diff options
Diffstat (limited to 'drivers/i2c/chips/it87.c')
| -rw-r--r-- | drivers/i2c/chips/it87.c | 1184 |
1 files changed, 0 insertions, 1184 deletions
diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c deleted file mode 100644 index db20c9e..0000000 --- a/drivers/i2c/chips/it87.c +++ /dev/null @@ -1,1184 +0,0 @@ -/* - it87.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring. - - Supports: IT8705F Super I/O chip w/LPC interface & SMBus - IT8712F Super I/O chip w/LPC interface & SMBus - Sis950 A clone of the IT8705F - - Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> - Largely inspired by lm78.c of the same package - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - djg@pdp8.net David Gesswein 7/18/01 - Modified to fix bug with not all alarms enabled. - Added ability to read battery voltage and select temperature sensor - type at module load time. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <linux/hwmon-sysfs.h> -#include <asm/io.h> - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, - 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_2(it87, it8712); - -#define REG 0x2e /* The register to read/write */ -#define DEV 0x07 /* Register: Logical device select */ -#define VAL 0x2f /* The value to read/write */ -#define PME 0x04 /* The device with the fan registers in it */ -#define DEVID 0x20 /* Register: Device ID */ -#define DEVREV 0x22 /* Register: Device Revision */ - -static inline int -superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -static int superio_inw(int reg) -{ - int val; - outb(reg++, REG); - val = inb(VAL) << 8; - outb(reg, REG); - val |= inb(VAL); - return val; -} - -static inline void -superio_select(void) -{ - outb(DEV, REG); - outb(PME, VAL); -} - -static inline void -superio_enter(void) -{ - outb(0x87, REG); - outb(0x01, REG); - outb(0x55, REG); - outb(0x55, REG); -} - -static inline void -superio_exit(void) -{ - outb(0x02, REG); - outb(0x02, VAL); -} - -#define IT8712F_DEVID 0x8712 -#define IT8705F_DEVID 0x8705 -#define IT87_ACT_REG 0x30 -#define IT87_BASE_REG 0x60 - -/* Update battery voltage after every reading if true */ -static int update_vbat; - -/* Not all BIOSes properly configure the PWM registers */ -static int fix_pwm_polarity; - -/* Chip Type */ - -static u16 chip_type; - -/* Many IT87 constants specified below */ - -/* Length of ISA address segment */ -#define IT87_EXTENT 8 - -/* Where are the ISA address/data registers relative to the base address */ -#define IT87_ADDR_REG_OFFSET 5 -#define IT87_DATA_REG_OFFSET 6 - -/*----- The IT87 registers -----*/ - -#define IT87_REG_CONFIG 0x00 - -#define IT87_REG_ALARM1 0x01 -#define IT87_REG_ALARM2 0x02 -#define IT87_REG_ALARM3 0x03 - -#define IT87_REG_VID 0x0a -#define IT87_REG_FAN_DIV 0x0b - -/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ - -#define IT87_REG_FAN(nr) (0x0d + (nr)) -#define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) -#define IT87_REG_FAN_MAIN_CTRL 0x13 -#define IT87_REG_FAN_CTL 0x14 -#define IT87_REG_PWM(nr) (0x15 + (nr)) - -#define IT87_REG_VIN(nr) (0x20 + (nr)) -#define IT87_REG_TEMP(nr) (0x29 + (nr)) - -#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2) -#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2) -#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2) -#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2) - -#define IT87_REG_I2C_ADDR 0x48 - -#define IT87_REG_VIN_ENABLE 0x50 -#define IT87_REG_TEMP_ENABLE 0x51 - -#define IT87_REG_CHIPID 0x58 - -#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, - 254); -} - -#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) - -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ - ((val)+500)/1000),-128,127)) -#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) - -#define PWM_TO_REG(val) ((val) >> 1) -#define PWM_FROM_REG(val) (((val)&0x7f) << 1) - -static int DIV_TO_REG(int val) -{ - int answer = 0; - while ((val >>= 1) != 0) - answer++; - return answer; -} -#define DIV_FROM_REG(val) (1 << (val)) - - -/* For each registered IT87, we need to keep some data in memory. That - data is pointed to by it87_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new it87 client is - allocated. */ -struct it87_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[9]; /* Register value */ - u8 in_max[9]; /* Register value */ - u8 in_min[9]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u8 temp[3]; /* Register value */ - u8 temp_high[3]; /* Register value */ - u8 temp_low[3]; /* Register value */ - u8 sensor; /* Register value */ - u8 fan_div[3]; /* Register encoding, shifted right */ - u8 vid; /* Register encoding, combined */ - int vrm; - u32 alarms; /* Register encoding, combined */ - u8 fan_main_ctrl; /* Register value */ - u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ -}; - - -static int it87_attach_adapter(struct i2c_adapter *adapter); -static int it87_find(int *address); -static int it87_detect(struct i2c_adapter *adapter, int address, int kind); -static int it87_detach_client(struct i2c_client *client); - -static int it87_read_value(struct i2c_client *client, u8 register); -static int it87_write_value(struct i2c_client *client, u8 register, - u8 value); -static struct it87_data *it87_update_device(struct