma prg stopped", msg); - return 0; -} - -void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet, int type, - void (*func)(unsigned long), unsigned long data) -{ - tasklet_init(&tasklet->tasklet, func, data); - tasklet->type = type; - /* We init the tasklet->link field, so we can list_del() it - * without worrying whether it was added to the list or not. */ - INIT_LIST_HEAD(&tasklet->link); -} - -int ohci1394_register_iso_tasklet(struct ti_ohci *ohci, - struct ohci1394_iso_tasklet *tasklet) -{ - unsigned long flags, *usage; - int n, i, r = -EBUSY; - - if (tasklet->type == OHCI_ISO_TRANSMIT) { - n = ohci->nb_iso_xmit_ctx; - usage = &ohci->it_ctx_usage; - } - else { - n = ohci->nb_iso_rcv_ctx; - usage = &ohci->ir_ctx_usage; - - /* only one receive context can be multichannel (OHCI sec 10.4.1) */ - if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { - if (test_and_set_bit(0, &ohci->ir_multichannel_used)) { - return r; - } - } - } - - spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); - - for (i = 0; i < n; i++) - if (!test_and_set_bit(i, usage)) { - tasklet->context = i; - list_add_tail(&tasklet->link, &ohci->iso_tasklet_list); - r = 0; - break; - } - - spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); - - return r; -} - -void ohci1394_unregister_iso_tasklet(struct ti_ohci *ohci, - struct ohci1394_iso_tasklet *tasklet) -{ - unsigned long flags; - - tasklet_kill(&tasklet->tasklet); - - spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); - - if (tasklet->type == OHCI_ISO_TRANSMIT) - clear_bit(tasklet->context, &ohci->it_ctx_usage); - else { - clear_bit(tasklet->context, &ohci->ir_ctx_usage); - - if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { - clear_bit(0, &ohci->ir_multichannel_used); - } - } - - list_del(&tasklet->link); - - spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); -} - -EXPORT_SYMBOL(ohci1394_stop_context); -EXPORT_SYMBOL(ohci1394_init_iso_tasklet); -EXPORT_SYMBOL(ohci1394_register_iso_tasklet); -EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet); - -/*********************************** - * General module initialization * - ***********************************/ - -MODULE_AUTHOR("Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>"); -MODULE_DESCRIPTION("Driver for PCI OHCI IEEE-1394 controllers"); -MODULE_LICENSE("GPL"); - -static void __exit ohci1394_cleanup (void) -{ - pci_unregister_driver(&ohci1394_pci_driver); -} - -static int __init ohci1394_init(void) -{ - return pci_register_driver(&ohci1394_pci_driver); -} - -module_init(ohci1394_init); -module_exit(ohci1394_cleanup); |