diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/ide/Makefile | 2 | ||||
| -rw-r--r-- | drivers/ide/ide-cd.c | 6 | ||||
| -rw-r--r-- | drivers/ide/ide-disk.c | 4 | ||||
| -rw-r--r-- | drivers/ide/ide-floppy.c | 7 | ||||
| -rw-r--r-- | drivers/ide/ide-io.c | 6 | ||||
| -rw-r--r-- | drivers/ide/ide-lib.c | 8 | ||||
| -rw-r--r-- | drivers/ide/ide-tape.c | 7 | ||||
| -rw-r--r-- | drivers/ide/ide-taskfile.c | 27 | ||||
| -rw-r--r-- | drivers/ide/mips/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ide/mips/swarm.c | 201 | ||||
| -rw-r--r-- | drivers/ide/pci/aec62xx.c | 47 | ||||
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 9 | ||||
| -rw-r--r-- | drivers/ide/pci/cs5520.c | 5 | ||||
| -rw-r--r-- | drivers/ide/pci/siimage.c | 8 | ||||
| -rw-r--r-- | drivers/ide/pci/sis5513.c | 1 | ||||
| -rw-r--r-- | drivers/ide/pci/via82cxxx.c | 407 | ||||
| -rw-r--r-- | drivers/ide/ppc/pmac.c | 14 | ||||
| -rw-r--r-- | drivers/ide/setup-pci.c | 2 |
19 files changed, 377 insertions, 391 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 42e5b81..31e649a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -625,7 +625,7 @@ config BLK_DEV_NS87415 tristate "NS87415 chipset support" help This driver adds detection and support for the NS87415 chip - (used in SPARC64, among others). + (used mainly on SPARC64 and PA-RISC machines). Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>. @@ -787,6 +787,10 @@ config BLK_DEV_IDE_PMAC_BLINK This option enables the use of the sleep LED as a hard drive activity LED. +config BLK_DEV_IDE_SWARM + tristate "IDE for Sibyte evaluation boards" + depends on SIBYTE_SB1xxx_SOC + config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cca9c07..569fae7 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -48,6 +48,6 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ +obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/ obj-$(CONFIG_BLK_DEV_HD) += legacy/ obj-$(CONFIG_ETRAX_IDE) += cris/ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c2f4792..9455e42 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3328,8 +3328,8 @@ static ide_proc_entry_t idecd_proc[] = { #endif static ide_driver_t ide_cdrom_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-cdrom", .bus = &ide_bus_type, .probe = ide_cd_probe, @@ -3510,8 +3510,8 @@ static void __exit ide_cdrom_exit(void) { driver_unregister(&ide_cdrom_driver.gen_driver); } - -static int ide_cdrom_init(void) + +static int __init ide_cdrom_init(void) { return driver_register(&ide_cdrom_driver.gen_driver); } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index e827b39..f4e3d35 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1089,8 +1089,8 @@ static void ide_device_shutdown(struct device *dev) } static ide_driver_t idedisk_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-disk", .bus = &ide_bus_type, .probe = ide_disk_probe, @@ -1266,7 +1266,7 @@ static void __exit idedisk_exit (void) driver_unregister(&idedisk_driver.gen_driver); } -static int idedisk_init (void) +static int __init idedisk_init(void) { return driver_register(&idedisk_driver.gen_driver); } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index f615ab7..9e293c8 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1925,8 +1925,8 @@ static ide_proc_entry_t idefloppy_proc[] = { static int ide_floppy_probe(struct device *); static ide_driver_t idefloppy_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-floppy", .bus = &ide_bus_type, .probe = ide_floppy_probe, @@ -2191,10 +2191,7 @@ static void __exit idefloppy_exit (void) driver_unregister(&idefloppy_driver.gen_driver); } -/* - * idefloppy_init will register the driver for each floppy. - */ -static int idefloppy_init (void) +static int __init idefloppy_init(void) { printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); return driver_register(&idefloppy_driver.gen_driver); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 5275cbb..ecfafcd 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1629,12 +1629,6 @@ EXPORT_SYMBOL(ide_init_drive_cmd); * for the new rq to be completed. This is VERY DANGEROUS, and is * intended for careful use by the ATAPI tape/cdrom driver code. * - * If action is ide_next, then the rq is queued immediately after - * the currently-being-processed-request (if any), and the function - * returns without waiting for the new rq to be completed. As above, - * This is VERY DANGEROUS, and is intended for careful use by the - * ATAPI tape/cdrom driver code. - * * If action is ide_end, then the rq is queued at the end of the * request queue, and the function returns immediately without waiting * for the new rq to be completed. This is again intended for careful diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index b09a653..41d46db 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -410,10 +410,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) { u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */ - if (on && drive->media == ide_disk) { - if (!PCI_DMA_BUS_IS_PHYS) - addr = BLK_BOUNCE_ANY; - else if (HWIF(drive)->pci_dev) + if (!PCI_DMA_BUS_IS_PHYS) { + addr = BLK_BOUNCE_ANY; + } else if (on && drive->media == ide_disk) { + if (HWIF(drive)->pci_dev) addr = HWIF(drive)->pci_dev->dma_mask; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0ac7eb8..7d7944e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4748,8 +4748,8 @@ static ide_proc_entry_t idetape_proc[] = { static int ide_tape_probe(struct device *); static ide_driver_t idetape_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-tape", .bus = &ide_bus_type, .probe = ide_tape_probe, @@ -4916,10 +4916,7 @@ static void __exit idetape_exit (void) unregister_chrdev(IDETAPE_MAJOR, "ht"); } -/* - * idetape_init will register the driver for each tape. - */ -static int idetape_init (void) +static int __init idetape_init(void) { int error = 1; idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 54f9639..62ebefd 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -51,8 +51,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#define DEBUG_TASKFILE 0 /* unset when fixed */ - static void ata_bswap_data (void *buffer, int wcount) { u16 *p = buffer; @@ -765,9 +763,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) ide_hwif_t *hwif = HWIF(drive); task_struct_t *taskfile = (task_struct_t *) task->tfRegister; hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; -#if DEBUG_TASKFILE - u8 status; -#endif if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -778,19 +773,13 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) } /* - * (ks) Check taskfile in/out flags. + * (ks) Check taskfile in flags. * If set, then execute as it is defined. * If not set, then define default settings. * The default values are: - * write and read all taskfile registers (except data) - * write and read the hob registers (sector,nsector,lcyl,hcyl) + * read all taskfile registers (except data) + * read the hob registers (sector, nsector, lcyl, hcyl) */ - if (task->tf_out_flags.all == 0) { - task->tf_out_flags.all = IDE_TASKFILE_STD_OUT_FLAGS; - if (drive->addressing == 1) - task->tf_out_flags.all |= (IDE_HOB_STD_OUT_FLAGS << 8); - } - if (task->tf_in_flags.all == 0) { task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; if (drive->addressing == 1) @@ -803,16 +792,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); SELECT_MASK(drive, 0); -#if DEBUG_TASKFILE - status = hwif->INB(IDE_STATUS_REG); - if (status & 0x80) { - printk("flagged_taskfile -> Bad status. Status = %02x. wait 100 usec ...\n", status); - udelay(100); - status = hwif->INB(IDE_STATUS_REG); - printk("flagged_taskfile -> Status = %02x\n", status); - } -#endif - if (task->tf_out_flags.b.data) { u16 data = taskfile->data + (hobfile->data << 8); hwif->OUTW(data, IDE_DATA_REG); diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile new file mode 100644 index 0000000..578e52a --- /dev/null +++ b/drivers/ide/mips/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c new file mode 100644 index 0000000..66f6064 --- /dev/null +++ b/drivers/ide/mips/swarm.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2001, 2002, 2003 Broadcom Corporation + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * Derived loosely from ide-pmac.c, so: + * Copyright (C) 1998 Paul Mackerras. + * Copyright (C) 1995-1998 Mark Lord + */ + +/* + * Boards with SiByte processors so far have supported IDE devices via + * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all + * cases, byte-swapping must be avoided for these devices (whereas + * other PCI devices, for example, will require swapping). Any + * SiByte-targetted kernel including IDE support will include this + * file. Probing of a Generic Bus for an IDE device is controlled by + * the definition of "SIBYTE_HAVE_IDE", which is provided by + * <asm/sibyte/board.h> for Broadcom boards. + */ + +#include <linux/ide.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include <asm/sibyte/board.h> +#include <asm/sibyte/sb1250_genbus.h> +#include <asm/sibyte/sb1250_regs.h> + +#define DRV_NAME "ide-swarm" + +static char swarm_ide_string[] = DRV_NAME; + +static struct resource swarm_ide_resource = { + .name = "SWARM GenBus IDE", + .flags = IORESOURCE_MEM, +}; + +static struct platform_device *swarm_ide_dev; + +/* + * swarm_ide_probe - if the board header indicates the existence of + * Generic Bus IDE, allocate a HWIF for it. + */ +static int __devinit swarm_ide_probe(struct device *dev) +{ + ide_hwif_t *hwif; + u8 __iomem *base; + phys_t offset, size; + int i; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + /* Find an empty slot. */ + for (i = 0; i < MAX_HWIFS; i++) + if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET]) + break; + if (i >= MAX_HWIFS) { + printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); + return -ENOMEM; + } + + hwif = ide_hwifs + i; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + printk(KERN_INFO DRV_NAME + ": IDE interface at GenBus disabled\n"); + return -EBUSY; + } + + printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", + IDE_CS); + + swarm_ide_resource.start = offset; + swarm_ide_resource.end = offset + size - 1; + if (request_resource(&iomem_resource, &swarm_ide_resource)) { + printk(KERN_ERR DRV_NAME + ": can't request I/O memory resource\n"); + return -EBUSY; + } + + base = ioremap(offset, size); + + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + /* Prevent resource map manipulation. */ + hwif->mmio = 2; + hwif->noprobe = 0; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) + hwif->hw.io_ports[i] = + (unsigned long)(base + ((0x1f0 + i) << 5)); + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = + (unsigned long)(base + (0x3f6 << 5)); + hwif->hw.irq = K_INT_GB_IDE; + + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports)); + hwif->irq = hwif->hw.irq; + + dev_set_drvdata(dev, hwif); + + return 0; +} + +static struct device_driver swarm_ide_driver = { + .name = swarm_ide_string, + .bus = &platform_bus_type, + .probe = swarm_ide_probe, +}; + +static void swarm_ide_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __devinit swarm_ide_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "SWARM IDE driver\n"); + + if (driver_register(&swarm_ide_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = swarm_ide_string; + pldev->id = 0; + pldev->dev.release = swarm_ide_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + swarm_ide_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&swarm_ide_driver); +out: + return err; +} + +module_init(swarm_ide_init_module); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 52cadc0..a21b1e1 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { #define BUSCLOCK(D) \ ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) -#if 0 - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { - (void) pci_read_config_byte(dev, 0x54, &art); - p += sprintf(p, "DMA Mode: %s(%s)", - (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", - (art&0x02)?"2":(art&0x01)?"1":"0"); - p += sprintf(p, " %s(%s)", - (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", - (art&0x08)?"2":(art&0x04)?"1":"0"); - p += sprintf(p, " %s(%s)", - (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", - (art&0x20)?"2":(art&0x10)?"1":"0"); - p += sprintf(p, " %s(%s)\n", - (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", - (art&0x80)?"2":(art&0x40)?"1":"0"); - } else { -#endif /* * TO DO: active tuning and correction of cards without a bios. @@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive) switch(hwif->pci_dev->device) { case PCI_DEVICE_ID_ARTOP_ATP865: case PCI_DEVICE_ID_ARTOP_ATP865R: -#if 0 - mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; -#else mode = (hwif->INB(((hwif->channel) ? hwif->mate->dma_status : hwif->dma_status)) & 0x10) ? 4 : 3; -#endif break; case PCI_DEVICE_ID_ARTOP_ATP860: case PCI_DEVICE_ID_ARTOP_ATP860R: @@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive) case PCI_DEVICE_ID_ARTOP_ATP865: case PCI_DEVICE_ID_ARTOP_ATP865R: printk(" AEC62XX time out "); -#if 0 - { - int i = 0; - u8 reg49h = 0; - pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); - for (i=0;i<256;i++) - pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); - pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); - } - return 0; -#endif default: break; } -#if 0 - { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 tmp1 = 0, tmp2 = 0, mode6 = 0; - - pci_read_config_byte(dev, 0x44, &tmp1); - pci_read_config_byte(dev, 0x45, &tmp2); - printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); - mode6 = HWIF(drive)->INB(((hwif->channel) ? - hwif->mate->dma_status : - hwif->dma_status)); - printk(" AEC6280 133=%x ", (mode6 & 0x10)); - } -#endif return 0; } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 6cf4939..cf84350 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -876,10 +876,15 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = { static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + static struct pci_device_id ati_rs100[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) }, + { }, + }; + ide_pci_device_t *d = &ali15x3_chipset; - if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL)) - printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n"); + if (pci_dev_present(ati_rs100)) + printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); #if defined(CONFIG_SPARC64) d->init_hwif = init_hwif_common_ali15x3; diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 7dc2468..ea3c52c 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -222,10 +222,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic /* We must not grab the entire device, it has 'ISA' space in its BARS too and we will freak out other bits of the kernel */ - if(pci_enable_device_bars(dev, 1<<2)) - { + if (pci_enable_device_bars(dev, 1<<2)) { printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); - return 1; + return -ENODEV; } pci_set_master(dev); if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 022d244..f1ca154 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -6,7 +6,13 @@ * * May be copied or modified under the terms of the GNU General Public License * - * Documentation available under NDA only + * Documentation for CMD680: + * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2 + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Errata and other documentation only available under NDA. * * * FAQ Items: diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 16b3e2d..75a2253 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -87,6 +87,7 @@ static const struct { u8 chipset_family; u8 flags; } SiSHostChipInfo[] = { + { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a4d099c..7161ce0 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -79,6 +79,7 @@ static struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -100,185 +101,14 @@ static struct via_isa_bridge { { NULL } }; -static struct via_isa_bridge *via_config; -static unsigned int via_80w; static unsigned int via_clock; static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; -/* - * VIA /proc entry. - */ - -#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) - -#include <linux/stat.h> -#include <linux/proc_fs.h> - -static u8 via_proc = 0; -static unsigned long via_base; -static struct pci_dev *bmide_dev, *isa_dev; - -static char *via_control3[] = { "No limit", "64", "128", "192" }; - -#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg) -#define via_print_drive(name, format, arg...)\ - p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); - - -/** - * via_get_info - generate via /proc file - * @buffer: buffer for data - * @addr: set to start of data to use - * @offset: current file offset - * @count: size of read - * - * Fills in buffer with the debugging/configuration information for - * the VIA chipset tuning and attached drives - */ - -static int via_get_info(char *buffer, char **addr, off_t offset, int count) +struct via82cxxx_dev { - int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], - uen[4], udma[4], umul[4], active8b[4], recover8b[4]; - struct pci_dev *dev = bmide_dev; - unsigned int v, u, i; - int len; - u16 c, w; - u8 t, x; - char *p = buffer; - - via_print("----------VIA BusMastering IDE Configuration" - "----------------"); - - via_print("Driver Version: 3.38"); - via_print("South Bridge: VIA %s", - via_config->name); - - pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); - pci_read_config_byte(dev, PCI_REVISION_ID, &x); - via_print("Revision: ISA %#x IDE %#x", t, x); - via_print("Highest DMA rate: %s", - via_dma[via_config->flags & VIA_UDMA]); - - via_print("BM-DMA base: %#lx", via_base); - via_print("PCI clock: %d.%dMHz", - via_clock / 1000, via_clock / 100 % 10); - - pci_read_config_byte(dev, VIA_MISC_1, &t); - via_print("Master Read Cycle IRDY: %dws", - (t & 64) >> 6); - via_print("Master Write Cycle IRDY: %dws", - (t & 32) >> 5); - via_print("BM IDE Status Register Read Retry: %s", - (t & 8) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_MISC_3, &t); - via_print("Max DRDY Pulse Width: %s%s", - via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : ""); - - via_print("-----------------------Primary IDE" - "-------Secondary IDE------"); - via_print("Read DMA FIFO flush: %10s%20s", - (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no"); - via_print("End Sector FIFO flush: %10s%20s", - (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_IDE_CONFIG, &t); - via_print("Prefetch Buffer: %10s%20s", - (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); - via_print("Post Write Buffer: %10s%20s", - (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &t); - via_print("Enabled: %10s%20s", - (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); - - c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8); - via_print("Simplex only: %10s%20s", - (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); - - via_print("Cable Type: %10s%20s", - (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w"); - - via_print("-------------------drive0----drive1" - "----drive2----drive3-----"); - - pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v); - pci_read_config_word(dev, VIA_8BIT_TIMING, &w); - - if (via_config->flags & VIA_UDMA) - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - else u = 0; - - for (i = 0; i < 4; i++) { - - setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; - recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; - active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; - active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; - recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; - udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2; - umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2; - uen[i] = ((u >> ((3 - i) << 3)) & 0x20); - den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); - - speed[i] = 2 * via_clock / (active[i] + recover[i]); - cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock; - - if (!uen[i] || !den[i]) - continue; - - switch (via_config->flags & VIA_UDMA) { - - case VIA_UDMA_33: - speed[i] = 2 * via_clock / udma[i]; - cycle[i] = 1000000 * udma[i] / via_clock; - break; - - case VIA_UDMA_66: - speed[i] = 4 * via_clock / (udma[i] * umul[i]); - cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock; - break; - - case VIA_UDMA_100: - speed[i] = 6 * via_clock / udma[i]; - cycle[i] = 333333 * udma[i] / via_clock; - break; - - case VIA_UDMA_133: - speed[i] = 8 * via_clock / udma[i]; - cycle[i] = 250000 * udma[i] / via_clock; - break; - } - } - - via_print_drive("Transfer Mode: ", "%10s", - den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); - - via_print_drive("Address Setup: ", "%8dns", - 1000000 * setup[i] / via_clock); - via_print_drive("Cmd Active: ", "%8dns", - 1000000 * active8b[i] / via_clock); - via_print_drive("Cmd Recovery: ", "%8dns", - 1000000 * recover8b[i] / via_clock); - via_print_drive("Data Active: ", "%8dns", - 1000000 * active[i] / via_clock); - via_print_drive("Data Recovery: ", "%8dns", - 1000000 * recover[i] / via_clock); - via_print_drive("Cycle Time: ", "%8dns", - cycle[i]); - via_print_drive("Transfer Rate: ", "%4d.%dMB/s", - speed[i] / 1000, speed[i] / 100 % 10); - - /* hoping it is less than 4K... */ - len = (p - buffer) - offset; - *addr = buffer + offset; - - return len > count ? count : len; -} - -#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ + struct via_isa_bridge *via_config; + unsigned int via_80w; +}; /** * via_set_speed - write timing registers @@ -289,11 +119,13 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count) * via_set_speed writes timing values to the chipset registers */ -static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) +static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) { + struct pci_dev *dev = hwif->pci_dev; + struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); u8 t; - if (~via_config->flags & VIA_BAD_AST) { + if (~vdev->via_config->flags & VIA_BAD_AST) { pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); @@ -305,7 +137,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); - switch (via_config->flags & VIA_UDMA) { + switch (vdev->via_config->flags & VIA_UDMA) { case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; @@ -329,6 +161,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) static int via_set_drive(ide_drive_t *drive, u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif); struct ide_timing t, p; unsigned int T, UT; @@ -337,7 +170,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) T = 1000000000 / via_clock; - switch (via_config->flags & VIA_UDMA) { + switch (vdev->via_config->flags & VIA_UDMA) { case VIA_UDMA_33: UT = T; break; case VIA_UDMA_66: UT = T/2; break; case VIA_UDMA_100: UT = T/3; break; @@ -352,7 +185,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } - via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + via_set_speed(HWIF(drive), drive->dn, &t); if (!drive->init_speed) drive->init_speed = speed; @@ -390,20 +223,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { - u16 w80 = HWIF(drive)->udma_four; + ide_hwif_t *hwif = HWIF(drive); + struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + u16 w80 = hwif->udma_four; u16 speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | - (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); + (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); via_set_drive(drive, speed); if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) - return HWIF(drive)->ide_dma_on(drive); - return HWIF(drive)->ide_dma_off_quietly(drive); + return hwif->ide_dma_on(drive); + return hwif->ide_dma_off_quietly(drive); +} + +static struct via_isa_bridge *via_config_find(struct pci_dev **isa) +{ + struct via_isa_bridge *via_config; + u8 t; + + for (via_config = via_isa_bridges; via_config->id; via_config++) + if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA + + !!(via_config->flags & VIA_BAD_ID), + via_config->id, NULL))) { + + pci_read_config_byte(*isa, PCI_REVISION_ID, &t); + if (t >= via_config->rev_min && + t <= via_config->rev_max) + break; + } + + return via_config; } /** @@ -418,82 +272,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive) static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) { struct pci_dev *isa = NULL; + struct via_isa_bridge *via_config; u8 t, v; unsigned int u; - int i; /* * Find the ISA bridge to see how good the IDE is. */ - - for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((isa = pci_find_device(PCI_VENDOR_ID_VIA + - !!