summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/siimage.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/siimage.c')
-rw-r--r--drivers/ide/pci/siimage.c42
1 files changed, 4 insertions, 38 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index ce77849..85d0afd 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -311,27 +311,6 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
}
}
-/**
- * siimage_configure_drive_for_dma - set up for DMA transfers
- * @drive: drive we are going to set up
- *
- * Set up the drive for DMA, tune the controller and drive as
- * required. If the drive isn't suitable for DMA or we hit
- * other problems then we will drop down to PIO and set up
- * PIO appropriately
- */
-
-static int siimage_config_drive_for_dma (ide_drive_t *drive)
-{
- if (ide_tune_dma(drive))
- return 0;
-
- if (ide_use_fast_pio(drive))
- ide_set_max_pio(drive);
-
- return -1;
-}
-
/* returns 1 if dma irq issued, 0 otherwise */
static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
@@ -894,8 +873,6 @@ static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
{
- hwif->autodma = 0;
-
hwif->resetproc = &siimage_reset;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;
@@ -925,8 +902,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
if (!is_sata(hwif))
hwif->atapi_dma = 1;
- hwif->ide_dma_check = &siimage_config_drive_for_dma;
-
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_siimage(hwif);
@@ -935,15 +910,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
} else {
hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq;
}
-
- /*
- * The BIOS often doesn't set up DMA on this controller
- * so we always do it.
- */
-
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
}
#define DECLARE_SII_DEV(name_str) \
@@ -978,11 +944,11 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]);
}
-static struct pci_device_id siimage_pci_tbl[] = {
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+static const struct pci_device_id siimage_pci_tbl[] = {
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
- { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 2 },
#endif
{ 0, },
};
OpenPOWER on IntegriCloud