summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/hpt366.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/hpt366.c')
-rw-r--r--drivers/ide/pci/hpt366.c110
1 files changed, 59 insertions, 51 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 5271b24..a194022 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -122,7 +122,6 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
-#include <linux/hdreg.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
@@ -605,14 +604,22 @@ static const struct hpt_info hpt371n __devinitdata = {
static int check_in_drive_list(ide_drive_t *drive, const char **list)
{
- struct hd_driveid *id = drive->id;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
while (*list)
- if (!strcmp(*list++,id->model))
+ if (!strcmp(*list++, m))
return 1;
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
@@ -621,9 +628,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
@@ -649,7 +654,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
case HPT372A:
case HPT372N:
case HPT374 :
- if (ide_dev_is_sata(drive->id))
+ if (ata_id_is_sata(drive->id))
mask &= ~0x0e;
/* Fall thru */
default:
@@ -662,16 +667,14 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
case HPT372A:
case HPT372N:
case HPT374 :
- if (ide_dev_is_sata(drive->id))
+ if (ata_id_is_sata(drive->id))
return 0x00;
/* Fall thru */
default:
@@ -700,8 +703,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
@@ -728,11 +730,11 @@ static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void hpt3xx_quirkproc(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
+ char *m = (char *)&drive->id[ATA_ID_PROD];
const char **list = quirk_drives;
while (*list)
- if (strstr(id->model, *list++)) {
+ if (strstr(m, *list++)) {
drive->quirk_list = 1;
return;
}
@@ -744,8 +746,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
@@ -942,7 +943,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
* Perform a calibration cycle on the DPLL.
* Returns 1 if this succeeds
*/
-static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
+static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
{
u32 dpll = (f_high << 16) | f_low | 0x100;
u8 scr2;
@@ -970,11 +971,40 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
return 1;
}
-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
+static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
{
- unsigned long io_base = pci_resource_start(dev, 4);
struct ide_host *host = pci_get_drvdata(dev);
struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ u8 chip_type = info->chip_type;
+ u8 new_mcr, old_mcr = 0;
+
+ /*
+ * Disable the "fast interrupt" prediction. Don't hold off
+ * on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
+
+ if (chip_type >= HPT374)
+ new_mcr = old_mcr & ~0x07;
+ else if (chip_type >= HPT370) {
+ new_mcr = old_mcr;
+ new_mcr &= ~0x02;
+#ifdef HPT_DELAY_INTERRUPT
+ new_mcr &= ~0x01;
+#else
+ new_mcr |= 0x01;
+#endif
+ } else /* HPT366 and HPT368 */
+ new_mcr = old_mcr & ~0x80;
+
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
+}
+
+static unsigned int init_chipset_hpt366(struct pci_dev *dev)
+{
+ unsigned long io_base = pci_resource_start(dev, 4);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
@@ -1208,17 +1238,18 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
* NOTE: This register is only writeable via I/O space.
*/
if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
-
outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
+ hpt3xx_disable_fast_irq(dev, 0x50);
+ hpt3xx_disable_fast_irq(dev, 0x54);
+
return dev->irq;
}
-static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
@@ -1262,11 +1293,9 @@ static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
- u8 new_mcr, old_mcr = 0;
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
@@ -1289,29 +1318,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Serialize access to this device if needed */
if (serialize && hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
-
- /*
- * Disable the "fast interrupt" prediction. Don't hold off
- * on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
-
- if (info->chip_type >= HPT374)
- new_mcr = old_mcr & ~0x07;
- else if (info->chip_type >= HPT370) {
- new_mcr = old_mcr;
- new_mcr &= ~0x02;
-
-#ifdef HPT_DELAY_INTERRUPT
- new_mcr &= ~0x01;
-#else
- new_mcr |= 0x01;
-#endif
- } else /* HPT366 and HPT368 */
- new_mcr = old_mcr & ~0x80;
-
- if (new_mcr != old_mcr)
- pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
}
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
@@ -1620,7 +1626,9 @@ static struct pci_driver driver = {
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
- .remove = hpt366_remove,
+ .remove = __devexit_p(hpt366_remove),
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
};
static int __init hpt366_ide_init(void)
OpenPOWER on IntegriCloud