diff options
Diffstat (limited to 'drivers/ide/pci')
32 files changed, 2505 insertions, 1598 deletions
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile index fef0896..6591ff4 100644 --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -9,9 +9,10 @@ obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o +obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o -#obj-$(CONFIG_BLK_DEV_HPT37X) += hpt37x.o +obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o @@ -26,6 +27,7 @@ obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o +obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index f286079..d261bfb 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -441,7 +441,7 @@ static struct pci_driver driver = { .probe = aec62xx_init_one, }; -static int aec62xx_ide_init(void) +static int __init aec62xx_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index d419e4b..68df77e 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -586,11 +586,11 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c { unsigned long flags; u8 tmpbyte; - struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0)); + struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); - isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); #if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) if (!ali_proc) { @@ -613,8 +613,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c * clear bit 7 */ pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); - local_irq_restore(flags); - return 0; + goto out; } /* @@ -637,10 +636,8 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c * box without a device at 0:0.0. The ALi bridge will be at * 0:0.0 so if we didn't find one we know what is cooking. */ - if (north && north->vendor != PCI_VENDOR_ID_AL) { - local_irq_restore(flags); - return 0; - } + if (north && north->vendor != PCI_VENDOR_ID_AL) + goto out; if (m5229_revision < 0xC5 && isa_dev) { @@ -661,6 +658,9 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); } } +out: + pci_dev_put(north); + pci_dev_put(isa_dev); local_irq_restore(flags); return 0; } @@ -907,7 +907,7 @@ static struct pci_driver driver = { .probe = alim15x3_init_one, }; -static int ali15x3_ide_init(void) +static int __init ali15x3_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 753fe0e..a433699 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -544,7 +544,7 @@ static struct pci_driver driver = { .probe = amd74xx_probe, }; -static int amd74xx_ide_init(void) +static int __init amd74xx_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index d55b938..982ac31 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -46,6 +46,8 @@ static atiixp_ide_timing mdma_timing[] = { static int save_mdma_mode[4]; +static DEFINE_SPINLOCK(atiixp_lock); + /** * atiixp_ratemask - compute rate mask for ATIIXP IDE * @drive: IDE drive to compute for @@ -105,7 +107,7 @@ static int atiixp_ide_dma_host_on(ide_drive_t *drive) unsigned long flags; u16 tmp16; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); if (save_mdma_mode[drive->dn]) @@ -114,7 +116,7 @@ static int atiixp_ide_dma_host_on(ide_drive_t *drive) tmp16 |= (1 << drive->dn); pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); return __ide_dma_host_on(drive); } @@ -125,13 +127,13 @@ static int atiixp_ide_dma_host_off(ide_drive_t *drive) unsigned long flags; u16 tmp16; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); tmp16 &= ~(1 << drive->dn); pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); return __ide_dma_host_off(drive); } @@ -152,7 +154,7 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) u32 pio_timing_data; u16 pio_mode_data; - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); pio_mode_data &= ~(0x07 << (drive->dn * 4)); @@ -165,7 +167,7 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio) (pio_timing[pio].command_width << (timing_shift + 4)); pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); } /** @@ -189,7 +191,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed); - spin_lock_irqsave(&ide_lock, flags); + spin_lock_irqsave(&atiixp_lock, flags); save_mdma_mode[drive->dn] = 0; if (speed >= XFER_UDMA_0) { @@ -208,7 +210,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed) } } - spin_unlock_irqrestore(&ide_lock, flags); + spin_unlock_irqrestore(&atiixp_lock, flags); if (speed >= XFER_SW_DMA_0) pio = atiixp_dma_2_pio(speed); @@ -289,8 +291,12 @@ fast_ata_pio: static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) { + u8 udma_mode = 0; + u8 ch = hwif->channel; + struct pci_dev *pdev = hwif->pci_dev; + if (!hwif->irq) - hwif->irq = hwif->channel ? 15 : 14; + hwif->irq = ch ? 15 : 14; hwif->autodma = 0; hwif->tuneproc = &atiixp_tuneproc; @@ -306,8 +312,12 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->mwdma_mask = 0x06; hwif->swdma_mask = 0x04; - /* FIXME: proper cable detection needed */ - hwif->udma_four = 1; + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); + if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) + hwif->udma_four = 1; + else + hwif->udma_four = 0; + hwif->ide_dma_host_on = &atiixp_ide_dma_host_on; hwif->ide_dma_host_off = &atiixp_ide_dma_host_off; hwif->ide_dma_check = &atiixp_dma_check; @@ -318,19 +328,6 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->drives[0].autodma = hwif->autodma; } -static void __devinit init_hwif_sb600_legacy(ide_hwif_t *hwif) -{ - - hwif->atapi_dma = 1; - hwif->ultra_mask = 0x7f; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; - - if (!noautodma) - hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; -} static ide_pci_device_t atiixp_pci_info[] __devinitdata = { { /* 0 */ @@ -341,12 +338,13 @@ static ide_pci_device_t atiixp_pci_info[] __devinitdata = { .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, .bootable = ON_BOARD, },{ /* 1 */ - .name = "ATI SB600 SATA Legacy IDE", - .init_hwif = init_hwif_sb600_legacy, - .channels = 2, + .name = "SB600_PATA", + .init_hwif = init_hwif_atiixp, + .channels = 1, .autodma = AUTODMA, - .bootable = ON_BOARD, - } + .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, + .bootable = ON_BOARD, + }, }; /** @@ -367,8 +365,7 @@ static struct pci_device_id atiixp_pci_tbl[] = { { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); @@ -379,7 +376,7 @@ static struct pci_driver driver = { .probe = atiixp_init_one, }; -static int atiixp_ide_init(void) +static int __init atiixp_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 20c3271..aee947e 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -793,7 +793,7 @@ static struct pci_driver driver = { .probe = cmd64x_init_one, }; -static int cmd64x_ide_init(void) +static int __init cmd64x_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 079f7c8..ba6786a 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -260,7 +260,7 @@ static struct pci_driver driver = { .probe = cs5520_init_one, }; -static int cs5520_ide_init(void) +static int __init cs5520_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index ae405fa..9bf5fdf 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -374,7 +374,7 @@ static struct pci_driver driver = { .probe = cs5530_init_one, }; -static int cs5530_ide_init(void) +static int __init cs5530_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 64330c4..9eafcbf 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -519,7 +519,7 @@ static struct pci_driver driver = { .probe = cy82c693_init_one, }; -static int cy82c693_ide_init(void) +static int __init cy82c693_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c new file mode 100644 index 0000000..e2672fc --- /dev/null +++ b/drivers/ide/pci/delkin_cb.c @@ -0,0 +1,140 @@ +/* + * linux/drivers/ide/pci/delkin_cb.c + * + * Created 20 Oct 2004 by Mark Lord + * + * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter + * + * Modeled after the 16-bit PCMCIA driver: ide-cs.c + * + * This is slightly peculiar, in that it is a PCI driver, + * but is NOT an IDE PCI driver -- the IDE layer does not directly + * support hot insertion/removal of PCI interfaces, so this driver + * is unable to use the IDE PCI interfaces. Instead, it uses the + * same interfaces as the ide-cs (PCMCIA) driver uses. + * On the plus side, the driver is also smaller/simpler this way. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ +#include <linux/autoconf.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/io.h> + +/* + * No chip documentation has yet been found, + * so these configuration values were pulled from + * a running Win98 system using "debug". + * This gives around 3MByte/second read performance, + * which is about 2/3 of what the chip is capable of. + * + * There is also a 4KByte mmio region on the card, + * but its purpose has yet to be reverse-engineered. + */ +static const u8 setup[] = { + 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00, + 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, +}; + +static int __devinit +delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) +{ + unsigned long base; + hw_regs_t hw; + ide_hwif_t *hwif = NULL; + ide_drive_t *drive; + int i, rc; + + rc = pci_enable_device(dev); + if (rc) { + printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc); + return rc; + } + rc = pci_request_regions(dev, "delkin_cb"); + if (rc) { + printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc); + pci_disable_device(dev); + return rc; + } + base = pci_resource_start(dev, 0); + outb(0x02, base + 0x1e); /* set nIEN to block interrupts */ + inb(base + 0x17); /* read status to clear interrupts */ + for (i = 0; i < sizeof(setup); ++i) { + if (setup[i]) + outb(setup[i], base + i); + } + pci_release_regions(dev); /* IDE layer handles regions itself */ + + memset(&hw, 0, sizeof(hw)); + ide_std_init_ports(&hw, base + 0x10, base + 0x1e); + hw.irq = dev->irq; + hw.chipset = ide_pci; /* this enables IRQ sharing */ + + rc = ide_register_hw_with_fixup(&hw, &hwif, ide_undecoded_slave); + if (rc < 0) { + printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); + pci_disable_device(dev); + return -ENODEV; + } + pci_set_drvdata(dev, hwif); + hwif->pci_dev = dev; + drive = &hwif->drives[0]; + if (drive->present) { + drive->io_32bit = 1; + drive->unmask = 1; + } + return 0; +} + +static void +delkin_cb_remove (struct pci_dev *dev) +{ + ide_hwif_t *hwif = pci_get_drvdata(dev); + + if (hwif) + ide_unregister(hwif->index); + pci_disable_device(dev); +} + +static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { + { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl); + +static struct pci_driver driver = { + .name = "Delkin-ASKA-Workbit Cardbus IDE", + .id_table = delkin_cb_pci_tbl, + .probe = delkin_cb_probe, + .remove = delkin_cb_remove, +}; + +static int +delkin_cb_init (void) +{ + return pci_module_init(&driver); +} + +static void +delkin_cb_exit (void) +{ + pci_unregister_driver(&driver); +} + +module_init(delkin_cb_init); +module_exit(delkin_cb_exit); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 9f30688..b408c6c 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -185,36 +185,6 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, - },{ /* 15 */ - .name = "JMB361", - .init_hwif = init_hwif_generic, - .channels = 2, - .autodma = AUTODMA, - .bootable = OFF_BOARD, - },{ /* 16 */ - .name = "JMB363", - .init_hwif = init_hwif_generic, - .channels = 2, - .autodma = AUTODMA, - .bootable = OFF_BOARD, - },{ /* 17 */ - .name = "JMB365", - .init_hwif = init_hwif_generic, - .channels = 2, - .autodma = AUTODMA, - .bootable = OFF_BOARD, - },{ /* 18 */ - .name = "JMB366", - .init_hwif = init_hwif_generic, - .channels = 2, - .autodma = AUTODMA, - .bootable = OFF_BOARD, - },{ /* 19 */ - .name = "JMB368", - .init_hwif = init_hwif_generic, - .channels = 2, - .autodma = AUTODMA, - .bootable = OFF_BOARD, } }; @@ -281,11 +251,6 @@ static struct pci_device_id generic_pci_tbl[] = { { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13}, { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18}, - { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19}, /* Must come last. If you add entries adjust this table appropriately and the init_one code */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0}, { 0, }, @@ -298,7 +263,7 @@ static struct pci_driver driver = { .probe = generic_init_one, }; -static int generic_ide_init(void) +static int __init generic_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index b46cb04..ce7b08f 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -265,7 +265,7 @@ static struct pci_driver driver = { .probe = hpt34x_init_one, }; -static int hpt34x_ide_init(void) +static int __init hpt34x_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index e993a51..05be8fa 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,9 +1,10 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003 + * linux/drivers/ide/pci/hpt366.c Version 1.01 Dec 23, 2006 * * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc + * Portions Copyright (C) 2005-2006 MontaVista Software, Inc. * * Thanks to HighPoint Technologies for their assistance, and hardware. * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his @@ -11,9 +12,11 @@ * development and support. * * - * Highpoint have their own driver (source except for the raid part) - * available from http://www.highpoint-tech.com/hpt3xx-opensource-v131.tgz - * This may be useful to anyone wanting to work on the mainstream hpt IDE. + * HighPoint has its own drivers (open source except for the RAID part) + * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * This may be useful to anyone wanting to work on this driver, however do not + * trust them too much since the code tends to become less and less meaningful + * as the time passes... :-/ * * Note that final HPT370 support was done by force extraction of GPL. * @@ -52,9 +55,65 @@ * keeping me sane. * Alan Cox <alan@redhat.com> * + * - fix the clock turnaround code: it was writing to the wrong ports when + * called for the secondary channel, caching the current clock mode per- + * channel caused the cached register value to get out of sync with the + * actual one, the channels weren't serialized, the turnaround shouldn't + * be done on 66 MHz PCI bus + * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used + * does not allow for this speed anyway + * - avoid touching disabled channels (e.g. HPT371/N are single channel chips, + * their primary channel is kind of virtual, it isn't tied to any pins) + * - fix/remove bad/unused timing tables and use one set of tables for the whole + * HPT37x chip family; save space by introducing the separate transfer mode + * table in which the mode lookup is done + * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives + * the wrong PCI frequency since DPLL has already been calibrated by BIOS + * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, + * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead + * - pass to init_chipset() handlers a copy of the IDE PCI device structure as + * they tamper with its fields + * - pass to the init_setup handlers a copy of the ide_pci_device_t structure + * since they may tamper with its fields + * - prefix the driver startup messages with the real chip name + * - claim the extra 240 bytes of I/O space for all chips + * - optimize the rate masking/filtering and the drive list lookup code + * - use pci_get_slot() to get to the function 1 of HPT36x/374 + * - cache offset of the channel's misc. control registers (MCRs) being used + * throughout the driver + * - only touch the relevant MCR when detecting the cable type on HPT374's + * function 1 + * - rename all the register related variables consistently + * - move all the interrupt twiddling code from the speedproc handlers into + * init_hwif_hpt366(), also grouping all the DMA related code together there + * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and + * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings + * when setting an UltraDMA mode + * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select + * the best possible one + * - clean up DMA timeout handling for HPT370 + * - switch to using the enumeration type to differ between the numerous chip + * variants, matching PCI device/revision ID with the chip type early, at the + * init_setup stage + * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies, + * stop duplicating it for each channel by storing the pointer in the pci_dev + * structure: first, at the init_setup stage, point it to a static "template" + * with only the chip type and its specific base DPLL frequency, the highest + * supported DMA mode, and the chip settings table pointer filled, then, at + * the init_chipset stage, allocate per-chip instance and fill it with the + * rest of the necessary information + * - get rid of the constant thresholds in the HPT37x PCI clock detection code, + * switch to calculating PCI clock frequency based on the chip's base DPLL + * frequency + * - switch to using the DPLL clock and enable UltraATA/133 mode by default on + * anything newer than HPT370/A + * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(), + * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips; + * unify HPT36x/37x timing setup code and the speedproc handlers by joining + * the register setting lists into the table indexed by the clock selected + * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com> */ - #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> @@ -76,8 +135,8 @@ /* various tuning parameters */ #define HPT_RESET_STATE_ENGINE -#undef HPT_DELAY_INTERRUPT -#undef HPT_SERIALIZE_IO +#undef HPT_DELAY_INTERRUPT +#define HPT_SERIALIZE_IO 0 static const char *quirk_drives[] = { "QUANTUM FIREBALLlct08 08", @@ -141,387 +200,324 @@ static const char *bad_ata33[] = { NULL }; -struct chipset_bus_clock_list_entry { - u8 xfer_speed; - unsigned int chipset_settings; +static