device *dev); -static int it87_check_pwm(struct i2c_client *client); -static void it87_init_client(struct i2c_client *client, struct it87_data *data); - - -static struct i2c_driver it87_driver = { - .owner = THIS_MODULE, - .name = "it87", - .id = I2C_DRIVERID_IT87, - .flags = I2C_DF_NOTIFY, - .attach_adapter = it87_attach_adapter, - .detach_client = it87_detach_client, -}; - -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); -} - -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MIN(nr), - data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MAX(nr), - data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); - -#define limit_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0); -limit_in_offset(0); -show_in_offset(1); -limit_in_offset(1); -show_in_offset(2); -limit_in_offset(2); -show_in_offset(3); -limit_in_offset(3); -show_in_offset(4); -limit_in_offset(4); -show_in_offset(5); -limit_in_offset(5); -show_in_offset(6); -limit_in_offset(6); -show_in_offset(7); -limit_in_offset(7); -show_in_offset(8); - -/* 3 temperatures */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); -} -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); -} -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); -} -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_high[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_low[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); - up(&data->update_lock); - return count; -} -#define show_temp_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); - -show_temp_offset(1); -show_temp_offset(2); -show_temp_offset(3); - -static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - u8 reg = data->sensor; /* In case the value is updated while we use it */ - - if (reg & (1 << nr)) - return sprintf(buf, "3\n"); /* thermal diode */ - if (reg & (8 << nr)) - return sprintf(buf, "2\n"); /* thermistor */ - return sprintf(buf, "0\n"); /* disabled */ -} -static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - - data->sensor &= ~(1 << nr); - data->sensor &= ~(8 << nr); - /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ - if (val == 3) - data->sensor |= 1 << nr; - else if (val == 2) - data->sensor |= 8 << nr; - else if (val != 0) { - up(&data->update_lock); - return -EINVAL; - } - it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); - up(&data->update_lock); - return count; -} -#define show_sensor_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_sensor, set_sensor, offset - 1); - -show_sensor_offset(1); -show_sensor_offset(2); -show_sensor_offset(3); - -/* 3 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", - FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); -} -static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); -} -static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); -} -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int i, min[3]; - u8 old; - - down(&data->update_lock); - old = it87_read_value(client, IT87_REG_FAN_DIV); - - for (i = 0; i < 3; i++) - min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i])); - - switch (nr) { - case 0: - case 1: - data->fan_div[nr] = DIV_TO_REG(val); - break; - case 2: - if (val < 8) - data->fan_div[nr] = 1; - else - data->fan_div[nr] = 3; - } - val = old & 0x80; - val |= (data->fan_div[0] & 0x07); - val |= (data->fan_div[1] & 0x07) << 3; - if (data->fan_div[2] == 3) - val |= 0x1 << 6; - it87_write_value(client, IT87_REG_FAN_DIV, val); - - for (i = 0; i < 3; i++) { - data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); - it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); - } - up(&data->update_lock); - return count; -} -static ssize_t set_pwm_enable(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - - if (val == 0) { - int tmp; - /* make sure the fan is on when in on/off mode */ - tmp = it87_read_value(client, IT87_REG_FAN_CTL); - it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr)); - /* set on/off mode */ - data->fan_main_ctrl &= ~(1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - } else if (val == 1) { - /* set SmartGuardian mode */ - data->fan_main_ctrl |= (1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - /* set saved pwm value, clear FAN_CTLX PWM mode bit */ - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - } else { - up(&data->update_lock); - return -EINVAL; - } - - up(&data->update_lock); - return count; -} -static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - if (val < 0 || val > 255) - return -EINVAL; - - down(&data->update_lock); - data->manual_pwm_ctl[nr] = val; - if (data->fan_main_ctrl & (1 << nr)) - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); - -#define show_pwm_offset(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm, set_pwm, offset - 1); - -show_pwm_offset(1); -show_pwm_offset(2); -show_pwm_offset(3); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -static ssize_t -show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} -static ssize_t -store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm) - -static ssize_t -show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) - -/* This function is called when: - * it87_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and it87_driver is still present) */ -static int it87_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, it87_detect); -} - -/* SuperIO detection - will change normal_isa[0] if a chip is found */ -static int it87_find(int *address) -{ - int err = -ENODEV; - - superio_enter(); - chip_type = superio_inw(DEVID); - if (chip_type != IT8712F_DEVID - && chip_type != IT8705F_DEVID) - goto exit; - - superio_select(); - if (!