summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
-rw-r--r--drivers/i2c/busses/Kconfig499
1 files changed, 499 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
new file mode 100644
index 0000000..edf8051
--- /dev/null
+++ b/drivers/i2c/busses/Kconfig
@@ -0,0 +1,499 @@
+#
+# Sensor device configuration
+#
+
+menu "I2C Hardware Bus support"
+ depends on I2C
+
+config I2C_ALI1535
+ tristate "ALI 1535"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the SMB
+ Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
+ controller is part of the 7101 device, which is an ACPI-compliant
+ Power Management Unit (PMU).
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ali1535.
+
+config I2C_ALI1563
+ tristate "ALI 1563"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the SMB
+ Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
+ controller is part of the 7101 device, which is an ACPI-compliant
+ Power Management Unit (PMU).
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ali1563.
+
+config I2C_ALI15X3
+ tristate "ALI 15x3"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ali15x3.
+
+config I2C_AMD756
+ tristate "AMD 756/766/768/8111 and nVidia nForce"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the AMD
+ 756/766/768 mainboard I2C interfaces. The driver also includes
+ support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
+ the nVidia nForce I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-amd756.
+
+config I2C_AMD756_S4882
+ tristate "SMBus multiplexing on the Tyan S4882"
+ depends on I2C_AMD756 && EXPERIMENTAL
+ help
+ Enabling this option will add specific SMBus support for the Tyan
+ S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
+ over 8 different channels, where the various memory module EEPROMs
+ and temperature sensors live. Saying yes here will give you access
+ to these in addition to the trunk.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-amd756-s4882.
+
+config I2C_AMD8111
+ tristate "AMD 8111"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ second (SMBus 2.0) AMD 8111 mainboard I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-amd8111.
+
+config I2C_AU1550
+ tristate "Au1550 SMBus interface"
+ depends on I2C && SOC_AU1550
+ help
+ If you say yes to this option, support will be included for the
+ Au1550 SMBus interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-au1550.
+
+config I2C_ELEKTOR
+ tristate "Elektor ISA card"
+ depends on I2C && ISA && BROKEN_ON_SMP
+ select I2C_ALGOPCF
+ help
+ This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
+ such an adapter.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-elektor.
+
+config I2C_HYDRA
+ tristate "CHRP Apple Hydra Mac I/O I2C interface"
+ depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ This supports the use of the I2C interface in the Apple Hydra Mac
+ I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
+ have such a machine.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-hydra.
+
+config I2C_I801
+ tristate "Intel 82801 (ICH)"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the Intel
+ 801 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset are supported:
+ 82801AA
+ 82801AB
+ 82801BA
+ 82801CA/CAM
+ 82801DB
+ 82801EB/ER (ICH5/ICH5R)
+ 6300ESB
+ ICH6
+ ICH7
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-i801.
+
+config I2C_I810
+ tristate "Intel 810/815"
+ depends on I2C && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the Intel
+ 810/815 family of mainboard I2C interfaces. Specifically, the
+ following versions of the chipset is supported:
+ i810AA
+ i810AB
+ i810E
+ i815
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-i810.
+
+config I2C_PIIX4
+ tristate "Intel PIIX4"
+ depends on I2C && PCI
+ help
+ If you say yes to this option, support will be included for the Intel
+ PIIX4 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset are supported:
+ Intel PIIX4
+ Intel 440MX
+ Serverworks OSB4
+ Serverworks CSB5
+ Serverworks CSB6
+ SMSC Victory66
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-piix4.
+
+config I2C_IBM_IIC
+ tristate "IBM PPC 4xx on-chip I2C interface"
+ depends on IBM_OCP && I2C
+ help
+ Say Y here if you want to use IIC peripheral found on
+ embedded IBM PPC 4xx based systems.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ibm_iic.
+
+config I2C_IOP3XX
+ tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
+ depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+ help
+ Say Y here if you want to use the IIC bus controller on
+ the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-iop3xx.
+
+config I2C_ISA
+ tristate "ISA Bus support"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for i2c
+ interfaces that are on the ISA bus.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-isa.