u8 xfer_speeds[] = { + XFER_UDMA_6, + XFER_UDMA_5, + XFER_UDMA_4, + XFER_UDMA_3, + XFER_UDMA_2, + XFER_UDMA_1, + XFER_UDMA_0, + + XFER_MW_DMA_2, + XFER_MW_DMA_1, + XFER_MW_DMA_0, + + XFER_PIO_4, + XFER_PIO_3, + XFER_PIO_2, + XFER_PIO_1, + XFER_PIO_0 }; -/* key for bus clock timings - * bit - * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW - * DMA. cycles = value + 1 - * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file - * register access. - * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file - * register access. - * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. - * during task file register access. - * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA - * xfer. - * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task - * register access. - * 28 UDMA enable - * 29 DMA enable - * 30 PIO_MST enable. if set, the chip is in bus master mode during - * PIO. - * 31 FIFO enable. +/* Key for bus clock timings + * 36x 37x + * bits bits + * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. + * cycles = value + 1 + * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file + * register access. + * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file + * register access. + * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer. + * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock. + * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and + * MW DMA xfer. + * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for + * task file register access. + * 28 28 UDMA enable. + * 29 29 DMA enable. + * 30 30 PIO MST enable. If set, the chip is in bus master mode during + * PIO xfer. + * 31 31 FIFO enable. */ -static struct chipset_bus_clock_list_entry forty_base_hpt366[] = { - { XFER_UDMA_4, 0x900fd943 }, - { XFER_UDMA_3, 0x900ad943 }, - { XFER_UDMA_2, 0x900bd943 }, - { XFER_UDMA_1, 0x9008d943 }, - { XFER_UDMA_0, 0x9008d943 }, - - { XFER_MW_DMA_2, 0xa008d943 }, - { XFER_MW_DMA_1, 0xa010d955 }, - { XFER_MW_DMA_0, 0xa010d9fc }, - - { XFER_PIO_4, 0xc008d963 }, - { XFER_PIO_3, 0xc010d974 }, - { XFER_PIO_2, 0xc010d997 }, - { XFER_PIO_1, 0xc010d9c7 }, - { XFER_PIO_0, 0xc018d9d9 }, - { 0, 0x0120d9d9 } + +static u32 forty_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x900fd943, + /* XFER_UDMA_5 */ 0x900fd943, + /* XFER_UDMA_4 */ 0x900fd943, + /* XFER_UDMA_3 */ 0x900ad943, + /* XFER_UDMA_2 */ 0x900bd943, + /* XFER_UDMA_1 */ 0x9008d943, + /* XFER_UDMA_0 */ 0x9008d943, + + /* XFER_MW_DMA_2 */ 0xa008d943, + /* XFER_MW_DMA_1 */ 0xa010d955, + /* XFER_MW_DMA_0 */ 0xa010d9fc, + + /* XFER_PIO_4 */ 0xc008d963, + /* XFER_PIO_3 */ 0xc010d974, + /* XFER_PIO_2 */ 0xc010d997, + /* XFER_PIO_1 */ 0xc010d9c7, + /* XFER_PIO_0 */ 0xc018d9d9 }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = { - { XFER_UDMA_4, 0x90c9a731 }, - { XFER_UDMA_3, 0x90cfa731 }, - { XFER_UDMA_2, 0x90caa731 }, - { XFER_UDMA_1, 0x90cba731 }, - { XFER_UDMA_0, 0x90c8a731 }, - - { XFER_MW_DMA_2, 0xa0c8a731 }, - { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */ - { XFER_MW_DMA_0, 0xa0c8a797 }, - - { XFER_PIO_4, 0xc0c8a731 }, - { XFER_PIO_3, 0xc0c8a742 }, - { XFER_PIO_2, 0xc0d0a753 }, - { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */ - { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */ - { 0, 0x0120a7a7 } +static u32 thirty_three_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x90c9a731, + /* XFER_UDMA_5 */ 0x90c9a731, + /* XFER_UDMA_4 */ 0x90c9a731, + /* XFER_UDMA_3 */ 0x90cfa731, + /* XFER_UDMA_2 */ 0x90caa731, + /* XFER_UDMA_1 */ 0x90cba731, + /* XFER_UDMA_0 */ 0x90c8a731, + + /* XFER_MW_DMA_2 */ 0xa0c8a731, + /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */ + /* XFER_MW_DMA_0 */ 0xa0c8a797, + + /* XFER_PIO_4 */ 0xc0c8a731, + /* XFER_PIO_3 */ 0xc0c8a742, + /* XFER_PIO_2 */ 0xc0d0a753, + /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */ + /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */ }; -static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = { - { XFER_UDMA_4, 0x90c98521 }, - { XFER_UDMA_3, 0x90cf8521 }, - { XFER_UDMA_2, 0x90cf8521 }, - { XFER_UDMA_1, 0x90cb8521 }, - { XFER_UDMA_0, 0x90cb8521 }, - - { XFER_MW_DMA_2, 0xa0ca8521 }, - { XFER_MW_DMA_1, 0xa0ca8532 }, - { XFER_MW_DMA_0, 0xa0ca8575 }, - - { XFER_PIO_4, 0xc0ca8521 }, - { XFER_PIO_3, 0xc0ca8532 }, - { XFER_PIO_2, 0xc0ca8542 }, - { XFER_PIO_1, 0xc0d08572 }, - { XFER_PIO_0, 0xc0d08585 }, - { 0, 0x01208585 } +static u32 twenty_five_base_hpt36x[] = { + /* XFER_UDMA_6 */ 0x90c98521, + /* XFER_UDMA_5 */ 0x90c98521, + /* XFER_UDMA_4 */ 0x90c98521, + /* XFER_UDMA_3 */ 0x90cf8521, + /* XFER_UDMA_2 */ 0x90cf8521, + /* XFER_UDMA_1 */ 0x90cb8521, + /* XFER_UDMA_0 */ 0x90cb8521, + + /* XFER_MW_DMA_2 */ 0xa0ca8521, + /* XFER_MW_DMA_1 */ 0xa0ca8532, + /* XFER_MW_DMA_0 */ 0xa0ca8575, + + /* XFER_PIO_4 */ 0xc0ca8521, + /* XFER_PIO_3 */ 0xc0ca8532, + /* XFER_PIO_2 */ 0xc0ca8542, + /* XFER_PIO_1 */ 0xc0d08572, + /* XFER_PIO_0 */ 0xc0d08585 }; -/* from highpoint documentation. these are old values */ -static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = { -/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */ - { XFER_UDMA_5, 0x16454e31 }, - { XFER_UDMA_4, 0x16454e31 }, - { XFER_UDMA_3, 0x166d4e31 }, - { XFER_UDMA_2, 0x16494e31 }, - { XFER_UDMA_1, 0x164d4e31 }, - { XFER_UDMA_0, 0x16514e31 }, - - { XFER_MW_DMA_2, 0x26514e21 }, - { XFER_MW_DMA_1, 0x26514e33 }, - { XFER_MW_DMA_0, 0x26514e97 }, - - { XFER_PIO_4, 0x06514e21 }, - { XFER_PIO_3, 0x06514e22 }, - { XFER_PIO_2, 0x06514e33 }, - { XFER_PIO_1, 0x06914e43 }, - { XFER_PIO_0, 0x06914e57 }, - { 0, 0x06514e57 } +static u32 thirty_three_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ + /* XFER_UDMA_5 */ 0x12446231, + /* XFER_UDMA_4 */ 0x12446231, + /* XFER_UDMA_3 */ 0x126c6231, + /* XFER_UDMA_2 */ 0x12486231, + /* XFER_UDMA_1 */ 0x124c6233, + /* XFER_UDMA_0 */ 0x12506297, + + /* XFER_MW_DMA_2 */ 0x22406c31, + /* XFER_MW_DMA_1 */ 0x22406c33, + /* XFER_MW_DMA_0 */ 0x22406c97, + + /* XFER_PIO_4 */ 0x06414e31, + /* XFER_PIO_3 */ 0x06414e42, + /* XFER_PIO_2 */ 0x06414e53, + /* XFER_PIO_1 */ 0x06814e93, + /* XFER_PIO_0 */ 0x06814ea7 }; -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = { - { XFER_UDMA_5, 0x14846231 }, - { XFER_UDMA_4, 0x14886231 }, - { XFER_UDMA_3, 0x148c6231 }, - { XFER_UDMA_2, 0x148c6231 }, - { XFER_UDMA_1, 0x14906231 }, - { XFER_UDMA_0, 0x14986231 }, - - { XFER_MW_DMA_2, 0x26514e21 }, - { XFER_MW_DMA_1, 0x26514e33 }, - { XFER_MW_DMA_0, 0x26514e97 }, - - { XFER_PIO_4, 0x06514e21 }, - { XFER_PIO_3, 0x06514e22 }, - { XFER_PIO_2, 0x06514e33 }, - { XFER_PIO_1, 0x06914e43 }, - { XFER_PIO_0, 0x06914e57 }, - { 0, 0x06514e57 } +static u32 fifty_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x12848242, + /* XFER_UDMA_5 */ 0x12848242, + /* XFER_UDMA_4 */ 0x12ac8242, + /* XFER_UDMA_3 */ 0x128c8242, + /* XFER_UDMA_2 */ 0x120c8242, + /* XFER_UDMA_1 */ 0x12148254, + /* XFER_UDMA_0 */ 0x121882ea, + + /* XFER_MW_DMA_2 */ 0x22808242, + /* XFER_MW_DMA_1 */ 0x22808254, + /* XFER_MW_DMA_0 */ 0x228082ea, + + /* XFER_PIO_4 */ 0x0a81f442, + /* XFER_PIO_3 */ 0x0a81f443, + /* XFER_PIO_2 */ 0x0a81f454, + /* XFER_PIO_1 */ 0x0ac1f465, + /* XFER_PIO_0 */ 0x0ac1f48a }; -/* these are the current (4 sep 2001) timings from highpoint */ -static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = { - { XFER_UDMA_5, 0x12446231 }, - { XFER_UDMA_4, 0x12446231 }, - { XFER_UDMA_3, 0x126c6231 }, - { XFER_UDMA_2, 0x12486231 }, - { XFER_UDMA_1, 0x124c6233 }, - { XFER_UDMA_0, 0x12506297 }, - - { XFER_MW_DMA_2, 0x22406c31 }, - { XFER_MW_DMA_1, 0x22406c33 }, - { XFER_MW_DMA_0, 0x22406c97 }, - - { XFER_PIO_4, 0x06414e31 }, - { XFER_PIO_3, 0x06414e42 }, - { XFER_PIO_2, 0x06414e53 }, - { XFER_PIO_1, 0x06814e93 }, - { XFER_PIO_0, 0x06814ea7 }, - { 0, 0x06814ea7 } +static u32 sixty_six_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1c869c62, + /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */ + /* XFER_UDMA_4 */ 0x1c8a9c62, + /* XFER_UDMA_3 */ 0x1c8e9c62, + /* XFER_UDMA_2 */ 0x1c929c62, + /* XFER_UDMA_1 */ 0x1c9a9c62, + /* XFER_UDMA_0 */ 0x1c829c62, + + /* XFER_MW_DMA_2 */ 0x2c829c62, + /* XFER_MW_DMA_1 */ 0x2c829c66, + /* XFER_MW_DMA_0 */ 0x2c829d2e, + + /* XFER_PIO_4 */ 0x0c829c62, + /* XFER_PIO_3 */ 0x0c829c84, + /* XFER_PIO_2 */ 0x0c829ca6, + /* XFER_PIO_1 */ 0x0d029d26, + /* XFER_PIO_0 */ 0x0d029d5e }; -/* 2x 33MHz timings */ -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = { - { XFER_UDMA_5, 0x1488e673 }, - { XFER_UDMA_4, 0x1488e673 }, - { XFER_UDMA_3, 0x1498e673 }, - { XFER_UDMA_2, 0x1490e673 }, - { XFER_UDMA_1, 0x1498e677 }, - { XFER_UDMA_0, 0x14a0e73f }, - - { XFER_MW_DMA_2, 0x2480fa73 }, - { XFER_MW_DMA_1, 0x2480fa77 }, - { XFER_MW_DMA_0, 0x2480fb3f }, - - { XFER_PIO_4, 0x0c82be73 }, - { XFER_PIO_3, 0x0c82be95 }, - { XFER_PIO_2, 0x0c82beb7 }, - { XFER_PIO_1, 0x0d02bf37 }, - { XFER_PIO_0, 0x0d02bf5f }, - { 0, 0x0d02bf5f } +#define HPT366_DEBUG_DRIVE_INFO 0 +#define HPT374_ALLOW_ATA133_6 1 +#define HPT371_ALLOW_ATA133_6 1 +#define HPT302_ALLOW_ATA133_6 1 +#define HPT372_ALLOW_ATA133_6 1 +#define HPT370_ALLOW_ATA100_5 0 +#define HPT366_ALLOW_ATA66_4 1 +#define HPT366_ALLOW_ATA66_3 1 +#define HPT366_MAX_DEVS 8 + +/* Supported ATA clock frequencies */ +enum ata_clock { + ATA_CLOCK_25MHZ, + ATA_CLOCK_33MHZ, + ATA_CLOCK_40MHZ, + ATA_CLOCK_50MHZ, + ATA_CLOCK_66MHZ, + NUM_ATA_CLOCKS }; -static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = { - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x0ac1f48a } +/* + * Hold all the HighPoint chip information in one place. + */ + +struct hpt_info { + u8 chip_type; /* Chip type */ + u8 max_mode; /* Speeds allowed */ + u8 dpll_clk; /* DPLL clock in MHz */ + u8 pci_clk; /* PCI clock in MHz */ + u32 **settings; /* Chipset settings table */ }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = { - { XFER_UDMA_6, 0x1c81dc62 }, - { XFER_UDMA_5, 0x1c6ddc62 }, - { XFER_UDMA_4, 0x1c8ddc62 }, - { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ - { XFER_UDMA_2, 0x1c91dc62 }, - { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ - { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ - - { XFER_MW_DMA_2, 0x2c829262 }, - { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ - { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ - - { XFER_PIO_4, 0x0c829c62 }, - { XFER_PIO_3, 0x0c829c84 }, - { XFER_PIO_2, 0x0c829ca6 }, - { XFER_PIO_1, 0x0d029d26 }, - { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d5e } +/* Supported HighPoint chips */ +enum { + HPT36x, + HPT370, + HPT370A, + HPT374, + HPT372, + HPT372A, + HPT302, + HPT371, + HPT372N, + HPT302N, + HPT371N }; -static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = { - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x0a81f443 } +static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = { + twenty_five_base_hpt36x, + thirty_three_base_hpt36x, + forty_base_hpt36x, + NULL, + NULL }; -static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = { - { XFER_UDMA_6, 0x1c869c62 }, - { XFER_UDMA_5, 0x1cae9c62 }, - { XFER_UDMA_4, 0x1c8a9c62 }, - { XFER_UDMA_3, 0x1c8e9c62 }, - { XFER_UDMA_2, 0x1c929c62 }, - { XFER_UDMA_1, 0x1c9a9c62 }, - { XFER_UDMA_0, 0x1c829c62 }, - - { XFER_MW_DMA_2, 0x2c829c62 }, - { XFER_MW_DMA_1, 0x2c829c66 }, - { XFER_MW_DMA_0, 0x2c829d2e }, - - { XFER_PIO_4, 0x0c829c62 }, - { XFER_PIO_3, 0x0c829c84 }, - { XFER_PIO_2, 0x0c829ca6 }, - { XFER_PIO_1, 0x0d029d26 }, - { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d26 } +static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = { + NULL, + thirty_three_base_hpt37x, + NULL, + fifty_base_hpt37x, + sixty_six_base_hpt37x }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = { - { XFER_UDMA_6, 0x12808242 }, - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x06814e93 } +static struct hpt_info hpt36x __devinitdata = { + .chip_type = HPT36x, + .max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1, + .dpll_clk = 0, /* no DPLL */ + .settings = hpt36x_settings }; -/* FIXME: 50MHz timings for HPT374 */ - -#if 0 -static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = { - { XFER_UDMA_6, 0x12406231 }, /* checkme */ - { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */ - { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */ - { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */ - { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */ - { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */ - { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */ - { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */ - { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */ - { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */ - { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */ - { 0, 0x06814ea7 } +static struct hpt_info hpt370 __devinitdata = { + .chip_type = HPT370, + .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .dpll_clk = 48, + .settings = hpt37x_settings }; -#endif -#define HPT366_DEBUG_DRIVE_INFO 0 -#define HPT374_ALLOW_ATA133_6 0 -#define HPT371_ALLOW_ATA133_6 0 -#define HPT302_ALLOW_ATA133_6 0 -#define HPT372_ALLOW_ATA133_6 1 -#define HPT370_ALLOW_ATA100_5 1 -#define HPT366_ALLOW_ATA66_4 1 -#define HPT366_ALLOW_ATA66_3 1 -#define HPT366_MAX_DEVS 8 +static struct hpt_info hpt370a __devinitdata = { + .chip_type = HPT370A, + .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2, + .dpll_clk = 48, + .settings = hpt37x_settings +}; -#define F_LOW_PCI_33 0x23 -#define F_LOW_PCI_40 0x29 -#define F_LOW_PCI_50 0x2d -#define F_LOW_PCI_66 0x42 +static struct hpt_info hpt374 __devinitdata = { + .chip_type = HPT374, + .max_mode = HPT374_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 48, + .settings = hpt37x_settings +}; -/* - * Hold all the highpoint quirks and revision information in one - * place. - */ +static struct hpt_info hpt372 __devinitdata = { + .chip_type = HPT372, + .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 55, + .settings = hpt37x_settings +}; -struct hpt_info -{ - u8 max_mode; /* Speeds allowed */ - int revision; /* Chipset revision */ - int flags; /* Chipset properties */ -#define PLL_MODE 1 -#define IS_372N 2 - /* Speed table */ - struct chipset_bus_clock_list_entry *speed; +static struct hpt_info hpt372a __devinitdata = { + .chip_type = HPT372A, + .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 66, + .settings = hpt37x_settings }; -/* - * This wants fixing so that we do everything not by classrev - * (which breaks on the newest chips) but by creating an - * enumeration of chip variants and using that - */ +static struct hpt_info hpt302 __devinitdata = { + .chip_type = HPT302, + .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 66, + .settings = hpt37x_settings +}; -static __devinit u32 hpt_revision (struct pci_dev *dev) +static struct hpt_info hpt371 __devinitdata = { + .chip_type = HPT371, + .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 66, + .settings = hpt37x_settings +}; + +static struct hpt_info hpt372n __devinitdata = { + .chip_type = HPT372N, + .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 77, + .settings = hpt37x_settings +}; + +static struct hpt_info hpt302n __devinitdata = { + .chip_type = HPT302N, + .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 77, +}; + +static struct hpt_info hpt371n __devinitdata = { + .chip_type = HPT371N, + .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3, + .dpll_clk = 77, + .settings = hpt37x_settings +}; + +static int check_in_drive_list(ide_drive_t *drive, const char **list) { - u32 class_rev; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; - - switch(dev->device) { - /* Remap new 372N onto 372 */ - case PCI_DEVICE_ID_TTI_HPT372N: - class_rev = PCI_DEVICE_ID_TTI_HPT372; break; - case PCI_DEVICE_ID_TTI_HPT374: - class_rev = PCI_DEVICE_ID_TTI_HPT374; break; - case PCI_DEVICE_ID_TTI_HPT371: - class_rev = PCI_DEVICE_ID_TTI_HPT371; break; - case PCI_DEVICE_ID_TTI_HPT302: - class_rev = PCI_DEVICE_ID_TTI_HPT302; break; - case PCI_DEVICE_ID_TTI_HPT372: - class_rev = PCI_DEVICE_ID_TTI_HPT372; break; - default: - break; - } - return class_rev; -} + struct hd_driveid *id = drive->id; -static int check_in_drive_lists(ide_drive_t *drive, const char **list); + while (*list) + if (!strcmp(*list++,id->model)) + return 1; + return 0; +} -static u8 hpt3xx_ratemask (ide_drive_t *drive) +static u8 hpt3xx_ratemask(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 mode = 0; - - /* FIXME: TODO - move this to set info->mode once at boot */ - - if (info->revision >= 8) { /* HPT374 */ - mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 7) { /* HPT371 */ - mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 6) { /* HPT302 */ - mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 5) { /* HPT372 */ - mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3; - } else if (info->revision >= 4) { /* HPT370A */ - mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; - } else if (info->revision >= 3) { /* HPT370 */ - mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2; - mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode; - } else { /* HPT366 and HPT368 */ - mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2; - } + struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); + u8 mode = info->max_mode; + if (!eighty_ninty_three(drive) && mode) mode = min(mode, (u8)1); return mode; @@ -532,301 +528,228 @@ static u8 hpt3xx_ratemask (ide_drive_t *drive) * either PIO or UDMA modes 0,4,5 */ -static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed) +static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); + struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); + u8 chip_type = info->chip_type; u8 mode = hpt3xx_ratemask(drive); if (drive->media != ide_disk) return min(speed, (u8)XFER_PIO_4); - switch(mode) { + switch (mode) { case 0x04: - speed = min(speed, (u8)XFER_UDMA_6); + speed = min_t(u8, speed, XFER_UDMA_6); break; case 0x03: - speed = min(speed, (u8)XFER_UDMA_5); - if (info->revision >= 5) + speed = min_t(u8, speed, XFER_UDMA_5); + if (chip_type >= HPT374) break; - if (check_in_drive_lists(drive, bad_ata100_5)) - speed = min(speed, (u8)XFER_UDMA_4); - break; + if (!check_in_drive_list(drive, bad_ata100_5)) + goto check_bad_ata33; + /* fall thru */ case 0x02: - speed = min(speed, (u8)XFER_UDMA_4); - /* - * CHECK ME, Does this need to be set to 5 ?? - */ - if (info->revision >= 3) - break; - if ((check_in_drive_lists(drive, bad_ata66_4)) || - (!