summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig12
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/adm1021.c6
-rw-r--r--drivers/hwmon/adm1025.c10
-rw-r--r--drivers/hwmon/adm1026.c10
-rw-r--r--drivers/hwmon/adm1031.c6
-rw-r--r--drivers/hwmon/adm9240.c6
-rw-r--r--drivers/hwmon/asb100.c6
-rw-r--r--drivers/hwmon/atxp1.c6
-rw-r--r--drivers/hwmon/ds1621.c6
-rw-r--r--drivers/hwmon/fscher.c6
-rw-r--r--drivers/hwmon/fscpos.c6
-rw-r--r--drivers/hwmon/gl518sm.c6
-rw-r--r--drivers/hwmon/gl520sm.c6
-rw-r--r--drivers/hwmon/hwmon-vid.c69
-rw-r--r--drivers/hwmon/it87.c18
-rw-r--r--drivers/hwmon/lm63.c6
-rw-r--r--drivers/hwmon/lm75.c6
-rw-r--r--drivers/hwmon/lm77.c6
-rw-r--r--drivers/hwmon/lm78.c13
-rw-r--r--drivers/hwmon/lm80.c6
-rw-r--r--drivers/hwmon/lm83.c6
-rw-r--r--drivers/hwmon/lm85.c50
-rw-r--r--drivers/hwmon/lm87.c6
-rw-r--r--drivers/hwmon/lm90.c6
-rw-r--r--drivers/hwmon/lm92.c6
-rw-r--r--drivers/hwmon/max1619.c6
-rw-r--r--drivers/hwmon/pc87360.c7
-rw-r--r--drivers/hwmon/sis5595.c8
-rw-r--r--drivers/hwmon/smsc47b397.c8
-rw-r--r--drivers/hwmon/smsc47m1.c7
-rw-r--r--drivers/hwmon/via686a.c8
-rw-r--r--drivers/hwmon/vt8231.c862
-rw-r--r--drivers/hwmon/w83627ehf.c7
-rw-r--r--drivers/hwmon/w83627hf.c23
-rw-r--r--drivers/hwmon/w83781d.c13
-rw-r--r--drivers/hwmon/w83792d.c83
-rw-r--r--drivers/hwmon/w83l785ts.c6
38 files changed, 1106 insertions, 223 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index db358cf..c582959 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -350,6 +350,18 @@ config SENSORS_VIA686A
This driver can also be built as a module. If so, the module
will be called via686a.
+config SENSORS_VT8231
+ tristate "VT8231"
+ depends on HWMON && I2C && PCI && EXPERIMENTAL
+ select HWMON_VID
+ select I2C_ISA
+ help
+ If you say yes here then you get support for the integrated sensors
+ in the VIA VT8231 device.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt8231.
