summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-savage4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-savage4.c')
-rw-r--r--drivers/i2c/busses/i2c-savage4.c185
1 files changed, 0 insertions, 185 deletions
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
deleted file mode 100644
index 8adf4ab..0000000
--- a/drivers/i2c/busses/i2c-savage4.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
- Copyright (C) 1998-2003 The LM Sensors Team
- Alexander Wold <awold@bigfoot.com>
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- Based on i2c-voodoo3.c.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Savage4 to gain access to
- the BT869 and possibly other I2C devices. The DDC bus is not
- yet supported because its register is not memory-mapped.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* device IDs */
-#define PCI_CHIP_SAVAGE4 0x8A22
-#define PCI_CHIP_SAVAGE2000 0x9102
-
-#define REG 0xff20 /* Serial Port 1 Register */
-
-/* bit locations in the register */
-#define I2C_ENAB 0x00000020
-#define I2C_SCL_OUT 0x00000001
-#define I2C_SDA_OUT 0x00000002
-#define I2C_SCL_IN 0x00000008
-#define I2C_SDA_IN 0x00000010
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The sav GPIO registers don't have individual masks for each bit
- so we always have to read before writing. */
-
-static void bit_savi2c_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if(val)
- r |= I2C_SCL_OUT;
- else
- r &= ~I2C_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_savi2c_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if(val)
- r |= I2C_SDA_OUT;
- else
- r &= ~I2C_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
- We rely on the i2c-algo-bit routines to set the pins high before
- reading the input from other chips. */
-
-static int bit_savi2c_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_savi2c_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-/* Configures the chip */
-
-static int config_s4(struct pci_dev *dev)
-{
- unsigned long cadr;
-
- /* map memory */
- cadr = dev->resource[0].start;
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
- ioaddr = ioremap_nocache(cadr, 0x0080000);
- if (ioaddr) {
- /* writel(0x8160, ioaddr + REG2); */
- writel(0x00000020, ioaddr + REG);
- dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct i2c_algo_bit_data sav_i2c_bit_data = {
- .setsda = bit_savi2c_setsda,
- .setscl = bit_savi2c_setscl,
- .getsda = bit_savi2c_getsda,
- .getscl = bit_savi2c_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter savage4_i2c_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_SAVAGE,
- .name = "I2C Savage4 adapter",
- .algo_data = &sav_i2c_bit_data,
-};
-
-static struct pci_device_id savage4_ids[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
- { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, savage4_ids);
-
-static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = config_s4(dev);
- if (retval)
- return retval;
-
- /* set up the sysfs linkage to our parent device */
- savage4_i2c_adapter.dev.parent = &dev->dev;
-
- return i2c_bit_add_bus(&savage4_i2c_adapter);
-}
-
-static void __devexit savage4_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&savage4_i2c_adapter);
- iounmap(ioaddr);
-}
-
-static struct pci_driver savage4_driver = {
- .name = "savage4_smbus",
- .id_table = savage4_ids,
- .probe = savage4_probe,
- .remove = __devexit_p(savage4_remove),
-};
-
-static int __init i2c_savage4_init(void)
-{
- return pci_register_driver(&savage4_driver);
-}
-
-static void __exit i2c_savage4_exit(void)
-{
- pci_unregister_driver(&savage4_driver);
-}
-
-MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_savage4_init);
-module_exit(i2c_savage4_exit);
OpenPOWER on IntegriCloud