diff options
Diffstat (limited to 'drivers/ide/ppc')
| -rw-r--r-- | drivers/ide/ppc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/ide/ppc/pmac.c | 1736 |
2 files changed, 0 insertions, 1738 deletions
diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile deleted file mode 100644 index 74e52ad..0000000 --- a/drivers/ide/ppc/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c deleted file mode 100644 index 2e19d62..0000000 --- a/drivers/ide/ppc/pmac.c +++ /dev/null @@ -1,1736 +0,0 @@ -/* - * Support for IDE interfaces on PowerMacs. - * - * These IDE interfaces are memory-mapped and have a DBDMA channel - * for doing DMA. - * - * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Some code taken from drivers/ide/ide-dma.c: - * - * Copyright (c) 1995-1998 Mark Lord - * - * TODO: - Use pre-calculated (kauai) timing tables all the time and - * get rid of the "rounded" tables used previously, so we have the - * same table format for all controllers and can then just have one - * big table - * - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/scatterlist.h> - -#include <asm/prom.h> -#include <asm/io.h> -#include <asm/dbdma.h> -#include <asm/ide.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/sections.h> -#include <asm/irq.h> - -#ifndef CONFIG_PPC64 -#include <asm/mediabay.h> -#endif - -#define DRV_NAME "ide-pmac" - -#undef IDE_PMAC_DEBUG - -#define DMA_WAIT_TIMEOUT 50 - -typedef struct pmac_ide_hwif { - unsigned long regbase; - int irq; - int kind; - int aapl_bus_id; - unsigned mediabay : 1; - unsigned broken_dma : 1; - unsigned broken_dma_warn : 1; - struct device_node* node; - struct macio_dev *mdev; - u32 timings[4]; - volatile u32 __iomem * *kauai_fcr; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* Those fields are duplicating what is in hwif. We currently - * can't use the hwif ones because of some assumptions that are - * beeing done by the generic code about the kind of dma controller - * and format of the dma table. This will have to be fixed though. - */ - volatile struct dbdma_regs __iomem * dma_regs; - struct dbdma_cmd* dma_table_cpu; -#endif - -} pmac_ide_hwif_t; - -enum { - controller_ohare, /* OHare based */ - controller_heathrow, /* Heathrow/Paddington */ - controller_kl_ata3, /* KeyLargo ATA-3 */ - controller_kl_ata4, /* KeyLargo ATA-4 */ - controller_un_ata6, /* UniNorth2 ATA-6 */ - controller_k2_ata6, /* K2 ATA-6 */ - controller_sh_ata6, /* Shasta ATA-6 */ -}; - -static const char* model_name[] = { - "OHare ATA", /* OHare based */ - "Heathrow ATA", /* Heathrow/Paddington */ - "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */ - "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */ - "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */ - "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */ - "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */ -}; - -/* - * Extra registers, both 32-bit little-endian - */ -#define IDE_TIMING_CONFIG 0x200 -#define IDE_INTERRUPT 0x300 - -/* Kauai (U2) ATA has different register setup */ -#define IDE_KAUAI_PIO_CONFIG 0x200 -#define IDE_KAUAI_ULTRA_CONFIG 0x210 -#define IDE_KAUAI_POLL_CONFIG 0x220 - -/* - * Timing configuration register definitions - */ - -/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */ -#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS) -#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS) -#define IDE_SYSCLK_NS 30 /* 33Mhz cell */ -#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */ - -/* 133Mhz cell, found in shasta. - * See comments about 100 Mhz Uninorth 2... - * Note that PIO_MASK and MDMA_MASK seem to overlap - */ -#define TR_133_PIOREG_PIO_MASK 0xff000fff -#define TR_133_PIOREG_MDMA_MASK 0x00fff800 -#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff -#define TR_133_UDMAREG_UDMA_EN 0x00000001 - -/* 100Mhz cell, found in Uninorth 2. I don't have much infos about - * this one yet, it appears as a pci device (106b/0033) on uninorth - * internal PCI bus and it's clock is controlled like gem or fw. It - * appears to be an evolution of keylargo ATA4 with a timing register - * extended to 2 32bits registers and a similar DBDMA channel. Other - * registers seem to exist but I can't tell much about them. - * - * So far, I'm using pre-calculated tables for this extracted from - * the values used by the MacOS X driver. - * - * The "PIO" register controls PIO and MDMA timings, the "ULTRA" - * register controls the UDMA timings. At least, it seems bit 0 - * of this one enables UDMA vs. MDMA, and bits 4..7 are the - * cycle time in units of 10ns. Bits 8..15 are used by I don't - * know their meaning yet - */ -#define TR_100_PIOREG_PIO_MASK 0xff000fff -#define TR_100_PIOREG_MDMA_MASK 0x00fff000 -#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff -#define TR_100_UDMAREG_UDMA_EN 0x00000001 - - -/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on - * 40 connector cable and to 4 on 80 connector one. - * Clock unit is 15ns (66Mhz) - * - * 3 Values can be programmed: - * - Write data setup, which appears to match the cycle time. They - * also call it DIOW setup. - * - Ready to pause time (from spec) - * - Address setup. That one is weird. I don't see where exactly - * it fits in UDMA cycles, I got it's name from an obscure piece - * of commented out code in Darwin. They leave it to 0, we do as - * well, despite a comment that would lead to think it has a - * min value of 45ns. - * Apple also add 60ns to the write data setup (or cycle time ?) on - * reads. - */ -#define TR_66_UDMA_MASK 0xfff00000 -#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */ -#define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */ -#define TR_66_UDMA_ADDRSETUP_SHIFT 29 -#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */ -#define TR_66_UDMA_RDY2PAUS_SHIFT 25 -#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */ -#define TR_66_UDMA_WRDATASETUP_SHIFT 21 -#define TR_66_MDMA_MASK 0x000ffc00 -#define TR_66_MDMA_RECOVERY_MASK 0x000f8000 -#define TR_66_MDMA_RECOVERY_SHIFT 15 -#define TR_66_MDMA_ACCESS_MASK 0x00007c00 -#define TR_66_MDMA_ACCESS_SHIFT 10 -#define TR_66_PIO_MASK 0x000003ff -#define TR_66_PIO_RECOVERY_MASK 0x000003e0 -#define TR_66_PIO_RECOVERY_SHIFT 5 -#define TR_66_PIO_ACCESS_MASK 0x0000001f -#define TR_66_PIO_ACCESS_SHIFT 0 - -/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo - * Can do pio & mdma modes, clock unit is 30ns (33Mhz) - * - * The access time and recovery time can be programmed. Some older - * Darwin code base limit OHare to 150ns cycle time. I decided to do - * the same here fore safety against broken old hardware ;) - * The HalfTick bit, when set, adds half a clock (15ns) to the access - * time and removes one from recovery. It's not supported on KeyLargo - * implementation afaik. The E bit appears to be set for PIO mode 0 and - * is used to reach long timings used in this mode. - */ -#define TR_33_MDMA_MASK 0x003ff800 -#define TR_33_MDMA_RECOVERY_MASK 0x001f0000 -#define TR_33_MDMA_RECOVERY_SHIFT 16 -#define TR_33_MDMA_ACCESS_MASK 0x0000f800 -#define TR_33_MDMA_ACCESS_SHIFT 11 -#define TR_33_MDMA_HALFTICK 0x00200000 -#define TR_33_PIO_MASK 0x000007ff -#define TR_33_PIO_E 0x00000400 -#define TR_33_PIO_RECOVERY_MASK 0x000003e0 -#define TR_33_PIO_RECOVERY_SHIFT 5 -#define TR_33_PIO_ACCESS_MASK 0x0000001f -#define TR_33_PIO_ACCESS_SHIFT 0 - -/* - * Interrupt register definitions - */ -#define IDE_INTR_DMA 0x80000000 -#define IDE_INTR_DEVICE 0x40000000 - -/* - * FCR Register on Kauai. Not sure what bit 0x4 is ... - */ -#define KAUAI_FCR_UATA_MAGIC 0x00000004 -#define KAUAI_FCR_UATA_RESET_N 0x00000002 -#define KAUAI_FCR_UATA_ENABLE 0x00000001 - -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - -/* Rounded Multiword DMA timings - * - * I gave up finding a generic formula for all controller - * types and instead, built tables based on timing values - * used by Apple in Darwin's implementation. - */ -struct mdma_timings_t { - int accessTime; - int recoveryTime; - int cycleTime; -}; - -struct mdma_timings_t mdma_timings_33[] = -{ - { 240, 240, 480 }, - { 180, 180, 360 }, - { 135, 135, 270 }, - { 120, 120, 240 }, - { 105, 105, 210 }, - { 90, 90, 180 }, - { 75, 75, 150 }, - { 75, 45, 120 }, - { 0, 0, 0 } -}; - -struct mdma_timings_t mdma_timings_33k[] = -{ - { 240, 240, 480 }, - { 180, 180, 360 }, - { 150, 150, 300 }, - { 120, 120, 240 }, - { 90, 120, 210 }, - { 90, 90, 180 }, - { 90, 60, 150 }, - { 90, 30, 120 }, - { 0, 0, 0 } -}; - -struct mdma_timings_t mdma_timings_66[] = -{ - { 240, 240, 480 }, - { 180, 180, 360 }, - { 135, 135, 270 }, - { 120, 120, 240 }, - { 105, 105, 210 }, - { 90, 90, 180 }, - { 90, 75, 165 }, - { 75, 45, 120 }, - { 0, 0, 0 } -}; - -/* KeyLargo ATA-4 Ultra DMA timings (rounded) */ -struct { - int addrSetup; /* ??? */ - int rdy2pause; - int wrDataSetup; -} kl66_udma_timings[] = -{ - { 0, 180, 120 }, /* Mode 0 */ - { 0, 150, 90 }, /* 1 */ - { 0, 120, 60 }, /* 2 */ - { 0, 90, 45 }, /* 3 */ - { 0, 90, 30 } /* 4 */ -}; - -/* UniNorth 2 ATA/100 timings */ -struct kauai_timing { - int cycle_time; - u32 timing_reg; -}; - -static struct kauai_timing kauai_pio_timings[] = -{ - { 930 , 0x08000fff }, - { 600 , 0x08000a92 }, - { 383 , 0x0800060f }, - { 360 , 0x08000492 }, - { 330 , 0x0800048f }, - { 300 , 0x080003cf }, - { 270 , 0x080003cc }, - { 240 , 0x0800038b }, - { 239 , 0x0800030c }, - { 180 , 0x05000249 }, - { 120 , 0x04000148 }, - { 0 , 0 }, -}; - -static struct kauai_timing kauai_mdma_timings[] = -{ - { 1260 , 0x00fff000 }, - { 480 , 0x00618000 }, - { 360 , 0x00492000 }, - { 270 , 0x0038e000 }, - { 240 , 0x0030c000 }, - { 210 , 0x002cb000 }, - { 180 , 0x00249000 }, - { 150 , 0x00209000 }, - { 120 , 0x00148000 }, - { 0 , 0 }, -}; - -static struct kauai_timing kauai_udma_timings[] = -{ - { 120 , 0x000070c0 }, - { 90 , 0x00005d80 }, - { 60 , 0x00004a60 }, - { 45 , 0x00003a50 }, - { 30 , 0x00002a30 }, - { 20 , 0x00002921 }, - { 0 , 0 }, -}; - -static struct kauai_timing shasta_pio_timings[] = -{ - { 930 , 0x08000fff }, - { 600 , 0x0A000c97 }, - { 383 , 0x07000712 }, - { 360 , 0x040003cd }, - { 330 , 0x040003cd }, - { 300 , 0x040003cd }, - { 270 , 0x040003cd }, - { 240 , 0x040003cd }, - { 239 , 0x040003cd }, - { 180 , 0x0400028b }, - { 120 , 0x0400010a }, - { 0 , 0 }, -}; - -static struct kauai_timing shasta_mdma_timings[] = -{ - { 1260 , 0x00fff000 }, - { 480 , 0x00820800 }, - { 360 , 0x00820800 }, - { 270 , 0x00820800 }, - { 240 , 0x00820800 }, - { 210 , 0x00820800 }, - { 180 , 0x00820800 }, - { 150 , 0x0028b000 }, - { 120 , 0x001ca000 }, - { 0 , 0 }, -}; - -static struct kauai_timing shasta_udma133_timings[] = -{ - { 120 , 0x00035901, }, - { 90 , 0x000348b1, }, - { 60 , 0x00033881, }, - { 45 , 0x00033861, }, - { 30 , 0x00033841, }, - { 20 , 0x00033031, }, - { 15 , 0x00033021, }, - { 0 , 0 }, -}; - - -static inline u32 -kauai_lookup_timing(struct kauai_timing* table, int cycle_time) -{ - int i; - - for (i=0; table[i].cycle_time; i++) - if (cycle_time > table[i+1].cycle_time) - return table[i].timing_reg; - BUG(); - return 0; -} - -/* allow up to 256 DBDMA commands per xfer */ -#define MAX_DCMDS 256 - -/* - * Wait 1s for disk to answer on IDE bus after a hard reset - * of the device (via GPIO/FCR). - * - * Some devices seem to "pollute" the bus even after dropping - * the BSY bit (typically some combo drives