(HPT366_ALLOW_ATA66_4))) - speed = min(speed, (u8)XFER_UDMA_3); - if ((check_in_drive_lists(drive, bad_ata66_3)) || - (!(HPT366_ALLOW_ATA66_3))) - speed = min(speed, (u8)XFER_UDMA_2); - break; + speed = min_t(u8, speed, XFER_UDMA_4); + + /* + * CHECK ME, Does this need to be changed to HPT374 ?? + */ + if (chip_type >= HPT370) + goto check_bad_ata33; + if (HPT366_ALLOW_ATA66_4 && + !check_in_drive_list(drive, bad_ata66_4)) + goto check_bad_ata33; + + speed = min_t(u8, speed, XFER_UDMA_3); + if (HPT366_ALLOW_ATA66_3 && + !check_in_drive_list(drive, bad_ata66_3)) + goto check_bad_ata33; + /* fall thru */ case 0x01: - speed = min(speed, (u8)XFER_UDMA_2); - /* - * CHECK ME, Does this need to be set to 5 ?? - */ - if (info->revision >= 3) + speed = min_t(u8, speed, XFER_UDMA_2); + + check_bad_ata33: + if (chip_type >= HPT370A) break; - if (check_in_drive_lists(drive, bad_ata33)) - speed = min(speed, (u8)XFER_MW_DMA_2); - break; + if (!check_in_drive_list(drive, bad_ata33)) + break; + /* fall thru */ case 0x00: default: - speed = min(speed, (u8)XFER_MW_DMA_2); + speed = min_t(u8, speed, XFER_MW_DMA_2); break; } return speed; } -static int check_in_drive_lists (ide_drive_t *drive, const char **list) +static u32 get_speed_setting(u8 speed, struct hpt_info *info) { - struct hd_driveid *id = drive->id; - - if (quirk_drives == list) { - while (*list) - if (strstr(id->model, *list++)) - return 1; - } else { - while (*list) - if (!strcmp(*list++,id->model)) - return 1; - } - return 0; -} - -static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) -{ - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) - return chipset_table->chipset_settings; - return chipset_table->chipset_settings; -} - -static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) -{ - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40; - u8 regfast = (hwif->channel) ? 0x55 : 0x51; - u8 drive_fast = 0; - u32 reg1 = 0, reg2 = 0; + int i; /* - * Disable the "fast interrupt" prediction. + * Lookup the transfer mode table to get the index into + * the timing table. + * + * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used. */ - pci_read_config_byte(dev, regfast, &drive_fast); - if (drive_fast & 0x80) - pci_write_config_byte(dev, regfast, drive_fast & ~0x80); - - reg2 = pci_bus_clock_list(speed, info->speed); - + for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++) + if (xfer_speeds[i] == speed) + break; /* - * Disable on-chip PIO FIFO/buffer - * (to avoid problems handling I/O errors later) + * NOTE: info->settings only points to the pointer + * to the list of the actual register values */ - pci_read_config_dword(dev, regtime, ®1); - if (speed >= XFER_MW_DMA_0) { - reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000); - } else { - reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000); - } - reg2 &= ~0x80000000; - - pci_write_config_dword(dev, regtime, reg2); - - return ide_config_drive_speed(drive, speed); + return (*info->settings)[i]; } -static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51; - u8 drive_pci = 0x40 + (drive->dn * 4); - u8 new_fast = 0, drive_fast = 0; - u32 list_conf = 0, drive_conf = 0; - u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = pci_get_drvdata(dev); + u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 itr_addr = drive->dn ? 0x44 : 0x40; + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : + (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); + u32 new_itr = get_speed_setting(speed, info); + u32 old_itr = 0; /* - * Disable the "fast interrupt" prediction. - * don't holdoff on interrupts. (== 0x01 despite what the docs say) + * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) + * to avoid problems handling I/O errors later */ - pci_read_config_byte(dev, regfast, &drive_fast); - new_fast = drive_fast; - if (new_fast & 0x02) - new_fast &= ~0x02; + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); + new_itr &= ~0xc0000000; -#ifdef HPT_DELAY_INTERRUPT - if (new_fast & 0x01) - new_fast &= ~0x01; -#else - if ((new_fast & 0x01) == 0) - new_fast |= 0x01; -#endif - if (new_fast != drive_fast) - pci_write_config_byte(dev, regfast, new_fast); - - list_conf = pci_bus_clock_list(speed, info->speed); - - pci_read_config_dword(dev, drive_pci, &drive_conf); - list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); - - if (speed < XFER_MW_DMA_0) - list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ - pci_write_config_dword(dev, drive_pci, list_conf); + pci_write_config_dword(dev, itr_addr, new_itr); return ide_config_drive_speed(drive, speed); } -static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed) +static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) { - ide_hwif_t *hwif = drive->hwif; - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); - u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51; - u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4); - u32 list_conf = 0, drive_conf = 0; - u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000; - - /* - * Disable the "fast interrupt" prediction. - * don't holdoff on interrupts. (== 0x01 despite what the docs say) - */ - pci_read_config_byte(dev, regfast, &drive_fast); - drive_fast &= ~0x07; - pci_write_config_byte(dev, regfast, drive_fast); - - list_conf = pci_bus_clock_list(speed, info->speed); - pci_read_config_dword(dev, drive_pci, &drive_conf); - list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask); + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = pci_get_drvdata(dev); + u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 itr_addr = 0x40 + (drive->dn * 4); + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : + (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); + u32 new_itr = get_speed_setting(speed, info); + u32 old_itr = 0; + + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); + if (speed < XFER_MW_DMA_0) - list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ - pci_write_config_dword(dev, drive_pci, list_conf); + new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ + pci_write_config_dword(dev, itr_addr, new_itr); return ide_config_drive_speed(drive, speed); } -static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed) +static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); - - if (info->revision >= 8) - return hpt372_tune_chipset(drive, speed); /* not a typo */ - else if (info->revision >= 5) - return hpt372_tune_chipset(drive, speed); - else if (info->revision >= 3) - return hpt370_tune_chipset(drive, speed); + ide_hwif_t *hwif = HWIF(drive); + struct hpt_info *info = pci_get_drvdata(hwif->pci_dev); + + if (info->chip_type >= HPT370) + return hpt37x_tune_chipset(drive, speed); else /* hpt368: hpt_minimum_revision(dev, 2) */ return hpt36x_tune_chipset(drive, speed); } -static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio) +static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio) { - pio = ide_get_best_pio_mode(drive, 255, pio, NULL); - (void) hpt3xx_tune_chipset(drive, (XFER_PIO_0 + pio)); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); } /* * This allows the configuration of ide_pci chipset registers * for cards that learn about the drive's UDMA, DMA, PIO capabilities - * after the drive is reported by the OS. Initially for designed for + * after the drive is reported by the OS. Initially designed for * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc. * - * check_in_drive_lists(drive, bad_ata66_4) - * check_in_drive_lists(drive, bad_ata66_3) - * check_in_drive_lists(drive, bad_ata33) - * */ -static int config_chipset_for_dma (ide_drive_t *drive) +static int config_chipset_for_dma(ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive)); - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); if (!speed) return 0; - /* If we don't have any timings we can't do a lot */ - if (info->speed == NULL) - return 0; - (void) hpt3xx_tune_chipset(drive, speed); return ide_dma_enable(drive); } -static int hpt3xx_quirkproc (ide_drive_t *drive) +static int hpt3xx_quirkproc(ide_drive_t *drive) { - return ((int) check_in_drive_lists(drive, quirk_drives)); + struct hd_driveid *id = drive->id; + const char **list = quirk_drives; + + while (*list) + if (strstr(id->model, *list++)) + return 1; + return 0; } -static void hpt3xx_intrproc (ide_drive_t *drive) +static void hpt3xx_intrproc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = HWIF(drive); if (drive->quirk_list) return; /* drives in the quirk_list may not like intr setups/cleanups */ - hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG); + hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); } -static void hpt3xx_maskproc (ide_drive_t *drive, int mask) +static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { - ide_hwif_t *hwif = drive->hwif; - struct hpt_info *info = ide_get_hwifdata(hwif); - struct pci_dev *dev = hwif->pci_dev; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = pci_get_drvdata(dev); if (drive->quirk_list) { - if (info->revision >= 3) { - u8 reg5a = 0; - pci_read_config_byte(dev, 0x5a, ®5a); - if (((reg5a & 0x10) >> 4) != mask) - pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10)); + if (info->chip_type >= HPT370) { + u8 scr1 = 0; + + pci_read_config_byte(dev, 0x5a, &scr1); + if (((scr1 & 0x10) >> 4) != mask) { + if (mask) + scr1 |= 0x10; + else + scr1 &= ~0x10; + pci_write_config_byte(dev, 0x5a, scr1); + } } else { - if (mask) { + if (mask) disable_irq(hwif->irq); - } else { - enable_irq(hwif->irq); - } + else + enable_irq (hwif->irq); } - } else { - if (IDE_CONTROL_REG) - hwif->OUTB(mask ? (drive->ctl | 2) : - (drive->ctl & ~2), - IDE_CONTROL_REG); - } + } else + hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2), + IDE_CONTROL_REG); } -static int hpt366_config_drive_xfer_rate (ide_drive_t *drive) +static int hpt366_config_drive_xfer_rate(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = HWIF(drive); struct hd_driveid *id = drive->id; drive->init_speed = 0; if ((id->capability & 1) && drive->autodma) { - - if (ide_use_dma(drive)) { - if (config_chipset_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: - hpt3xx_tune_drive(drive, 5); + hpt3xx_tune_drive(drive, 255); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ @@ -834,31 +757,48 @@ fast_ata_pio: } /* - * This is specific to the HPT366 UDMA bios chipset + * This is specific to the HPT366 UDMA chipset * by HighPoint|Triones Technologies, Inc. */ -static int hpt366_ide_dma_lostirq (ide_drive_t *drive) +static int hpt366_ide_dma_lostirq(ide_drive_t *drive) { - struct pci_dev *dev = HWIF(drive)->pci_dev; - u8 reg50h = 0, reg52h = 0, reg5ah = 0; - - pci_read_config_byte(dev, 0x50, ®50h); - pci_read_config_byte(dev, 0x52, ®52h); - pci_read_config_byte(dev, 0x5a, ®5ah); - printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n", - drive->name, __FUNCTION__, reg50h, reg52h, reg5ah); - if (reg5ah & 0x10) - pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); + struct pci_dev *dev = HWIF(drive)->pci_dev; + u8 mcr1 = 0, mcr3 = 0, scr1 = 0; + + pci_read_config_byte(dev, 0x50, &mcr1); + pci_read_config_byte(dev, 0x52, &mcr3); + pci_read_config_byte(dev, 0x5a, &scr1); + printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", + drive->name, __FUNCTION__, mcr1, mcr3, scr1); + if (scr1 & 0x10) + pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); return __ide_dma_lostirq(drive); } -static void hpt370_clear_engine (ide_drive_t *drive) +static void hpt370_clear_engine(ide_drive_t *drive) { - u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50; - pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37); + ide_hwif_t *hwif = HWIF(drive); + + pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37); udelay(10); } +static void hpt370_irq_timeout(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 bfifo = 0; + u8 dma_cmd; + + pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo); + printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff); + + /* get DMA command mode */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command); + hpt370_clear_engine(drive); +} + static void hpt370_ide_dma_start(ide_drive_t *drive) { #ifdef HPT_RESET_STATE_ENGINE @@ -867,64 +807,35 @@ static void hpt370_ide_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int hpt370_ide_dma_end (ide_drive_t *drive) +static int hpt370_ide_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - u8 dma_stat = hwif->INB(hwif->dma_status); + u8 dma_stat = hwif->INB(hwif->dma_status); if (dma_stat & 0x01) { /* wait a little */ udelay(20); dma_stat = hwif->INB(hwif->dma_status); + if (dma_stat & 0x01) + hpt370_irq_timeout(drive); } - if ((dma_stat & 0x01) != 0) - /* fallthrough */ - (void) HWIF(drive)->ide_dma_timeout(drive); - return __ide_dma_end(drive); } -static void hpt370_lostirq_timeout (ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52; - u8 dma_stat = 0, dma_cmd = 0; - - pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo); - printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo); - hpt370_clear_engine(drive); - /* get dma command mode */ - dma_cmd = hwif->INB(hwif->dma_command); - /* stop dma */ - hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command); - dma_stat = hwif->INB(hwif->dma_status); - /* clear errors */ - hwif->OUTB(dma_stat | 0x6, hwif->dma_status); -} - -static int hpt370_ide_dma_timeout (ide_drive_t *drive) +static int hpt370_ide_dma_timeout(ide_drive_t *drive) { - hpt370_lostirq_timeout(drive); - hpt370_clear_engine(drive); + hpt370_irq_timeout(drive); return __ide_dma_timeout(drive); } -static int hpt370_ide_dma_lostirq (ide_drive_t *drive) -{ - hpt370_lostirq_timeout(drive); - hpt370_clear_engine(drive); - return __ide_dma_lostirq(drive); -} - /* returns 1 if DMA IRQ issued, 0 otherwise */ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u16 bfifo = 0; - u8 reginfo = hwif->channel ? 0x56 : 0x52; - u8 dma_stat; + u8 dma_stat; - pci_read_config_word(hwif->pci_dev, reginfo, &bfifo); + pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo); if (bfifo & 0x1FF) { // printk("%s: %d bytes in FIFO\n", drive->name, bfifo); return 0; @@ -932,7 +843,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) dma_stat = hwif->INB(hwif->dma_status); /* return 1 if INTR asserted */ - if ((dma_stat & 4) == 4) + if (dma_stat & 4) return 1; if (!drive->waiting_for_dma) @@ -941,687 +852,711 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) return 0; } -static int hpt374_ide_dma_end (ide_drive_t *drive) +static int hpt374_ide_dma_end(ide_drive_t *drive) { - struct pci_dev *dev = HWIF(drive)->pci_dev; ide_hwif_t *hwif = HWIF(drive); - u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50; - u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x6a, &bwsr_stat); - pci_read_config_byte(dev, mscreg, &msc_stat); - if ((bwsr_stat & bwsr_mask) == bwsr_mask) - pci_write_config_byte(dev, mscreg, msc_stat|0x30); + struct pci_dev *dev = hwif->pci_dev; + u8 mcr = 0, mcr_addr = hwif->select_data; + u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01; + + pci_read_config_byte(dev, 0x6a, &bwsr); + pci_read_config_byte(dev, mcr_addr, &mcr); + if (bwsr & mask) + pci_write_config_byte(dev, mcr_addr, mcr | 0x30); return __ide_dma_end(drive); } /** - * hpt372n_set_clock - perform clock switching dance - * @drive: Drive to switch - * @mode: Switching mode (0x21 for write, 0x23 otherwise) + * hpt3xxn_set_clock - perform clock switching dance + * @hwif: hwif to switch + * @mode: clocking mode (0x21 for write, 0x23 otherwise) * - * Switch the DPLL clock on the HPT372N devices. This is a - * right mess. + * Switch the DPLL clock on the HPT3xxN devices. This is a right mess. */ - -static void hpt372n_set_clock(ide_drive_t *drive, int mode) + +static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) { - ide_hwif_t *hwif = HWIF(drive); - - /* FIXME: should we check for DMA active and BUG() */ + u8 scr2 = hwif->INB(hwif->dma_master + 0x7b); + + if ((scr2 & 0x7f) == mode) + return; + /* Tristate the bus */ - outb(0x80, hwif->dma_base+0x73); - outb(0x80, hwif->dma_base+0x77); - + hwif->OUTB(0x80, hwif->dma_master + 0x73); + hwif->OUTB(0x80, hwif->dma_master + 0x77); + /* Switch clock and reset channels */ - outb(mode, hwif->dma_base+0x7B); - outb(0xC0, hwif->dma_base+0x79); - - /* Reset state machines */ - outb(0x37, hwif->dma_base+0x70); - outb(0x37, hwif->dma_base+0x74); - + hwif->OUTB(mode, hwif->dma_master + 0x7b); + hwif->OUTB(0xc0, hwif->dma_master + 0x79); + + /* + * Reset the state machines. + * NOTE: avoid accidentally enabling the disabled channels. + */ + hwif->OUTB(hwif->INB(hwif->dma_master + 0x70) | 0x32, + hwif->dma_master + 0x70); + hwif->OUTB(hwif->INB(hwif->dma_master + 0x74) | 0x32, + hwif->dma_master + 0x74); + /* Complete reset */ - outb(0x00, hwif->dma_base+0x79); - + hwif->OUTB(0x00, hwif->dma_master + 0x79); + /* Reconnect channels to bus */ - outb(0x00, hwif->dma_base+0x73); - outb(0x00, hwif->dma_base+0x77); + hwif->OUTB(0x00, hwif->dma_master + 0x73); + hwif->OUTB(0x00, hwif->dma_master + 0x77); } /** - * hpt372n_rw_disk - prepare for I/O + * hpt3xxn_rw_disk - prepare for I/O * @drive: drive for command * @rq: block request structure * - * This is called when a disk I/O is issued to the 372N. + * This is called when a disk I/O is issued to HPT3xxN. * We need it because of the clock switching. */ -static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq) +static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) { - ide_hwif_t *hwif = drive->hwif; - int wantclock; - - wantclock = rq_data_dir(rq) ? 