diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/icside.c | 64 |
1 files changed, 4 insertions, 60 deletions
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index c5269fa..5af3d0f 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -65,8 +65,6 @@ static struct cardinfo icside_cardinfo_v6_2 = { }; struct icside_state { - unsigned int channel; - unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; unsigned int sel; @@ -116,18 +114,11 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) struct icside_state *state = ec->irq_data; void __iomem *base = state->irq_port; - state->enabled = 1; + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + readb(base + ICS_ARCIN_V6_INTROFFSET_2); - switch (state->channel) { - case 0: - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); - readb(base + ICS_ARCIN_V6_INTROFFSET_2); - break; - case 1: - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); - readb(base + ICS_ARCIN_V6_INTROFFSET_1); - break; - } + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); + readb(base + ICS_ARCIN_V6_INTROFFSET_1); } /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) @@ -137,8 +128,6 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; - state->enabled = 0; - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); } @@ -160,44 +149,6 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { .irqpending = icside_irqpending_arcin_v6, }; -/* - * Handle routing of interrupts. This is called before - * we write the command to the drive. - */ -static void icside_maskproc(ide_drive_t *drive, int mask) -{ - ide_hwif_t *hwif = drive->hwif; - struct expansion_card *ec = ECARD_DEV(hwif->dev); - struct icside_state *state = ecard_get_drvdata(ec); - unsigned long flags; - - local_irq_save(flags); - - state->channel = hwif->channel; - - if (state->enabled && !mask) { - switch (hwif->channel) { - case 0: - writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - break; - case 1: - writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - break; - } - } else { - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); - readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); - } - - local_irq_restore(flags); -} - -static const struct ide_port_ops icside_v6_no_dma_port_ops = { - .maskproc = icside_maskproc, -}; - #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. @@ -275,7 +226,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) static const struct ide_port_ops icside_v6_port_ops = { .set_dma_mode = icside_set_dma_mode, - .maskproc = icside_maskproc, }; static void icside_dma_host_set(ide_drive_t *drive, int on) @@ -320,11 +270,6 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) BUG_ON(dma_channel_active(ec->dma)); /* - * Ensure that we have the right interrupt routed. - */ - icside_maskproc(drive, 0); - - /* * Route the DMA signals to the correct interface. */ writeb(state->sel | hwif->channel, state->ioc_base); @@ -452,7 +397,6 @@ err_free: static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, - .port_ops = &icside_v6_no_dma_port_ops, .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, |