(superio_inb(IT87_ACT_REG) & 0x01)) { - pr_info("it87: Device not activated, skipping\n"); - goto exit; - } - - *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1); - if (*address == 0) { - pr_info("it87: Base address not set, skipping\n"); - goto exit; - } - - err = 0; - pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); - -exit: - superio_exit(); - return err; -} - -/* This function is called by i2c_detect */ -int it87_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct it87_data *data; - int err = 0; - const char *name = ""; - int is_isa = i2c_is_isa_adapter(adapter); - int enable_pwm_interface; - - if (!is_isa && - !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto ERROR0; - - /* Reserve the ISA region */ - if (is_isa) - if (!request_region(address, IT87_EXTENT, it87_driver.name)) - goto ERROR0; - - /* Probe whether there is anything available on this address. Already - done for SMBus and Super-I/O clients */ - if (kind < 0) { - if (is_isa && !chip_type) { -#define REALLY_SLOW_IO - /* We need the timeouts for at least some IT87-like chips. But only - if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i - || inb_p(address + 3) != i - || inb_p(address + 7) != i) { - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { - outb_p(i, address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access it87_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR1; - } - memset(data, 0, sizeof(struct it87_data)); - - new_client = &data->client; - if (is_isa) - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &it87_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - if (kind < 0) { - if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) - || (!is_isa - && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) { - err = -ENODEV; - goto ERROR2; - } - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = it87_read_value(new_client, IT87_REG_CHIPID); - if (i == 0x90) { - kind = it87; - if ((is_isa) && (chip_type == IT8712F_DEVID)) - kind = it8712; - } - else { - if (kind == 0) - dev_info(&adapter->dev, - "Ignoring 'force' parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR2; - } - } - - if (kind == it87) { - name = "it87"; - } else if (kind == it8712) { - name = "it8712"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - /* Check PWM configuration */ - enable_pwm_interface = it87_check_pwm(new_client); - - /* Initialize the IT87 chip */ - it87_init_client(new_client, data); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - if (enable_pwm_interface) { - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); - } - - if (data->type == it8712) { - data->vrm = i2c_which_vrm(); - device_create_file_vrm(new_client); - device_create_file_vid(new_client); - } - - return 0; - -ERROR2: - kfree(data); -ERROR1: - if (is_isa) - release_region(address, IT87_EXTENT); -ERROR0: - return err; -} - -static int it87_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if(i2c_is_isa_client(client)) - release_region(client->addr, IT87_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -/* The SMBus locks itself, but ISA access must be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - would slow down the IT87 access and should not be necessary. */ -static int it87_read_value(struct i2c_client *client, u8 reg) -{ - struct it87_data *data = i2c_get_clientdata(client); - - int res; - if (i2c_is_isa_client(client)) { - down(&data->lock); - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - res = inb_p(client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); - return res; - } else - return i2c_smbus_read_byte_data(client, reg); -} - -/* The SMBus locks itself, but ISA access muse be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - would slow down the IT87 access and should not be necessary. */ -static int it87_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - struct it87_data *data = i2c_get_clientdata(client); - - if (i2c_is_isa_client(client)) { - down(&data->lock); - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - outb_p(value, client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); - return 0; - } else - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Return 1 if and only if the PWM interface is safe to use */ -static int it87_check_pwm(struct i2c_client *client) -{ - /* Some BIOSes fail to correctly configure the IT87 fans. All fans off - * and polarity set to active low is sign that this is the case so we - * disable pwm control to protect the user. */ - int tmp = it87_read_value(client, IT87_REG_FAN_CTL); - if ((tmp & 0x87) == 0) { - if (fix_pwm_polarity) { - /* The user asks us to attempt a chip reconfiguration. - * This means switching to active high polarity and - * inverting all fan speed values. */ - int i; - u8 pwm[3]; - - for (i = 0; i < 3; i++) - pwm[i] = it87_read_value(client, - IT87_REG_PWM(i)); - - /* If any