slave on the UDMA - * bus) after a hard reset. Since we hard reset all drives on - * KeyLargo ATA66, we have to keep that delay around. I may end - * up not hard resetting anymore on these and keep the delay only - * for older interfaces instead (we have to reset when coming - * from MacOS...) --BenH. - */ -#define IDE_WAKEUP_DELAY (1*HZ) - -static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); -static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); -static void pmac_ide_selectproc(ide_drive_t *drive); -static void pmac_ide_kauai_selectproc(ide_drive_t *drive); - -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - -#define PMAC_IDE_REG(x) \ - ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) - -/* - * Apply the timings of the proper unit (master/slave) to the shared - * timing register when selecting that unit. This version is for - * ASICs with a single timing register - */ -static void -pmac_ide_selectproc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - - if (drive->dn & 1) - writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); - else - writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG)); - (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); -} - -/* - * Apply the timings of the proper unit (master/slave) to the shared - * timing register when selecting that unit. This version is for - * ASICs with a dual timing register (Kauai) - */ -static void -pmac_ide_kauai_selectproc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - - if (drive->dn & 1) { - writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); - writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG)); - } else { - writel(pmif->timings[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); - writel(pmif->timings[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG)); - } - (void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); -} - -/* - * Force an update of controller timing values for a given drive - */ -static void -pmac_ide_do_update_timings(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - - if (pmif->kind == controller_sh_ata6 || - pmif->kind == controller_un_ata6 || - pmif->kind == controller_k2_ata6) - pmac_ide_kauai_selectproc(drive); - else - pmac_ide_selectproc(drive); -} - -static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); - (void)readl((void __iomem *)(hwif->io_ports.data_addr - + IDE_TIMING_CONFIG)); -} - -static void pmac_set_irq(ide_hwif_t *hwif, int on) -{ - u8 ctl = ATA_DEVCTL_OBS; - - if (on == 4) { /* hack for SRST */ - ctl |= 4; - on &= ~4; - } - - ctl |= on ? 0 : 2; - - writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); - (void)readl((void __iomem *)(hwif->io_ports.data_addr - + IDE_TIMING_CONFIG)); -} - -/* - * Old tuning functions (called on hdparm -p), sets up drive PIO timings - */ -static void -pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); - u32 *timings, t; - unsigned accessTicks, recTicks; - unsigned accessTime, recTime; - unsigned int cycle_time; - - /* which drive is it ? */ - timings = &pmif->timings[drive->dn & 1]; - t = *timings; - - cycle_time = ide_pio_cycle_time(drive, pio); - - switch (pmif->kind) { - case controller_sh_ata6: { - /* 133Mhz cell */ - u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time); - t = (t & ~TR_133_PIOREG_PIO_MASK) | tr; - break; - } - case controller_un_ata6: - case controller_k2_ata6: { - /* 100Mhz cell */ - u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time); - t = (t & ~TR_100_PIOREG_PIO_MASK) | tr; - break; - } - case controller_kl_ata4: - /* 66Mhz cell */ - recTime = cycle_time - tim->active - tim->setup; - recTime = max(recTime, 150U); - accessTime = tim->active; - accessTime = max(accessTime, 150U); - accessTicks = SYSCLK_TICKS_66(accessTime); - accessTicks = min(accessTicks, 0x1fU); - recTicks = SYSCLK_TICKS_66(recTime); - recTicks = min(recTicks, 0x1fU); - t = (t & ~TR_66_PIO_MASK) | - (accessTicks << TR_66_PIO_ACCESS_SHIFT) | - (recTicks << TR_66_PIO_RECOVERY_SHIFT); - break; - default: { - /* 33Mhz cell */ - int ebit = 0; - recTime = cycle_time - tim->active - tim->setup; - recTime = max(recTime, 150U); - accessTime = tim->active; - accessTime = max(accessTime, 150U); - accessTicks = SYSCLK_TICKS(accessTime); - accessTicks = min(accessTicks, 0x1fU); - accessTicks = max(accessTicks, 4U); - recTicks = SYSCLK_TICKS(recTime); - recTicks = min(recTicks, 0x1fU); - recTicks = max(recTicks, 5U) - 4; - if (recTicks > 9) { - recTicks--; /* guess, but it's only for PIO0, so... */ - ebit = 1; - } - t = (t & ~TR_33_PIO_MASK) | - (accessTicks << TR_33_PIO_ACCESS_SHIFT) | - (recTicks << TR_33_PIO_RECOVERY_SHIFT); - if (ebit) - t |= TR_33_PIO_E; - break; - } - } - -#ifdef IDE_PMAC_DEBUG - printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n", - drive->name, pio, *timings); -#endif - - *timings = t; - pmac_ide_do_update_timings(drive); -} - -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - -/* - * Calculate KeyLargo ATA/66 UDMA timings - */ -static int -set_timings_udma_ata4(u32 *timings, u8 speed) -{ - unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks; - - if (speed > XFER_UDMA_4) - return 1; - - rdyToPauseTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].rdy2pause); - wrDataSetupTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].wrDataSetup); - addrTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].addrSetup); - - *timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) | - (wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) | - (rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) | - (addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) | - TR_66_UDMA_EN; -#ifdef