+
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
depends on HWMON && I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index f7d6a2f..06d4a1d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 8102876..6656127 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -126,10 +126,10 @@ static int read_only;
/* This is the driver that will be inserted */
static struct i2c_driver adm1021_driver = {
- .owner = THIS_MODULE,
- .name = "adm1021",
+ .driver = {
+ .name = "adm1021",
+ },
.id = I2C_DRIVERID_ADM1021,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm1021_attach_adapter,
.detach_client = adm1021_detach_client,
};
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 3ec1242..9331c56 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -118,10 +118,10 @@ static struct adm1025_data *adm1025_update_device(struct device *dev);
*/
static struct i2c_driver adm1025_driver = {
- .owner = THIS_MODULE,
- .name = "adm1025",
+ .driver = {
+ .name = "adm1025",
+ },
.id = I2C_DRIVERID_ADM1025,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm1025_attach_adapter,
.detach_client = adm1025_detach_client,
};
@@ -287,8 +287,6 @@ static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char
struct adm1025_data *data = adm1025_update_device(dev);
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
}
-/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */
-static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
@@ -444,8 +442,6 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_alarms);
- /* in1_ref is deprecated, remove after 2005-11-11 */
- device_create_file(&new_client->dev, &dev_attr_in1_ref);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index e0f5654..fefe6e7 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -308,9 +308,9 @@ static void adm1026_init_client(struct i2c_client *client);
static struct i2c_driver adm1026_driver = {
- .owner = THIS_MODULE,
- .name = "adm1026",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "adm1026",
+ },
.attach_adapter = adm1026_attach_adapter,
.detach_client = adm1026_detach_client,
};
@@ -1227,8 +1227,6 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c
struct adm1026_data *data = adm1026_update_device(dev);
return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
}
-/* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
-static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL);
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1673,8 +1671,6 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable);
- /* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
- device_create_file(&new_client->dev, &dev_attr_vid);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_alarms);
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 7c545d5..d063979 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -105,9 +105,9 @@ static struct adm1031_data *adm1031_update_device(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver adm1031_driver = {
- .owner = THIS_MODULE,
- .name = "adm1031",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "adm1031",
+ },
.attach_adapter = adm1031_attach_adapter,
.detach_client = adm1031_detach_client,
};
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 11dc95f..5ddc22f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -137,10 +137,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev);
/* driver data */
static struct i2c_driver adm9240_driver = {
- .owner = THIS_MODULE,
- .name = "adm9240",
+ .driver = {
+ .name = "adm9240",
+ },
.id = I2C_DRIVERID_ADM9240,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm9240_attach_adapter,
.detach_client = adm9240_detach_client,
};
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 52c4697..ae9de63 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -217,10 +217,10 @@ static struct asb100_data *asb100_update_device(struct device *dev);
static void asb100_init_client(struct i2c_client *client);
static struct i2c_driver asb100_driver = {
- .owner = THIS_MODULE,
- .name = "asb100",
+ .driver = {
+ .name = "asb100",
+ },
.id = I2C_DRIVERID_ASB100,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = asb100_attach_adapter,
.detach_client = asb100_detach_client,
};
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 53324f5..b0c4900 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -50,9 +50,9 @@ static struct atxp1_data * atxp1_update_device(struct device *dev);
static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind);
static struct i2c_driver atxp1_driver = {
- .owner = THIS_MODULE,
- .name = "atxp1",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "atxp1",
+ },
.attach_adapter = atxp1_attach_adapter,
.detach_client = atxp1_detach_client,
};
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 34f71b7..203f9c7 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -89,10 +89,10 @@ static struct ds1621_data *ds1621_update_client(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver ds1621_driver = {
- .owner = THIS_MODULE,
- .name = "ds1621",
+ .driver = {
+ .name = "ds1621",
+ },
.id = I2C_DRIVERID_DS1621,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ds1621_attach_adapter,
.detach_client = ds1621_detach_client,
};
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index a02e1c3..2540918 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -118,10 +118,10 @@ static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
*/
static struct i2c_driver fscher_driver = {
- .owner = THIS_MODULE,
- .name = "fscher",
+ .driver = {
+ .name = "fscher",
+ },
.id = I2C_DRIVERID_FSCHER,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = fscher_attach_adapter,
.detach_client = fscher_detach_client,
};
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 64e4edc..6d0146b 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -100,10 +100,10 @@ static void reset_fan_alarm(struct i2c_client *client, int nr);
* Driver data (common to all clients)
*/
static struct i2c_driver fscpos_driver = {
- .owner = THIS_MODULE,
- .name = "fscpos",
+ .driver = {
+ .name = "fscpos",
+ },
.id = I2C_DRIVERID_FSCPOS,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = fscpos_attach_adapter,
.detach_client = fscpos_detach_client,
};
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 2f178db..9e685e3 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -151,10 +151,10 @@ static struct gl518_data *gl518_update_device(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
- .owner = THIS_MODULE,
- .name = "gl518sm",
+ .driver = {
+ .name = "gl518sm",
+ },
.id = I2C_DRIVERID_GL518,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = gl518_attach_adapter,
.detach_client = gl518_detach_client,
};
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index c39ba12..baee60e 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -109,10 +109,10 @@ static struct gl520_data *gl520_update_device(struct device *dev);
/* Driver data */
static struct i2c_driver gl520_driver = {
- .owner = THIS_MODULE,
- .name = "gl520sm",
+ .driver = {
+ .name = "gl520sm",
+ },
.id = I2C_DRIVERID_GL520,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = gl520_attach_adapter,
.detach_client = gl520_detach_client,
};
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 312769a..e497274 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -49,20 +49,22 @@
. . . .