(via_config->flags & VIA_BAD_ID), - via_config->id, NULL))) { - - pci_read_config_byte(isa, PCI_REVISION_ID, &t); - if (t >= via_config->rev_min && - t <= via_config->rev_max) - break; - } - + via_config = via_config_find(&isa); if (!via_config->id) { printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); return -ENODEV; } /* - * Check 80-wire cable presence and setup Clk66. + * Setup or disable Clk66 if appropriate */ - switch (via_config->flags & VIA_UDMA) { - - case VIA_UDMA_66: - /* Enable Clk66 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_100: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_133: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - } - - /* Disable Clk66 */ - if (via_config->flags & VIA_BAD_CLK66) { + if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { + /* Enable Clk66 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); + } else if (via_config->flags & VIA_BAD_CLK66) { /* Would cause trouble on 596a and 686 */ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); @@ -560,26 +360,78 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const via_dma[via_config->flags & VIA_UDMA], pci_name(dev)); - /* - * Setup /proc/ide/via entry. - */ + return 0; +} + +/* + * Check and handle 80-wire cable presence + */ +static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev) +{ + unsigned int u; + int i; + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + + switch (vdev->via_config->flags & VIA_UDMA) { + + case VIA_UDMA_66: + for (i = 24; i >= 0; i -= 8) + if (((u >> (i & 16)) & 8) && + ((u >> i) & 0x20) && + (((u >> i) & 7) < 2)) { + /* + * 2x PCI clock and + * UDMA w/ < 3T/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_100: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 4))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_133: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 6))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; -#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) - if (!via_proc) { - via_base = pci_resource_start(dev, 4); - bmide_dev = dev; - isa_dev = isa; - ide_pci_create_host_proc("via", via_get_info); - via_proc = 1; } -#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ - return 0; } static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) { + struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev), + GFP_KERNEL); + struct pci_dev *isa = NULL; int i; + if (vdev == NULL) { + printk(KERN_ERR "VP_IDE: out of memory :(\n"); + return; + } + + memset(vdev, 0, sizeof(struct via82cxxx_dev)); + ide_set_hwifdata(hwif, vdev); + + vdev->via_config = via_config_find(&isa); + via_cable_detect(hwif->pci_dev, vdev); + hwif->autodma = 0; hwif->tuneproc = &via82cxxx_tune_drive; @@ -594,7 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) for (i = 0; i < 2; i++) { hwif->drives[i].io_32bit = 1; - hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1; + hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1; hwif->drives[i].autotune = 1; hwif->drives[i].dn = hwif->channel * 2 + i; } @@ -608,7 +460,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->swdma_mask = 0x07; if (!hwif->udma_four) - hwif->udma_four = (via_80w >> hwif->channel) & 1; + hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1; hwif->ide_dma_check = &via82cxxx_ide_dma_check; if (!noautodma) hwif->autodma = 1; @@ -616,24 +468,35 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->drives[1].autodma = hwif->autodma; } -static ide_pci_device_t via82cxxx_chipset __devinitdata = { - .name = "VP_IDE", - .init_chipset = init_chipset_via82cxxx, - .init_hwif = init_hwif_via82cxxx, - .channels = 2, - .autodma = NOAUTODMA, - .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, - .bootable = ON_BOARD, +static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { + { /* 0 */ + .name = "VP_IDE", + .init_chipset = init_chipset_via82cxxx, + .init_hwif = init_hwif_via82cxxx, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, + .bootable = ON_BOARD + },{ /* 1 */ + .name = "VP_IDE", + .init_chipset = init_chipset_via82cxxx, + .init_hwif = init_hwif_via82cxxx, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, + .bootable = ON_BOARD, + } }; static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &via82cxxx_chipset); + return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); } static struct pci_device_id via_pci_tbl[] = { { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, via_pci_tbl); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 136911a..16b2835 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1401,20 +1401,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) /* We probe the hwif now */ probe_hwif_init(hwif); - /* The code IDE code will have set hwif->present if we have devices attached, - * if we don't, the discard the interface except if we are on a media bay slot - */ - if (!hwif->present && !pmif->mediabay) { - printk(KERN_INFO "ide%d: Bus empty, interface released.\n", - hwif->index); - default_hwif_iops(hwif); - for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i) - hwif->io_ports[i] = 0; - hwif->chipset = ide_unknown; - hwif->noprobe = 1; - return -ENODEV; - } - return 0; } diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index d4f2111..7ebf992 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -787,7 +787,7 @@ static int pre_init = 1; /* Before first ordered IDE scan */ static LIST_HEAD(ide_pci_drivers); /* - * __ide_register_pci_driver - attach IDE driver + * __ide_pci_register_driver - attach IDE driver * @driver: pci driver * @module: owner module of the driver * |