IDE_PMAC_DEBUG - printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n", - speed & 0xf, *timings); -#endif - - return 0; -} - -/* - * Calculate Kauai ATA/100 UDMA timings - */ -static int -set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed) -{ - struct ide_timing *t = ide_timing_find_mode(speed); - u32 tr; - - if (speed > XFER_UDMA_5 || t == NULL) - return 1; - tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma); - *ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr; - *ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN; - - return 0; -} - -/* - * Calculate Shasta ATA/133 UDMA timings - */ -static int -set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed) -{ - struct ide_timing *t = ide_timing_find_mode(speed); - u32 tr; - - if (speed > XFER_UDMA_6 || t == NULL) - return 1; - tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma); - *ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr; - *ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN; - - return 0; -} - -/* - * Calculate MDMA timings for all cells - */ -static void -set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, - u8 speed) -{ - u16 *id = drive->id; - int cycleTime, accessTime = 0, recTime = 0; - unsigned accessTicks, recTicks; - struct mdma_timings_t* tm = NULL; - int i; - - /* Get default cycle time for mode */ - switch(speed & 0xf) { - case 0: cycleTime = 480; break; - case 1: cycleTime = 150; break; - case 2: cycleTime = 120; break; - default: - BUG(); - break; - } - - /* Check if drive provides explicit DMA cycle time */ - if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME]) - cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime); - - /* OHare limits according to some old Apple sources */ - if ((intf_type == controller_ohare) && (cycleTime < 150)) - cycleTime = 150; - /* Get the proper timing array for this controller */ - switch(intf_type) { - case controller_sh_ata6: - case controller_un_ata6: - case controller_k2_ata6: - break; - case controller_kl_ata4: - tm = mdma_timings_66; - break; - case controller_kl_ata3: - tm = mdma_timings_33k; - break; - default: - tm = mdma_timings_33; - break; - } - if (tm != NULL) { - /* Lookup matching access & recovery times */ - i = -1; - for (;;) { - if (tm[i+1].cycleTime < cycleTime) - break; - i++; - } - cycleTime = tm[i].cycleTime; - accessTime = tm[i].accessTime; - recTime = tm[i].recoveryTime; - -#ifdef IDE_PMAC_DEBUG - printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n", - drive->name, cycleTime, accessTime, recTime); -#endif - } - switch(intf_type) { - case controller_sh_ata6: { - /* 133Mhz cell */ - u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime); - *timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr; - *timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN; - } - case controller_un_ata6: - case controller_k2_ata6: { - /* 100Mhz cell */ - u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime); - *timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr; - *timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN; - } - break; - case controller_kl_ata4: - /* 66Mhz cell */ - accessTicks = SYSCLK_TICKS_66(accessTime); - accessTicks = min(accessTicks, 0x1fU); - accessTicks = max(accessTicks, 0x1U); - recTicks = SYSCLK_TICKS_66(recTime); - recTicks = min(recTicks, 0x1fU); - recTicks = max(recTicks, 0x3U); - /* Clear out mdma bits and disable udma */ - *timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) | - (accessTicks << TR_66_MDMA_ACCESS_SHIFT) | - (recTicks << TR_66_MDMA_RECOVERY_SHIFT); - break; - case controller_kl_ata3: - /* 33Mhz cell on KeyLargo */ - accessTicks = SYSCLK_TICKS(accessTime); - accessTicks = max(accessTicks, 1U); - accessTicks = min(accessTicks, 0x1fU); - accessTime = accessTicks * IDE_SYSCLK_NS; - recTicks = SYSCLK_TICKS(recTime); - recTicks = max(recTicks, 1U); - recTicks = min(recTicks, 0x1fU); - *timings = ((*timings) & ~TR_33_MDMA_MASK) | - (accessTicks << TR_33_MDMA_ACCESS_SHIFT) | - (recTicks << TR_33_MDMA_RECOVERY_SHIFT); - break; - default: { - /* 33Mhz cell on others */ - int halfTick = 0; - int origAccessTime = accessTime; - int origRecTime = recTime; - - accessTicks = SYSCLK_TICKS(accessTime); - accessTicks = max(accessTicks, 1U); - accessTicks = min(accessTicks, 0x1fU); - accessTime = accessTicks * IDE_SYSCLK_NS; - recTicks = SYSCLK_TICKS(recTime); - recTicks = max(recTicks, 2U) - 1; - recTicks = min(recTicks, 0x1fU); - recTime = (recTicks + 1) * IDE_SYSCLK_NS; - if ((accessTicks > 1) && - ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) && - ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) { - halfTick = 1; - accessTicks--; - } - *timings = ((*timings) & ~TR_33_MDMA_MASK) | - (accessTicks << TR_33_MDMA_ACCESS_SHIFT) | - (recTicks << TR_33_MDMA_RECOVERY_SHIFT); - if (halfTick) - *timings |= TR_33_MDMA_HALFTICK; - } - } -#ifdef IDE_PMAC_DEBUG - printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n", - drive->name, speed & 0xf, *timings); -#endif -} -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ - -static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - int ret = 0; - u32 *timings, *timings2, tl[2]; - u8 unit = drive->dn & 1; - - timings = &pmif->timings[unit]; - timings2 = &pmif->timings[unit+2]; - - /* Copy timings to local image */ - tl[0] = *timings; - tl[1] = *timings2; - -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (speed >= XFER_UDMA_0) { - if (pmif->kind == controller_kl_ata4) - ret = set_timings_udma_ata4(&tl[0], speed); - else if (pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6) - ret = set_timings_udma_ata6(&tl[0], &tl[1], speed); - else