11110 = 0.800 V
11111 = 0.000 V (off)
+
+ The 17 specification is in fact Intel Mobile Voltage Positioning -
+ (IMVP-II). You can find more information in the datasheet of Max1718
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+
*/
/* vrm is the VRM/VRD document version multiplied by 10.
val is the 4-, 5- or 6-bit VID code.
Returned value is in mV to avoid floating point in the kernel. */
-int vid_from_reg(int val, int vrm)
+int vid_from_reg(int val, u8 vrm)
{
int vid;
switch(vrm) {
- case 0:
- return 0;
-
case 100: /* VRD 10.0 */
if((val & 0x1f) == 0x1f)
return 0;
@@ -91,10 +93,16 @@ int vid_from_reg(int val, int vrm)
case 84: /* VRM 8.4 */
val &= 0x0f;
/* fall through */
- default: /* VRM 8.2 */
+ case 82: /* VRM 8.2 */
return(val == 0x1f ? 0 :
val & 0x10 ? 5100 - (val) * 100 :
2050 - (val) * 50);
+ case 17: /* Intel IMVP-II */
+ return(val & 0x10 ? 975 - (val & 0xF) * 25 :
+ 1750 - val * 50);
+ default: /* report 0 for unknown */
+ printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n");
+ return 0;
}
}
@@ -108,30 +116,36 @@ struct vrm_model {
u8 vendor;
u8 eff_family;
u8 eff_model;
- int vrm_type;
+ u8 eff_stepping;
+ u8 vrm_type;
};
#define ANY 0xFF
#ifdef CONFIG_X86
+/* the stepping parameter is highest acceptable stepping for current line */
+
static struct vrm_model vrm_models[] = {
- {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */
- {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */
- {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* Tualatin */
- {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */
- {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */
- {X86_VENDOR_INTEL, 0xF, 0x0, 90}, /* P4 */
- {X86_VENDOR_INTEL, 0xF, 0x1, 90}, /* P4 Willamette */
- {X86_VENDOR_INTEL, 0xF, 0x2, 90}, /* P4 Northwood */
- {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0xF, 0x4, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */
- {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */
+ {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 85}, /* 0.13um too */
+ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
+ {X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */
+ {X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */
+ {X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */
+ {X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */
+ {X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */
+ {X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */
+ {X86_VENDOR_INTEL, 0x10, ANY, ANY, 0}, /* Itanium 2 */
+ {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */
+ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M */
+ {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */
};
-static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
{
int i = 0;
@@ -139,7 +153,8 @@ static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
- (vrm_models[i].eff_model==ANY)))
+ (vrm_models[i].eff_model==ANY)) &&
+ (eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
i++;
}
@@ -147,12 +162,11 @@ static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
return 0;
}
-int vid_which_vrm(void)
+u8 vid_which_vrm(void)
{
struct cpuinfo_x86 *c = cpu_data;
u32 eax;
- u8 eff_family, eff_model;
- int vrm_ret;
+ u8 eff_family, eff_model, eff_stepping, vrm_ret;
if (c->x86 < 6) /* Any CPU with family lower than 6 */
return 0; /* doesn't have VID and/or CPUID */
@@ -160,20 +174,21 @@ int vid_which_vrm(void)
eax = cpuid_eax(1);
eff_family = ((eax & 0x00000F00)>>8);
eff_model = ((eax & 0x000000F0)>>4);
+ eff_stepping = eax & 0xF;
if (eff_family == 0xF) { /* use extended model & family */
eff_family += ((eax & 0x00F00000)>>20);
eff_model += ((eax & 0x000F0000)>>16)<<4;
}
- vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+ vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
if (vrm_ret == 0)
printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
"x86 CPU\n");
