summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-i810.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-i810.c')
-rw-r--r--drivers/i2c/busses/i2c-i810.c260
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
new file mode 100644
index 0000000..ef358bd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -0,0 +1,260 @@
+/*
+ i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998, 1999, 2000 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+ Mark D. Studebaker <mdsxyz123@yahoo.com>
+
+ Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
+ Simon Vogl
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+/*
+ This interfaces to the I810/I815 to provide access to
+ the DDC Bus and the I2C Bus.
+
+ SUPPORTED DEVICES PCI ID
+ i810AA 7121
+ i810AB 7123
+ i810E 7125
+ i815 1132
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <asm/io.h>
+
+/* GPIO register locations */
+#define I810_IOCONTROL_OFFSET 0x5000
+#define I810_HVSYNC 0x00 /* not used */
+#define I810_GPIOA 0x10
+#define I810_GPIOB 0x14
+
+/* bit locations in the registers */
+#define SCL_DIR_MASK 0x0001
+#define SCL_DIR 0x0002
+#define SCL_VAL_MASK 0x0004
+#define SCL_VAL_OUT 0x0008
+#define SCL_VAL_IN 0x0010
+#define SDA_DIR_MASK 0x0100
+#define SDA_DIR 0x0200
+#define SDA_VAL_MASK 0x0400
+#define SDA_VAL_OUT 0x0800
+#define SDA_VAL_IN 0x1000
+
+/* initialization states */
+#define INIT1 0x1
+#define INIT2 0x2
+#define INIT3 0x4
+
+/* delays */
+#define CYCLE_DELAY 10
+#define TIMEOUT (HZ / 2)
+
+static void __iomem *ioaddr;
+
+/* The i810 GPIO registers have individual masks for each bit
+ so we never have to read before writing. Nice. */
+
+static void bit_i810i2c_setscl(void *data, int val)
+{
+ writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
+ ioaddr + I810_GPIOB);
+ readl(ioaddr + I810_GPIOB); /* flush posted write */
+}
+
+static void bit_i810i2c_setsda(void *data, int val)
+{
+ writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
+ ioaddr + I810_GPIOB);
+ readl(ioaddr + I810_GPIOB); /* flush posted write */
+}
+
+/* The GPIO pins are open drain, so the pins could always remain outputs.
+ However, some chip versions don't latch the inputs unless they
+ are set as inputs.
+ We rely on the i2c-algo-bit routines to set the pins high before
+ reading the input from other chips. Following guidance in the 815
+ prog. ref. guide, we do a "dummy write" of 0 to the register before
+ reading which forces the input value to be latched. We presume this
+ applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
+ i2c_algo_bit bit_test=1 to pass. */
+
+static int bit_i810i2c_getscl(void *data)
+{
+ writel(SCL_DIR_MASK, ioaddr + I810_GPIOB);
+ writel(0, ioaddr + I810_GPIOB);
+ return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN));
+}
+
+static int bit_i810i2c_getsda(void *data)
+{
+ writel(SDA_DIR_MASK, ioaddr + I810_GPIOB);
+ writel(0, ioaddr + I810_GPIOB);
+ return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN));
+}
+
+static void bit_i810ddc_setscl(void *data, int val)
+{
+ writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
+ ioaddr + I810_GPIOA);
+ readl(ioaddr + I810_GPIOA); /* flush posted write */
+}
+
+static void bit_i810ddc_setsda(void *data, int val)
+{
+ writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
+ ioaddr + I810_GPIOA);
+ readl(ioaddr + I810_GPIOA); /* flush posted write */
+}
+
+static int bit_i810ddc_getscl(void *data)
+{
+ writel(SCL_DIR_MASK, ioaddr + I810_GPIOA);
+ writel(0, ioaddr + I810_GPIOA);
+ return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN));
+}
+
+static int bit_i810ddc_getsda(void *data)
+{
+ writel(SDA_DIR_MASK, ioaddr + I810_GPIOA);
+ writel(0, ioaddr + I810_GPIOA);
+ return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN));
+}
+
+static int config_i810(struct pci_dev *dev)
+{
+ unsigned long cadr;
+
+ /* map I810 memory */
+ cadr = dev->resource[1].start;
+ cadr += I810_IOCONTROL_OFFSET;
+ cadr &= PCI_BASE_ADDRESS_MEM_MASK;
+ ioaddr = ioremap_nocache(cadr, 0x1000);
+ if (ioaddr) {
+ bit_i810i2c_setscl(NULL, 1);
+ bit_i810i2c_setsda(NULL, 1);
+ bit_i810ddc_setscl(NULL, 1);
+ bit_i810ddc_setsda(NULL, 1);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static struct i2c_algo_bit_data i810_i2c_bit_data = {
+ .setsda = bit_i810i2c_setsda,
+ .setscl = bit_i810i2c_setscl,
+ .getsda = bit_i810i2c_getsda,
+ .getscl = bit_i810i2c_getscl,
+ .udelay = CYCLE_DELAY,
+ .mdelay = CYCLE_DELAY,
+ .timeout = TIMEOUT,
+};
+
+static struct i2c_adapter i810_i2c_adapter = {
+ .owner = THIS_MODULE,
+ .name = "I810/I815 I2C Adapter",
+ .algo_data = &i810_i2c_bit_data,
+};
+
+static struct i2c_algo_bit_data i810_ddc_bit_data = {
+ .setsda = bit_i810ddc_setsda,
+ .setscl = bit_i810ddc_setscl,
+ .getsda = bit_i810ddc_getsda,
+ .getscl = bit_i810ddc_getscl,
+ .udelay = CYCLE_DELAY,
+ .mdelay = CYCLE_DELAY,
+ .timeout = TIMEOUT,
+};
+
+static struct i2c_adapter i810_ddc_adapter = {
+ .owner = THIS_MODULE,
+ .name = "I810/I815 DDC Adapter",
+ .algo_data = &i810_ddc_bit_data,
+};
+
+static struct pci_device_id i810_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE (pci, i810_ids);
+
+static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int retval;
+
+ retval = config_i810(dev);
+ if (retval)
+ return retval;
+ dev_info(&dev->dev, "i810/i815 i2c device found.\n");
+
+ /* set up the sysfs linkage to our parent device */
+ i810_i2c_adapter.dev.parent = &dev->dev;
+ i810_ddc_adapter.dev.parent = &dev->dev;
+
+ retval = i2c_bit_add_bus(&i810_i2c_adapter);
+ if (retval)
+ return retval;
+ retval = i2c_bit_add_bus(&i810_ddc_adapter);
+ if (retval)
+ i2c_bit_del_bus(&i810_i2c_adapter);
+ return retval;
+}
+
+static void __devexit i810_remove(struct pci_dev *dev)
+{
+ i2c_bit_del_bus(&i810_ddc_adapter);
+ i2c_bit_del_bus(&i810_i2c_adapter);
+ iounmap(ioaddr);
+}
+
+static struct pci_driver i810_driver = {
+ .name = "i810_smbus",
+ .id_table = i810_ids,
+ .probe = i810_probe,
+ .remove = __devexit_p(i810_remove),
+};
+
+static int __init i2c_i810_init(void)
+{
+ return pci_register_driver(&i810_driver);
+}
+
+static void __exit i2c_i810_exit(void)
+{
+ pci_unregister_driver(&i810_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "Ralph Metzler <rjkm@thp.uni-koeln.de>, "
+ "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i810_init);
+module_exit(i2c_i810_exit);
OpenPOWER on IntegriCloud