summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/ieee1394.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/ieee1394.h')
-rw-r--r--drivers/ieee1394/ieee1394.h220
1 files changed, 0 insertions, 220 deletions
diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h
deleted file mode 100644
index af320e2..0000000
--- a/drivers/ieee1394/ieee1394.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Generic IEEE 1394 definitions
- */
-
-#ifndef _IEEE1394_IEEE1394_H
-#define _IEEE1394_IEEE1394_H
-
-#define TCODE_WRITEQ 0x0
-#define TCODE_WRITEB 0x1
-#define TCODE_WRITE_RESPONSE 0x2
-#define TCODE_READQ 0x4
-#define TCODE_READB 0x5
-#define TCODE_READQ_RESPONSE 0x6
-#define TCODE_READB_RESPONSE 0x7
-#define TCODE_CYCLE_START 0x8
-#define TCODE_LOCK_REQUEST 0x9
-#define TCODE_ISO_DATA 0xa
-#define TCODE_STREAM_DATA 0xa
-#define TCODE_LOCK_RESPONSE 0xb
-
-#define RCODE_COMPLETE 0x0
-#define RCODE_CONFLICT_ERROR 0x4
-#define RCODE_DATA_ERROR 0x5
-#define RCODE_TYPE_ERROR 0x6
-#define RCODE_ADDRESS_ERROR 0x7
-
-#define EXTCODE_MASK_SWAP 0x1
-#define EXTCODE_COMPARE_SWAP 0x2
-#define EXTCODE_FETCH_ADD 0x3
-#define EXTCODE_LITTLE_ADD 0x4
-#define EXTCODE_BOUNDED_ADD 0x5
-#define EXTCODE_WRAP_ADD 0x6
-
-#define ACK_COMPLETE 0x1
-#define ACK_PENDING 0x2
-#define ACK_BUSY_X 0x4
-#define ACK_BUSY_A 0x5
-#define ACK_BUSY_B 0x6
-#define ACK_TARDY 0xb
-#define ACK_CONFLICT_ERROR 0xc
-#define ACK_DATA_ERROR 0xd
-#define ACK_TYPE_ERROR 0xe
-#define ACK_ADDRESS_ERROR 0xf
-
-/* Non-standard "ACK codes" for internal use */
-#define ACKX_NONE (-1)
-#define ACKX_SEND_ERROR (-2)
-#define ACKX_ABORTED (-3)
-#define ACKX_TIMEOUT (-4)
-
-#define IEEE1394_SPEED_100 0x00
-#define IEEE1394_SPEED_200 0x01
-#define IEEE1394_SPEED_400 0x02
-#define IEEE1394_SPEED_800 0x03
-#define IEEE1394_SPEED_1600 0x04
-#define IEEE1394_SPEED_3200 0x05
-#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200
-
-/* Maps speed values above to a string representation */
-extern const char *hpsb_speedto_str[];
-
-/* 1394a cable PHY packets */
-#define SELFID_PWRCL_NO_POWER 0x0
-#define SELFID_PWRCL_PROVIDE_15W 0x1
-#define SELFID_PWRCL_PROVIDE_30W 0x2
-#define SELFID_PWRCL_PROVIDE_45W 0x3
-#define SELFID_PWRCL_USE_1W 0x4
-#define SELFID_PWRCL_USE_3W 0x5
-#define SELFID_PWRCL_USE_6W 0x6
-#define SELFID_PWRCL_USE_10W 0x7
-
-#define SELFID_PORT_CHILD 0x3
-#define SELFID_PORT_PARENT 0x2
-#define SELFID_PORT_NCONN 0x1
-#define SELFID_PORT_NONE 0x0
-
-#define SELFID_SPEED_UNKNOWN 0x3 /* 1394b PHY */
-
-#define PHYPACKET_LINKON 0x40000000
-#define PHYPACKET_PHYCONFIG_R 0x00800000
-#define PHYPACKET_PHYCONFIG_T 0x00400000
-#define EXTPHYPACKET_TYPE_PING 0x00000000
-#define EXTPHYPACKET_TYPE_REMOTEACCESS_BASE 0x00040000
-#define EXTPHYPACKET_TYPE_REMOTEACCESS_PAGED 0x00140000
-#define EXTPHYPACKET_TYPE_REMOTEREPLY_BASE 0x000C0000
-#define EXTPHYPACKET_TYPE_REMOTEREPLY_PAGED 0x001C0000
-#define EXTPHYPACKET_TYPE_REMOTECOMMAND 0x00200000
-#define EXTPHYPACKET_TYPE_REMOTECONFIRMATION 0x00280000
-#define EXTPHYPACKET_TYPE_RESUME 0x003C0000
-
-#define EXTPHYPACKET_TYPEMASK 0xC0FC0000
-
-#define PHYPACKET_PORT_SHIFT 24
-#define PHYPACKET_GAPCOUNT_SHIFT 16
-
-/* 1394a PHY register map bitmasks */
-#define PHY_00_PHYSICAL_ID 0xFC
-#define PHY_00_R 0x02 /* Root */
-#define PHY_00_PS 0x01 /* Power Status*/
-#define PHY_01_RHB 0x80 /* Root Hold-Off */
-#define PHY_01_IBR 0x80 /* Initiate Bus Reset */
-#define PHY_01_GAP_COUNT 0x3F
-#define PHY_02_EXTENDED 0xE0 /* 0x7 for 1394a-compliant PHY */
-#define PHY_02_TOTAL_PORTS 0x1F
-#define PHY_03_MAX_SPEED 0xE0
-#define PHY_03_DELAY 0x0F
-#define PHY_04_LCTRL 0x80 /* Link Active Report Control */
-#define PHY_04_CONTENDER 0x40
-#define PHY_04_JITTER 0x38
-#define PHY_04_PWR_CLASS 0x07 /* Power Class */
-#define PHY_05_WATCHDOG 0x80
-#define PHY_05_ISBR 0x40 /* Initiate Short Bus Reset */
-#define PHY_05_LOOP 0x20 /* Loop Detect */
-#define PHY_05_PWR_FAIL 0x10 /* Cable Power Failure Detect */
-#define PHY_05_TIMEOUT 0x08 /* Arbitration State Machine Timeout */
-#define PHY_05_PORT_EVENT 0x04 /* Port Event Detect */
-#define PHY_05_ENAB_ACCEL 0x02 /* Enable Arbitration Acceleration */
-#define PHY_05_ENAB_MULTI 0x01 /* Ena. Multispeed Packet Concatenation */
-
-#include <asm/byteorder.h>
-
-/* '1' '3' '9' '4' in ASCII */
-#define IEEE1394_BUSID_MAGIC cpu_to_be32(0x31333934)
-
-#ifdef __BIG_ENDIAN_BITFIELD
-
-struct selfid {
- u32 packet_identifier:2; /* always binary 10 */
- u32 phy_id:6;
- /* byte */
- u32 extended:1; /* if true is struct ext_selfid */
- u32 link_active:1;
- u32 gap_count:6;
- /* byte */
- u32 speed:2;
- u32 phy_delay:2;
- u32 contender:1;
- u32 power_class:3;
- /* byte */
- u32 port0:2;
- u32 port1:2;
- u32 port2:2;
- u32 initiated_reset:1;
- u32 more_packets:1;
-} __attribute__((packed));
-
-struct ext_selfid {
- u32 packet_identifier:2; /* always binary 10 */
- u32 phy_id:6;
- /* byte */
- u32 extended:1; /* if false is struct selfid */
- u32 seq_nr:3;
- u32 reserved:2;
- u32 porta:2;
- /* byte */
- u32 portb:2;
- u32 portc:2;
- u32 portd:2;
- u32 porte:2;
- /* byte */
- u32 portf:2;
- u32 portg:2;
- u32 porth:2;
- u32 reserved2:1;
- u32 more_packets:1;
-} __attribute__((packed));
-
-#elif defined __LITTLE_ENDIAN_BITFIELD /* __BIG_ENDIAN_BITFIELD */
-
-/*
- * Note: these mean to be bit fields of a big endian SelfID as seen on a little
- * endian machine. Without swapping.
- */
-
-struct selfid {
- u32 phy_id:6;
- u32 packet_identifier:2; /* always binary 10 */
- /* byte */
- u32 gap_count:6;
- u32 link_active:1;
- u32 extended:1; /* if true is struct ext_selfid */
- /* byte */
- u32 power_class:3;
- u32 contender:1;
- u32 phy_delay:2;
- u32 speed:2;
- /* byte */
- u32 more_packets:1;
- u32 initiated_reset:1;
- u32 port2:2;
- u32 port1:2;
- u32 port0:2;
-} __attribute__((packed));
-
-struct ext_selfid {
- u32 phy_id:6;
- u32 packet_identifier:2; /* always binary 10 */
- /* byte */
- u32 porta:2;
- u32 reserved:2;
- u32 seq_nr:3;
- u32 extended:1; /* if false is struct selfid */
- /* byte */
- u32 porte:2;
- u32 portd:2;
- u32 portc:2;
- u32 portb:2;
- /* byte */
- u32 more_packets:1;
- u32 reserved2:1;
- u32 porth:2;
- u32 portg:2;
- u32 portf:2;
-} __attribute__((packed));
-
-#else
-#error What? PDP endian?
-#endif /* __BIG_ENDIAN_BITFIELD */
-
-#endif /* _IEEE1394_IEEE1394_H */
OpenPOWER on IntegriCloud