return vrm_ret;
}
-/* and now something completely different for the non-x86 world */
+/* and now for something completely different for the non-x86 world */
#else
-int vid_which_vrm(void)
+u8 vid_which_vrm(void)
{
printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
return 0;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a61f5d0..0da7c9c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -213,7 +213,7 @@ struct it87_data {
u8 sensor; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
- int vrm;
+ u8 vrm;
u32 alarms; /* Register encoding, combined */
u8 fan_main_ctrl; /* Register value */
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
@@ -234,17 +234,18 @@ static void it87_init_client(struct i2c_client *client, struct it87_data *data);
static struct i2c_driver it87_driver = {
- .owner = THIS_MODULE,
- .name = "it87",
+ .driver = {
+ .name = "it87",
+ },
.id = I2C_DRIVERID_IT87,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = it87_attach_adapter,
.detach_client = it87_detach_client,
};
static struct i2c_driver it87_isa_driver = {
- .owner = THIS_MODULE,
- .name = "it87-isa",
+ .driver = {
+ .name = "it87-isa",
+ },
.attach_adapter = it87_isa_attach_adapter,
.detach_client = it87_detach_client,
};
@@ -668,7 +669,7 @@ static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->vrm);
+ return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
@@ -761,7 +762,8 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
/* Reserve the ISA region */
if (is_isa)
- if (!request_region(address, IT87_EXTENT, it87_isa_driver.name))
+ if (!request_region(address, IT87_EXTENT,
+ it87_isa_driver.driver.name))
goto ERROR0;
/* For now, we presume we have a valid client. We create the
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 954ec24..6b1aa7e 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -139,9 +139,9 @@ static void lm63_init_client(struct i2c_client *client);
*/
static struct i2c_driver lm63_driver = {
- .owner = THIS_MODULE,
- .name = "lm63",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "lm63",
+ },
.attach_adapter = lm63_attach_adapter,
.detach_client = lm63_detach_client,
};
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index d70f4c8..74ca2c8 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -66,10 +66,10 @@ static struct lm75_data *lm75_update_device(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver lm75_driver = {
- .owner = THIS_MODULE,
- .name = "lm75",
+ .driver = {
+ .name = "lm75",
+ },
.id = I2C_DRIVERID_LM75,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm75_attach_adapter,
.detach_client = lm75_detach_client,
};
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 9380fda..a2f420d 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -74,9 +74,9 @@ static struct lm77_data *lm77_update_device(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver lm77_driver = {
- .owner = THIS_MODULE,
- .name = "lm77",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "lm77",
+ },
.attach_adapter = lm77_attach_adapter,
.detach_client = lm77_detach_client,
};
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 78cdd50..e404001 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -164,17 +164,18 @@ static void lm78_init_client(struct i2c_client *client);
static struct i2c_driver lm78_driver = {
- .owner = THIS_MODULE,
- .name = "lm78",
+ .driver = {
+ .name = "lm78",
+ },
.id = I2C_DRIVERID_LM78,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm78_attach_adapter,
.detach_client = lm78_detach_client,
};
static struct i2c_driver lm78_isa_driver = {
- .owner = THIS_MODULE,
- .name = "lm78-isa",
+ .driver = {
+ .name = "lm78-isa",
+ },
.attach_adapter = lm78_isa_attach_adapter,
.detach_client = lm78_detach_client,
};
@@ -497,7 +498,7 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
/* Reserve the ISA region */
if (is_isa)
if (!request_region(address, LM78_EXTENT,
