1 files changed, 29 insertions, 35 deletions

diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e196aef..00587a8 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1,5 +1,4 @@
-/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
- *
+/*
  * Etrax specific IDE functions, like init and PIO-mode setting etc.
  * Almost the entire ide.c is used for the rest of the Etrax ATA driver.
  * Copyright (c) 2000-2005 Axis Communications AB
@@ -673,9 +672,8 @@ static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int);
 static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int);
 static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int);
 static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
-static int cris_dma_on (ide_drive_t *drive);
 
-static void cris_dma_off(ide_drive_t *drive)
+static void cris_dma_host_set(ide_drive_t *drive, int on)
 {
 }
 
@@ -747,9 +745,6 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			strobe = ATA_DMA2_STROBE;
 			hold = ATA_DMA2_HOLD;
 			break;
-		default:
-			BUG();
-			break;
 	}
 
 	if (speed >= XFER_UDMA_0)
@@ -758,13 +753,20 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
 }
 
-void __init
-init_e100_ide (void)
+static const struct ide_port_info cris_port_info __initdata = {
+	.chipset		= ide_etrax100,
+	.host_flags		= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
+	.pio_mask		= ATA_PIO4,
+	.udma_mask		= cris_ultra_mask,
+	.mwdma_mask		= ATA_MWDMA2,
+};
+
+static int __init init_e100_ide(void)
 {
 	hw_regs_t hw;
-	int ide_offsets[IDE_NR_PORTS];
-	int h;
-	int i;
+	int ide_offsets[IDE_NR_PORTS], h, i;
+	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	printk("ide: ETRAX FS built-in ATA DMA controller\n");
 
@@ -774,23 +776,26 @@ init_e100_ide (void)
 	/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
 	ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
 
-	/* first fill in some stuff in the ide_hwifs fields */
+	for (h = 0; h < 4; h++) {
+		ide_hwif_t *hwif = NULL;
 
-	for(h = 0; h < MAX_HWIFS; h++) {
-		ide_hwif_t *hwif = &ide_hwifs[h];
 		ide_setup_ports(&hw, cris_ide_base_address(h),
 		                ide_offsets,
 		                0, 0, cris_ide_ack_intr,
 		                ide_default_irq(0));
-		ide_register_hw(&hw, NULL, 1, &hwif);
+		hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+		if (hwif == NULL)
+			continue;
+		ide_init_port_data(hwif, hwif->index);
+		ide_init_port_hw(hwif, &hw);
 		hwif->mmio = 1;
-		hwif->chipset = ide_etrax100;
 		hwif->set_pio_mode = &cris_set_pio_mode;
 		hwif->set_dma_mode = &cris_set_dma_mode;
 		hwif->ata_input_data = &cris_ide_input_data;
 		hwif->ata_output_data = &cris_ide_output_data;
 		hwif->atapi_input_bytes = &cris_atapi_input_bytes;
 		hwif->atapi_output_bytes = &cris_atapi_output_bytes;
+		hwif->dma_host_set = &cris_dma_host_set;
 		hwif->ide_dma_end = &cris_dma_end;
 		hwif->dma_setup = &cris_dma_setup;
 		hwif->dma_exec_cmd = &cris_dma_exec_cmd;
@@ -801,16 +806,9 @@ init_e100_ide (void)
 		hwif->OUTBSYNC = &cris_ide_outbsync;
 		hwif->INB = &cris_ide_inb;
 		hwif->INW = &cris_ide_inw;
-		hwif->dma_host_off = &cris_dma_off;
-		hwif->dma_host_on = &cris_dma_on;
-		hwif->dma_off_quietly = &cris_dma_off;
 		hwif->cbl = ATA_CBL_PATA40;
-		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-		hwif->pio_mask = ATA_PIO4,
-		hwif->drives[0].autotune = 1;
-		hwif->drives[1].autotune = 1;
-		hwif->ultra_mask = cris_ultra_mask;
-		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
+
+		idx[h] = hwif->index;
 	}
 
 	/* Reset pulse */
@@ -823,14 +821,12 @@ init_e100_ide (void)
 	cris_ide_set_speed(TYPE_PIO, ATA_PIO4_SETUP, ATA_PIO4_STROBE, ATA_PIO4_HOLD);
 	cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
 	cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
-}
 
-static int cris_dma_on (ide_drive_t *drive)
-{
+	ide_device_add(idx, &cris_port_info);
+
 	return 0;
 }
 
-
 static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16)));
 
 /*
@@ -1038,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive)
 
 static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
 {
-	/* set the irq handler which will finish the request when DMA is done */
-	ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL);
-
-	/* issue cmd to drive */
-	cris_ide_outb(command, IDE_COMMAND_REG);
+	ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
 }
 
 static void cris_dma_start(ide_drive_t *drive)
@@ -1062,3 +1054,5 @@ static void cris_dma_start(ide_drive_t *drive)
 		LED_DISK_READ(1);
 	}
 }
+
+module_init(init_e100_ide);