summaryrefslogtreecommitdiffstats
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig18
-rw-r--r--drivers/ide/ide-cd.c8
-rw-r--r--drivers/ide/ide-disk.c15
-rw-r--r--drivers/ide/ide-dma.c2
-rw-r--r--drivers/ide/ide-probe.c4
-rw-r--r--drivers/ide/ide-tape.c10
-rw-r--r--drivers/ide/mips/Makefile1
-rw-r--r--drivers/ide/mips/swarm.c196
8 files changed, 39 insertions, 215 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index fc735ab..052879a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -292,6 +292,20 @@ config IDE_GENERIC
tristate "generic/default IDE chipset support"
depends on ALPHA || X86 || IA64 || M32R || MIPS
help
+ This is the generic IDE driver. This driver attaches to the
+ fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
+ so on). Please note that if this driver is built into the
+ kernel or loaded before other ATA (IDE or libata) drivers
+ and the controller is located at legacy ports, this driver
+ may grab those ports and thus can prevent the controller
+ specific driver from attaching.
+
+ Also, currently, IDE generic doesn't allow IRQ sharing
+ meaning that the IRQs it grabs won't be available to other
+ controllers sharing those IRQs which usually makes drivers
+ for those controllers fail. Generally, it's not a good idea
+ to load IDE generic driver on modern systems.
+
If unsure, say N.
config BLK_DEV_PLATFORM
@@ -766,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC
to transfer data to and from memory. Saying Y is safe and improves
performance.
-config BLK_DEV_IDE_SWARM
- tristate "IDE for Sibyte evaluation boards"
- depends on SIBYTE_SB1xxx_SOC
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 49a8c58..03c2cb6 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1113,7 +1113,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
if (write) {
/* disk has become write protected */
- if (cd->disk->policy) {
+ if (get_disk_ro(cd->disk)) {
cdrom_end_request(drive, 0);
return ide_stopped;
}
@@ -1661,7 +1661,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
cdi->mask &= ~CDC_PLAY_AUDIO;
mechtype = buf[8 + 6] >> 5;
- if (mechtype == mechtype_caddy || mechtype == mechtype_popup)
+ if (mechtype == mechtype_caddy ||
+ mechtype == mechtype_popup ||
+ (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE))
cdi->mask |= CDC_CLOSE_TRAY;
if (cdi->sanyo_slot > 0) {
@@ -1859,6 +1861,8 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
{ "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
{ "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
{ "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE },
{ NULL, NULL, 0 }
};
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 07ef88b..33ea8c0 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -41,6 +41,12 @@
#include <asm/io.h>
#include <asm/div64.h>
+#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
+#define IDE_DISK_MINORS (1 << PARTN_BITS)
+#else
+#define IDE_DISK_MINORS 0
+#endif
+
struct ide_disk_obj {
ide_drive_t *drive;
ide_driver_t *driver;
@@ -1151,8 +1157,7 @@ static int ide_disk_probe(ide_drive_t *drive)
if (!idkp)
goto failed;
- g = alloc_disk_node(1 << PARTN_BITS,
- hwif_to_node(drive->hwif));
+ g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;
@@ -1178,9 +1183,11 @@ static int ide_disk_probe(ide_drive_t *drive)
} else
drive->attach = 1;
- g->minors = 1 << PARTN_BITS;
+ g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
- g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
+ g->flags |= GENHD_FL_EXT_DEVT;
+ if (drive->removable)
+ g->flags |= GENHD_FL_REMOVABLE;
set_capacity(g, idedisk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index adc6827..3fa07c0 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -211,7 +211,7 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
xcount = bcount & 0xffff;
if (is_trm290)
xcount = ((xcount >> 2) - 1) << 16;
- if (xcount == 0x0000) {
+ else if (xcount == 0x0000) {
/*
* Most chipsets correctly interpret a length of 0x0000 as 64KB,
* but at least one (e.g. CS5530) misinterprets it as zero (!).
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 994e410..70aa86c 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1188,7 +1188,7 @@ static struct kobject *exact_match(dev_t dev, int *part, void *data)
{
struct gendisk *p = data;
*part &= (1 << PARTN_BITS) - 1;
- return &p->dev.kobj;
+ return &disk_to_dev(p)->kobj;
}
static int exact_lock(dev_t dev, void *data)
@@ -1492,7 +1492,7 @@ static struct device_attribute *ide_port_attrs[] = {
static int ide_sysfs_register_port(ide_hwif_t *hwif)
{
- int i, rc;
+ int i, uninitialized_var(rc);
for (i = 0; ide_port_attrs[i]; i++) {
rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1bce84b..3833189 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2338,7 +2338,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
@@ -2350,11 +2350,11 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile
index 677c7b2..5873fa0 100644
--- a/drivers/ide/mips/Makefile
+++ b/drivers/ide/mips/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o
obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o
EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
deleted file mode 100644
index badf79f..0000000
--- a/drivers/ide/mips/swarm.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
- * Author: Maciej W. Rozycki <macro@mips.com>
- * Copyright (c) 2006, 2008 Maciej W. Rozycki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Derived loosely from ide-pmac.c, so:
- * Copyright (C) 1998 Paul Mackerras.