- lm78_isa_driver.name)) {
+ lm78_isa_driver.driver.name)) {
err = -EBUSY;
goto ERROR0;
}
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index c359fde..c9a7cde 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -143,10 +143,10 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value);
*/
static struct i2c_driver lm80_driver = {
- .owner = THIS_MODULE,
- .name = "lm80",
+ .driver = {
+ .name = "lm80",
+ },
.id = I2C_DRIVERID_LM80,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm80_attach_adapter,
.detach_client = lm80_detach_client,
};
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 9a70611..26dfa9e 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -124,10 +124,10 @@ static struct lm83_data *lm83_update_device(struct device *dev);
*/
static struct i2c_driver lm83_driver = {
- .owner = THIS_MODULE,
- .name = "lm83",
+ .driver = {
+ .name = "lm83",
+ },
.id = I2C_DRIVERID_LM83,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm83_attach_adapter,
.detach_client = lm83_detach_client,
};
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index d1070ed..7389a01 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -380,10 +380,10 @@ static void lm85_init_client(struct i2c_client *client);
static struct i2c_driver lm85_driver = {
- .owner = THIS_MODULE,
- .name = "lm85",
+ .driver = {
+ .name = "lm85",
+ },
.id = I2C_DRIVERID_LM85,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm85_attach_adapter,
.detach_client = lm85_detach_client,
};
@@ -443,7 +443,17 @@ show_fan_offset(4);
static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+ int vid;
+
+ if (data->type == adt7463 && (data->vid & 0x80)) {
+ /* 6-pin VID (VRM 10) */
+ vid = vid_from_reg(data->vid & 0x3f, data->vrm);
+ } else {
+ /* 5-pin VID (VRM 9) */
+ vid = vid_from_reg(data->vid & 0x1f, data->vrm);
+ }
+
+ return sprintf(buf, "%d\n", vid);
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
@@ -1176,17 +1186,14 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp3_input);
@@ -1224,6 +1231,15 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
+ /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
+ as a sixth digital VID input rather than an analog input. */
+ data->vid = lm85_read_value(new_client, LM85_REG_VID);
+ if (!(kind == adt7463 && (data->vid & 0x80))) {
+ device_create_file(&new_client->dev, &dev_attr_in4_input);
+ device_create_file(&new_client->dev, &dev_attr_in4_min);
+ device_create_file(&new_client->dev, &dev_attr_in4_max);
+ }
+
return 0;
/* Error out and cleanup code */
@@ -1382,11 +1398,18 @@ static struct lm85_data *lm85_update_device(struct device *dev)
irrelevant. So it is left in 4*/
data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
- for (i = 0; i <= 4; ++i) {
+ data->vid = lm85_read_value(client, LM85_REG_VID);
+
+ for (i = 0; i <= 3; ++i) {
data->in[i] =
lm85_read_value(client, LM85_REG_IN(i));
}
+ if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ data->in[4] = lm85_read_value(client,
+ LM85_REG_IN(4));
+ }
+
for (i = 0; i <= 3; ++i) {
data->fan[i] =
lm85_read_value(client, LM85_REG_FAN(i));
@@ -1450,13 +1473,20 @@ static struct lm85_data *lm85_update_device(struct device *dev)
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
- for (i = 0; i <= 4; ++i) {
+ for (i = 0; i <= 3; ++i) {
data->in_min[i] =
lm85_read_value(client, LM85_REG_IN_MIN(i));
data->in_max[i] =
lm85_read_value(client, LM85_REG_IN_MAX(i));
}
+ if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ data->in_min[4] = lm85_read_value(client,
+ LM85_REG_IN_MIN(4));
+ data->in_max[4] = lm85_read_value(client,
+ LM85_REG_IN_MAX(4));
+ }
+
if ( data->type == emc6d100 ) {
for (i = 5; i <= 7; ++i) {
data->in_min[i] =
@@ -1478,8 +1508,6 @@ static struct lm85_data *lm85_update_device(struct device *dev)
lm85_read_value(client, LM85_REG_TEMP_MAX(i));
}
- data->vid = lm85_read_value(client, LM85_REG_VID);
