diff options
Diffstat (limited to 'drivers/ide/ide.c')
| -rw-r--r-- | drivers/ide/ide.c | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index f3ea5ea..c438cc3 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -16,10 +16,6 @@ * (usually 14 & 15). * There can be up to two drives per interface, as per the ATA-2 spec. * - * Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 - * Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 - * Tertiary: ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64 - * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64 * ... * * From hd.c: @@ -47,80 +43,6 @@ * This was a rewrite of just about everything from hd.c, though some original * code is still sprinkled about. Think of it as a major evolution, with * inspiration from lots of linux users, esp. hamish@zot.apana.org.au - * - * Version 1.0 ALPHA initial code, primary i/f working okay - * Version 1.3 BETA dual i/f on shared irq tested & working! - * Version 1.4 BETA added auto probing for irq(s) - * Version 1.5 BETA added ALPHA (untested) support for IDE cd-roms, - * ... - * Version 5.50 allow values as small as 20 for idebus= - * Version 5.51 force non io_32bit in drive_cmd_intr() - * change delay_10ms() to delay_50ms() to fix problems - * Version 5.52 fix incorrect invalidation of removable devices - * add "hdx=slow" command line option - * Version 5.60 start to modularize the driver; the disk and ATAPI - * drivers can be compiled as loadable modules. - * move IDE probe code to ide-probe.c - * move IDE disk code to ide-disk.c - * add support for generic IDE device subdrivers - * add m68k code from Geert Uytterhoeven - * probe all interfaces by default - * add ioctl to (re)probe an interface - * Version 6.00 use per device request queues - * attempt to optimize shared hwgroup performance - * add ioctl to manually adjust bandwidth algorithms - * add kerneld support for the probe module - * fix bug in ide_error() - * fix bug in the first ide_get_lock() call for Atari - * don't flush leftover data for ATAPI devices - * Version 6.01 clear hwgroup->active while the hwgroup sleeps - * support HDIO_GETGEO for floppies - * Version 6.02 fix ide_ack_intr() call - * check partition table on floppies - * Version 6.03 handle bad status bit sequencing in ide_wait_stat() - * Version 6.10 deleted old entries from this list of updates - * replaced triton.c with ide-dma.c generic PCI DMA - * added support for BIOS-enabled UltraDMA - * rename all "promise" things to "pdc4030" - * fix EZ-DRIVE handling on small disks - * Version 6.11 fix probe error in ide_scan_devices() - * fix ancient "jiffies" polling bugs - * mask all hwgroup interrupts on each irq entry - * Version 6.12 integrate ioctl and proc interfaces - * fix parsing of "idex=" command line parameter - * Version 6.13 add support for ide4/ide5 courtesy rjones@orchestream.com - * Version 6.14 fixed IRQ sharing among PCI devices - * Version 6.15 added SMP awareness to IDE drivers - * Version 6.16 fixed various bugs; even more SMP friendly - * Version 6.17 fix for newest EZ-Drive problem - * Version 6.18 default unpartitioned-disk translation now "BIOS LBA" - * Version 6.19 Re-design for a UNIFORM driver for all platforms, - * model based on suggestions from Russell King and - * Geert Uytterhoeven - * Promise DC4030VL now supported. - * add support for ide6/ide7 - * delay_50ms() changed to ide_delay_50ms() and exported. - * Version 6.20 Added/Fixed Generic ATA-66 support and hwif detection. - * Added hdx=flash to allow for second flash disk - * detection w/o the hang loop. - * Added support for ide8/ide9 - * Added idex=ata66 for the quirky chipsets that are - * ATA-66 compliant, but have yet to determine a method - * of verification of the 80c cable presence. - * Specifically Promise's PDC20262 chipset. - * Version 6.21 Fixing/Fixed SMP spinlock issue with insight from an old - * hat that clarified original low level driver design. - * Version 6.30 Added SMP support; fixed multmode issues. -ml - * Version 6.31 Debug Share INTR's and request queue streaming - * Native ATA-100 support - * Prep for Cascades Project - * Version 7.00alpha First named revision of ide rearrange - * - * Some additional driver compile-time options are in ./include/linux/ide.h - * - * To do, in likely order of completion: - * - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f - * */ #define REVISION "Revision: 7.00alpha2" |
