summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/siimage.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/siimage.c')
-rw-r--r--drivers/ide/pci/siimage.c43
1 files changed, 0 insertions, 43 deletions
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 8d624af..b6be1b4 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -370,48 +370,6 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
}
/**
- * sil_sata_busproc - bus isolation IOCTL
- * @drive: drive to isolate/restore
- * @state: bus state to set
- *
- * Used by the SII3112 to handle bus isolation. As this is a
- * SATA controller the work required is quite limited, we
- * just have to clean up the statistics
- */
-
-static int sil_sata_busproc(ide_drive_t * drive, int state)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 stat_config = 0;
- unsigned long addr = siimage_selreg(hwif, 0);
-
- if (hwif->mmio)
- stat_config = readl((void __iomem *)addr);
- else
- pci_read_config_dword(dev, addr, &stat_config);
-
- switch (state) {
- case BUSSTATE_ON:
- hwif->drives[0].failures = 0;
- hwif->drives[1].failures = 0;
- break;
- case BUSSTATE_OFF:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- case BUSSTATE_TRISTATE:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- default:
- return -EINVAL;
- }
- hwif->bus_state = state;
- return 0;
-}
-
-/**
* sil_sata_reset_poll - wait for SATA reset
* @drive: drive we are resetting
*
@@ -818,7 +776,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
if (sata) {
static int first = 1;
- hwif->busproc = &sil_sata_busproc;
hwif->reset_poll = &sil_sata_reset_poll;
hwif->pre_reset = &sil_sata_pre_reset;
hwif->udma_filter = &sil_sata_udma_filter;
OpenPOWER on IntegriCloud