-
for (i = 0; i <= 2; ++i) {
int val ;
data->autofan[i].config =
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index eeec1817..6ba34c3 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -161,10 +161,10 @@ static struct lm87_data *lm87_update_device(struct device *dev);
*/
static struct i2c_driver lm87_driver = {
- .owner = THIS_MODULE,
- .name = "lm87",
+ .driver = {
+ .name = "lm87",
+ },
.id = I2C_DRIVERID_LM87,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm87_attach_adapter,
.detach_client = lm87_detach_client,
};
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 83cf2e1..56794644 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -186,10 +186,10 @@ static struct lm90_data *lm90_update_device(struct device *dev);
*/
static struct i2c_driver lm90_driver = {
- .owner = THIS_MODULE,
- .name = "lm90",
+ .driver = {
+ .name = "lm90",
+ },
.id = I2C_DRIVERID_LM90,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm90_attach_adapter,
.detach_client = lm90_detach_client,
};
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 7a4b3701..b0c4cb7 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -410,10 +410,10 @@ static int lm92_detach_client(struct i2c_client *client)
*/
static struct i2c_driver lm92_driver = {
- .owner = THIS_MODULE,
- .name = "lm92",
+ .driver = {
+ .name = "lm92",
+ },
.id = I2C_DRIVERID_LM92,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm92_attach_adapter,
.detach_client = lm92_detach_client,
};
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 69e7e12..3abe330 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -90,9 +90,9 @@ static struct max1619_data *max1619_update_device(struct device *dev);
*/
static struct i2c_driver max1619_driver = {
- .owner = THIS_MODULE,
- .name = "max1619",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "max1619",
+ },
.attach_adapter = max1619_attach_adapter,
.detach_client = max1619_detach_client,
};
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 17f745a..f161e88 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -236,8 +236,9 @@ static struct pc87360_data *pc87360_update_device(struct device *dev);
*/
static struct i2c_driver pc87360_driver = {
- .owner = THIS_MODULE,
- .name = "pc87360",
+ .driver = {
+ .name = "pc87360",
+ },
.attach_adapter = pc87360_detect,
.detach_client = pc87360_detach_client,
};
@@ -798,7 +799,7 @@ static int pc87360_detect(struct i2c_adapter *adapter)
for (i = 0; i < 3; i++) {
if (((data->address[i] = extra_isa[i]))
&& !request_region(extra_isa[i], PC87360_EXTENT,
- pc87360_driver.name)) {
+ pc87360_driver.driver.name)) {
dev_err(&new_client->dev, "Region 0x%x-0x%x already "
"in use!\n", extra_isa[i],
extra_isa[i]+PC87360_EXTENT-1);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 9c6cade..8be5189 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -198,8 +198,9 @@ static struct sis5595_data *sis5595_update_device(struct device *dev);
static void sis5595_init_client(struct i2c_client *client);
static struct i2c_driver sis5595_driver = {
- .owner = THIS_MODULE,
- .name = "sis5595",
+ .driver = {
+ .name = "sis5595",
+ },
.attach_adapter = sis5595_detect,
.detach_client = sis5595_detach_client,
};
@@ -484,7 +485,8 @@ static int sis5595_detect(struct i2c_adapter *adapter)
if (force_addr)
address = force_addr & ~(SIS5595_EXTENT - 1);
/* Reserve the ISA region */
- if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) {
+ if (!request_region(address, SIS5595_EXTENT,
+ sis5595_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 2a3e21b..8663bbb 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -226,8 +226,9 @@ static int smsc47b397_detach_client(struct i2c_client *client)
static int smsc47b397_detect(struct i2c_adapter *adapter);
static struct i2c_driver smsc47b397_driver = {
- .owner = THIS_MODULE,
- .name = "smsc47b397",
+ .driver = {
+ .name = "smsc47b397",
+ },