0x23 : 0x21; - - if (hwif->config_data != wantclock) { - hpt372n_set_clock(drive, wantclock); - hwif->config_data = wantclock; - } -} - -/* - * Since SUN Cobalt is attempting to do this operation, I should disclose - * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date - * HOTSWAP ATA Infrastructure. - */ - -static void hpt3xx_reset (ide_drive_t *drive) -{ -} - -static int hpt3xx_tristate (ide_drive_t * drive, int state) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40; - u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53; - - pci_read_config_byte(dev, 0x59, ®59h); - pci_read_config_byte(dev, state_reg, ®XXh); - - if (state) { - (void) ide_do_reset(drive); - pci_write_config_byte(dev, state_reg, regXXh|0x80); - pci_write_config_byte(dev, 0x59, reg59h|reset); - } else { - pci_write_config_byte(dev, 0x59, reg59h & ~(reset)); - pci_write_config_byte(dev, state_reg, regXXh & ~(0x80)); - (void) ide_do_reset(drive); - } - return 0; + hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21); } /* - * set/get power state for a drive. - * turning the power off does the following things: - * 1) soft-reset the drive - * 2) tri-states the ide bus + * Set/get power state for a drive. + * NOTE: affects both drives on each channel. * - * when we turn things back on, we need to re-initialize things. + * When we turn the power back on, we need to re-initialize things. */ #define TRISTATE_BIT 0x8000 -static int hpt370_busproc(ide_drive_t * drive, int state) + +static int hpt3xx_busproc(ide_drive_t *drive, int state) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - u8 tristate = 0, resetmask = 0, bus_reg = 0; - u16 tri_reg; + u8 mcr_addr = hwif->select_data + 2; + u8 resetmask = hwif->channel ? 0x80 : 0x40; + u8 bsr2 = 0; + u16 mcr = 0; hwif->bus_state = state; - if (hwif->channel) { - /* secondary channel */ - tristate = 0x56; - resetmask = 0x80; - } else { - /* primary channel */ - tristate = 0x52; - resetmask = 0x40; - } + /* Grab the status. */ + pci_read_config_word(dev, mcr_addr, &mcr); + pci_read_config_byte(dev, 0x59, &bsr2); - /* grab status */ - pci_read_config_word(dev, tristate, &tri_reg); - pci_read_config_byte(dev, 0x59, &bus_reg); - - /* set the state. we don't set it if we don't need to do so. - * make sure that the drive knows that it has failed if it's off */ + /* + * Set the state. We don't set it if we don't need to do so. + * Make sure that the drive knows that it has failed if it's off. + */ switch (state) { case BUSSTATE_ON: - hwif->drives[0].failures = 0; - hwif->drives[1].failures = 0; - if ((bus_reg & resetmask) == 0) + if (!(bsr2 & resetmask)) return 0; - tri_reg &= ~TRISTATE_BIT; - bus_reg &= ~resetmask; - break; + hwif->drives[0].failures = hwif->drives[1].failures = 0; + + pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask); + pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT); + return 0; case BUSSTATE_OFF: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask)) + if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT)) return 0; - tri_reg &= ~TRISTATE_BIT; - bus_reg |= resetmask; + mcr &= ~TRISTATE_BIT; break; case BUSSTATE_TRISTATE: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask)) + if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT)) return 0; - tri_reg |= TRISTATE_BIT; - bus_reg |= resetmask; + mcr |= TRISTATE_BIT; break; + default: + return -EINVAL; } - pci_write_config_byte(dev, 0x59, bus_reg); - pci_write_config_word(dev, tristate, tri_reg); + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + + pci_write_config_word(dev, mcr_addr, mcr); + pci_write_config_byte(dev, 0x59, bsr2 | resetmask); return 0; } -static void __devinit hpt366_clocking(ide_hwif_t *hwif) +/** + * hpt37x_calibrate_dpll - calibrate the DPLL + * @dev: PCI device + * + * Perform a calibration cycle on the DPLL. + * Returns 1 if this succeeds + */ +static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high) { - u32 reg1 = 0; - struct hpt_info *info = ide_get_hwifdata(hwif); + u32 dpll = (f_high << 16) | f_low | 0x100; + u8 scr2; + int i; - pci_read_config_dword(hwif->pci_dev, 0x40, ®1); + pci_write_config_dword(dev, 0x5c, dpll); - /* detect bus speed by looking at control reg timing: */ - switch((reg1 >> 8) & 7) { - case 5: - info->speed = forty_base_hpt366; - break; - case 9: - info->speed = twenty_five_base_hpt366; - break; - case 7: - default: - info->speed = thirty_three_base_hpt366; + /* Wait for oscillator ready */ + for(i = 0; i < 0x5000; ++i) { + udelay(50); + pci_read_config_byte(dev, 0x5b, &scr2); + if (scr2 & 0x80) break; } + /* See if it stays ready (we'll just bail out if it's not yet) */ + for(i = 0; i < 0x1000; ++i) { + pci_read_config_byte(dev, 0x5b, &scr2); + /* DPLL destabilized? */ + if(!(scr2 & 0x80)) + return 0; + } + /* Turn off tuning, we have the DPLL set */ + pci_read_config_dword (dev, 0x5c, &dpll); + pci_write_config_dword(dev, 0x5c, (dpll & ~0x100)); + return 1; } -static void __devinit hpt37x_clocking(ide_hwif_t *hwif) +static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name) { - struct hpt_info *info = ide_get_hwifdata(hwif); - struct pci_dev *dev = hwif->pci_dev; - int adjust, i; - u16 freq; - u32 pll; - u8 reg5bh; - + struct hpt_info *info = kmalloc(sizeof(struct hpt_info), GFP_KERNEL); + unsigned long io_base = pci_resource_start(dev, 4); + u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ + enum ata_clock clock; + + if (info == NULL) { + printk(KERN_ERR "%s: out of memory!\n", name); + return -ENOMEM; + } + /* - * default to pci clock. make sure MA15/16 are set to output - * to prevent drives having problems with 40-pin cables. Needed - * for some drives such as IBM-DTLA which will not enter ready - * state on reset when PDIAG is a input. - * - * ToDo: should we set 0x21 when using PLL mode ? + * Copy everything from a static "template" structure + * to just allocated per-chip hpt_info structure. */ - pci_write_config_byte(dev, 0x5b, 0x23); + *info = *(struct hpt_info *)pci_get_drvdata(dev); /* - * set up the PLL. we need to adjust it so that it's stable. - * freq = Tpll * 192 / Tpci - * - * Todo. For non x86 should probably check the dword is - * set to 0xABCDExxx indicating the BIOS saved f_CNT + * FIXME: Not portable. Also, why do we enable the ROM in the first place? + * We don't seem to be using it. */ - pci_read_config_word(dev, 0x78, &freq); - freq &= 0x1FF; - + if (dev->resource[PCI_ROM_RESOURCE].start) + pci_write_config_dword(dev, PCI_ROM_ADDRESS, + dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); + pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); + pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + /* - * The 372N uses different PCI clock information and has - * some other complications - * On PCI33 timing we must clock switch - * On PCI66 timing we must NOT use the PCI clock - * - * Currently we always set up the PLL for the 372N + * First, try to estimate the PCI clock frequency... */ - - if(info->flags & IS_372N) - { - printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n"); - if(freq < 0x55) - pll = F_LOW_PCI_33; - else if(freq < 0x70) - pll = F_LOW_PCI_40; - else if(freq < 0x7F) - pll = F_LOW_PCI_50; - else - pll = F_LOW_PCI_66; - - printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll); - - /* We always use the pll not the PCI clock on 372N */ - } - else - { - if(freq < 0x9C) - pll = F_LOW_PCI_33; - else if(freq < 0xb0) - pll = F_LOW_PCI_40; - else if(freq <0xc8) - pll = F_LOW_PCI_50; - else - pll = F_LOW_PCI_66; - - if (pll == F_LOW_PCI_33) { - if (info->revision >= 8) - info->speed = thirty_three_base_hpt374; - else if (info->revision >= 5) - info->speed = thirty_three_base_hpt372; - else if (info->revision >= 4) - info->speed = thirty_three_base_hpt370a; - else - info->speed = thirty_three_base_hpt370; - printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n"); - } else if (pll == F_LOW_PCI_40) { - /* Unsupported */ - } else if (pll == F_LOW_PCI_50) { - if (info->revision >= 8) - info->speed = fifty_base_hpt370a; - else if (info->revision >= 5) - info->speed = fifty_base_hpt372; - else if (info->revision >= 4) - info->speed = fifty_base_hpt370a; - else - info->speed = fifty_base_hpt370a; - printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n"); - } else { - if (info->revision >= 8) { - printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n"); + if (info->chip_type >= HPT370) { + u8 scr1 = 0; + u16 f_cnt = 0; + u32 temp = 0; + + /* Interrupt force enable. */ + pci_read_config_byte(dev, 0x5a, &scr1); + if (scr1 & 0x10) + pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); + + /* + * HighPoint does this for HPT372A. + * NOTE: This register is only writeable via I/O space. + */ + if (info->chip_type == HPT372A) + outb(0x0e, io_base + 0x9c); + + /* + * Default to PCI clock. Make sure MA15/16 are set to output + * to prevent drives having problems with 40-pin cables. + */ + pci_write_config_byte(dev, 0x5b, 0x23); + + /* + * We'll have to read f_CNT value in order to determine + * the PCI clock frequency according to the following ratio: + * + * f_CNT = Fpci * 192 / Fdpll + * + * First try reading the register in which the HighPoint BIOS + * saves f_CNT value before reprogramming the DPLL from its + * default setting (which differs for the various chips). + * NOTE: This register is only accessible via I/O space. + * + * In case the signature check fails, we'll have to resort to + * reading the f_CNT register itself in hopes that nobody has + * touched the DPLL yet... + */ + temp = inl(io_base + 0x90); + if ((temp & 0xFFFFF000) != 0xABCDE000) { + int i; + + printk(KERN_WARNING "%s: no clock data saved by BIOS\n", + name); + + /* Calculate the average value of f_CNT. */ + for (temp = i = 0; i < 128; i++) { + pci_read_config_word(dev, 0x78, &f_cnt); + temp += f_cnt & 0x1ff; + mdelay(1); } - else if (info->revision >= 5) - info->speed = sixty_six_base_hpt372; - else if (info->revision >= 4) - info->speed = sixty_six_base_hpt370a; - else - info->speed = sixty_six_base_hpt370; - printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n"); + f_cnt = temp / 128; + } else + f_cnt = temp & 0x1ff; + + dpll_clk = info->dpll_clk; + pci_clk = (f_cnt * dpll_clk) / 192; + + /* Clamp PCI clock to bands. */ + if (pci_clk < 40) + pci_clk = 33; + else if(pci_clk < 45) + pci_clk = 40; + else if(pci_clk < 55) + pci_clk = 50; + else + pci_clk = 66; + + printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, " + "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk); + } else { + u32 itr1 = 0; + + pci_read_config_dword(dev, 0x40, &itr1); + + /* Detect PCI clock by looking at cmd_high_time. */ + switch((itr1 >> 8) & 0x07) { + case 0x09: + pci_clk = 40; + break; + case 0x05: + pci_clk = 25; + break; + case 0x07: + default: + pci_clk = 33; + break; } } - - /* - * only try the pll if we don't have a table for the clock - * speed that we're running at. NOTE: the internal PLL will - * result in slow reads when using a 33MHz PCI clock. we also - * don't like to use the PLL because it will cause glitches - * on PRST/SRST when the HPT state engine gets reset. - * - * ToDo: Use 66MHz PLL when ATA133 devices are present on a - * 372 device so we can get ATA133 support - */ - if (info->speed) - goto init_hpt37X_done; - info->flags |= PLL_MODE; - + /* Let's assume we'll use PCI clock for the ATA clock... */ + switch (pci_clk) { + case 25: + clock = ATA_CLOCK_25MHZ; + break; + case 33: + default: + clock = ATA_CLOCK_33MHZ; + break; + case 40: + clock = ATA_CLOCK_40MHZ; + break; + case 50: + clock = ATA_CLOCK_50MHZ; + break; + case 66: + clock = ATA_CLOCK_66MHZ; + break; + } + /* - * FIXME: make this work correctly, esp with 372N as per - * reference driver code. + * Only try the DPLL if we don't have a table for the PCI clock that + * we are running at for HPT370/A, always use it for anything newer... * - * adjust PLL based upon PCI clock, enable it, and wait for - * stabilization. + * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI. + * We also don't like using the DPLL because this causes glitches + * on PRST-/SRST- when the state engine gets reset... */ - adjust = 0; - freq = (pll < F_LOW_PCI_50) ? 2 : 4; - while (adjust++ < 6) { - pci_write_config_dword(dev, 0x5c, (freq + pll) << 16 | - pll | 0x100); - - /* wait for clock stabilization */ - for (i = 0; i < 0x50000; i++) { - pci_read_config_byte(dev, 0x5b, ®5bh); - if (reg5bh & 0x80) { - /* spin looking for the clock to destabilize */ - for (i = 0; i < 0x1000; ++i) { - pci_read_config_byte(dev, 0x5b, - ®5bh); - if ((reg5bh & 0x80) == 0) - goto pll_recal; - } - pci_read_config_dword(dev, 0x5c, &pll); - pci_write_config_dword(dev, 0x5c, - pll & ~0x100); - pci_write_config_byte(dev, 0x5b, 0x21); - if (info->revision >= 8) - info->speed = fifty_base_hpt370a; - else if (info->revision >= 5) - info->speed = fifty_base_hpt372; - else if (info->revision >= 4) - info->speed = fifty_base_hpt370a; - else - info->speed = fifty_base_hpt370a; - printk("HPT37X: using 50MHz internal PLL\n"); - goto init_hpt37X_done; - } + if (info->chip_type >= HPT374 || info->settings[clock] == NULL) { + u16 f_low, delta = pci_clk < 50 ? 2 : 4; + int adjust; + + /* + * Select 66 MHz DPLL clock only if UltraATA/133 mode is + * supported/enabled, use 50 MHz DPLL clock otherwise... + */ + if (info->max_mode == 0x04) { + dpll_clk = 66; + clock = ATA_CLOCK_66MHZ; + } else if (dpll_clk) { /* HPT36x chips don't have DPLL */ + dpll_clk = 50; + clock = ATA_CLOCK_50MHZ; } - if (!pci_get_drvdata(dev)) { - printk("No Clock Stabilization!!!\n"); - return; + + if (info->settings[clock] == NULL) { + printk(KERN_ERR "%s: unknown bus timing!\n", name); + kfree(info); + return -EIO; } -pll_recal: - if (adjust & 1) - pll -= (adjust >> 1); - else - pll += (adjust >> 1); - } - -init_hpt37X_done: - if (!info->speed) - printk(KERN_ERR "HPT37X%s: unknown bus timing [%d %d].\n", - (info->flags & IS_372N)?"N":"", pll, freq); - /* reset state engine */ - pci_write_config_byte(dev, 0x50, 0x37); - pci_write_config_byte(dev, 0x54, 0x37); - udelay(100); -} -static int __devinit init_hpt37x(struct pci_dev *dev) -{ - u8 reg5ah; + /* Select the DPLL clock. */ + pci_write_config_byte(dev, 0x5b, 0x21); - pci_read_config_byte(dev, 0x5a, ®5ah); - /* interrupt force enable */ - pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10)); - return 0; -} + /* + * Adjust the DPLL based upon PCI clock, enable it, + * and wait for stabilization... + */ + f_low = (pci_clk * 48) / dpll_clk; -static int __devinit init_hpt366(struct pci_dev *dev) -{ - u32 reg1 = 0; - u8 drive_fast = 0; + for (adjust = 0; adjust < 8; adjust++) { + if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta)) + break; - /* - * Disable the "fast interrupt" prediction. - */ - pci_read_config_byte(dev, 0x51, &drive_fast); - if (drive_fast & 0x80) - pci_write_config_byte(dev, 0x51, drive_fast & ~0x80); - pci_read_config_dword(dev, 0x40, ®1); - - return 0; -} + /* + * See if it'll settle at a fractionally different clock + */ + if (adjust & 1) + f_low -= adjust >> 1; + else + f_low += adjust >> 1; + } + if (adjust == 8) { + printk(KERN_ERR "%s: DPLL did not stabilize!\n", name); + kfree(info); + return -EIO; + } -static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name) -{ - int ret = 0; + printk("%s: using %d MHz DPLL clock\n", name, dpll_clk); + } else { + /* Mark the fact that we're not using the DPLL. */ + dpll_clk = 0; + + printk("%s: using %d MHz PCI clock\n", name, pci_clk); + } /* - * FIXME: Not portable. Also, why do we enable the ROM in the first place? - * We don't seem to be using it. + * Advance the table pointer to a slot which points to the list + * of the register values settings matching the clock being used. */ - if (dev->resource[PCI_ROM_RESOURCE].start) - pci_write_config_dword(dev, PCI_ROM_ADDRESS, - dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); + info->settings += clock; - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); - pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); - pci_write_config_byte(dev, PCI_MAX_LAT, 0x08); + /* Store the clock frequencies. */ + info->dpll_clk = dpll_clk; + info->pci_clk = pci_clk; - if (hpt_revision(dev) >= 3) - ret = init_hpt37x(dev); - else - ret = init_hpt366(dev); + /* Point to this chip's own instance of the hpt_info structure. */ + pci_set_drvdata(dev, info); - if (ret) - return ret; + if (info->chip_type >= HPT370) { + u8 mcr1, mcr4; + + /* + * Reset the state engines. + * NOTE: Avoid accidentally enabling the disabled channels. + */ + pci_read_config_byte (dev, 0x50, &mcr1); + pci_read_config_byte (dev, 0x54, &mcr4); + pci_write_config_byte(dev, 0x50, (mcr1 | 0x32)); + pci_write_config_byte(dev, 0x54, (mcr4 | 0x32)); + udelay(100); + } + + /* + * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in + * the MISC. register to stretch the UltraDMA Tss timing. + * NOTE: This register is only writeable via I/O space. + */ + if (info->chip_type == HPT371N && clock == ATA_CLOCK_66MHZ) + + outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c); return dev->irq; } static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02; - + struct pci_dev *dev = hwif->pci_dev; + struct hpt_info *info = pci_get_drvdata(dev); + int serialize = HPT_SERIALIZE_IO; + u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02; + u8 chip_type = info->chip_type; + u8 new_mcr, old_mcr = 0; + + /* Cache the channel's MISC. control registers' offset */ + hwif->select_data = hwif->channel ? 