if (pmif->kind == controller_sh_ata6) - ret = set_timings_udma_shasta(&tl[0], &tl[1], speed); - else - ret = -1; - } else - set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - if (ret) - return; - - /* Apply timings to controller */ - *timings = tl[0]; - *timings2 = tl[1]; - - pmac_ide_do_update_timings(drive); -} - -/* - * Blast some well known "safe" values to the timing registers at init or - * wakeup from sleep time, before we do real calculation - */ -static void -sanitize_timings(pmac_ide_hwif_t *pmif) -{ - unsigned int value, value2 = 0; - - switch(pmif->kind) { - case controller_sh_ata6: - value = 0x0a820c97; - value2 = 0x00033031; - break; - case controller_un_ata6: - case controller_k2_ata6: - value = 0x08618a92; - value2 = 0x00002921; - break; - case controller_kl_ata4: - value = 0x0008438c; - break; - case controller_kl_ata3: - value = 0x00084526; - break; - case controller_heathrow: - case controller_ohare: - default: - value = 0x00074526; - break; - } - pmif->timings[0] = pmif->timings[1] = value; - pmif->timings[2] = pmif->timings[3] = value2; -} - -/* Suspend call back, should be called after the child devices - * have actually been suspended - */ -static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) -{ - /* We clear the timings */ - pmif->timings[0] = 0; - pmif->timings[1] = 0; - - disable_irq(pmif->irq); - - /* The media bay will handle itself just fine */ - if (pmif->mediabay) - return 0; - - /* Kauai has bus control FCRs directly here */ - if (pmif->kauai_fcr) { - u32 fcr = readl(pmif->kauai_fcr); - fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE); - writel(fcr, pmif->kauai_fcr); - } - - /* Disable the bus on older machines and the cell on kauai */ - ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, - 0); - - return 0; -} - -/* Resume call back, should be called before the child devices - * are resumed - */ -static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) -{ - /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ - if (!pmif->mediabay) { - ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); - ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); - msleep(10); - ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0); - - /* Kauai has it different */ - if (pmif->kauai_fcr) { - u32 fcr = readl(pmif->kauai_fcr); - fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE; - writel(fcr, pmif->kauai_fcr); - } - - msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); - } - - /* Sanitize drive timings */ - sanitize_timings(pmif); - - enable_irq(pmif->irq); - - return 0; -} - -static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) -{ - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct device_node *np = pmif->node; - const char *cable = of_get_property(np, "cable-type", NULL); - - /* Get cable type from device-tree. */ - if (cable && !strncmp(cable, "80-", 3)) - return ATA_CBL_PATA80; - - /* - * G5's seem to have incorrect cable type in device-tree. - * Let's assume they have a 80 conductor cable, this seem - * to be always the case unless the user mucked around. - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - return ATA_CBL_PATA80; - - return ATA_CBL_PATA40; -} - -static void pmac_ide_init_dev(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { - drive->dev_flags &= ~IDE_DFLAG_NOPROBE; - return; - } -#endif - drive->dev_flags |= IDE_DFLAG_NOPROBE; - } -} - -static const struct ide_tp_ops pmac_tp_ops = { - .exec_command = pmac_exec_command, - .read_status = ide_read_status, - .read_altstatus = ide_read_altstatus, - .read_sff_dma_status = ide_read_sff_dma_status, - - .set_irq = pmac_set_irq, - - .tf_load = ide_tf_load, - .tf_read = ide_tf_read, - - .input_data = ide_input_data, - .output_data = ide_output_data, -}; - -static const struct ide_port_ops pmac_ide_ata6_port_ops = { - .init_dev = pmac_ide_init_dev, - .set_pio_mode = pmac_ide_set_pio_mode, - .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_kauai_selectproc, - .cable_detect = pmac_ide_cable_detect, -}; - -static const struct ide_port_ops pmac_ide_ata4_port_ops = { - .init_dev = pmac_ide_init_dev, - .set_pio_mode = pmac_ide_set_pio_mode, - .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, - .cable_detect = pmac_ide_cable_detect, -}; - -static const struct ide_port_ops pmac_ide_port_ops = { - .init_dev = pmac_ide_init_dev, - .set_pio_mode = pmac_ide_set_pio_mode, - .set_dma_mode = pmac_ide_set_dma_mode, - .selectproc = pmac_ide_selectproc, -}; - -static const struct ide_dma_ops pmac_dma_ops; - -static const struct ide_port_info pmac_port_info = { - .name = DRV_NAME, - .init_dma = pmac_ide_init_dma, - .chipset = ide_pmac, - .tp_ops = &pmac_tp_ops, - .port_ops = &pmac_ide_port_ops, -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - .dma_ops = &pmac_dma_ops, -#endif - .