summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/algos/i2c-algo-ite.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/algos/i2c-algo-ite.h')
-rw-r--r--drivers/i2c/algos/i2c-algo-ite.h117
1 files changed, 0 insertions, 117 deletions
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
deleted file mode 100644
index a8ca3c9..0000000
--- a/drivers/i2c/algos/i2c-algo-ite.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- --------------------------------------------------------------------
- i2c-ite.h: Global defines for the I2C controller on board the
- ITE MIPS processor.
- --------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
-#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
- the current transaction */
-#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
-#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
-#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
-#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
- the command and send the data programmed in
- all required registers to I2C bus */
-#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
- in the first and last bytes */
-#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
-#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
-#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
-#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
-#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
- next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
-#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
-#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
-#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
-#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define ITE_I2CFDR_MASK 0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK 0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
- and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
-#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
-#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
-#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
-
-#endif /* I2C_ITE_H */
OpenPOWER on IntegriCloud