0x54 : 0x50; + hwif->tuneproc = &hpt3xx_tune_drive; hwif->speedproc = &hpt3xx_tune_chipset; hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; - - if(info->flags & IS_372N) - hwif->rw_disk = &hpt372n_rw_disk; + hwif->busproc = &hpt3xx_busproc; /* - * The HPT37x uses the CBLID pins as outputs for MA15/MA16 - * address lines to access an external eeprom. To read valid - * cable detect state the pins must be enabled as inputs. + * HPT3xxN chips have some complications: + * + * - on 33 MHz PCI we must clock switch + * - on 66 MHz PCI we must NOT use the PCI clock */ - if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) { + if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) { /* - * HPT374 PCI function 1 - * - set bit 15 of reg 0x52 to enable TCBLID as input - * - set bit 15 of reg 0x56 to enable FCBLID as input + * Clock is shared between the channels, + * so we'll have to serialize them... :-( */ - u16 mcr3, mcr6; - pci_read_config_word(dev, 0x52, &mcr3); - pci_read_config_word(dev, 0x56, &mcr6); - pci_write_config_word(dev, 0x52, mcr3 | 0x8000); - pci_write_config_word(dev, 0x56, mcr6 | 0x8000); - /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &ata66); - pci_write_config_word(dev, 0x52, mcr3); - pci_write_config_word(dev, 0x56, mcr6); - } else if (info->revision >= 3) { - /* - * HPT370/372 and 374 pcifn 0 - * - clear bit 0 of 0x5b to enable P/SCBLID as inputs - */ - u8 scr2; - pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, scr2 & ~1); - /* now read cable id register */ - pci_read_config_byte(dev, 0x5a, &ata66); - pci_write_config_byte(dev, 0x5b, scr2); - } else { - pci_read_config_byte(dev, 0x5a, &ata66); + serialize = 1; + hwif->rw_disk = &hpt3xxn_rw_disk; } -#ifdef DEBUG - printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n", - ata66, (ata66 & regmask) ? "33" : "66", - PCI_FUNC(hwif->pci_dev->devfn)); -#endif /* DEBUG */ - -#ifdef HPT_SERIALIZE_IO - /* serialize access to this device */ - if (hwif->mate) + /* Serialize access to this device if needed */ + if (serialize && hwif->mate) hwif->serialized = hwif->mate->serialized = 1; + + /* + * Disable the "fast interrupt" prediction. Don't hold off + * on interrupts. (== 0x01 despite what the docs say) + */ + pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr); + + if (info->chip_type >= HPT374) + new_mcr = old_mcr & ~0x07; + else if (info->chip_type >= HPT370) { + new_mcr = old_mcr; + new_mcr &= ~0x02; + +#ifdef HPT_DELAY_INTERRUPT + new_mcr &= ~0x01; +#else + new_mcr |= 0x01; #endif + } else /* HPT366 and HPT368 */ + new_mcr = old_mcr & ~0x80; - if (info->revision >= 3) { - u8 reg5ah = 0; - pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); - /* - * set up ioctl for power status. - * note: power affects both - * drives on each channel - */ - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt370_busproc; - } else if (info->revision >= 2) { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } else { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } + if (new_mcr != old_mcr) + pci_write_config_byte(dev, hwif->select_data + 1, new_mcr); if (!hwif->dma_base) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; return; } hwif->ultra_mask = 0x7f; hwif->mwdma_mask = 0x07; - if (!(hwif->udma_four)) - hwif->udma_four = ((ata66 & regmask) ? 0 : 1); - hwif->ide_dma_check = &hpt366_config_drive_xfer_rate; - - if (info->revision >= 8) { - hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; - hwif->ide_dma_end = &hpt374_ide_dma_end; - } else if (info->revision >= 5) { - hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; - hwif->ide_dma_end = &hpt374_ide_dma_end; - } else if (info->revision >= 3) { - hwif->dma_start = &hpt370_ide_dma_start; - hwif->ide_dma_end = &hpt370_ide_dma_end; - hwif->ide_dma_timeout = &hpt370_ide_dma_timeout; - hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq; - } else if (info->revision >= 2) - hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; - else - hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; + /* + * The HPT37x uses the CBLID pins as outputs for MA15/MA16 + * address lines to access an external EEPROM. To read valid + * cable detect state the pins must be enabled as inputs. + */ + if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { + /* + * HPT374 PCI function 1 + * - set bit 15 of reg 0x52 to enable TCBLID as input + * - set bit 15 of reg 0x56 to enable FCBLID as input + */ + u8 mcr_addr = hwif->select_data + 2; + u16 mcr; + + pci_read_config_word (dev, mcr_addr, &mcr); + pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); + /* now read cable id register */ + pci_read_config_byte (dev, 0x5a, &scr1); + pci_write_config_word(dev, mcr_addr, mcr); + } else if (chip_type >= HPT370) { + /* + * HPT370/372 and 374 pcifn 0 + * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs + */ + u8 scr2 = 0; + + pci_read_config_byte (dev, 0x5b, &scr2); + pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); + /* now read cable id register */ + pci_read_config_byte (dev, 0x5a, &scr1); + pci_write_config_byte(dev, 0x5b, scr2); + } else + pci_read_config_byte (dev, 0x5a, &scr1); + + if (!hwif->udma_four) + hwif->udma_four = (scr1 & ata66) ? 0 : 1; + + hwif->ide_dma_check = &hpt366_config_drive_xfer_rate; + + if (chip_type >= HPT374) { + hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; + hwif->ide_dma_end = &hpt374_ide_dma_end; + } else if (chip_type >= HPT370) { + hwif->dma_start = &hpt370_ide_dma_start; + hwif->ide_dma_end = &hpt370_ide_dma_end; + hwif->ide_dma_timeout = &hpt370_ide_dma_timeout; + } else + hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq; if (!noautodma) hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; } static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) { - struct hpt_info *info = ide_get_hwifdata(hwif); - u8 masterdma = 0, slavedma = 0; - u8 dma_new = 0, dma_old = 0; - u8 primary = hwif->channel ? 0x4b : 0x43; - u8 secondary = hwif->channel ? 0x4f : 0x47; + struct pci_dev *dev = hwif->pci_dev; + u8 masterdma = 0, slavedma = 0; + u8 dma_new = 0, dma_old = 0; unsigned long flags; if (!dmabase) return; - if(info->speed == NULL) { - printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n"); - return; - } - - dma_old = hwif->INB(dmabase+2); + dma_old = hwif->INB(dmabase + 2); local_irq_save(flags); dma_new = dma_old; - pci_read_config_byte(hwif->pci_dev, primary, &masterdma); - pci_read_config_byte(hwif->pci_dev, secondary, &slavedma); + pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma); + pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma); if (masterdma & 0x30) dma_new |= 0x20; - if (slavedma & 0x30) dma_new |= 0x40; + if ( slavedma & 0x30) dma_new |= 0x40; if (dma_new != dma_old) - hwif->OUTB(dma_new, dmabase+2); + hwif->OUTB(dma_new, dmabase + 2); local_irq_restore(flags); ide_setup_dma(hwif, dmabase, 8); } -/* - * We "borrow" this hook in order to set the data structures - * up early enough before dma or init_hwif calls are made. - */ - -static void __devinit init_iops_hpt366(ide_hwif_t *hwif) +static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d) { - struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL); - unsigned long dmabase = pci_resource_start(hwif->pci_dev, 4); - u8 did, rid; + struct pci_dev *dev2; - if(info == NULL) { - printk(KERN_WARNING "hpt366: out of memory.\n"); - return; - } - ide_set_hwifdata(hwif, info); + if (PCI_FUNC(dev->devfn) & 1) + return -ENODEV; + + pci_set_drvdata(dev, &hpt374); + + if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) { + int ret; - if(dmabase) { - did = inb(dmabase + 0x22); - rid = inb(dmabase + 0x28); + pci_set_drvdata(dev2, &hpt374); - if((did == 4 && rid == 6) || (did == 5 && rid > 1)) - info->flags |= IS_372N; + if (dev2->irq != dev->irq) { + /* FIXME: we need a core pci_set_interrupt() */ + dev2->irq = dev->irq; + printk(KERN_WARNING "%s: PCI config space interrupt " + "fixed.\n", d->name); + } + ret = ide_setup_pci_devices(dev, dev2, d); + if (ret < 0) + pci_dev_put(dev2); + return ret; } + return ide_setup_pci_device(dev, d); +} - info->revision = hpt_revision(hwif->pci_dev); +static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d) +{ + pci_set_drvdata(dev, &hpt372n); - if (info->revision >= 3) - hpt37x_clocking(hwif); - else - hpt366_clocking(hwif); + return ide_setup_pci_device(dev, d); } -static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d) +static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d) { - struct pci_dev *findev = NULL; + struct hpt_info *info; + u8 rev = 0, mcr1 = 0; - if (PCI_FUNC(dev->devfn) & 1) - return -ENODEV; + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + + if (rev > 1) { + d->name = "HPT371N"; + + info = &hpt371n; + } else + info = &hpt371; + + /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + pci_read_config_byte(dev, 0x50, &mcr1); + if (mcr1 & 0x04) + pci_write_config_byte(dev, 0x50, mcr1 & ~0x04); + + pci_set_drvdata(dev, info); + + return ide_setup_pci_device(dev, d); +} + +static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d) +{ + struct hpt_info *info; + u8 rev = 0; + + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + + if (rev > 1) { + d->name = "HPT372N"; + + info = &hpt372n; + } else + info = &hpt372a; + pci_set_drvdata(dev, info); - while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { - if ((findev->vendor == dev->vendor) && - (findev->device == dev->device) && - ((findev->devfn - dev->devfn) == 1) && - (PCI_FUNC(findev->devfn) & 1)) { - if (findev->irq != dev->irq) { - /* FIXME: we need a core pci_set_interrupt() */ - findev->irq = dev->irq; - printk(KERN_WARNING "%s: pci-config space interrupt " - "fixed.\n", d->name); - } - return ide_setup_pci_devices(dev, findev, d); - } - } return ide_setup_pci_device(dev, d); } -static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d) +static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d) { + struct hpt_info *info; + u8 rev = 0; + + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + + if (rev > 1) { + d->name = "HPT302N"; + + info = &hpt302n; + } else + info = &hpt302; + pci_set_drvdata(dev, info); + return ide_setup_pci_device(dev, d); } static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) { - struct pci_dev *findev = NULL; - u8 pin1 = 0, pin2 = 0; - unsigned int class_rev; - char *chipset_names[] = {"HPT366", "HPT366", "HPT368", - "HPT370", "HPT370A", "HPT372", - "HPT372N" }; + struct pci_dev *dev2; + u8 rev = 0; + static char *chipset_names[] = { "HPT366", "HPT366", "HPT368", + "HPT370", "HPT370A", "HPT372", + "HPT372N" }; + static struct hpt_info *info[] = { &hpt36x, &hpt36x, &hpt36x, + &hpt370, &hpt370a, &hpt372, + &hpt372n }; if (PCI_FUNC(dev->devfn) & 1) return -ENODEV; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - if(dev->device == PCI_DEVICE_ID_TTI_HPT372N) - class_rev = 6; + if (rev > 6) + rev = 6; - if(class_rev <= 6) - d->name = chipset_names[class_rev]; - - switch(class_rev) { - case 6: - case 5: - case 4: - case 3: - goto init_single; - default: - break; - } + d->name = chipset_names[rev]; + + pci_set_drvdata(dev, info[rev]); + + if (rev > 2) + goto init_single; d->channels = 1; - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1); - while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { - if ((findev->vendor == dev->vendor) && - (findev->device == dev->device) && - ((findev->devfn - dev->devfn) == 1) && - (PCI_FUNC(findev->devfn) & 1)) { - pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2); - if ((pin1 != pin2) && (dev->irq == findev->irq)) { - d->bootable = ON_BOARD; - printk("%s: onboard version of chipset, " - "pin1=%d pin2=%d\n", d->name, - pin1, pin2); - } - return ide_setup_pci_devices(dev, findev, d); + if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) { + u8 pin1 = 0, pin2 = 0; + int ret; + + pci_set_drvdata(dev2, info[rev]); + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1); + pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2); + if (pin1 != pin2 && dev->irq == dev2->irq) { + d->bootable = ON_BOARD; + printk("%s: onboard version of chipset, pin1=%d pin2=%d\n", + d->name, pin1, pin2); } + ret = ide_setup_pci_devices(dev, dev2, d); + if (ret < 0) + pci_dev_put(dev2); + return ret; } init_single: return ide_setup_pci_device(dev, d); @@ -1632,63 +1567,68 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { .name = "HPT366", .init_setup = init_setup_hpt366, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, .extra = 240 },{ /* 1 */ .name = "HPT372A", - .init_setup = init_setup_hpt37x, + .init_setup = init_setup_hpt372a, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, + .extra = 240 },{ /* 2 */ .name = "HPT302", - .init_setup = init_setup_hpt37x, + .init_setup = init_setup_hpt302, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, + .extra = 240 },{ /* 3 */ .name = "HPT371", - .init_setup = init_setup_hpt37x, + .init_setup = init_setup_hpt371, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, + .extra = 240 },{ /* 4 */ .name = "HPT374", .init_setup = init_setup_hpt374, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, /* 4 */ .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, + .extra = 240 },{ /* 5 */ .name = "HPT372N", - .init_setup = init_setup_hpt37x, + .init_setup = init_setup_hpt372n, .init_chipset = init_chipset_hpt366, - .init_iops = init_iops_hpt366, .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .channels = 2, /* 4 */ .autodma = AUTODMA, + .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .bootable = OFF_BOARD, + .extra = 240 } }; @@ -1699,13 +1639,16 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { * * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. + * + * NOTE: since we'll have to modify some fields of the ide_pci_device_t + * structure depending on the chip's revision, we'd better pass a local + * copy down the call chain... */ - static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - ide_pci_device_t *d = &hpt366_chipsets[id->driver_data]; + ide_pci_device_t d = hpt366_chipsets[id->driver_data]; - return d->init_setup(dev, d); + return d.init_setup(dev, &d); } static struct pci_device_id hpt366_pci_tbl[] = { @@ -1725,7 +1668,7 @@ static struct pci_driver driver = { .probe = hpt366_init_one, }; -static int hpt366_ide_init(void) +static int __init hpt366_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c new file mode 100644 index 0000000..63248b6 --- /dev/null +++ b/drivers/ide/pci/it8213.c @@ -0,0 +1,362 @@ +/* + * ITE 8213 IDE driver + * + * Copyright (C) 2006 Jack Lee + * Copyright (C) 2006 Alan Cox + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +/* + * it8213_ratemask - Compute available modes + * @drive: IDE drive + * + * Compute the available speeds for the devices on the interface. This + * is all modes to ATA133 clipped by drive cable setup. + */ + +static u8 it8213_ratemask (ide_drive_t *drive) +{ + u8 mode = 4; + if (!eighty_ninty_three(drive)) + mode = min_t(u8, mode, 1); + return mode; +} + +/** + * it8213_dma_2_pio - return the PIO mode matching DMA + * @xfer_rate: transfer speed + * + * Returns the nearest equivalent PIO timing for the PIO or DMA + * mode requested by the controller. + */ + +static u8 it8213_dma_2_pio (u8 xfer_rate) { + switch(xfer_rate) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + case XFER_MW_DMA_2: + case XFER_PIO_4: + return 4; + case XFER_MW_DMA_1: + case XFER_PIO_3: + return 3; + case XFER_SW_DMA_2: + case XFER_PIO_2: + return 2; + case XFER_MW_DMA_0: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + case XFER_PIO_1: + case XFER_PIO_0: + case XFER_PIO_SLOW: + default: + return 0; + } +} + +/* + * it8213_tuneproc - tune a drive + * @drive: drive to tune + * @pio: desired PIO mode + * + * Set the interface PIO mode. + */ + +static void it8213_tuneproc (ide_drive_t *drive, u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int is_slave = drive->dn & 1; + int master_port = 0x40; + int slave_port = 0x44; + unsigned long flags; + u16 master_data; + u8 slave_data; + static DEFINE_SPINLOCK(tune_lock); + int control = 0; + + static const u8 timings[][2]= { + { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + + spin_lock_irqsave(&tune_lock, flags); + pci_read_config_word(dev, master_port, &master_data); + + if (pio > 1) + control |= 1; /* Programmable timing on */ + if (drive->media != ide_disk) + control |= 4; /* ATAPI */ + if (pio > 2) + control |= 2; /* IORDY */ + if (is_slave) { + master_data |= 0x4000; + master_data &= ~0x0070; + if (pio > 1) + master_data = master_data | (control << 4); + pci_read_config_byte(dev, slave_port, &slave_data); + slave_data = slave_data & 0xf0; + slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1]; + } else { + master_data &= ~0x3307; + if (pio > 1) + master_data = master_data | control; + master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); + } + pci_write_config_word(dev, master_port, master_data); + if (is_slave) + pci_write_config_byte(dev, slave_port, slave_data); + spin_unlock_irqrestore(&tune_lock, flags); +} + +/** + * it8213_tune_chipset - set controller timings + * @drive: Drive to set up + * @xferspeed: speed we want to achieve + * + * Tune the ITE chipset for the desired mode. If we can't achieve + * the desired mode then tune for a lower one, but ultimately + * make the thing work. + */ + +static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 maslave = 0x40; + u8 speed = ide_rate_filter(it8213_ratemask(drive), xferspeed); + int a_speed = 3 << (drive->dn * 4); + int u_flag = 1 << drive->dn; + int v_flag = 0x01 << drive->dn; + int w_flag = 0x10 << drive->dn; + int u_speed = 0; + u16 reg4042, reg4a; + u8 reg48, reg54, reg55; + + pci_read_config_word(dev, maslave, ®4042); + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_word(dev, 0x4a, ®4a); + pci_read_config_byte(dev, 0x54, ®54); + pci_read_config_byte(dev, 0x55, ®55); + + switch(speed) { + case XFER_UDMA_6: + case XFER_UDMA_4: + case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; + case XFER_UDMA_5: + case XFER_UDMA_3: + case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; + case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; + break; + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_SW_DMA_2: + break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + break; + default: + return -1; + } + + if (speed >= XFER_UDMA_0) { + if (!