diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/alim15x3.c | 12 | ||||
| -rw-r--r-- | drivers/ide/cmd64x.c | 17 | ||||
| -rw-r--r-- | drivers/ide/cy82c693.c | 27 | ||||
| -rw-r--r-- | drivers/ide/pdc202xx_old.c | 15 | ||||
| -rw-r--r-- | drivers/ide/sis5513.c | 9 | ||||
| -rw-r--r-- | drivers/ide/sl82c105.c | 24 |
6 files changed, 2 insertions, 102 deletions
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e59b6de..0abc43f 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -40,16 +40,6 @@ #define DRV_NAME "alim15x3" /* - * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking - * (this is DANGEROUS and could result in data corruption). - */ -static int wdc_udma; - -module_param(wdc_udma, bool, 0); -MODULE_PARM_DESC(wdc_udma, - "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)"); - -/* * ALi devices are not plug in. Otherwise these static values would * need to go. They ought to go away anyway */ @@ -132,7 +122,7 @@ static u8 ali_udma_filter(ide_drive_t *drive) if (m5229_revision > 0x20 && m5229_revision < 0xC2) { if (drive->media != ide_disk) return 0; - if (wdc_udma == 0 && chip_is_1543c_e && + if (chip_is_1543c_e && strstr((char *)&drive->id[ATA_ID_PROD], "WDC ")) return 0; } diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index ca0c46f..f2500c8 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c @@ -20,14 +20,6 @@ #define DRV_NAME "cmd64x" -#define CMD_DEBUG 0 - -#if CMD_DEBUG -#define cmdprintk(x...) printk(x) -#else -#define cmdprintk(x...) -#endif - /* * CMD64x specific registers definition. */ @@ -76,9 +68,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_ {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; - cmdprintk("program_cycle_times parameters: total=%d, active=%d\n", - cycle_time, active_time); - cycle_count = quantize_timing( cycle_time, clock_time); active_count = quantize_timing(active_time, clock_time); recovery_count = cycle_count - active_count; @@ -94,9 +83,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_ if (active_count > 16) /* shouldn't actually happen... */ active_count = 16; - cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n", - cycle_count, active_count, recovery_count); - /* * Convert values to internal chipset representation */ @@ -106,7 +92,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_ /* Program the active/recovery counts into the DRWTIM register */ drwtim = (active_count << 4) | recovery_count; (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); - cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]); } /* @@ -150,7 +135,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) if (setup_count > 5) /* shouldn't actually happen... */ setup_count = 5; - cmdprintk("Final address setup count: %d\n", setup_count); /* * Program the address setup clocks into the ARTTIM registers. @@ -162,7 +146,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) arttim &= ~0xc0; arttim |= setup_values[setup_count]; (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); - cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); } /* diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index 74fc540..d6e2cbb 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c @@ -51,11 +51,6 @@ #define DRV_NAME "cy82c693" /* - * The following are used to debug the driver. - */ -#define CY82C693_DEBUG_INFO 0 - -/* * NOTE: the value for busmaster timeout is tricky and I got it by * trial and error! By using a to low value will cause DMA timeouts * and drop IDE performance, and by using a to high value will cause @@ -176,11 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(index, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", - drive->name, hwif->channel, drive->dn & 1, mode & 3, single); -#endif /* CY82C693_DEBUG_INFO */ - /* * note: below we set the value for Bus Master IDE TimeOut Register * I'm not absolutly sure what this does, but it solved my problem @@ -194,11 +184,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) data = BUSMASTER_TIMEOUT; outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", - drive->name, data); -#endif /* CY82C693_DEBUG_INFO */ } static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -239,8 +224,6 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - - addrCtrl &= 0xF; } else { /* * set slave drive @@ -257,17 +240,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); - - addrCtrl >>= 4; - addrCtrl &= 0xF; } - -#if CY82C693_DEBUG_INFO - printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " - "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", - drive->name, hwif->channel, drive->dn & 1, - addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8); -#endif /* CY82C693_DEBUG_INFO */ } static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index cb812f3..35161dd 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -21,8 +21,6 @@ #define DRV_NAME "pdc202xx_old" -#define PDC202XX_DEBUG_DRIVE_INFO 0 - static void pdc_old_disable_66MHz_clock(ide_hwif_t *); static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) @@ -34,11 +32,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) u8 AP = 0, BP = 0, CP = 0; u8 TA = 0, TB = 0, TC = 0; -#if PDC202XX_DEBUG_DRIVE_INFO - u32 drive_conf = 0; - pci_read_config_dword(dev, drive_pci, &drive_conf); -#endif - /* * TODO: do this once per channel */ @@ -89,14 +82,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_byte(dev, drive_pci + 1, BP | TB); pci_write_config_byte(dev, drive_pci + 2, CP | TC); } - -#if PDC202XX_DEBUG_DRIVE_INFO - printk(KERN_DEBUG "%s: %s drive%d 0x%08x ", - drive->name, ide_xfer_verbose(speed), - drive->dn, drive_conf); - pci_read_config_dword(dev, drive_pci, &drive_conf); - printk("0x%08x\n", drive_conf); -#endif } static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index 3b88eba..4687060 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c @@ -632,12 +632,3 @@ module_exit(sis5513_ide_exit); MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik"); MODULE_DESCRIPTION("PCI driver module for SIS IDE"); MODULE_LICENSE("GPL"); - -/* - * TODO: - * - CLEANUP - * - More checks in the config registers (force values instead of - * relying on the BIOS setting them correctly). - * - Further optimisations ? - * . for example ATA66+ regs 0x48 & 0x4A - */ diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index d698da4..3c2bbf0 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c @@ -24,13 +24,6 @@ #define DRV_NAME "sl82c105" -#undef DEBUG - -#ifdef DEBUG -#define DBG(arg) printk arg -#else -#define DBG(fmt,...) -#endif /* * SL82C105 PCI config register 0x40 bits. */ @@ -104,9 +97,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) unsigned long timings = (unsigned long)ide_get_drivedata(drive); u16 drv_ctrl; - DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", - drive->name, ide_xfer_verbose(speed))); - drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; /* @@ -196,8 +186,6 @@ static void sl82c105_dma_start(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(hwif->dev); int reg = 0x44 + drive->dn * 4; - DBG(("%s(drive:%s)\n", __func__, drive->name)); - pci_write_config_word(dev, reg, (unsigned long)ide_get_drivedata(drive) >> 16); @@ -209,8 +197,6 @@ static void sl82c105_dma_clear(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - DBG(("sl82c105_dma_clear(drive:%s)\n", drive->name)); - sl82c105_reset_host(dev); } @@ -218,11 +204,7 @@ static int sl82c105_dma_end(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); int reg = 0x44 + drive->dn * 4; - int ret; - - DBG(("%s(drive:%s)\n", __func__, drive->name)); - - ret = ide_dma_end(drive); + int ret = ide_dma_end(drive); pci_write_config_word(dev, reg, (unsigned long)ide_get_drivedata(drive)); @@ -239,8 +221,6 @@ static void sl82c105_resetproc(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(drive->hwif->dev); u32 val; - DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); - pci_read_config_dword(dev, 0x40, &val); val |= (CTRL_P1F16 | CTRL_P0F16); pci_write_config_dword(dev, 0x40, val); @@ -291,8 +271,6 @@ static int init_chipset_sl82c105(struct pci_dev *dev) { u32 val; - DBG(("init_chipset_sl82c105()\n")); - pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); |
