summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-s3c2410.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-s3c2410.c')
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c20
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index d784c76..e93e7d6 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -554,6 +554,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
unsigned long iicstat;
ktime_t start, now;
unsigned long delay;
+ int spins;
/* ensure the stop has been through the bus */
@@ -566,12 +567,23 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
* end of a transaction. However, really slow i2c devices can stretch
* the clock, delaying STOP generation.
*
- * As a compromise between idle detection latency for the normal, fast
- * case, and system load in the slow device case, use an exponential
- * back off in the polling loop, up to 1/10th of the total timeout,
- * then continue to poll at a constant rate up to the timeout.
+ * On slower SoCs this typically happens within a very small number of
+ * instructions so busy wait briefly to avoid scheduling overhead.
*/
+ spins = 3;
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+ while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
+ cpu_relax();
+ iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+ }
+
+ /*
+ * If we do get an appreciable delay as a compromise between idle
+ * detection latency for the normal, fast case, and system load in the
+ * slow device case, use an exponential back off in the polling loop,
+ * up to 1/10th of the total timeout, then continue to poll at a
+ * constant rate up to the timeout.
+ */
delay = 1;
while ((iicstat & S3C2410_IICSTAT_START) &&
ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
OpenPOWER on IntegriCloud