(reg48 & u_flag)) + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + if (speed >= XFER_UDMA_5) { + pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); + } else { + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + + if ((reg4a & a_speed) != u_speed) + pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); + if (speed > XFER_UDMA_2) { + if (!(reg54 & v_flag)) + pci_write_config_byte(dev, 0x54, reg54 | v_flag); + } else + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + } else { + if (reg48 & u_flag) + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + if (reg4a & a_speed) + pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); + if (reg54 & v_flag) + pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); + if (reg55 & w_flag) + pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); + } + it8213_tuneproc(drive, it8213_dma_2_pio(speed)); + return ide_config_drive_speed(drive, speed); +} + +/* + * config_chipset_for_dma - configure for DMA + * @drive: drive to configure + * + * Called by the IDE layer when it wants the timings set up. + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, it8213_ratemask(drive)); + + if (!speed) + return 0; + + it8213_tune_chipset(drive, speed); + + return ide_dma_enable(drive); +} + +/** + * it8213_configure_drive_for_dma - set up for DMA transfers + * @drive: drive we are going to set up + * + * Set up the drive for DMA, tune the controller and drive as + * required. If the drive isn't suitable for DMA or we hit + * other problems then we will drop down to PIO and set up + * PIO appropriately + */ + +static int it8213_config_drive_for_dma (ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + if (ide_use_dma(drive)) { + if (config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + hwif->speedproc(drive, XFER_PIO_0 + + ide_get_best_pio_mode(drive, 255, 4, NULL)); + + return hwif->ide_dma_off_quietly(drive); +} + +/** + * init_hwif_it8213 - set up hwif structs + * @hwif: interface to set up + * + * We do the basic set up of the interface structure. The IT8212 + * requires several custom handlers so we override the default + * ide DMA handlers appropriately + */ + +static void __devinit init_hwif_it8213(ide_hwif_t *hwif) +{ + u8 reg42h = 0, ata66 = 0; + + hwif->speedproc = &it8213_tune_chipset; + hwif->tuneproc = &it8213_tuneproc; + + hwif->autodma = 0; + + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) + return; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x06; + hwif->swdma_mask = 0x04; + + pci_read_config_byte(hwif->pci_dev, 0x42, ®42h); + ata66 = (reg42h & 0x02) ? 0 : 1; + + hwif->ide_dma_check = &it8213_config_drive_for_dma; + if (!(hwif->udma_four)) + hwif->udma_four = ata66; + + /* + * The BIOS often doesn't set up DMA on this controller + * so we always do it. + */ + if (!noautodma) + hwif->autodma = 1; + + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + + +#define DECLARE_ITE_DEV(name_str) \ + { \ + .name = name_str, \ + .init_hwif = init_hwif_it8213, \ + .channels = 1, \ + .autodma = AUTODMA, \ + .enablebits = {{0x41,0x80,0x80}}, \ + .bootable = ON_BOARD, \ + } + +static ide_pci_device_t it8213_chipsets[] __devinitdata = { + /* 0 */ DECLARE_ITE_DEV("IT8213"), +}; + + +/** + * it8213_init_one - pci layer discovery entry + * @dev: PCI device + * @id: ident table entry + * + * Called by the PCI code when it finds an ITE8213 controller. As + * this device follows the standard interfaces we can use the + * standard helper functions to do almost all the work for us. + */ + +static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]); + return 0; +} + + +static struct pci_device_id it8213_pci_tbl[] = { + { PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, it8213_pci_tbl); + +static struct pci_driver driver = { + .name = "ITE8213_IDE", + .id_table = it8213_pci_tbl, + .probe = it8213_init_one, +}; + +static int __init it8213_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(it8213_ide_init); + +MODULE_AUTHOR("Jack Lee, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for the ITE 8213"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index c1cec23..f07bbbe 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -86,15 +86,16 @@ static int __devinit ata66_jmicron(ide_hwif_t *hwif) { case PORT_PATA0: if (control & (1 << 3)) /* 40/80 pin primary */ - return 1; - return 0; + return 0; + return 1; case PORT_PATA1: if (control5 & (1 << 19)) /* 40/80 pin secondary */ return 0; return 1; case PORT_SATA: - return 1; + break; } + return 1; /* Avoid bogus "control reaches end of non-void function" */ } static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted) @@ -240,11 +241,11 @@ static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_devi } static struct pci_device_id jmicron_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 0}, - { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 1}, - { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 2}, - { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 3}, - { PCI_DEVICE(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 4}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index d95714b..8aaea4e 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -302,7 +302,7 @@ static struct pci_driver driver = { .probe = ns87415_init_one, }; -static int ns87415_ide_init(void) +static int __init ns87415_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 7a7c2ef..22bbf61 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -382,7 +382,7 @@ static struct pci_driver driver = { .probe = opti621_init_one, }; -static int opti621_ide_init(void) +static int __init opti621_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 6c097e8..236a031 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -9,6 +9,7 @@ * Split from: * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002 * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2005-2006 MontaVista Software, Inc. * Portions Copyright (C) 1999 Promise Technology, Inc. * Author: Frank Tiernan (frankt@promise.com) * Released under terms of General Public License @@ -38,6 +39,14 @@ #define PDC202_DEBUG_CABLE 0 +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) +#endif + static const char *pdc_quirk_drives[] = { "QUANTUM FIREBALLlct08 08", "QUANTUM FIREBALLP KA6.4", @@ -50,37 +59,11 @@ static const char *pdc_quirk_drives[] = { NULL }; -#define set_2regs(a, b) \ - do { \ - hwif->OUTB((a + adj), indexreg); \ - hwif->OUTB(b, datareg); \ - } while(0) - -#define set_ultra(a, b, c) \ - do { \ - set_2regs(0x10,(a)); \ - set_2regs(0x11,(b)); \ - set_2regs(0x12,(c)); \ - } while(0) - -#define set_ata2(a, b) \ - do { \ - set_2regs(0x0e,(a)); \ - set_2regs(0x0f,(b)); \ - } while(0) - -#define set_pio(a, b, c) \ - do { \ - set_2regs(0x0c,(a)); \ - set_2regs(0x0d,(b)); \ - set_2regs(0x13,(c)); \ - } while(0) - -static u8 pdcnew_ratemask (ide_drive_t *drive) +static u8 max_dma_rate(struct pci_dev *pdev) { u8 mode; - switch(HWIF(drive)->pci_dev->device) { + switch(pdev->device) { case PCI_DEVICE_ID_PROMISE_20277: case PCI_DEVICE_ID_PROMISE_20276: case PCI_DEVICE_ID_PROMISE_20275: @@ -95,178 +78,327 @@ static u8 pdcnew_ratemask (ide_drive_t *drive) default: return 0; } - if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); + return mode; } -static int check_in_drive_lists (ide_drive_t *drive, const char **list) +static u8 pdcnew_ratemask(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; + u8 mode = max_dma_rate(HWIF(drive)->pci_dev); - if (pdc_quirk_drives == list) { - while (*list) { - if (strstr(id->model, *list++)) { - return 2; - } - } - } else { - while (*list) { - if (!strcmp(*list++,id->model)) { - return 1; - } - } - } - return 0; + if (!eighty_ninty_three(drive)) + mode = min_t(u8, mode, 1); + + return mode; } -static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed) +/** + * get_indexed_reg - Get indexed register + * @hwif: for the port address + * @index: index of the indexed register + */ +static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) { - ide_hwif_t *hwif = HWIF(drive); - unsigned long indexreg = hwif->dma_vendor1; - unsigned long datareg = hwif->dma_vendor3; - u8 thold = 0x10; - u8 adj = (drive->dn%2) ? 0x08 : 0x00; - u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed); - - if (speed == XFER_UDMA_2) { - hwif->OUTB((thold + adj), indexreg); - hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg); - } + u8 value; - switch (speed) { - case XFER_UDMA_7: - speed = XFER_UDMA_6; - case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break; - case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break; - case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break; - case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break; - case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break; - case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break; - case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break; - case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break; - case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break; - case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break; - case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break; - case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break; - case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break; - case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break; - case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break; - default: - ; - } + hwif->OUTB(index, hwif->dma_vendor1); + value = hwif->INB(hwif->dma_vendor3); - return (ide_config_drive_speed(drive, speed)); + DBG("index[%02X] value[%02X]\n", index, value); + return value; } -/* 0 1 2 3 4 5 6 7 8 - * 960, 480, 390, 300, 240, 180, 120, 90, 60 - * 180, 150, 120, 90, 60 - * DMA_Speed - * 180, 120, 90, 90, 90, 60, 30 - * 11, 5, 4, 3, 2, 1, 0 +/** + * set_indexed_reg - Set indexed register + * @hwif: for the port address + * @index: index of the indexed register */ -static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) +static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) { - u8 speed; + hwif->OUTB(index, hwif->dma_vendor1); + hwif->OUTB(value, hwif->dma_vendor3); + DBG("index[%02X] value[%02X]\n", index, value); +} - if (pio == 5) pio = 4; - speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL); +/* + * ATA Timing Tables based on 133 MHz PLL output clock. + * + * If the PLL outputs 100 MHz clock, the ASIC hardware will set + * the timing registers automatically when "set features" command is + * issued to the device. However, if the PLL output clock is 133 MHz, + * the following tables must be used. + */ +static struct pio_timing { + u8 reg0c, reg0d, reg13; +} pio_timings [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; - (void)pdcnew_new_tune_chipset(drive, speed); +static struct mwdma_timing { + u8 reg0e, reg0f; +} mwdma_timings [] = { + { 0xdf, 0x5f }, /* MWDMA mode 0 */ + { 0x6b, 0x27 }, /* MWDMA mode 1 */ + { 0x69, 0x25 }, /* MWDMA mode 2 */ +}; + +static struct udma_timing { + u8 reg10, reg11, reg12; +} udma_timings [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + int err; + + speed = ide_rate_filter(pdcnew_ratemask(drive), speed); + + /* + * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will + * automatically set the timing registers based on 100 MHz PLL output. + */ + err = ide_config_drive_speed(drive, speed); + + /* + * As we set up the PLL to output 133 MHz for UltraDMA/133 capable + * chips, we must override the default register settings... + */ + if (max_dma_rate(hwif->pci_dev) == 4) { + u8 mode = speed & 0x07; + + switch (speed) { + case XFER_UDMA_6: + case XFER_UDMA_5: + case XFER_UDMA_4: + case XFER_UDMA_3: + case XFER_UDMA_2: + case XFER_UDMA_1: + case XFER_UDMA_0: + set_indexed_reg(hwif, 0x10 + adj, + udma_timings[mode].reg10); + set_indexed_reg(hwif, 0x11 + adj, + udma_timings[mode].reg11); + set_indexed_reg(hwif, 0x12 + adj, + udma_timings[mode].reg12); + break; + + case XFER_MW_DMA_2: + case XFER_MW_DMA_1: + case XFER_MW_DMA_0: + set_indexed_reg(hwif, 0x0e + adj, + mwdma_timings[mode].reg0e); + set_indexed_reg(hwif, 0x0f + adj, + mwdma_timings[mode].reg0f); + break; + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + set_indexed_reg(hwif, 0x0c + adj, + pio_timings[mode].reg0c); + set_indexed_reg(hwif, 0x0d + adj, + pio_timings[mode].reg0d); + set_indexed_reg(hwif, 0x13 + adj, + pio_timings[mode].reg13); + break; + default: + printk(KERN_ERR "pdc202xx_new: " + "Unknown speed %d ignored\n", speed); + } + } else if (speed == XFER_UDMA_2) { + /* Set tHOLD bit to 0 if using UDMA mode 2 */ + u8 tmp = get_indexed_reg(hwif, 0x10 + adj); + + set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); + } + + return err; } -static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif) +static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio) { - hwif->OUTB(0x0b, hwif->dma_vendor1); - return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04))); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio); } -static int config_chipset_for_dma (ide_drive_t *drive) + +static u8 pdcnew_cable_detect(ide_hwif_t *hwif) +{ + return get_indexed_reg(hwif, 0x0b) & 0x04; +} + +static int config_chipset_for_dma(ide_drive_t *drive) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = HWIF(drive); - u8 speed = -1; - u8 cable; - - u8 ultra_66 = ((id->dma_ultra & 0x0010) || - (id->dma_ultra & 0x0008)) ? 1 : 0; - - cable = pdcnew_new_cable_detect(hwif); + u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0; + u8 cable = pdcnew_cable_detect(hwif); + u8 speed; if (ultra_66 && cable) { - printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary"); + printk(KERN_WARNING "Warning: %s channel " + "requires an 80-pin cable for operation.\n", + hwif->channel ? "Secondary" : "Primary"); printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name); } if (drive->media != ide_disk) return 0; - if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */ - hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1); - hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3); + + if (id->capability & 4) { + /* + * Set IORDY_EN & PREFETCH_EN (this seems to have + * NO real effect since this register is reloaded + * by hardware when the transfer mode is selected) + */ + u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00; + + tmp = get_indexed_reg(hwif, 0x13 + adj); + set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03); } speed = ide_dma_speed(drive, pdcnew_ratemask(drive)); - if (!(speed)) { - hwif->tuneproc(drive, 5); + if (!speed) return 0; - } (void) hwif->speedproc(drive, speed); return ide_dma_enable(drive); } -static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive) +static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct hd_driveid *id = drive->id; drive->init_speed = 0; - if (id && (id->capability & 1) && drive->autodma) { + if ((id->capability & 1) && drive->autodma) { - if (ide_use_dma(drive)) { - if (config_chipset_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: - hwif->tuneproc(drive, 5); + hwif->tuneproc(drive, 255); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ return 0; } -static int pdcnew_quirkproc (ide_drive_t *drive) +static int pdcnew_quirkproc(ide_drive_t *drive) { - return ((int) check_in_drive_lists(drive, pdc_quirk_drives)); + const char **list, *model = drive->id->model; + + for (list = pdc_quirk_drives; *list != NULL; list++) + if (strstr(model, *list) != NULL) + return 2; + return 0; } -static int pdcnew_ide_dma_lostirq(ide_drive_t *drive) +static void pdcnew_reset(ide_drive_t *drive) { - if (HWIF(drive)->resetproc != NULL) - HWIF(drive)->resetproc(drive); - return __ide_dma_lostirq(drive); + /* + * Deleted this because it is redundant from the caller. + */ + printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", + HWIF(drive)->channel ? "Secondary" : "Primary"); } -static int pdcnew_ide_dma_timeout(ide_drive_t *drive) +/** + * read_counter - Read the byte count registers + * @dma_base: for the port address + */ +static long __devinit read_counter(u32 dma_base) { - if (HWIF(drive)->resetproc != NULL) - HWIF(drive)->resetproc(drive); - return __ide_dma_timeout(drive); + u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; + u8 cnt0, cnt1, cnt2, cnt3; + long count = 0, last; + int retry = 3; + + do { + last = count; + + /* Read the current count */ + outb(0x20, pri_dma_base + 0x01); + cnt0 = inb(pri_dma_base + 0x03); + outb(0x21, pri_dma_base + 0x01); + cnt1 = inb(pri_dma_base + 0x03); + outb(0x20, sec_dma_base + 0x01); + cnt2 = inb(sec_dma_base + 0x03); + outb(0x21, sec_dma_base + 0x01); + cnt3 = inb(sec_dma_base + 0x03); + + count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; + + /* + * The 30-bit decrementing counter is read in 4 pieces. + * Incorrect value may be read when the most significant bytes + * are changing... + */ + } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); + + DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", + cnt0, cnt1, cnt2, cnt3); + + return count; } -static void pdcnew_new_reset (ide_drive_t *drive) +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @dma_base: for the port address + * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. + */ +static long __devinit