- * Copyright (C) 1995-1998 Mark Lord
- */
-
-/*
- * Boards with SiByte processors so far have supported IDE devices via
- * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all
- * cases, byte-swapping must be avoided for these devices (whereas
- * other PCI devices, for example, will require swapping). Any
- * SiByte-targetted kernel including IDE support will include this
- * file. Probing of a Generic Bus for an IDE device is controlled by
- * the definition of "SIBYTE_HAVE_IDE", which is provided by
- * <asm/sibyte/board.h> for Broadcom boards.
- */
-
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-
-#include <asm/sibyte/board.h>
-#include <asm/sibyte/sb1250_genbus.h>
-#include <asm/sibyte/sb1250_regs.h>
-
-#define DRV_NAME "ide-swarm"
-
-static char swarm_ide_string[] = DRV_NAME;
-
-static struct resource swarm_ide_resource = {
- .name = "SWARM GenBus IDE",
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device *swarm_ide_dev;
-
-static const struct ide_port_info swarm_port_info = {
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-};
-
-/*
- * swarm_ide_probe - if the board header indicates the existence of
- * Generic Bus IDE, allocate a HWIF for it.
- */
-static int __devinit swarm_ide_probe(struct device *dev)
-{
- u8 __iomem *base;
- struct ide_host *host;
- phys_t offset, size;
- int i, rc;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
- if (!SIBYTE_HAVE_IDE)
- return -ENODEV;
-
- base = ioremap(A_IO_EXT_BASE, 0x800);
- offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
- size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
- iounmap(base);
-
- offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
- size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
- if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
- printk(KERN_INFO DRV_NAME
- ": IDE interface at GenBus disabled\n");
- return -EBUSY;
- }
-
- printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n",
- IDE_CS);
-
- swarm_ide_resource.start = offset;
- swarm_ide_resource.end = offset + size - 1;
- if (request_resource(&iomem_resource, &swarm_ide_resource)) {
- printk(KERN_ERR DRV_NAME
- ": can't request I/O memory resource\n");
- return -EBUSY;
- }
-
- base = ioremap(offset, size);
-
- for (i = 0; i <= 7; i++)
- hw.io_ports_array[i] =
- (unsigned long)(base + ((0x1f0 + i) << 5));
- hw.io_ports.ctl_addr =
- (unsigned long)(base + (0x3f6 << 5));
- hw.irq = K_INT_GB_IDE;
- hw.chipset = ide_generic;
-
- rc = ide_host_add(&swarm_port_info, hws, &host);
- if (rc)
- goto err;
-
- dev_set_drvdata(dev, host);
-
- return 0;
-err:
- release_resource(&swarm_ide_resource);
- iounmap(base);
- return rc;
-}
-
-static struct device_driver swarm_ide_driver = {
- .name = swarm_ide_string,
- .bus = &platform_bus_type,
- .probe = swarm_ide_probe,
-};
-
-static void swarm_ide_platform_release(struct device *device)
-{
- struct platform_device *pldev;
-
- /* free device */
- pldev = to_platform_device(device);
- kfree(pldev);
-}
-
-static int __devinit swarm_ide_init_module(void)
-{
- struct platform_device *pldev;
- int err;
-
- printk(KERN_INFO "SWARM IDE driver\n");
-
- if (driver_register(&swarm_ide_driver)) {
- printk(KERN_ERR "Driver registration failed\n");
- err = -ENODEV;
- goto out;
- }
-
- if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) {
- err = -ENOMEM;
- goto out_unregister_driver;
- }
-
- pldev->name = swarm_ide_string;
- pldev->id = 0;
- pldev->dev.release = swarm_ide_platform_release;
-
- if (platform_device_register(pldev)) {
- err = -ENODEV;
- goto out_free_pldev;
- }
-
- if (!pldev->dev.driver) {
- /*
- * The driver was not bound to this device, there was
- * no hardware at this address. Unregister it, as the
- * release fuction will take care of freeing the
- * allocated structure
- */
- platform_device_unregister (pldev);
- }
-
- swarm_ide_dev = pldev;
-
- return 0;
-
-out_free_pldev:
- kfree(pldev);
-
-out_unregister_driver:
- driver_unregister(&swarm_ide_driver);
-out:
- return err;
-}
-
-module_init(swarm_ide_init_module);
OpenPOWER on IntegriCloud