+
+config I2C_ITE
+ tristate "ITE I2C Adapter"
+ depends on I2C && MIPS_ITE8172
+ select I2C_ALGOITE
+ help
+ This supports the ITE8172 I2C peripheral found on some MIPS
+ systems. Say Y if you have one of these. You should also say Y for
+ the ITE I2C driver algorithm support above.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-ite.
+
+config I2C_IXP4XX
+ tristate "IXP4xx GPIO-Based I2C Interface"
+ depends on I2C && ARCH_IXP4XX
+ select I2C_ALGOBIT
+ help
+ Say Y here if you have an Intel IXP4xx(420,421,422,425) based
+ system and are using GPIO lines for an I2C bus.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-ixp4xx.
+
+config I2C_IXP2000
+ tristate "IXP2000 GPIO-Based I2C Interface"
+ depends on I2C && ARCH_IXP2000
+ select I2C_ALGOBIT
+ help
+ Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
+ system and are using GPIO lines for an I2C bus.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-ixp2000.
+
+config I2C_KEYWEST
+ tristate "Powermac Keywest I2C interface"
+ depends on I2C && PPC_PMAC
+ help
+ This supports the use of the I2C interface in the combo-I/O
+ chip on recent Apple machines. Say Y if you have such a machine.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-keywest.
+
+config I2C_MPC
+ tristate "MPC107/824x/85xx/52xx"
+ depends on I2C && PPC
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
+ MPC85xx family processors. The driver may also work on 52xx
+ family processors, though interrupts are known not to work.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mpc.
+
+config I2C_NFORCE2
+ tristate "Nvidia Nforce2"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the Nvidia
+ Nforce2 family of mainboard I2C interfaces.
+ This driver also supports the nForce3 Pro 150 MCP.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-nforce2.
+
+config I2C_PARPORT
+ tristate "Parallel port adapter"
+ depends on I2C && PARPORT
+ select I2C_ALGOBIT
+ help
+ This supports parallel port I2C adapters such as the ones made by
+ Philips or Velleman, Analog Devices evaluation boards, and more.
+ Basically any adapter using the parallel port as an I2C bus with
+ no extra chipset is supported by this driver, or could be.
+
+ This driver is a replacement for (and was inspired by) an older
+ driver named i2c-philips-par. The new driver supports more devices,
+ and makes it easier to add support for new devices.
+
+ Another driver exists, named i2c-parport-light, which doesn't depend
+ on the parport driver. This is meant for embedded systems. Don't say
+ Y here if you intend to say Y or M there.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-parport.
+
+config I2C_PARPORT_LIGHT
+ tristate "Parallel port adapter (light)"
+ depends on I2C
+ select I2C_ALGOBIT
+ help
+ This supports parallel port I2C adapters such as the ones made by
+ Philips or Velleman, Analog Devices evaluation boards, and more.
+ Basically any adapter using the parallel port as an I2C bus with
+ no extra chipset is supported by this driver, or could be.
+
+ This driver is a light version of i2c-parport. It doesn't depend
+ on the parport driver, and uses direct I/O access instead. This
+ might be prefered on embedded systems where wasting memory for
+ the clean but heavy parport handling is not an option. The
+ drawback is a reduced portability and the impossibility to
+ dasiy-chain other parallel port devices.
+
+ Don't say Y here if you said Y or M to i2c-parport. Saying M to
+ both is possible but both modules should not be loaded at the same
+ time.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-parport-light.
+
+config I2C_PROSAVAGE
+ tristate "S3/VIA (Pro)Savage"
+ depends on I2C && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the
+ I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8
+ graphics processors.
+ chipsets supported:
+ S3/VIA KM266/VT8375 aka ProSavage8
+ S3/VIA KM133/VT8365 aka Savage4
+
+ This support is also available as a module. If so, the module
+ will be called i2c-prosavage.
+
+config I2C_RPXLITE
+ tristate "Embedded Planet RPX Lite/Classic support"
+ depends on (RPXLITE || RPXCLASSIC) && I2C
+ select I2C_ALGO8XX
+
+config I2C_S3C2410
+ tristate "S3C2410 I2C Driver"
+ depends on I2C && ARCH_S3C2410
+ help
+ Say Y here to include support for I2C controller in the
+ Samsung S3C2410 based System-on-Chip devices.