detect_pll_input_clock(unsigned long dma_base) { + long start_count, end_count; + long pll_input; + u8 scr1; + + start_count = read_counter(dma_base); + + /* Start the test mode */ + outb(0x01, dma_base + 0x01); + scr1 = inb(dma_base + 0x03); + DBG("scr1[%02X]\n", scr1); + outb(scr1 | 0x40, dma_base + 0x03); + + /* Let the counter run for 10 ms. */ + mdelay(10); + + end_count = read_counter(dma_base); + + /* Stop the test mode */ + outb(0x01, dma_base + 0x01); + scr1 = inb(dma_base + 0x03); + DBG("scr1[%02X]\n", scr1); + outb(scr1 & ~0x40, dma_base + 0x03); + /* - * Deleted this because it is redundant from the caller. + * Calculate the input clock in Hz + * (the clock counter is 30 bit wide and counts down) */ - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - HWIF(drive)->channel ? "Secondary" : "Primary"); + pll_input = ((start_count - end_count) & 0x3ffffff) * 100; + + DBG("start[%ld] end[%ld]\n", start_count, end_count); + + return pll_input; } #ifdef CONFIG_PPC_PMAC @@ -274,7 +406,6 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev) { struct device_node *np = pci_device_to_OF_node(pdev); unsigned int class_rev = 0; - void __iomem *mmio; u8 conf; if (np == NULL || !device_is_compatible(np, "kiwi-root")) @@ -285,30 +416,20 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev) if (class_rev >= 0x03) { /* Setup chip magic config stuff (from darwin) */ - pci_read_config_byte(pdev, 0x40, &conf); - pci_write_config_byte(pdev, 0x40, conf | 0x01); + pci_read_config_byte (pdev, 0x40, &conf); + pci_write_config_byte(pdev, 0x40, (conf | 0x01)); } - mmio = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); - - /* Setup some PLL stuffs */ - switch (pdev->device) { - case PCI_DEVICE_ID_PROMISE_20270: - writew(0x0d2b, mmio + 0x1202); - mdelay(30); - break; - case PCI_DEVICE_ID_PROMISE_20271: - writew(0x0826, mmio + 0x1202); - mdelay(30); - break; - } - - iounmap(mmio); } #endif /* CONFIG_PPC_PMAC */ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name) { + unsigned long dma_base = pci_resource_start(dev, 4); + unsigned long sec_dma_base = dma_base + 0x08; + long pll_input, pll_output, ratio; + int f, r; + u8 pll_ctl0, pll_ctl1; + if (dev->resource[PCI_ROM_RESOURCE].start) { pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); @@ -320,6 +441,106 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha apple_kiwi_init(dev); #endif + /* Calculate the required PLL output frequency */ + switch(max_dma_rate(dev)) { + case 4: /* it's 133 MHz for Ultra133 chips */ + pll_output = 133333333; + break; + case 3: /* and 100 MHz for Ultra100 chips */ + default: + pll_output = 100000000; + break; + } + + /* + * Detect PLL input clock. + * On some systems, where PCI bus is running at non-standard clock rate + * (e.g. 25 or 40 MHz), we have to adjust the cycle time. + * PDC20268 and newer chips employ PLL circuit to help correct timing + * registers setting. + */ + pll_input = detect_pll_input_clock(dma_base); + printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000); + + /* Sanity check */ + if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { + printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n", + name, pll_input); + goto out; + } + +#ifdef DEBUG + DBG("pll_output is %ld Hz\n", pll_output); + + /* Show the current clock value of PLL control register + * (maybe already configured by the BIOS) + */ + outb(0x02, sec_dma_base + 0x01); + pll_ctl0 = inb(sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + pll_ctl1 = inb(sec_dma_base + 0x03); + + DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); +#endif + + /* + * Calculate the ratio of F, R and NO + * POUT = (F + 2) / (( R + 2) * NO) + */ + ratio = pll_output / (pll_input / 1000); + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0d */ + r = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + r = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + r = 0x06; + } else if (ratio < 64000L) { /* 64x */ + r = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio); + goto out; + } + + f = (ratio * (r + 2)) / 1000 - 2; + + DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); + + if (unlikely(f < 0 || f > 127)) { + /* Invalid F */ + printk(KERN_ERR "%s: F[%d] invalid!\n", name, f); + goto out; + } + + pll_ctl0 = (u8) f; + pll_ctl1 = (u8) r; + + DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); + + outb(0x02, sec_dma_base + 0x01); + outb(pll_ctl0, sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + outb(pll_ctl1, sec_dma_base + 0x03); + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef DEBUG + /* + * Show the current clock value of PLL control register + */ + outb(0x02, sec_dma_base + 0x01); + pll_ctl0 = inb(sec_dma_base + 0x03); + outb(0x03, sec_dma_base + 0x01); + pll_ctl1 = inb(sec_dma_base + 0x03); + + DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); +#endif + + out: return dev->irq; } @@ -329,8 +550,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->tuneproc = &pdcnew_tune_drive; hwif->quirkproc = &pdcnew_quirkproc; - hwif->speedproc = &pdcnew_new_tune_chipset; - hwif->resetproc = &pdcnew_new_reset; + hwif->speedproc = &pdcnew_tune_chipset; + hwif->resetproc = &pdcnew_reset; hwif->drives[0].autotune = hwif->drives[1].autotune = 1; @@ -340,13 +561,14 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->err_stops_fifo = 1; hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate; - hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq; - hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout; - if (!(hwif->udma_four)) - hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1; + + if (!hwif->udma_four) + hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1; + if (!noautodma) hwif->autodma = 1; hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; + #if PDC202_DEBUG_CABLE printk(KERN_DEBUG "%s: %s-pin cable\n", hwif->name, hwif->udma_four ? "80" : "40"); @@ -362,6 +584,7 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, ide_pci_device_t *d) { struct pci_dev *findev = NULL; + int ret; if ((dev->bus->self && dev->bus->self->vendor == PCI_VENDOR_ID_DEC) && @@ -369,14 +592,16 @@ static int __devinit init_setup_pdc20270(struct pci_dev *dev, if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; d->extra = 0; - while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { + while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) { if ((findev->vendor == dev->vendor) && (findev->device == dev->device) && (PCI_SLOT(findev->devfn) & 2)) { if (findev->irq != dev->irq) { findev->irq = dev->irq; } - return ide_setup_pci_devices(dev, findev, d); + ret = ide_setup_pci_devices(dev, findev, d); + pci_dev_put(findev); + return ret; } } } @@ -491,7 +716,7 @@ static struct pci_driver driver = { .probe = pdc202new_init_one, }; -static int pdc202new_ide_init(void) +static int __init pdc202new_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 184cdac..730e8d1 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -123,26 +123,6 @@ static u8 pdc202xx_ratemask (ide_drive_t *drive) return mode; } -static int check_in_drive_lists (ide_drive_t *drive, const char **list) -{ - struct hd_driveid *id = drive->id; - - if (pdc_quirk_drives == list) { - while (*list) { - if (strstr(id->model, *list++)) { - return 2; - } - } - } else { - while (*list) { - if (!strcmp(*list++,id->model)) { - return 1; - } - } - } - return 0; -} - static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed) { ide_hwif_t *hwif = HWIF(drive); @@ -377,7 +357,12 @@ fast_ata_pio: static int pdc202xx_quirkproc (ide_drive_t *drive) { - return ((int) check_in_drive_lists(drive, pdc_quirk_drives)); + const char **list, *model = drive->id->model; + + for (list = pdc_quirk_drives; *list != NULL; list++) + if (strstr(model, *list) != NULL) + return 2; + return 0; } static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) @@ -719,7 +704,7 @@ static struct pci_driver driver = { .probe = pdc202xx_init_one, }; -static int pdc202xx_ide_init(void) +static int __init pdc202xx_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index cdc3aab..52cfc2a 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -1,13 +1,14 @@ /* - * linux/drivers/ide/pci/piix.c Version 0.44 March 20, 2003 + * linux/drivers/ide/pci/piix.c Version 0.46 December 3, 2006 * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com> * * May be copied or modified under the terms of the GNU General Public License * - * PIO mode setting function for Intel chipsets. + * PIO mode setting function for Intel chipsets. * For use instead of BIOS settings. * * 40-41 @@ -25,7 +26,7 @@ * sitre = word42 & 0x4000; secondary * * 44 8421|8421 hdd|hdb - * + * * 48 8421 hdd|hdc|hdb|hda udma enabled * * 0001 hda @@ -162,7 +163,7 @@ static u8 piix_ratemask (ide_drive_t *drive) * if the drive cannot see an 80pin cable. */ if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); + mode = min_t(u8, mode, 1); return mode; } @@ -215,7 +216,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - int is_slave = (&hwif->drives[1] == drive); + int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; int slave_port = 0x44; unsigned long flags; @@ -224,7 +225,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) static DEFINE_SPINLOCK(tune_lock); int control = 0; - /* ISP RTC */ + /* ISP RTC */ static const u8 timings[][2]= { { 0, 0 }, { 0, 0 }, @@ -232,7 +233,7 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) { 2, 1 }, { 2, 3 }, }; - pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); /* * Master vs slave is synchronized above us but the slave register is @@ -242,25 +243,24 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio) spin_lock_irqsave(&tune_lock, flags); pci_read_config_word(dev, master_port, &master_data); - if (pio >= 2) + if (pio > 1) control |= 1; /* Programmable timing on */ if (drive->media == ide_disk) control |= 4; /* Prefetch, post write */ - if (pio >= 3) + if (pio > 2) control |= 2; /* IORDY */ if (is_slave) { - master_data = master_data | 0x4000; + master_data |= 0x4000; + master_data &= ~0x0070; if (pio > 1) { /* enable PPE, IE and TIME */ master_data = master_data | (control << 4); - } else { - master_data &= ~0x0070; } pci_read_config_byte(dev, slave_port, &slave_data); slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0); slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0)); } else { - master_data = master_data & 0xccf8; + master_data &= ~0x3307; if (pio > 1) { /* enable PPE, IE and TIME */ master_data = master_data | control; @@ -353,56 +353,24 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed) } /** - * piix_faulty_dma0 - check for DMA0 errata - * @hwif: IDE interface to check - * - * If an ICH/ICH0/ICH2 interface is is operating in multi-word - * DMA mode with 600nS cycle time the IDE PIO prefetch buffer will - * inadvertently provide an extra piece of secondary data to the primary - * device resulting in data corruption. - * - * With such a device this test function returns true. This allows - * our tuning code to follow Intel recommendations and use PIO on - * such devices. - */ - -static int piix_faulty_dma0(ide_hwif_t *hwif) -{ - switch(hwif->pci_dev->device) - { - case PCI_DEVICE_ID_INTEL_82801AA_1: /* ICH */ - case PCI_DEVICE_ID_INTEL_82801AB_1: /* ICH0 */ - case PCI_DEVICE_ID_INTEL_82801BA_8: /* ICH2 */ - case PCI_DEVICE_ID_INTEL_82801BA_9: /* ICH2 */ - return 1; - } - return 0; -} - -/** * piix_config_drive_for_dma - configure drive for DMA * @drive: IDE drive to configure * * Set up a PIIX interface channel for the best available speed. - * We prefer UDMA if it is available and then MWDMA. If DMA is - * not available we switch to PIO and return 0. + * We prefer UDMA if it is available and then MWDMA. If DMA is + * not available we switch to PIO and return 0. */ static int piix_config_drive_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, piix_ratemask(drive)); - - /* Some ICH devices cannot support DMA mode 0 */ - if(speed == XFER_MW_DMA_0 && piix_faulty_dma0(HWIF(drive))) - speed = 0; - - /* If no DMA speed was available or the chipset has DMA bugs - then disable DMA and use PIO */ - - if (!speed || no_piix_dma) { - u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); - speed = piix_dma_2_pio(XFER_PIO_0 + tspeed); - } + + /* + * If no DMA speed was available or the chipset has DMA bugs + * then disable DMA and use PIO + */ + if (!speed || no_piix_dma) + return 0; (void) piix_tune_chipset(drive, speed); return ide_dma_enable(drive); @@ -425,17 +393,16 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive) if ((id->capability & 1) && drive->autodma) { - if (ide_use_dma(drive)) { - if (piix_config_drive_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && piix_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: /* Find best PIO mode. */ - hwif->tuneproc(drive, 255); + (void) hwif->speedproc(drive, XFER_PIO_0 + + ide_get_best_pio_mode(drive, 255, 4, NULL)); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ @@ -505,6 +472,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) /* This is a painful system best to let it self tune for now */ return; } + /* ESB2 appears to generate spurious DMA interrupts in PIO mode + when in native mode */ + if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18) + hwif->atapi_irq_bogon = 1; hwif->autodma = 0; hwif->tuneproc = &piix_tune_drive; @@ -567,13 +538,19 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = { /* 0 */ DECLARE_PIIX_DEV("PIIXa"), /* 1 */ DECLARE_PIIX_DEV("PIIXb"), - { /* 2 */ + /* 2 */ + { /* + * MPIIX actually has only a single IDE channel mapped to + * the primary or secondary ports depending on the value + * of the bit 14 of the IDETIM register at offset 0x6c + */ .name = "MPIIX", .init_hwif = init_hwif_piix, .channels = 2, .autodma = NODMA, - .enablebits = {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}}, + .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}}, .bootable = ON_BOARD, + .flags = IDEPCI_FLAG_ISA_PORTS }, /* 3 */ DECLARE_PIIX_DEV("PIIX3"), diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 5f6950c..c185531 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -77,7 +77,7 @@ static struct pci_driver driver = { .probe = rz1000_init_one, }; -static int rz1000_ide_init(void) +static int __init rz1000_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index ff80937..8d762d3 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -507,7 +507,7 @@ static struct pci_driver driver = { #endif }; -static int sc1200_ide_init(void) +static int __init sc1200_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 057548d..ea9a28a 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -666,7 +666,7 @@ static struct pci_driver driver = { .probe = svwks_init_one, }; -static int svwks_ide_init(void) +static int __init svwks_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index cfad09a..b0bf018 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -762,8 +762,7 @@ static struct ioc4_submodule ioc4_ide_submodule = { /* .is_remove = ioc4_ide_remove_one, */ }; -static int __devinit -ioc4_ide_init(void) +static int __init ioc4_ide_init(void) { return ioc4_register_submodule(&ioc4_ide_submodule); } diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 697f566..4ff89c7 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1096,7 +1096,7 @@ static struct pci_driver driver = { .probe = siimage_init_one, }; -static int siimage_ide_init(void) +static int __init siimage_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 92edf76..1afff65 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -800,9 +800,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c if (trueid == 0x5517) { /* SiS 961/961B */ - lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */ + lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */ pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev); pci_read_config_byte(dev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); if (sbrev == 0x10 && (prefctl & 0x80)) { printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); @@ -967,7 +968,7 @@ static struct pci_driver driver = { .probe = sis5513_init_one, }; -static int sis5513_ide_init(void) +static int __init sis5513_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 0b4b604..170a261 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -299,14 +299,14 @@ static void sl82c105_selectproc(ide_drive_t *drive) //DBG(("sl82c105_selectproc(drive:%s)\n", drive->name)); mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16; - old = val = *((u32 *)&hwif->hwif_data); + old = val = (u32)pci_get_drvdata(dev); if (drive->using_dma) val &= ~mask; else val |= mask; if (old != val) { pci_write_config_dword(dev, 0x40, val); - *((u32 *)&hwif->hwif_data) = val; + pci_set_drvdata(dev, (void *)val); } } @@ -316,14 +316,13 @@ static void sl82c105_selectproc(ide_drive_t *drive) */ static void sl82c105_resetproc(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = HWIF(drive)->pci_dev; u32 val; DBG(("sl82c105_resetproc(drive:%s)\n", drive->name)); pci_read_config_dword(dev, 0x40, &val); - *((u32 *)&hwif->hwif_data) = val; + pci_set_drvdata(dev, (void *)val); } /* @@ -394,6 +393,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); + pci_set_drvdata(dev, (void *)val); return dev->irq; } @@ -404,30 +404,25 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) { - struct pci_dev *dev = hwif->pci_dev; unsigned int rev; u8 dma_state; - u32 val; - + DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); hwif->tuneproc = tune_sl82c105; hwif->selectproc = sl82c105_selectproc; hwif->resetproc = sl82c105_resetproc; - - /* Default to PIO 0 for fallback unless tuned otherwise, - * we always autotune PIO, this is done before DMA is - * checked, so there is no risk of accidentally disabling - * DMA - */ + + /* + * Default to PIO 0 for fallback unless tuned otherwise. + * We always autotune PIO, this is done before DMA is checked, + * so there's no risk of accidentally disabling DMA + */ hwif->drives[0].pio_speed = XFER_PIO_0; hwif->drives[0].autotune = 1; - hwif->drives[1].pio_speed = XFER_PIO_1; + hwif->drives[1].pio_speed = XFER_PIO_0; hwif->drives[1].autotune = 1; - pci_read_config_dword(dev, 0x40, &val); - *((u32 *)&hwif->hwif_data) = val; - hwif->atapi_dma = 0; hwif->mwdma_mask = 0; hwif->swdma_mask = 0; @@ -497,7 +492,7 @@ static struct pci_driver driver = { .probe = sl82c105_init_one, }; -static int sl82c105_ide_init(void) +static int __init sl82c105_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 4a1853a..2663ddb 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -1,9 +1,10 @@ /* - * linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002 + * linux/drivers/ide/pci/slc90e66.c Version 0.13 December 30, 2006 * * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com> * - * This a look-a-like variation of the ICH0 PIIX4 Ultra-66, + * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, * but this keeps the ISA-Bridge and slots alive. * */ @@ -25,7 +26,7 @@ static u8 slc90e66_ratemask (ide_drive_t *drive) u8 mode = 2; if (!eighty_ninty_three(drive)) - mode = min(mode, (u8)1); + mode = min_t(u8, mode, 1); return mode; } @@ -64,36 +65,47 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; - int is_slave = (&hwif->drives[1] == drive); + int is_slave = drive->dn & 1; int master_port = hwif->channel ? 