diff options
Diffstat (limited to 'drivers/ide/cs5520.c')
| -rw-r--r-- | drivers/ide/cs5520.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c new file mode 100644 index 0000000..5efb467 --- /dev/null +++ b/drivers/ide/cs5520.c @@ -0,0 +1,165 @@ +/* + * IDE tuning and bus mastering support for the CS5510/CS5520 + * chipsets + * + * The CS5510/CS5520 are slightly unusual devices. Unlike the + * typical IDE controllers they do bus mastering with the drive in + * PIO mode and smarter silicon. + * + * The practical upshot of this is that we must always tune the + * drive for the right PIO mode. We must also ignore all the blacklists + * and the drive bus mastering DMA information. + * + * *** This driver is strictly experimental *** + * + * (c) Copyright Red Hat Inc 2002 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * For the avoidance of doubt the "preferred form" of this code is one which + * is in an open non patent encumbered format. Where cryptographic key signing + * forms part of the process of creating an executable the information + * including keys needed to generate an equivalently functional executable + * are deemed to be part of the source code. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/dma-mapping.h> + +#define DRV_NAME "cs5520" + +struct pio_clocks +{ + int address; + int assert; + int recovery; +}; + +static struct pio_clocks cs5520_pio_clocks[]={ + {3, 6, 11}, + {2, 5, 6}, + {1, 4, 3}, + {1, 3, 2}, + {1, 2, 1} +}; + +static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *pdev = to_pci_dev(hwif->dev); + int controller = drive->dn > 1 ? 1 : 0; + + /* 8bit CAT/CRT - 8bit command timing for channel */ + pci_write_config_byte(pdev, 0x62 + controller, + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + + /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ + + /* FIXME: should these use address ? */ + /* Data read timing */ + pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); + /* Write command timing */ + pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), + (cs5520_pio_clocks[pio].recovery << 4) | + (cs5520_pio_clocks[pio].assert)); +} + +static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + printk(KERN_ERR "cs55x0: bad ide timing.\n"); + + cs5520_set_pio_mode(drive, 0); +} + +static const struct ide_port_ops cs5520_port_ops = { + .set_pio_mode = cs5520_set_pio_mode, + .set_dma_mode = cs5520_set_dma_mode, +}; + +static const struct ide_port_info cyrix_chipset __devinitdata = { + .name = DRV_NAME, + .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, + .port_ops = &cs5520_port_ops, + .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520, + .pio_mask = ATA_PIO4, +}; + +/* + * The 5510/5520 are a bit weird. They don't quite set up the way + * the PCI helper layer expects so we must do much of the set up + * work longhand. + */ + +static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + const struct ide_port_info *d = &cyrix_chipset; + hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL }; + + ide_setup_pci_noise(dev, d); + + /* We must not grab the entire device, it has 'ISA' space in its + * BARS too and we will freak out other bits of the kernel + */ + if (pci_enable_device_io(dev)) { + printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); + return -ENODEV; + } + pci_set_master(dev); + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_WARNING "%s: No suitable DMA available.\n", + d->name); + return -ENODEV; + } + + /* + * Now the chipset is configured we can let the core + * do all the device setup for us + */ + + ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]); + + return ide_host_add(d, hws, NULL); +} + +static const struct pci_device_id cs5520_pci_tbl[] = { + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); + +static struct pci_driver cs5520_pci_driver = { + .name = "Cyrix_IDE", + .id_table = cs5520_pci_tbl, + .probe = cs5520_init_one, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init cs5520_ide_init(void) +{ + return ide_pci_register_driver(&cs5520_pci_driver); +} + +module_init(cs5520_ide_init); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); +MODULE_LICENSE("GPL"); |