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_MMIO | - IDE_HFLAG_UNMASK_IRQS, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, -}; - -/* - * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). - */ -static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) -{ - struct device_node *np = pmif->node; - const int *bidp; - struct ide_host *host; - ide_hwif_t *hwif; - hw_regs_t *hws[] = { hw, NULL, NULL, NULL }; - struct ide_port_info d = pmac_port_info; - int rc; - - pmif->broken_dma = pmif->broken_dma_warn = 0; - if (of_device_is_compatible(np, "shasta-ata")) { - pmif->kind = controller_sh_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; - d.udma_mask = ATA_UDMA6; - } else if (of_device_is_compatible(np, "kauai-ata")) { - pmif->kind = controller_un_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; - d.udma_mask = ATA_UDMA5; - } else if (of_device_is_compatible(np, "K2-UATA")) { - pmif->kind = controller_k2_ata6; - d.port_ops = &pmac_ide_ata6_port_ops; - d.udma_mask = ATA_UDMA5; - } else if (of_device_is_compatible(np, "keylargo-ata")) { - if (strcmp(np->name, "ata-4") == 0) { - pmif->kind = controller_kl_ata4; - d.port_ops = &pmac_ide_ata4_port_ops; - d.udma_mask = ATA_UDMA4; - } else - pmif->kind = controller_kl_ata3; - } else if (of_device_is_compatible(np, "heathrow-ata")) { - pmif->kind = controller_heathrow; - } else { - pmif->kind = controller_ohare; - pmif->broken_dma = 1; - } - - bidp = of_get_property(np, "AAPL,bus-id", NULL); - pmif->aapl_bus_id = bidp ? *bidp : 0; - - /* On Kauai-type controllers, we make sure the FCR is correct */ - if (pmif->kauai_fcr) - writel(KAUAI_FCR_UATA_MAGIC | - KAUAI_FCR_UATA_RESET_N | - KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); - - pmif->mediabay = 0; - - /* Make sure we have sane timings */ - sanitize_timings(pmif); - - host = ide_host_alloc(&d, hws); - if (host == NULL) - return -ENOMEM; - hwif = host->ports[0]; - -#ifndef CONFIG_PPC64 - /* XXX FIXME: Media bay stuff need re-organizing */ - if (np->parent && np->parent->name - && strcasecmp(np->parent->name, "media-bay") == 0) { -#ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, - hwif); -#endif /* CONFIG_PMAC_MEDIABAY */ - pmif->mediabay = 1; - if (!bidp) - pmif->aapl_bus_id = 1; - } else if (pmif->kind == controller_ohare) { - /* The code below is having trouble on some ohare machines - * (timing related ?). Until I can put my hand on one of these - * units, I keep the old way - */ - ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); - } else -#endif - { - /* This is necessary to enable IDE when net-booting */ - ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); - ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); - msleep(10); - ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0); - msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); - } - - printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " - "bus ID %d%s, irq %d\n", model_name[pmif->kind], - pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hw->irq); - - rc = ide_host_register(host, &d, hws); - if (rc) { - ide_host_free(host); - return rc; - } - - return 0; -} - -static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) -{ - int i; - - for (i = 0; i < 8; ++i) - hw->io_ports_array[i] = base + i * 0x10; - - hw->io_ports.ctl_addr = base + 0x160; -} - -/* - * Attach to a macio probed interface - */ -static int __devinit -pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) -{ - void __iomem *base; - unsigned long regbase; - pmac_ide_hwif_t *pmif; - int irq, rc; - hw_regs_t hw; - - pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); - if (pmif == NULL) - return -ENOMEM; - - if (macio_resource_count(mdev) == 0) { - printk(KERN_WARNING "ide-pmac: no address for %s\n", - mdev->ofdev.node->full_name); - rc = -ENXIO; - goto out_free_pmif; - } - - /* Request memory resource for IO ports */ - if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { - printk(KERN_ERR "ide-pmac: can't request MMIO resource for " - "%s!\n", mdev->ofdev.node->full_name); - rc = -EBUSY; - goto out_free_pmif; - } - - /* XXX This is bogus. Should be fixed in the registry by checking - * the kind of host interrupt controller, a bit like gatwick - * fixes in irq.c. That works well enough for the single case - * where that happens though... - */ - if (macio_irq_count(mdev) == 0) { - printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " - "13\n", mdev->ofdev.node->full_name); - irq = irq_create_mapping(NULL, 13); - } else - irq = macio_irq(mdev, 0); - - base = ioremap(macio_resource_start(mdev, 0), 0x400); - regbase = (unsigned long) base; - - pmif->mdev = mdev; - pmif->node = mdev->ofdev.node; - pmif->regbase = regbase; - pmif->irq = irq; - pmif->kauai_fcr = NULL; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (macio_resource_count(mdev) >= 2) { - if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) - printk(KERN_WARNING "ide-pmac: can't request DMA " - "resource for %s!\n", - mdev->ofdev.node->full_name); - else - pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); - } else - pmif->dma_regs = NULL; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - dev_set_drvdata(&mdev->ofdev.dev, pmif); - - memset(&hw, 0, sizeof(hw)); - pmac_ide_init_ports(&hw, pmif->regbase); - hw.irq = irq; - hw.dev = &mdev->bus->pdev->dev; - hw.parent = &mdev->ofdev.dev; - - rc = pmac_ide_setup_device(pmif, &hw); - if (rc != 0) { - /* The inteface is released to the common IDE layer */ - dev_set_drvdata(&mdev->ofdev.dev, NULL); - iounmap(base); - if (pmif->dma_regs) { - iounmap(pmif->dma_regs); - macio_release_resource(mdev, 1); - } - macio_release_resource(mdev, 0); - kfree(pmif); - } - - return rc; - -out_free_pmif: - kfree(pmif); - return rc; -} - -static int -pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) -{ - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); - int rc = 0; - - if (mesg.event != mdev->ofdev.dev.power.power_state.event - && (mesg.event & PM_EVENT_SLEEP)) { - rc = pmac_ide_do_suspend(pmif); - if (rc == 0) - mdev->ofdev.dev.power.power_state = mesg; - } - - return rc; -} - -static int -pmac_ide_macio_resume(struct macio_dev *mdev) -{ - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); - int rc = 0; - - if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { - rc = pmac_ide_do_resume(pmif); - if (rc == 0) - mdev->ofdev.dev.power.power_state = PMSG_ON; - } - - return rc; -} - -/* - * Attach to a PCI probed interface - */ -static int __devinit -pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct device_node *np; - pmac_ide_hwif_t *pmif; - void __iomem *base; - unsigned long rbase, rlen; - int rc; - hw_regs_t hw; - - np = pci_device_to_OF_node(pdev); - if (np == NULL) { - printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n"); - return -ENODEV; - } - - pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); - if (pmif == NULL) - return -ENOMEM; - - if (pci_enable_device(pdev)) { - printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " - "%s\n", np->full_name); - rc = -ENXIO; - goto out_free_pmif; - } - pci_set_master(pdev); - - if (pci_request_regions(pdev, "Kauai ATA")) { - printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for " - "%s\n", np->full_name); - rc = -ENXIO; - goto out_free_pmif; - } - - pmif->mdev = NULL; - pmif->node = np; - - rbase = pci_resource_start(pdev, 0); - rlen = pci_resource_len(pdev, 0); - - base = ioremap(rbase, rlen); - pmif->regbase = (unsigned long) base + 0x2000; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - pmif->dma_regs = base + 0x1000; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - pmif->kauai_fcr = base; - pmif->irq = pdev->irq; - - pci_set_drvdata(pdev, pmif); - - memset(&hw, 0, sizeof(hw)); - pmac_ide_init_ports(&hw, pmif->regbase); - hw.irq = pdev->irq; - hw.dev = &pdev->dev; - - rc = pmac_ide_setup_device(pmif, &hw); - if (rc != 0) { - /* The inteface is released to the common IDE layer */ - pci_set_drvdata(pdev, NULL); - iounmap(base); - pci_release_regions(pdev); - kfree(pmif); - } - - return rc; - -out_free_pmif: - kfree(pmif); - return rc; -} - -static int -pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) -{ - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); - int rc = 0; - - if (mesg.event != pdev->dev.power.power_state.event - && (mesg.event & PM_EVENT_SLEEP)) { - rc = pmac_ide_do_suspend(pmif); - if (rc == 0) - pdev->dev.power.power_state = mesg; - } - - return rc; -} - -static int -pmac_ide_pci_resume(struct pci_dev *pdev) -{ - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); - int rc = 0; - - if (pdev->dev.power.power_state.event != PM_EVENT_ON) { - rc = pmac_ide_do_resume(pmif); - if (rc == 0) - pdev->dev.power.power_state = PMSG_ON; - } - - return rc; -} - -static struct of_device_id pmac_ide_macio_match[] = -{ - { - .name = "IDE", - }, - { - .name = "ATA", - }, - { - .type = "ide", - }, - { - .type = "ata", - }, - {}, -}; - -static struct macio_driver pmac_ide_macio_driver = -{ - .name = "ide-pmac", - .match_table = pmac_ide_macio_match, - .probe = pmac_ide_macio_attach, - .suspend = pmac_ide_macio_suspend, - .resume = pmac_ide_macio_resume, -}; - -static const struct pci_device_id pmac_ide_pci_match[] = { - { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 }, - { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 }, - { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 }, - { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 }, - { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 }, - {}, -}; - -static struct pci_driver pmac_ide_pci_driver = { - .name = "ide-pmac", - .id_table = pmac_ide_pci_match, - .probe = pmac_ide_pci_attach, - .suspend = pmac_ide_pci_suspend, - .resume = pmac_ide_pci_resume, -}; -MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match); - -int __init pmac_ide_probe(void) -{ - int error; - - if (!machine_is(powermac)) - return -ENODEV; - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST - error = pci_register_driver(&pmac_ide_pci_driver); - if (error) - goto out; - error = macio_register_driver(&pmac_ide_macio_driver); - if (error) { - pci_unregister_driver(&pmac_ide_pci_driver); - goto out; - } -#else - error = macio_register_driver(&pmac_ide_macio_driver); - if (error) - goto out; - error = pci_register_driver(&pmac_ide_pci_driver); - if (error) { - macio_unregister_driver(&pmac_ide_macio_driver); - goto out; - } -#endif -out: - return error; -} - -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - -/* - * pmac_ide_build_dmatable builds the DBDMA command list - * for a transfer and sets the DBDMA channel to point to it. - */ -static int -pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct dbdma_cmd *table; - int i, count = 0; - volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; - struct scatterlist *sg; - int wr = (rq_data_dir(rq) == WRITE); - - /* DMA table is already aligned */ - table = (struct dbdma_cmd *) pmif->dma_table_cpu; - - /* Make sure DMA controller is stopped (necessary ?) */ - writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma->control); - while (readl(&dma->status) & RUN) - udelay(1); - - hwif->sg_nents = i = ide_build_sglist(drive, rq); - - if (!i) - return 0; - - /* Build DBDMA commands list */ - sg = hwif->sg_table; - while (i && sg_dma_len(sg)) { - u32 cur_addr; - u32 cur_len; - - cur_addr = sg_dma_address(sg); - cur_len = sg_dma_len(sg); - - if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) { - if (pmif->broken_dma_warn == 0) { - printk(KERN_WARNING "%s: DMA on non aligned address, " - "switching to PIO on Ohare chipset\n", drive->name); - pmif->broken_dma_warn = 1; - } - goto use_pio_instead; - } - while (cur_len) { - unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; - - if (count++ >= MAX_DCMDS) { - printk(KERN_WARNING "%s: DMA table too small\n", - drive->name); - goto use_pio_instead; - } - st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE); - st_le16(&table->req_count, tc); - st_le32(&table->phy_addr, cur_addr); - table->cmd_dep = 0; - table->xfer_status = 0; - table->res_count = 0; - cur_addr += tc; - cur_len -= tc; - ++table; - } - sg = sg_next(sg); - i--; - } - - /* convert the last command to an input/output last command */ - if (count) { - st_le16(&table[-1].command, wr? OUTPUT_LAST: INPUT_LAST); - /* add the stop command to the end of the list */ - memset(table, 0, sizeof(struct dbdma_cmd)); - st_le16(&table->command, DBDMA_STOP); - mb(); - writel(hwif->dmatable_dma, &dma->cmdptr); - return 1; - } - - printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name); - -use_pio_instead: - ide_destroy_dmatable(drive); - - return 0; /* revert to PIO for this request */ -} - -/* - * Prepare a DMA transfer. We build the DMA table, adjust the timings for - * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion - */ -static int -pmac_ide_dma_setup(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct request *rq = HWGROUP(drive)->rq; - u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); - - if (!pmac_ide_build_dmatable(drive, rq)) { - ide_map_sg(drive, rq); - return 1; - } - - /* Apple adds 60ns to wrDataSetup on reads */ - if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) { - writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0), - PMAC_IDE_REG(IDE_TIMING_CONFIG)); - (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); - } - - drive->waiting_for_dma = 1; - - return 0; -} - -static void -pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) -{ - /* issue cmd to drive */ - ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL); -} - -/* - * Kick the DMA controller into life after the DMA command has been issued - * to the drive. - */ -static void -pmac_ide_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma; - - dma = pmif->dma_regs; - - writel((RUN << 16) | RUN, &dma->control); - /* Make sure it gets to the controller right now */ - (void)readl(&dma->control); -} - -/* - * After a DMA transfer, make sure the controller is stopped - */ -static int -pmac_ide_dma_end (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; - u32 dstat; - - drive->waiting_for_dma = 0; - dstat = readl(&dma->status); - writel(((RUN|WAKE|DEAD) << 16), &dma->control); - - ide_destroy_dmatable(drive); - - /* verify good dma status. we don't check for ACTIVE beeing 0. We should... - * in theory, but with ATAPI decices doing buffer underruns, that would - * cause us to disable DMA, which isn't what we want - */ - return (dstat & (RUN|DEAD)) != RUN; -} - -/* - * Check out that the interrupt we got was for us. We can't always know this - * for sure with those Apple interfaces (well, we could on the recent ones but - * that's not implemented yet), on the other hand, we don't have shared interrupts - * so it's not really a problem - */ -static int -pmac_ide_dma_test_irq (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; - unsigned long status, timeout; - - /* We have to things to deal with here: - * - * - The dbdma won't stop if the command was started - * but completed with an error without transferring all - * datas. This happens when bad blocks are met during - * a multi-block transfer. - * - * - The dbdma fifo hasn't yet finished flushing to - * to system memory when the disk interrupt occurs. - * - */ - - /* If ACTIVE is cleared, the STOP command have passed and - * transfer is complete. - */ - status = readl(&dma->status); - if (!(status & ACTIVE)) - return 1; - - /* If dbdma didn't execute the STOP command yet, the - * active bit is still set. We consider that we aren't - * sharing interrupts (which is hopefully the case with - * those controllers) and so we just try to flush the - * channel for pending data in the fifo - */ - udelay(1); - writel((FLUSH << 16) | FLUSH, &dma->control); - timeout = 0; - for (;;) { - udelay(1); - status = readl(&dma->status); - if ((status & FLUSH) == 0) - break; - if (++timeout > 100) { - printk(KERN_WARNING "ide%d, ide_dma_test_irq \ - timeout flushing channel\n", HWIF(drive)->index); - break; - } - } - return 1; -} - -static void pmac_ide_dma_host_set(ide_drive_t *drive, int on) -{ -} - -static void -pmac_ide_dma_lost_irq (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; - unsigned long status = readl(&dma->status); - - printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); -} - -static const struct ide_dma_ops pmac_dma_ops = { - .dma_host_set = pmac_ide_dma_host_set, - .dma_setup = pmac_ide_dma_setup, - .dma_exec_cmd = pmac_ide_dma_exec_cmd, - .dma_start = pmac_ide_dma_start, - .dma_end = pmac_ide_dma_end, - .dma_test_irq = pmac_ide_dma_test_irq, - .dma_timeout = ide_dma_timeout, - .dma_lost_irq = pmac_ide_dma_lost_irq, -}; - -/* - * Allocate the data structures needed for using DMA with an interface - * and fill the proper list of functions pointers - */ -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - pmac_ide_hwif_t *pmif = - (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); - struct pci_dev *dev = to_pci_dev(hwif->dev); - - /* We won't need pci_dev if we switch to generic consistent - * DMA routines ... - */ - if (dev == NULL || pmif->dma_regs == 0) - return -ENODEV; - /* - * Allocate space for the DBDMA commands. - * The +2 is +1 for the stop command and +1 to allow for - * aligning the start address to a multiple of 16 bytes. - */ - pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent( - dev, - (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), - &hwif->dmatable_dma); - if (pmif->dma_table_cpu == NULL) { - printk(KERN_ERR "%s: unable to allocate DMA command list\n", - hwif->name); - return -ENOMEM; - } - - hwif->sg_max_nents = MAX_DCMDS; - - return 0; -} -#else -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - -module_init(pmac_ide_probe); - -MODULE_LICENSE("GPL"); |