+
+config I2C_SAVAGE4
+ tristate "S3 Savage 4"
+ depends on I2C && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the
+ S3 Savage 4 I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-savage4.
+
+config I2C_SIBYTE
+ tristate "SiByte SMBus interface"
+ depends on SIBYTE_SB1xxx_SOC && I2C
+ help
+ Supports the SiByte SOC on-chip I2C interfaces (2 channels).
+
+config SCx200_I2C
+ tristate "NatSemi SCx200 I2C using GPIO pins"
+ depends on SCx200_GPIO && I2C
+ select I2C_ALGOBIT
+ help
+ Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
+
+ If you don't know what to do here, say N.
+
+ This support is also available as a module. If so, the module
+ will be called scx200_i2c.
+
+config SCx200_I2C_SCL
+ int "GPIO pin used for SCL"
+ depends on SCx200_I2C
+ default "12"
+ help
+ Enter the GPIO pin number used for the SCL signal. This value can
+ also be specified with a module parameter.
+
+config SCx200_I2C_SDA
+ int "GPIO pin used for SDA"
+ depends on SCx200_I2C
+ default "13"
+ help
+ Enter the GPIO pin number used for the SSA signal. This value can
+ also be specified with a module parameter.
+
+config SCx200_ACB
+ tristate "NatSemi SCx200 ACCESS.bus"
+ depends on I2C && PCI
+ help
+ Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+
+ If you don't know what to do here, say N.
+
+ This support is also available as a module. If so, the module
+ will be called scx200_acb.
+
+config I2C_SIS5595
+ tristate "SiS 5595"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ SiS5595 SMBus (a subset of I2C) interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis5595.
+
+config I2C_SIS630
+ tristate "SiS 630/730"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ SiS630 and SiS730 SMBus (a subset of I2C) interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis630.
+
+config I2C_SIS96X
+ tristate "SiS 96x"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the SiS
+ 96x SMBus (a subset of I2C) interfaces. Specifically, the following
+ chipsets are supported:
+ 645/961
+ 645DX/961
+ 645DX/962
+ 648/961
+ 650/961
+ 735
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sis96x.
+
+config I2C_STUB
+ tristate "I2C/SMBus Test Stub"
+ depends on I2C && EXPERIMENTAL && 'm'
+ default 'n'
+ help
+ This module may be useful to developers of SMBus client drivers,
+ especially for certain kinds of sensor chips.
+
+ If you do build this module, be sure to read the notes and warnings
+ in <file:Documentation/i2c/i2c-stub>.
+
+ If you don't know what to do here, definitely say N.
+
+config I2C_VIA
+ tristate "VIA 82C586B"
+ depends on I2C && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the VIA
+ 82C586B I2C interface
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-via.
+
+config I2C_VIAPRO
+ tristate "VIA 82C596/82C686/823x"
+ depends on I2C && PCI && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the VIA
+ 82C596/82C686/823x I2C interfaces. Specifically, the following
+ chipsets are supported:
+ 82C596A/B
+ 82C686A/B
+ 8231
+ 8233
+ 8233A
+ 8235
+ 8237
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-viapro.
+
+config I2C_VOODOO3
+ tristate "Voodoo 3"
+ depends on I2C && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT
+ help
+ If you say yes to this option, support will be included for the
+ Voodoo 3 I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-voodoo3.
+
+config I2C_PCA_ISA
+ tristate "PCA9564 on an ISA bus"
+ depends on I2C
+ select I2C_ALGOPCA
+ help
+ This driver supports ISA boards using the Philips PCA 9564
+ Parallel bus to I2C bus controller
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pca-isa.
+
+config I2C_MV64XXX
+ tristate "Marvell mv64xxx I2C Controller"
+ depends on I2C && MV64X60 && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Marvell 64xxx line of host bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mv64xxx.
+
+endmenu
OpenPOWER on IntegriCloud