0x42 : 0x40; int slave_port = 0x44; unsigned long flags; u16 master_data; u8 slave_data; - /* ISP RTC */ + int control = 0; + /* ISP RTC */ static const u8 timings[][2]= { - { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; + { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; - pio = ide_get_best_pio_mode(drive, pio, 5, NULL); + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); spin_lock_irqsave(&ide_lock, flags); pci_read_config_word(dev, master_port, &master_data); + + if (pio > 1) + control |= 1; /* Programmable timing on */ + if (drive->media == ide_disk) + control |= 4; /* Prefetch, post write */ + if (pio > 2) + control |= 2; /* IORDY */ if (is_slave) { - master_data = master_data | 0x4000; - if (pio > 1) + master_data |= 0x4000; + master_data &= ~0x0070; + if (pio > 1) { /* enable PPE, IE and TIME */ - master_data = master_data | 0x0070; + master_data = master_data | (control << 4); + } pci_read_config_byte(dev, slave_port, &slave_data); slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0); slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0)); } else { - master_data = master_data & 0xccf8; - if (pio > 1) + master_data &= ~0x3307; + if (pio > 1) { /* enable PPE, IE and TIME */ - master_data = master_data | 0x0007; + master_data = master_data | control; + } master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); @@ -158,10 +170,8 @@ static int slc90e66_config_drive_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive)); - if (!(speed)) { - u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL); - speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed); - } + if (!speed) + return 0; (void) slc90e66_tune_chipset(drive, speed); return ide_dma_enable(drive); @@ -174,18 +184,17 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) drive->init_speed = 0; - if (id && (id->capability & 1) && drive->autodma) { + if ((id->capability & 1) && drive->autodma) { - if (ide_use_dma(drive)) { - if (slc90e66_config_drive_for_dma(drive)) - return hwif->ide_dma_on(drive); - } + if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); goto fast_ata_pio; } else if ((id->capability & 8) || (id->field_valid & 2)) { fast_ata_pio: - hwif->tuneproc(drive, 5); + (void) hwif->speedproc(drive, XFER_PIO_0 + + ide_get_best_pio_mode(drive, 255, 4, NULL)); return hwif->ide_dma_off_quietly(drive); } /* IORDY not supported */ @@ -203,7 +212,7 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) hwif->irq = hwif->channel ? 15 : 14; hwif->speedproc = &slc90e66_tune_chipset; - hwif->tuneproc = &slc90e66_tune_drive; + hwif->tuneproc = &slc90e66_tune_drive; pci_read_config_byte(hwif->pci_dev, 0x47, ®47); @@ -215,14 +224,16 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) hwif->atapi_dma = 1; hwif->ultra_mask = 0x1f; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x07; + hwif->mwdma_mask = 0x06; + hwif->swdma_mask = 0x04; - if (!(hwif->udma_four)) + if (!hwif->udma_four) { /* bit[0(1)]: 0:80, 1:40 */ hwif->udma_four = (reg47 & mask) ? 0 : 1; + } hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate; + if (!noautodma) hwif->autodma = 1; hwif->drives[0].autodma = hwif->autodma; @@ -255,7 +266,7 @@ static struct pci_driver driver = { .probe = slc90e66_init_one, }; -static int slc90e66_ide_init(void) +static int __init slc90e66_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c new file mode 100644 index 0000000..2ad72bb --- /dev/null +++ b/drivers/ide/pci/tc86c001.c @@ -0,0 +1,309 @@ +/* + * drivers/ide/pci/tc86c001.c Version 1.00 Dec 12, 2006 + * + * Copyright (C) 2002 Toshiba Corporation + * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/ide.h> + +static inline u8 tc86c001_ratemask(ide_drive_t *drive) +{ + return eighty_ninty_three(drive) ? 2 : 1; +} + +static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); + u16 mode, scr = hwif->INW(scr_port); + + speed = ide_rate_filter(tc86c001_ratemask(drive), speed); + + switch (speed) { + case XFER_UDMA_4: mode = 0x00c0; break; + case XFER_UDMA_3: mode = 0x00b0; break; + case XFER_UDMA_2: mode = 0x00a0; break; + case XFER_UDMA_1: mode = 0x0090; break; + case XFER_UDMA_0: mode = 0x0080; break; + case XFER_MW_DMA_2: mode = 0x0070; break; + case XFER_MW_DMA_1: mode = 0x0060; break; + case XFER_MW_DMA_0: mode = 0x0050; break; + case XFER_PIO_4: mode = 0x0400; break; + case XFER_PIO_3: mode = 0x0300; break; + case XFER_PIO_2: mode = 0x0200; break; + case XFER_PIO_1: mode = 0x0100; break; + case XFER_PIO_0: + default: mode = 0x0000; break; + } + + scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f; + scr |= mode; + hwif->OUTW(scr, scr_port); + + return ide_config_drive_speed(drive, speed); +} + +static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio) +{ + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + (void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio); +} + +/* + * HACKITY HACK + * + * This is a workaround for the limitation 5 of the TC86C001 IDE controller: + * if a DMA transfer terminates prematurely, the controller leaves the device's + * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or + * set the interrupt bit in the DMA status register), thus no PCI interrupt + * will occur until a DMA transfer has been successfully completed. + * + * We work around this by initiating dummy, zero-length DMA transfer on + * a DMA timeout expiration. I found no better way to do this with the current + * IDE core than to temporarily replace a higher level driver's timer expiry + * handler with our own backing up to that handler in case our recovery fails. + */ +static int tc86c001_timer_expiry(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + ide_expiry_t *expiry = ide_get_hwifdata(hwif); + ide_hwgroup_t *hwgroup = HWGROUP(drive); + u8 dma_stat = hwif->INB(hwif->dma_status); + + /* Restore a higher level driver's expiry handler first. */ + hwgroup->expiry = expiry; + + if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */ + unsigned long sc_base = hwif->config_data; + unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); + u8 dma_cmd = hwif->INB(hwif->dma_command); + + printk(KERN_WARNING "%s: DMA interrupt possibly stuck, " + "attempting recovery...\n", drive->name); + + /* Stop DMA */ + hwif->OUTB(dma_cmd & ~0x01, hwif->dma_command); + + /* Setup the dummy DMA transfer */ + hwif->OUTW(0, sc_base + 0x0a); /* Sector Count */ + hwif->OUTW(0, twcr_port); /* Transfer Word Count 1 or 2 */ + + /* Start the dummy DMA transfer */ + hwif->OUTB(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */ + hwif->OUTB(0x01, hwif->dma_command); /* set START_STOPBM */ + + /* + * If an interrupt was pending, it should come thru shortly. + * If not, a higher level driver's expiry handler should + * eventually cause some kind of recovery from the DMA stall. + */ + return WAIT_MIN_SLEEP; + } + + /* Chain to the restored expiry handler if DMA wasn't active. */ + if (likely(expiry != NULL)) + return expiry(drive); + + /* If there was no handler, "emulate" that for ide_timer_expiry()... */ + return -1; +} + +static void tc86c001_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + ide_hwgroup_t *hwgroup = HWGROUP(drive); + unsigned long sc_base = hwif->config_data; + unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); + unsigned long nsectors = hwgroup->rq->nr_sectors; + + /* + * We have to manually load the sector count and size into + * the appropriate system control registers for DMA to work + * with LBA48 and ATAPI devices... + */ + hwif->OUTW(nsectors, sc_base + 0x0a); /* Sector Count */ + hwif->OUTW(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */ + + /* Install our timeout expiry hook, saving the current handler... */ + ide_set_hwifdata(hwif, hwgroup->expiry); + hwgroup->expiry = &tc86c001_timer_expiry; + + ide_dma_start(drive); +} + +static int tc86c001_busproc(ide_drive_t *drive, int state) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long sc_base = hwif->config_data; + u16 scr1; + + /* System Control 1 Register bit 11 (ATA Hard Reset) read */ + scr1 = hwif->INW(sc_base + 0x00); + + switch (state) { + case BUSSTATE_ON: + if (!(scr1 & 0x0800)) + return 0; + scr1 &= ~0x0800; + + hwif->drives[0].failures = hwif->drives[1].failures = 0; + break; + case BUSSTATE_OFF: + if (scr1 & 0x0800) + return 0; + scr1 |= 0x0800; + + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + break; + default: + return -EINVAL; + } + + /* System Control 1 Register bit 11 (ATA Hard Reset) write */ + hwif->OUTW(scr1, sc_base + 0x00); + return 0; +} + +static int config_chipset_for_dma(ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive)); + + if (!speed) + return 0; + + (void) tc86c001_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((id->capability & 1) && drive->autodma) { + + if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + return hwif->ide_dma_on(drive); + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + tc86c001_tune_drive(drive, 255); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) +{ + unsigned long sc_base = pci_resource_start(hwif->pci_dev, 5); + u16 scr1 = hwif->INW(sc_base + 0x00);; + + /* System Control 1 Register bit 15 (Soft Reset) set */ + hwif->OUTW(scr1 | 0x8000, sc_base + 0x00); + + /* System Control 1 Register bit 14 (FIFO Reset) set */ + hwif->OUTW(scr1 | 0x4000, sc_base + 0x00); + + /* System Control 1 Register: reset clear */ + hwif->OUTW(scr1 & ~0xc000, sc_base + 0x00); + + /* Store the system control register base for convenience... */ + hwif->config_data = sc_base; + + hwif->tuneproc = &tc86c001_tune_drive; + hwif->speedproc = &tc86c001_tune_chipset; + hwif->busproc = &tc86c001_busproc; + + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; + + if (!hwif->dma_base) + return; + + /* + * Sector Count Control Register bits 0 and 1 set: + * software sets Sector Count Register for master and slave device + */ + hwif->OUTW(0x0003, sc_base + 0x0c); + + /* Sector Count Register limit */ + hwif->rqsize = 0xffff; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x1f; + hwif->mwdma_mask = 0x07; + + hwif->ide_dma_check = &tc86c001_config_drive_xfer_rate; + hwif->dma_start = &tc86c001_dma_start; + + if (!hwif->udma_four) { + /* + * System Control 1 Register bit 13 (PDIAGN): + * 0=80-pin cable, 1=40-pin cable + */ + scr1 = hwif->INW(sc_base + 0x00); + hwif->udma_four = (scr1 & 0x2000) ? 0 : 1; + } + + if (!noautodma) + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; +} + +static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, + const char *name) +{ + int err = pci_request_region(dev, 5, name); + + if (err) + printk(KERN_ERR "%s: system control regs already in use", name); + return err; +} + +static ide_pci_device_t tc86c001_chipset __devinitdata = { + .name = "TC86C001", + .init_chipset = init_chipset_tc86c001, + .init_hwif = init_hwif_tc86c001, + .channels = 1, + .autodma = AUTODMA, + .bootable = OFF_BOARD +}; + +static int __devinit tc86c001_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &tc86c001_chipset); +} + +static struct pci_device_id tc86c001_pci_tbl[] = { + { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl); + +static struct pci_driver driver = { + .name = "TC86C001", + .id_table = tc86c001_pci_tbl, + .probe = tc86c001_init_one +}; + +static int __init tc86c001_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} +module_init(tc86c001_ide_init); + +MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 56d8493..b13cce1 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -173,7 +173,7 @@ static struct pci_driver driver = { .probe = triflex_init_one, }; -static int triflex_ide_init(void) +static int __init triflex_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 2a28252..174b88c 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -355,7 +355,7 @@ static struct pci_driver driver = { .probe = trm290_init_one, }; -static int trm290_ide_init(void) +static int __init trm290_ide_init(void) { return ide_pci_register_driver(&driver); } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 61f1a96..6fb6e50 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -78,6 +78,8 @@ static struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -123,7 +125,7 @@ struct via82cxxx_dev static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) { struct pci_dev *dev = hwif->pci_dev; - struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); u8 t; if (~vdev->via_config->flags & VIA_BAD_AST) { @@ -162,7 +164,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) static int via_set_drive(ide_drive_t *drive, u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); - struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev); struct ide_timing t, p; unsigned int T, UT; @@ -225,7 +227,7 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); u16 w80 = hwif->udma_four; u16 speed = ide_find_best_mode(drive, @@ -262,6 +264,53 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) return via_config; } +/* + * Check and handle 80-wire cable presence + */ +static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u) +{ + int i; + + switch (vdev->via_config->flags & VIA_UDMA) { + case VIA_UDMA_66: + for (i = 24; i >= 0; i -= 8) + if (((u >> (i & 16)) & 8) && + ((u >> i) & 0x20) && + (((u >> i) & 7) < 2)) { + /* + * 2x PCI clock and + * UDMA w/ < 3T/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_100: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 4))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_133: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 6))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + } +} + /** * init_chipset_via82cxxx - initialization handler * @dev: PCI device @@ -274,14 +323,22 @@ static struct via_isa_bridge *via_config_find(struct pci_dev **isa) static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) { struct pci_dev *isa = NULL; + struct via82cxxx_dev *vdev; struct via_isa_bridge *via_config; u8 t, v; - unsigned int u; + u32 u; + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) { + printk(KERN_ERR "VP_IDE: out of memory :(\n"); + return -ENOMEM; + } + pci_set_drvdata(dev, vdev); /* * Find the ISA bridge to see how good the IDE is. */ - via_config = via_config_find(&isa); + vdev->via_config = via_config = via_config_find(&isa); /* We checked this earlier so if it fails here deeep badness is involved */ @@ -289,16 +346,17 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const BUG_ON(!via_config->id); /* - * Setup or disable Clk66 if appropriate + * Detect cable and configure Clk66 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + + via_cable_detect(vdev, u); if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { /* Enable Clk66 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); } else if (via_config->flags & VIA_BAD_CLK66) { /* Would cause trouble on 596a and 686 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); } @@ -367,75 +425,11 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const return 0; } -/* - * Check and handle 80-wire cable presence - */ -static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev) -{ - unsigned int u; - int i; - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - - switch (vdev->via_config->flags & VIA_UDMA) { - - case VIA_UDMA_66: - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_100: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_133: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - } -} - static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) { - struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev), - GFP_KERNEL); - struct pci_dev *isa = NULL; + struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev); int i; - if (vdev == NULL) { - printk(KERN_ERR "VP_IDE: out of memory :(\n"); - return; - } - - memset(vdev, 0, sizeof(struct via82cxxx_dev)); - ide_set_hwifdata(hwif, vdev); - - vdev->via_config = via_config_find(&isa); - via_cable_detect(hwif->pci_dev, vdev); - hwif->autodma = 0; hwif->tuneproc = &via82cxxx_tune_drive; @@ -512,6 +506,7 @@ static struct pci_device_id via_pci_tbl[] = { { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_SATA_EIDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, via_pci_tbl); @@ -522,7 +517,7 @@ static struct pci_driver driver = { .probe = via_init_one, }; -static int via_ide_init(void) +static int __init via_ide_init(void) { return ide_pci_register_driver(&driver); } |
