summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/hpt34x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/hpt34x.c')
-rw-r--r--drivers/ide/pci/hpt34x.c278
1 files changed, 278 insertions, 0 deletions
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
new file mode 100644
index 0000000..bbde462
--- /dev/null
+++ b/drivers/ide/pci/hpt34x.c
@@ -0,0 +1,278 @@
+/*
+ * linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
+ *
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ *
+ * 00:12.0 Unknown mass storage controller:
+ * Triones Technologies, Inc.
+ * Unknown device 0003 (rev 01)
+ *
+ * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
+ * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
+ * hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010)
+ * hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030)
+ * hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070)
+ * hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0)
+ *
+ * ide-pci.c reference
+ *
+ * Since there are two cards that report almost identically,
+ * the only discernable difference is the values reported in pcicmd.
+ * Booting-BIOS card or HPT363 :: pcicmd == 0x07
+ * Non-bootable card or HPT343 :: pcicmd == 0x05
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define HPT343_DEBUG_DRIVE_INFO 0
+
+static u8 hpt34x_ratemask (ide_drive_t *drive)
+{
+ return 1;
+}
+
+static void hpt34x_clear_chipset (ide_drive_t *drive)
+{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ u32 reg1 = 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
+
+ pci_read_config_dword(dev, 0x44, &reg1);
+ pci_read_config_dword(dev, 0x48, &reg2);
+ tmp1 = ((0x00 << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
+ tmp2 = (reg2 & ~(0x11 << drive->dn));
+ pci_write_config_dword(dev, 0x44, tmp1);
+ pci_write_config_dword(dev, 0x48, tmp2);
+}
+
+static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ u8 speed = ide_rate_filter(hpt34x_ratemask(drive), xferspeed);
+ u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
+ u8 hi_speed, lo_speed;
+
+ hi_speed = speed >> 4;
+ lo_speed = speed & 0x0f;
+
+ if (hi_speed & 7) {
+ hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
+ } else {
+ lo_speed <<= 5;
+ lo_speed >>= 5;
+ }
+
+ pci_read_config_dword(dev, 0x44, &reg1);
+ pci_read_config_dword(dev, 0x48, &reg2);
+ tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
+ tmp2 = ((hi_speed << drive->dn) | reg2);
+ pci_write_config_dword(dev, 0x44, tmp1);
+ pci_write_config_dword(dev, 0x48, tmp2);
+
+#if HPT343_DEBUG_DRIVE_INFO
+ printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
+ " (0x%02x 0x%02x)\n",
+ drive->name, ide_xfer_verbose(speed),
+ drive->dn, reg1, tmp1, reg2, tmp2,
+ hi_speed, lo_speed);
+#endif /* HPT343_DEBUG_DRIVE_INFO */
+
+ return(ide_config_drive_speed(drive, speed));
+}
+
+static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
+{
+ pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ hpt34x_clear_chipset(drive);
+ (void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
+}
+
+/*
+ * This allows the configuration of ide_pci chipset registers
+ * for cards that learn about the drive's UDMA, DMA, PIO capabilities
+ * after the drive is reported by the OS. Initially for designed for
+ * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc.
+ */
+
+static int config_chipset_for_dma (ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, hpt34x_ratemask(drive));
+
+ if (!(speed))
+ return 0;
+
+ hpt34x_clear_chipset(drive);
+ (void) hpt34x_tune_chipset(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ drive->init_speed = 0;
+
+ if (id && (id->capability & 1) && drive->autodma) {
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+#ifndef CONFIG_HPT34X_AUTODMA
+ return hwif->ide_dma_off_quietly(drive);
+#else
+ return hwif->ide_dma_on(drive);
+#endif
+ }
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ hpt34x_tune_drive(drive, 255);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+/*
+ * If the BIOS does not set the IO base addaress to XX00, 343 will fail.
+ */
+#define HPT34X_PCI_INIT_REG 0x80
+
+static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
+{
+ int i = 0;
+ unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
+ unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
+ unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
+ u16 cmd;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+
+ if (cmd & PCI_COMMAND_MEMORY) {
+ if (pci_resource_start(dev, PCI_ROM_RESOURCE)) {
+ pci_write_config_byte(dev, PCI_ROM_ADDRESS,
+ dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
+ printk(KERN_INFO "HPT345: ROM enabled at 0x%08lx\n",
+ dev->resource[PCI_ROM_RESOURCE].start);
+ }
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
+ } else {
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
+ }
+
+ /*
+ * Since 20-23 can be assigned and are R/W, we correct them.
+ */
+ pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
+ for(i=0; i<4; i++) {
+ dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
+ dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
+ dev->resource[i].flags = IORESOURCE_IO;
+ pci_write_config_dword(dev,
+ (PCI_BASE_ADDRESS_0 + (i * 4)),
+ dev->resource[i].start);
+ }
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ local_irq_restore(flags);
+
+ return dev->irq;
+}
+
+static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
+{
+ u16 pcicmd = 0;
+
+ hwif->autodma = 0;
+
+ hwif->tuneproc = &hpt34x_tune_drive;
+ hwif->speedproc = &hpt34x_tune_chipset;
+ hwif->no_dsc = 1;
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ pci_read_config_word(hwif->pci_dev, PCI_COMMAND, &pcicmd);
+
+ if (!hwif->dma_base)
+ return;
+
+ hwif->ultra_mask = 0x07;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x07;
+
+ hwif->ide_dma_check = &hpt34x_config_drive_xfer_rate;
+ if (!noautodma)
+ hwif->autodma = (pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t hpt34x_chipset __devinitdata = {
+ .name = "HPT34X",
+ .init_chipset = init_chipset_hpt34x,
+ .init_hwif = init_hwif_hpt34x,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .bootable = NEVER_BOARD,
+ .extra = 16
+};
+
+static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &hpt34x_chipset;
+ static char *chipset_names[] = {"HPT343", "HPT345"};
+ u16 pcicmd = 0;
+
+ pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
+
+ d->name = chipset_names[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
+ d->bootable = (pcicmd & PCI_COMMAND_MEMORY) ? OFF_BOARD : NEVER_BOARD;
+
+ return ide_setup_pci_device(dev, d);
+}
+
+static struct pci_device_id hpt34x_pci_tbl[] = {
+ { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "HPT34x_IDE",
+ .id_table = hpt34x_pci_tbl,
+ .probe = hpt34x_init_one,
+};
+
+static int hpt34x_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(hpt34x_ide_init);
+
+MODULE_AUTHOR("Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud