diff options
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 715 |
1 files changed, 355 insertions, 360 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 48438cc..6ee997b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -4,6 +4,9 @@ menu "I2C Hardware Bus support" +comment "PC SMBus host controller drivers" + depends on PCI + config I2C_ALI1535 tristate "ALI 1535" depends on PCI @@ -73,6 +76,186 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. +config I2C_I801 + tristate "Intel 82801 (ICH)" + depends on PCI + help + If you say yes to this option, support will be included for the Intel + 801 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + 82801AA + 82801AB + 82801BA + 82801CA/CAM + 82801DB + 82801EB/ER (ICH5/ICH5R) + 6300ESB + ICH6 + ICH7 + ESB2 + ICH8 + ICH9 + Tolapai + ICH10 + + This driver can also be built as a module. If so, the module + will be called i2c-i801. + +config I2C_ISCH + tristate "Intel SCH SMBus 1.0" + depends on PCI + help + Say Y here if you want to use SMBus controller on the Intel SCH + based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-isch. + +config I2C_PIIX4 + tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" + depends on PCI + help + If you say yes to this option, support will be included for the Intel + PIIX4 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported (note that Serverworks is part + of Broadcom): + Intel PIIX4 + Intel 440MX + ATI IXP200 + ATI IXP300 + ATI IXP400 + ATI SB600 + ATI SB700 + ATI SB800 + Serverworks OSB4 + Serverworks CSB5 + Serverworks CSB6 + Serverworks HT-1000 + SMSC Victory66 + + This driver can also be built as a module. If so, the module + will be called i2c-piix4. + +config I2C_NFORCE2 + tristate "Nvidia nForce2, nForce3 and nForce4" + depends on PCI + help + If you say yes to this option, support will be included for the Nvidia + nForce2, nForce3 and nForce4 families of mainboard I2C interfaces. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2. + +config I2C_NFORCE2_S4985 + tristate "SMBus multiplexing on the Tyan S4985" + depends on I2C_NFORCE2 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 4 different channels, where the various memory module EEPROMs + live. Saying yes here will give you access to these in addition + to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2-s4985. + +config I2C_SIS5595 + tristate "SiS 5595" + depends on PCI + help + If you say yes to this option, support will be included for the + SiS5595 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis5595. + +config I2C_SIS630 + tristate "SiS 630/730" + depends on PCI + help + If you say yes to this option, support will be included for the + SiS630 and SiS730 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis630. + +config I2C_SIS96X + tristate "SiS 96x" + depends on PCI + help + If you say yes to this option, support will be included for the SiS + 96x SMBus (a subset of I2C) interfaces. Specifically, the following + chipsets are supported: + 645/961 + 645DX/961 + 645DX/962 + 648/961 + 650/961 + 735 + 745 + + This driver can also be built as a module. If so, the module + will be called i2c-sis96x. + +config I2C_VIA + tristate "VIA VT82C586B" + depends on PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the VIA + 82C586B I2C interface + + This driver can also be built as a module. If so, the module + will be called i2c-via. + +config I2C_VIAPRO + tristate "VIA VT82C596/82C686/82xx and CX700" + depends on PCI + help + If you say yes to this option, support will be included for the VIA + VT82C596 and later SMBus interface. Specifically, the following + chipsets are supported: + VT82C596A/B + VT82C686A/B + VT8231 + VT8233/A + VT8235 + VT8237R/A/S + VT8251 + CX700 + + This driver can also be built as a module. If so, the module + will be called i2c-viapro. + +comment "Mac SMBus host controller drivers" + depends on PPC_CHRP || PPC_PMAC + +config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on PCI && PPC_CHRP && EXPERIMENTAL + select I2C_ALGOBIT + help + This supports the use of the I2C interface in the Apple Hydra Mac + I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you + have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-hydra. + +config I2C_POWERMAC + tristate "Powermac I2C interface" + depends on PPC_PMAC + default y + help + This exposes the various PowerMac i2c interfaces to the linux i2c + layer and to userland. It is used by various drivers on the PowerMac + platform, and should generally be enabled. + + This support is also available as a module. If so, the module + will be called i2c-powermac. + +comment "I2C system bus drivers (mostly embedded / system-on-chip)" + config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" depends on ARCH_AT91 && EXPERIMENTAL && BROKEN @@ -101,10 +284,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 help - This is the TWI I2C device driver for Blackfin BF522, BF525, - BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, - please don't use this driver. + This is the I2C bus driver for Blackfin on-chip TWI interface. This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. @@ -117,6 +299,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ help The unit of the TWI clock is kHz. +config I2C_CPM + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" + depends on (CPM1 || CPM2) && OF_I2C + help + This supports the use of the I2C interface on Freescale + processors with CPM1 or CPM2. + + This driver can also be built as a module. If so, the module + will be called i2c-cpm. + config I2C_DAVINCI tristate "DaVinci I2C driver" depends on ARCH_DAVINCI @@ -130,17 +322,6 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci -config I2C_ELEKTOR - tristate "Elektor ISA card" - depends on ISA && BROKEN_ON_SMP - select I2C_ALGOPCF - help - This supports the PCF8584 ISA bus I2C adapter. Say Y if you own - such an adapter. - - This support is also available as a module. If so, the module - will be called i2c-elektor. - config I2C_GPIO tristate "GPIO-based bitbanging I2C" depends on GENERIC_GPIO @@ -149,104 +330,6 @@ config I2C_GPIO This is a very simple bitbanging I2C driver utilizing the arch-neutral GPIO API to control the SCL and SDA lines. -config I2C_HYDRA - tristate "CHRP Apple Hydra Mac I/O I2C interface" - depends on PCI && PPC_CHRP && EXPERIMENTAL - select I2C_ALGOBIT - help - This supports the use of the I2C interface in the Apple Hydra Mac - I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you - have such a machine. - - This support is also available as a module. If so, the module - will be called i2c-hydra. - -config I2C_I801 - tristate "Intel 82801 (ICH)" - depends on PCI - help - If you say yes to this option, support will be included for the Intel - 801 family of mainboard I2C interfaces. Specifically, the following - versions of the chipset are supported: - 82801AA - 82801AB - 82801BA - 82801CA/CAM - 82801DB - 82801EB/ER (ICH5/ICH5R) - 6300ESB - ICH6 - ICH7 - ESB2 - ICH8 - ICH9 - Tolapai - ICH10 - - This driver can also be built as a module. If so, the module - will be called i2c-i801. - -config I2C_I810 - tristate "Intel 810/815 (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the Intel - 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset are supported: - i810AA - i810AB - i810E - i815 - i845G - - This driver is deprecated in favor of the i810fb and intelfb drivers. - - This driver can also be built as a module. If so, the module - will be called i2c-i810. - -config I2C_PXA - tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" - depends on EXPERIMENTAL && ARCH_PXA - help - If you have devices in the PXA I2C bus, say yes to this option. - This driver can also be built as a module. If so, the module - will be called i2c-pxa. - -config I2C_PXA_SLAVE - bool "Intel PXA2XX I2C Slave comms support" - depends on I2C_PXA - help - Support I2C slave mode communications on the PXA I2C bus. This - is necessary for systems where the PXA may be a target on the - I2C bus. - -config I2C_PIIX4 - tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" - depends on PCI - help - If you say yes to this option, support will be included for the Intel - PIIX4 family of mainboard I2C interfaces. Specifically, the following - versions of the chipset are supported (note that Serverworks is part - of Broadcom): - Intel PIIX4 - Intel 440MX - ATI IXP200 - ATI IXP300 - ATI IXP400 - ATI SB600 - ATI SB700 - ATI SB800 - Serverworks OSB4 - Serverworks CSB5 - Serverworks CSB6 - Serverworks HT-1000 - SMSC Victory66 - - This driver can also be built as a module. If so, the module - will be called i2c-piix4. - config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" depends on 4xx @@ -281,18 +364,6 @@ config I2C_IXP2000 This driver is deprecated and will be dropped soon. Use i2c-gpio instead. -config I2C_POWERMAC - tristate "Powermac I2C interface" - depends on PPC_PMAC - default y - help - This exposes the various PowerMac i2c interfaces to the linux i2c - layer and to userland. It is used by various drivers on the PowerMac - platform, and should generally be enabled. - - This support is also available as a module. If so, the module - will be called i2c-powermac. - config I2C_MPC tristate "MPC107/824x/85xx/52xx/86xx" depends on PPC32 @@ -305,15 +376,15 @@ config I2C_MPC This driver can also be built as a module. If so, the module will be called i2c-mpc. -config I2C_NFORCE2 - tristate "Nvidia nForce2, nForce3 and nForce4" - depends on PCI +config I2C_MV64XXX + tristate "Marvell mv64xxx I2C Controller" + depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL help - If you say yes to this option, support will be included for the Nvidia - nForce2, nForce3 and nForce4 families of mainboard I2C interfaces. + If you say yes to this option, support will be included for the + built-in I2C interface on the Marvell 64xxx line of host bridges. This driver can also be built as a module. If so, the module - will be called i2c-nforce2. + will be called i2c-mv64xxx. config I2C_OCORES tristate "OpenCores I2C Controller" @@ -336,76 +407,37 @@ config I2C_OMAP Like OMAP1510/1610/1710/5912 and OMAP242x. For details see http://www.ti.com/omap. -config I2C_PARPORT - tristate "Parallel port adapter" - depends on PARPORT - select I2C_ALGOBIT - help - This supports parallel port I2C adapters such as the ones made by - Philips or Velleman, Analog Devices evaluation boards, and more. - Basically any adapter using the parallel port as an I2C bus with - no extra chipset is supported by this driver, or could be. - - This driver is a replacement for (and was inspired by) an older - driver named i2c-philips-par. The new driver supports more devices, - and makes it easier to add support for new devices. - - An adapter type parameter is now mandatory. Please read the file - Documentation/i2c/busses/i2c-parport for details. - - Another driver exists, named i2c-parport-light, which doesn't depend - on the parport driver. This is meant for embedded systems. Don't say - Y here if you intend to say Y or M there. - - This support is also available as a module. If so, the module - will be called i2c-parport. - -config I2C_PARPORT_LIGHT - tristate "Parallel port adapter (light)" - select I2C_ALGOBIT - help - This supports parallel port I2C adapters such as the ones made by - Philips or Velleman, Analog Devices evaluation boards, and more. - Basically any adapter using the parallel port as an I2C bus with - no extra chipset is supported by this driver, or could be. - - This driver is a light version of i2c-parport. It doesn't depend - on the parport driver, and uses direct I/O access instead. This - might be preferred on embedded systems where wasting memory for - the clean but heavy parport handling is not an option. The - drawback is a reduced portability and the impossibility to - daisy-chain other parallel port devices. - - Don't say Y here if you said Y or M to i2c-parport. Saying M to - both is possible but both modules should not be loaded at the same - time. - - This support is also available as a module. If so, the module - will be called i2c-parport-light. - config I2C_PASEMI tristate "PA Semi SMBus interface" depends on PPC_PASEMI && PCI help Supports the PA Semi PWRficient on-chip SMBus interfaces. -config I2C_PROSAVAGE - tristate "S3/VIA (Pro)Savage (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT +config I2C_PNX + tristate "I2C bus support for Philips PNX targets" + depends on ARCH_PNX4008 help - If you say yes to this option, support will be included for the - I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 - graphics processors. - chipsets supported: - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 + This driver supports the Philips IP3204 I2C IP block master and/or + slave controller - This driver is deprecated in favor of the savagefb driver. + This driver can also be built as a module. If so, the module + will be called i2c-pnx. - This support is also available as a module. If so, the module - will be called i2c-prosavage. +config I2C_PXA + tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" + depends on EXPERIMENTAL && ARCH_PXA + help + If you have devices in the PXA I2C bus, say yes to this option. + This driver can also be built as a module. If so, the module + will be called i2c-pxa. + +config I2C_PXA_SLAVE + bool "Intel PXA2XX I2C Slave comms support" + depends on I2C_PXA + help + Support I2C slave mode communications on the PXA I2C bus. This + is necessary for systems where the PXA may be a target on the + I2C bus. config I2C_S3C2410 tristate "S3C2410 I2C Driver" @@ -414,25 +446,24 @@ config I2C_S3C2410 Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. -config I2C_SAVAGE4 - tristate "S3 Savage 4 (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT +config I2C_SH7760 + tristate "Renesas SH7760 I2C Controller" + depends on CPU_SUBTYPE_SH7760 help - If you say yes to this option, support will be included for the - S3 Savage 4 I2C interface. - - This driver is deprecated in favor of the savagefb driver. + This driver supports the 2 I2C interfaces on the Renesas SH7760. This driver can also be built as a module. If so, the module - will be called i2c-savage4. + will be called i2c-sh7760. -config I2C_SIBYTE - tristate "SiByte SMBus interface" - depends on SIBYTE_SB1xxx_SOC +config I2C_SH_MOBILE + tristate "SuperH Mobile I2C Controller" + depends on SUPERH help - Supports the SiByte SOC on-chip I2C interfaces (2 channels). + If you say yes to this option, support will be included for the + built-in I2C interface on the Renesas SH-Mobile processor. + + This driver can also be built as a module. If so, the module + will be called i2c-sh_mobile. config I2C_SIMTEC tristate "Simtec Generic I2C interface" @@ -446,86 +477,65 @@ config I2C_SIMTEC This driver can also be built as a module. If so, the module will be called i2c-simtec. -config SCx200_I2C - tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" - depends on SCx200_GPIO +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on ARCH_VERSATILE || ARCH_REALVIEW select I2C_ALGOBIT help - Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. - - If you don't know what to do here, say N. + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. - This support is also available as a module. If so, the module - will be called scx200_i2c. + This driver can also be built as a module. If so, the module + will be called i2c-versatile. - This driver is deprecated and will be dropped soon. Use i2c-gpio - (or scx200_acb) instead. +comment "External I2C/SMBus adapter drivers" -config SCx200_I2C_SCL - int "GPIO pin used for SCL" - depends on SCx200_I2C - default "12" +config I2C_PARPORT + tristate "Parallel port adapter" + depends on PARPORT + select I2C_ALGOBIT help - Enter the GPIO pin number used for the SCL signal. This value can - also be specified with a module parameter. + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. -config SCx200_I2C_SDA - int "GPIO pin used for SDA" - depends on SCx200_I2C - default "13" - help - Enter the GPIO pin number used for the SSA signal. This value can - also be specified with a module parameter. + This driver is a replacement for (and was inspired by) an older + driver named i2c-philips-par. The new driver supports more devices, + and makes it easier to add support for new devices. -config SCx200_ACB - tristate "Geode ACCESS.bus support" - depends on X86_32 && PCI - help - Enable the use of the ACCESS.bus controllers on the Geode SCx200 and - SC1100 processors and the CS5535 and CS5536 Geode companion devices. + An adapter type parameter is now mandatory. Please read the file + Documentation/i2c/busses/i2c-parport for details. - If you don't know what to do here, say N. + Another driver exists, named i2c-parport-light, which doesn't depend + on the parport driver. This is meant for embedded systems. Don't say + Y here if you intend to say Y or M there. This support is also available as a module. If so, the module - will be called scx200_acb. - -config I2C_SIS5595 - tristate "SiS 5595" - depends on PCI - help - If you say yes to this option, support will be included for the - SiS5595 SMBus (a subset of I2C) interface. - - This driver can also be built as a module. If so, the module - will be called i2c-sis5595. + will be called i2c-parport. -config I2C_SIS630 - tristate "SiS 630/730" - depends on PCI +config I2C_PARPORT_LIGHT + tristate "Parallel port adapter (light)" + select I2C_ALGOBIT help - If you say yes to this option, support will be included for the - SiS630 and SiS730 SMBus (a subset of I2C) interface. + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. - This driver can also be built as a module. If so, the module - will be called i2c-sis630. + This driver is a light version of i2c-parport. It doesn't depend + on the parport driver, and uses direct I/O access instead. This + might be preferred on embedded systems where wasting memory for + the clean but heavy parport handling is not an option. The + drawback is a reduced portability and the impossibility to + daisy-chain other parallel port devices. -config I2C_SIS96X - tristate "SiS 96x" - depends on PCI - help - If you say yes to this option, support will be included for the SiS - 96x SMBus (a subset of I2C) interfaces. Specifically, the following - chipsets are supported: - 645/961 - 645DX/961 - 645DX/962 - 648/961 - 650/961 - 735 - 745 + Don't say Y here if you said Y or M to i2c-parport. Saying M to + both is possible but both modules should not be loaded at the same + time. - This driver can also be built as a module. If so, the module - will be called i2c-sis96x. + This support is also available as a module. If so, the module + will be called i2c-parport-light. config I2C_TAOS_EVM tristate "TAOS evaluation module" @@ -543,21 +553,8 @@ config I2C_TAOS_EVM This support is also available as a module. If so, the module will be called i2c-taos-evm. -config I2C_STUB - tristate "I2C/SMBus Test Stub" - depends on EXPERIMENTAL && m - default 'n' - help - This module may be useful to developers of SMBus client drivers, - especially for certain kinds of sensor chips. - - If you do build this module, be sure to read the notes and warnings - in <file:Documentation/i2c/i2c-stub>. - - If you don't know what to do here, definitely say N. - config I2C_TINY_USB - tristate "I2C-Tiny-USB" + tristate "Tiny-USB adapter" depends on USB help If you say yes to this option, support will be included for the @@ -567,16 +564,21 @@ config I2C_TINY_USB This driver can also be built as a module. If so, the module will be called i2c-tiny-usb. -config I2C_VERSATILE - tristate "ARM Versatile/Realview I2C bus support" - depends on