summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-savage4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-savage4.c')
-rw-r--r--drivers/i2c/busses/i2c-savage4.c205
1 files changed, 205 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
new file mode 100644
index 0000000..092d032
--- /dev/null
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -0,0 +1,205 @@
+/*
+ i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (C) 1998-2003 The LM Sensors Team
+ Alexander Wold <awold@bigfoot.com>
+ Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+ Based on i2c-voodoo3.c.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* This interfaces to the I2C bus of the Savage4 to gain access to
+ the BT869 and possibly other I2C devices. The DDC bus is not
+ yet supported because its register is not memory-mapped.
+ However we leave the DDC code here, commented out, to make
+ it easier to add later.
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* 3DFX defines */
+#define PCI_CHIP_SAVAGE3D 0x8A20
+#define PCI_CHIP_SAVAGE3D_MV 0x8A21
+#define PCI_CHIP_SAVAGE4 0x8A22
+#define PCI_CHIP_SAVAGE2000 0x9102
+#define PCI_CHIP_PROSAVAGE_PM 0x8A25
+#define PCI_CHIP_PROSAVAGE_KM 0x8A26
+#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
+#define PCI_CHIP_SAVAGE_MX 0x8c11
+#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
+#define PCI_CHIP_SAVAGE_IX 0x8c13
+
+#define REG 0xff20 /* Serial Port 1 Register */
+
+/* bit locations in the register */
+#define DDC_ENAB 0x00040000
+#define DDC_SCL_OUT 0x00080000
+#define DDC_SDA_OUT 0x00100000
+#define DDC_SCL_IN 0x00200000
+#define DDC_SDA_IN 0x00400000
+#define I2C_ENAB 0x00000020
+#define I2C_SCL_OUT 0x00000001
+#define I2C_SDA_OUT 0x00000002
+#define I2C_SCL_IN 0x00000008
+#define I2C_SDA_IN 0x00000010
+
+/* initialization states */
+#define INIT2 0x20
+#define INIT3 0x04
+
+/* delays */
+#define CYCLE_DELAY 10
+#define TIMEOUT (HZ / 2)
+
+
+static void __iomem *ioaddr;
+
+/* The sav GPIO registers don't have individual masks for each bit
+ so we always have to read before writing. */
+
+static void bit_savi2c_setscl(void *data, int val)
+{
+ unsigned int r;
+ r = readl(ioaddr + REG);
+ if(val)
+ r |= I2C_SCL_OUT;
+ else
+ r &= ~I2C_SCL_OUT;
+ writel(r, ioaddr + REG);
+ readl(ioaddr + REG); /* flush posted write */
+}
+
+static void bit_savi2c_setsda(void *data, int val)
+{
+ unsigned int r;
+ r = readl(ioaddr + REG);
+ if(val)
+ r |= I2C_SDA_OUT;
+ else
+ r &= ~I2C_SDA_OUT;
+ writel(r, ioaddr + REG);
+ readl(ioaddr + REG); /* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins always remain outputs.
+ We rely on the i2c-algo-bit routines to set the pins high before
+ reading the input from other chips. */
+
+static int bit_savi2c_getscl(void *data)
+{
+ return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
+}
+
+static int bit_savi2c_getsda(void *data)
+{
+ return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
+}
+
+/* Configures the chip */
+
+static int config_s4(struct pci_dev *dev)
+{
+ unsigned long cadr;
+
+ /* map memory */
+ cadr = dev->resource[0].start;
+ cadr &= PCI_BASE_ADDRESS_MEM_MASK;
+ ioaddr = ioremap_nocache(cadr, 0x0080000);
+ if (ioaddr) {
+ /* writel(0x8160, ioaddr + REG2); */
+ writel(0x00000020, ioaddr + REG);
+ dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static struct i2c_algo_bit_data sav_i2c_bit_data = {
+ .setsda = bit_savi2c_setsda,
+ .setscl = bit_savi2c_setscl,
+ .getsda = bit_savi2c_getsda,
+ .getscl = bit_savi2c_getscl,
+ .udelay = CYCLE_DELAY,
+ .mdelay = CYCLE_DELAY,
+ .timeout = TIMEOUT
+};
+
+static struct i2c_adapter savage4_i2c_adapter = {
+ .owner = THIS_MODULE,
+ .name = "I2C Savage4 adapter",
+ .algo_data = &sav_i2c_bit_data,
+};
+
+static struct pci_device_id savage4_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, savage4_ids);
+
+static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int retval;
+
+ retval = config_s4(dev);
+ if (retval)
+ return retval;
+
+ /* set up the sysfs linkage to our parent device */
+ savage4_i2c_adapter.dev.parent = &dev->dev;
+
+ return i2c_bit_add_bus(&savage4_i2c_adapter);
+}
+
+static void __devexit savage4_remove(struct pci_dev *dev)
+{
+ i2c_bit_del_bus(&savage4_i2c_adapter);
+ iounmap(ioaddr);
+}
+
+static struct pci_driver savage4_driver = {
+ .name = "savage4_smbus",
+ .id_table = savage4_ids,
+ .probe = savage4_probe,
+ .remove = __devexit_p(savage4_remove),
+};
+
+static int __init i2c_savage4_init(void)
+{
+ return pci_register_driver(&savage4_driver);
+}
+
+static void __exit i2c_savage4_exit(void)
+{
+ pci_unregister_driver(&savage4_driver);
+}
+
+MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
+ "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_savage4_init);
+module_exit(i2c_savage4_exit);
OpenPOWER on IntegriCloud