summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/ohci1394.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/ohci1394.c')
-rw-r--r--drivers/ieee1394/ohci1394.c126
1 files changed, 48 insertions, 78 deletions
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index b98b993..a128025 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3529,108 +3529,40 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
-static int ohci1394_pci_resume (struct pci_dev *pdev)
+static int ohci1394_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
int err;
- struct ti_ohci *ohci;
-
-/* PowerMac resume code comes first */
-#ifdef CONFIG_PPC_PMAC
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- /* Re-enable 1394 */
- of_node = pci_device_to_OF_node (pdev);
- if (of_node)
- pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1);
- }
-#endif /* CONFIG_PPC_PMAC */
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- err = pci_enable_device(pdev);
- if (err)
- return err;
-
- ohci = pci_get_drvdata(pdev);
- if (!ohci)
- return -1; /* or which exit status to use? */
-
- PRINT(KERN_DEBUG, "resume called");
-
- /* The following lines are copied from ohci1394_pci_probe(): */
-
- /* Start off with a soft reset, to clear everything to a sane
- * state. */
- ohci_soft_reset(ohci);
-
- /* Now enable LPS, which we need in order to start accessing
- * most of the registers. In fact, on some cards (ALI M5251),
- * accessing registers in the SClk domain without LPS enabled
- * will lock up the machine. Wait 50msec to make sure we have
- * full link enabled. */
- reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
-
- /* Disable and clear interrupts */
- reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
- reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
-
- mdelay(50);
-
- ohci_initialize(ohci);
-
- return 0;
-}
-
-static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
-{
- int err;
- struct ti_ohci *ohci;
-
- ohci = pci_get_drvdata(pdev);
- if (!ohci)
- return -1; /* Not sure if this is the correct return code */
+ struct ti_ohci *ohci = pci_get_drvdata(pdev);
PRINT(KERN_DEBUG, "suspend called");
+ if (!ohci)
+ return -ENXIO;
- /* clear the async DMA contexts and stop using the controller: */
+ /* Clear the async DMA contexts and stop using the controller */
hpsb_bus_reset(ohci->host);
- /* The following calls are from ohci1394_pci_remove(): */
-
- /* Clear out BUS Options */
+ /* See ohci1394_pci_remove() for comments on this sequence */
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
reg_write(ohci, OHCI1394_BusOptions,
(reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
0x00ff0000);
-
- /* Clear interrupt registers */
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
-
- /* Disable IRM Contender */
set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
-
- /* Clear link control register */
reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
-
- /* Let all other nodes know to ignore us */
ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
-
- /* This stops all DMA contexts, disables interrupts,
- * and clears linkEnable and LPS: */
ohci_soft_reset(ohci);
err = pci_save_state(pdev);
if (err)
- goto out;
+ return err;
err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
if (err)
- goto out;
+ return err;
/* PowerMac suspend code comes last */
#ifdef CONFIG_PPC_PMAC
@@ -3643,8 +3575,46 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0);
}
#endif /* CONFIG_PPC_PMAC */
-out:
- return err;
+
+ return 0;
+}
+
+static int ohci1394_pci_resume(struct pci_dev *pdev)
+{
+ int err;
+ struct ti_ohci *ohci = pci_get_drvdata(pdev);
+
+ PRINT(KERN_DEBUG, "resume called");
+ if (!ohci)
+ return -ENXIO;
+
+/* PowerMac resume code comes first */
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ /* Re-enable 1394 */
+ of_node = pci_device_to_OF_node (pdev);
+ if (of_node)
+ pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1);
+ }
+#endif /* CONFIG_PPC_PMAC */
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ /* See ohci1394_pci_probe() for comments on this sequence */
+ ohci_soft_reset(ohci);
+ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
+ reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
+ reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
+ mdelay(50);
+ ohci_initialize(ohci);
+
+ return 0;
}
#endif /* CONFIG_PM */
OpenPOWER on IntegriCloud