ARCH_VERSATILE || ARCH_REALVIEW +comment "Graphics adapter I2C/DDC channel drivers" + depends on PCI + +config I2C_VOODOO3 + tristate "Voodoo 3" + depends on PCI select I2C_ALGOBIT help - Say yes if you want to support the I2C serial bus on ARMs Versatile - range of platforms. + If you say yes to this option, support will be included for the + Voodoo 3 I2C interface. This driver can also be built as a module. If so, the module - will be called i2c-versatile. + will be called i2c-voodoo3. + +comment "Other I2C/SMBus bus drivers" config I2C_ACORN tristate "Acorn IOC/IOMD I2C bus support" @@ -588,46 +590,16 @@ config I2C_ACORN If you don't know, say Y. -config I2C_VIA - tristate "VIA 82C586B" - depends on PCI && EXPERIMENTAL - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the VIA - 82C586B I2C interface - - This driver can also be built as a module. If so, the module - will be called i2c-via. - -config I2C_VIAPRO - tristate "VIA VT82C596/82C686/82xx and CX700" - depends on PCI - help - If you say yes to this option, support will be included for the VIA - VT82C596 and later SMBus interface. Specifically, the following - chipsets are supported: - VT82C596A/B - VT82C686A/B - VT8231 - VT8233/A - VT8235 - VT8237R/A/S - VT8251 - CX700 - - This driver can also be built as a module. If so, the module - will be called i2c-viapro. - -config I2C_VOODOO3 - tristate "Voodoo 3" - depends on PCI - select I2C_ALGOBIT +config I2C_ELEKTOR + tristate "Elektor ISA card" + depends on ISA && BROKEN_ON_SMP + select I2C_ALGOPCF help - If you say yes to this option, support will be included for the - Voodoo 3 I2C interface. + This supports the PCF8584 ISA bus I2C adapter. Say Y if you own + such an adapter. - This driver can also be built as a module. If so, the module - will be called i2c-voodoo3. + This support is also available as a module. If so, the module + will be called i2c-elektor. config I2C_PCA_ISA tristate "PCA9564 on an ISA bus" @@ -657,26 +629,6 @@ config I2C_PCA_PLATFORM This driver can also be built as a module. If so, the module will be called i2c-pca-platform. -config I2C_MV64XXX - tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL - help - If you say yes to this option, support will be included for the - built-in I2C interface on the Marvell 64xxx line of host bridges. - - This driver can also be built as a module. If so, the module - will be called i2c-mv64xxx. - -config I2C_PNX - tristate "I2C bus support for Philips PNX targets" - depends on ARCH_PNX4008 - help - This driver supports the Philips IP3204 I2C IP block master and/or - slave controller - - This driver can also be built as a module. If so, the module - will be called i2c-pnx. - config I2C_PMCMSP tristate "PMC MSP I2C TWI Controller" depends on PMC_MSP @@ -686,23 +638,66 @@ config I2C_PMCMSP This driver can also be built as module. If so, the module will be called i2c-pmcmsp. -config I2C_SH7760 - tristate "Renesas SH7760 I2C Controller" - depends on CPU_SUBTYPE_SH7760 +config I2C_SIBYTE + tristate "SiByte SMBus interface" + depends on SIBYTE_SB1xxx_SOC help - This driver supports the 2 I2C interfaces on the Renesas SH7760. + Supports the SiByte SOC on-chip I2C interfaces (2 channels). - This driver can also be built as a module. If so, the module - will be called i2c-sh7760. +config I2C_STUB + tristate "I2C/SMBus Test Stub" + depends on EXPERIMENTAL && m + default 'n' + help + This module may be useful to developers of SMBus client drivers, + especially for certain kinds of sensor chips. -config I2C_SH_MOBILE - tristate "SuperH Mobile I2C Controller" - depends on SUPERH + If you do build this module, be sure to read the notes and warnings + in <file:Documentation/i2c/i2c-stub>. + + If you don't know what to do here, definitely say N. + +config SCx200_I2C + tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" + depends on SCx200_GPIO + select I2C_ALGOBIT help - If you say yes to this option, support will be included for the - built-in I2C interface on the Renesas SH-Mobile processor. + Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. - This driver can also be built as a module. If so, the module - will be called i2c-sh_mobile. + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_i2c. + + This driver is deprecated and will be dropped soon. Use i2c-gpio + (or scx200_acb) instead. + +config SCx200_I2C_SCL + int "GPIO pin used for SCL" + depends on SCx200_I2C + default "12" + help + Enter the GPIO pin number used for the SCL signal. This value can + also be specified with a module parameter. + +config SCx200_I2C_SDA + int "GPIO pin used for SDA" + depends on SCx200_I2C + default "13" + help + Enter the GPIO pin number used for the SSA signal. This value can + also be specified with a module parameter. + +config SCx200_ACB + tristate "Geode ACCESS.bus support" + depends on X86_32 && PCI + help + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_acb. endmenu |
