1 files changed, 74 insertions, 65 deletions

diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 3c9d71f..1c440a7 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -49,48 +49,38 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 	int			rc = 0;
 	int			read = (read_write == I2C_SMBUS_READ);
 	int			addrdir = (addr << 1) | read;
+	int			mode, subsize, len;
+	u32			subaddr;
+	u8			*buf;
 	u8			local[2];
 
-	rc = pmac_i2c_open(bus, 0);
-	if (rc)
-		return rc;
+	if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
+		mode = pmac_i2c_mode_std;
+		subsize = 0;
+		subaddr = 0;
+	} else {
+		mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
+		subsize = 1;
+		subaddr = command;
+	}
 
 	switch (size) {
         case I2C_SMBUS_QUICK:
-		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+		buf = NULL;
+		len = 0;
 	    	break;
         case I2C_SMBUS_BYTE:
-		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
-	    	break;
         case I2C_SMBUS_BYTE_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+		buf = &data->byte;
+		len = 1;
 	    	break;
         case I2C_SMBUS_WORD_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
 		if (!read) {
 			local[0] = data->word & 0xff;
 			local[1] = (data->word >> 8) & 0xff;
 		}
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
-		if (rc == 0 && read) {
-			data->word = ((u16)local[1]) << 8;
-			data->word |= local[0];
-		}
+		buf = local;
+		len = 2;
 	    	break;
 
 	/* Note that these are broken vs. the expected smbus API where
@@ -105,28 +95,44 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 	 * a repeat start/addr phase (but not stop in between)
 	 */
         case I2C_SMBUS_BLOCK_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
-				   data->block[0] + 1);
-
+		buf = data->block;
+		len = data->block[0] + 1;
 		break;
 	case I2C_SMBUS_I2C_BLOCK_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command,
-				   &data->block[1], data->block[0]);
+		buf = &data->block[1];
+		len = data->block[0];
 		break;
 
         default:
-	    	rc = -EINVAL;
+		return -EINVAL;
+	}
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
+		return rc;
+	}
+
+	rc = pmac_i2c_setmode(bus, mode);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			mode, rc);
+		goto bail;
 	}
+
+	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
+	if (rc) {
+		dev_err(&adap->dev,
+			"I2C transfer at 0x%02x failed, size %d, err %d\n",
+			addrdir >> 1, size, rc);
+		goto bail;
+	}
+
+	if (size == I2C_SMBUS_WORD_DATA && read) {
+		data->word = ((u16)local[1]) << 8;
+		data->word |= local[0];
+	}
+
  bail:
 	pmac_i2c_close(bus);
 	return rc;
@@ -146,20 +152,33 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 	int			read;
 	int			addrdir;
 
+	if (num != 1) {
+		dev_err(&adap->dev,
+			"Multi-message I2C transactions not supported\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
 	addrdir = (msgs->addr << 1) | read;
-	if (msgs->flags & I2C_M_REV_DIR_ADDR)
-		addrdir ^= 1;
 
 	rc = pmac_i2c_open(bus, 0);
-	if (rc)
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
 		return rc;
+	}
 	rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-	if (rc)
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			pmac_i2c_mode_std, rc);
 		goto bail;
+	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+	if (rc < 0)
+		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
+			rc);
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
@@ -183,19 +202,16 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
 static int __devexit i2c_powermac_remove(struct platform_device *dev)
 {
 	struct i2c_adapter	*adapter = platform_get_drvdata(dev);
-	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adapter);
 	int			rc;
 
 	rc = i2c_del_adapter(adapter);
-	pmac_i2c_detach_adapter(bus, adapter);
-	i2c_set_adapdata(adapter, NULL);
 	/* We aren't that prepared to deal with this... */
 	if (rc)
 		printk(KERN_WARNING
 		       "i2c-powermac.c: Failed to remove bus %s !\n",
 		       adapter->name);
 	platform_set_drvdata(dev, NULL);
-	kfree(adapter);
+	memset(adapter, 0, sizeof(*adapter));
 
 	return 0;
 }
@@ -206,12 +222,12 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
 	struct pmac_i2c_bus *bus = dev->dev.platform_data;
 	struct device_node *parent = NULL;
 	struct i2c_adapter *adapter;
-	char name[32];
 	const char *basename;
 	int rc;
 
 	if (bus == NULL)
 		return -EINVAL;
+	adapter = pmac_i2c_get_adapter(bus);
 
 	/* Ok, now we need to make up a name for the interface that will
 	 * match what we used to do in the past, that is basically the
@@ -237,29 +253,22 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
 	default:
 		return -EINVAL;
 	}
-	snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+	snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
+		 pmac_i2c_get_channel(bus));
 	of_node_put(parent);
 
-	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-	if (adapter == NULL) {
-		printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
-		return -ENOMEM;
-	}
 	platform_set_drvdata(dev, adapter);
-	strcpy(adapter->name, name);
 	adapter->algo = &i2c_powermac_algorithm;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
-	pmac_i2c_attach_adapter(bus, adapter);
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
 		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
-		       "failed\n", name);
-		i2c_set_adapdata(adapter, NULL);
-		pmac_i2c_detach_adapter(bus, adapter);
+		       "failed\n", adapter->name);
+		memset(adapter, 0, sizeof(*adapter));
 	}
 
-	printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
 
 	if (!strncmp(basename, "uni-n", 5)) {
 		struct device_node *np;