fan is in automatic pwm mode, the polarity - * might be correct, as suspicious as it seems, so we - * better don't change anything (but still disable the - * PWM interface). */ - if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { - dev_info(&client->dev, "Reconfiguring PWM to " - "active high polarity\n"); - it87_write_value(client, IT87_REG_FAN_CTL, - tmp | 0x87); - for (i = 0; i < 3; i++) - it87_write_value(client, - IT87_REG_PWM(i), - 0x7f & ~pwm[i]); - return 1; - } - - dev_info(&client->dev, "PWM configuration is " - "too broken to be fixed\n"); - } - - dev_info(&client->dev, "Detected broken BIOS " - "defaults, disabling PWM interface\n"); - return 0; - } else if (fix_pwm_polarity) { - dev_info(&client->dev, "PWM configuration looks " - "sane, won't touch\n"); - } - - return 1; -} - -/* Called when we have found a new IT87. */ -static void it87_init_client(struct i2c_client *client, struct it87_data *data) -{ - int tmp, i; - - /* initialize to sane defaults: - * - if the chip is in manual pwm mode, this will be overwritten with - * the actual settings on the chip (so in this case, initialization - * is not needed) - * - if in automatic or on/off mode, we could switch to manual mode, - * read the registers and set manual_pwm_ctl accordingly, but currently - * this is not implemented, so we initialize to something sane */ - for (i = 0; i < 3; i++) { - data->manual_pwm_ctl[i] = 0xff; - } - - /* Check if temperature channnels are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); - if ((tmp & 0x3f) == 0) { - /* Temp1,Temp3=thermistor; Temp2=thermal diode */ - tmp = (tmp & 0xc0) | 0x2a; - it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); - } - data->sensor = tmp; - - /* Check if voltage monitors are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); - if ((tmp & 0xff) == 0) { - /* Enable all voltage monitors */ - it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); - } - - /* Check if tachometers are reset manually or by some reason */ - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - if ((data->fan_main_ctrl & 0x70) == 0) { - /* Enable all fan tachometers */ - data->fan_main_ctrl |= 0x70; - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - } - - /* Set current fan mode registers and the default settings for the - * other mode registers */ - for (i = 0; i < 3; i++) { - if (data->fan_main_ctrl & (1 << i)) { - /* pwm mode */ - tmp = it87_read_value(client, IT87_REG_PWM(i)); - if (tmp & 0x80) { - /* automatic pwm - not yet implemented, but - * leave the settings made by the BIOS alone - * until a change is requested via the sysfs - * interface */ - } else { - /* manual pwm */ - data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); - } - } - } - - /* Start monitoring */ - it87_write_value(client, IT87_REG_CONFIG, - (it87_read_value(client, IT87_REG_CONFIG) & 0x36) - | (update_vbat ? 0x41 : 0x01)); -} - -static struct it87_data *it87_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - if (update_vbat) { - /* Cleared after each update, so reenable. Value - returned by this read will be previous value */ - it87_write_value(client, IT87_REG_CONFIG, - it87_read_value(client, IT87_REG_CONFIG) | 0x40); - } - for (i = 0; i <= 7; i++) { - data->in[i] = - it87_read_value(client, IT87_REG_VIN(i)); - data->in_min[i] = - it87_read_value(client, IT87_REG_VIN_MIN(i)); - data->in_max[i] = - it87_read_value(client, IT87_REG_VIN_MAX(i)); - } - data->in[8] = - it87_read_value(client, IT87_REG_VIN(8)); - /* Temperature sensor doesn't have limit registers, set - to min and max value */ - data->in_min[8] = 0; - data->in_max[8] = 255; - - for (i = 0; i < 3; i++) { - data->fan[i] = - it87_read_value(client, IT87_REG_FAN(i)); - data->fan_min[i] = - it87_read_value(client, IT87_REG_FAN_MIN(i)); - } - for (i = 0; i < 3; i++) { - data->temp[i] = - it87_read_value(client, IT87_REG_TEMP(i)); - data->temp_high[i] = - it87_read_value(client, IT87_REG_TEMP_HIGH(i)); - data->temp_low[i] = - it87_read_value(client, IT87_REG_TEMP_LOW(i)); - } - - i = it87_read_value(client, IT87_REG_FAN_DIV); - data->fan_div[0] = i & 0x07; - data->fan_div[1] = (i >> 3) & 0x07; - data->fan_div[2] = (i & 0x40) ? 3 : 1; - - data->alarms = - it87_read_value(client, IT87_REG_ALARM1) | - (it87_read_value(client, IT87_REG_ALARM2) << 8) | - (it87_read_value(client, IT87_REG_ALARM3) << 16); - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - - data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ - if (data->type == it8712) { - data->vid = it87_read_value(client, IT87_REG_VID); - data->vid &= 0x1f; - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sm_it87_init(void) -{ - int addr; - - if (!it87_find(&addr)) { - normal_isa[0] = addr; - } - return i2c_add_driver(&it87_driver); -} - -static void __exit sm_it87_exit(void) -{ - i2c_del_driver(&it87_driver); -} - - -MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>"); -MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); -module_param(update_vbat, bool, 0); -MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); -module_param(fix_pwm_polarity, bool, 0); -MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)"); -MODULE_LICENSE("GPL"); - -module_init(sm_it87_init); -module_exit(sm_it87_exit); |