.attach_adapter = smsc47b397_detect,
.detach_client = smsc47b397_detach_client,
};
@@ -238,7 +239,8 @@ static int smsc47b397_detect(struct i2c_adapter *adapter)
struct smsc47b397_data *data;
int err = 0;
- if (!request_region(address, SMSC_EXTENT, smsc47b397_driver.name)) {
+ if (!request_region(address, SMSC_EXTENT,
+ smsc47b397_driver.driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n",
address);
return -EBUSY;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 5905c1a..d1e3ec0 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -126,8 +126,9 @@ static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
static struct i2c_driver smsc47m1_driver = {
- .owner = THIS_MODULE,
- .name = "smsc47m1",
+ .driver = {
+ .name = "smsc47m1",
+ },
.attach_adapter = smsc47m1_detect,
.detach_client = smsc47m1_detach_client,
};
@@ -394,7 +395,7 @@ static int smsc47m1_detect(struct i2c_adapter *adapter)
int err = 0;
int fan1, fan2, pwm1, pwm2;
- if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
+ if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
return -EBUSY;
}
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 6f696f8..cb01848 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -572,8 +572,9 @@ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver via686a_driver = {
- .owner = THIS_MODULE,
- .name = "via686a",
+ .driver = {
+ .name = "via686a",
+ },
.attach_adapter = via686a_detect,
.detach_client = via686a_detach_client,
};
@@ -615,7 +616,8 @@ static int via686a_detect(struct i2c_adapter *adapter)
}
/* Reserve the ISA region */
- if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) {
+ if (!request_region(address, VIA686A_EXTENT,
+ via686a_driver.driver.name)) {
dev_err(&adapter->dev, "region 0x%x already in use!\n",
address);
return -ENODEV;
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
new file mode 100644
index 0000000..d00a726
--- /dev/null
+++ b/drivers/hwmon/vt8231.c
@@ -0,0 +1,862 @@
+/*
+ vt8231.c - Part of lm_sensors, Linux kernel modules
+ for hardware monitoring
+
+ Copyright (c) 2005 Roger Lucas <roger@planbit.co.uk>
+ Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Aaron M. Marsh <amarsh@sdf.lonestar.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* Supports VIA VT8231 South Bridge embedded sensors
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static int force_addr;
+module_param(force_addr, int, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
+
+/* Device address
+ Note that we can't determine the ISA address until we have initialized
+ our module */
+static unsigned short isa_address;
+
+#define VT8231_EXTENT 0x80
+#define VT8231_BASE_REG 0x70
+#define VT8231_ENABLE_REG 0x74
+
+/* The VT8231 registers
+
+ The reset value for the input channel configuration is used (Reg 0x4A=0x07)
+ which sets the selected inputs marked with '*' below if multiple options are
+ possible:
+
+ Voltage Mode Temperature Mode
+ Sensor Linux Id Linux Id VIA Id
+ -------- -------- -------- ------
+ CPU Diode N/A temp1 0
+ UIC1 in0 temp2 * 1
+ UIC2 in1 * temp3 2
+ UIC3 in2 * temp4 3
+ UIC4 in3 * temp5 4
+ UIC5 in4 * temp6 5
+ 3.3V in5 N/A
+
+ Note that the BIOS may set the configuration register to a different value
+ to match the motherboard configuration.
+*/
+
+/* fans numbered 0-1 */
+#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
+#define VT8231_REG_FAN(nr) (0x29 + (nr))
+
+/* Voltage inputs numbered 0-5 */
+
+static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
+static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
+static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
+
+/* Temperatures are numbered 1-6 according to the Linux kernel specification.
+**
+** In the VIA datasheet, however, the temperatures are numbered from zero.
+** Since it is important that this driver can easily be compared to the VIA
+** datasheet, we will use the VIA numbering within this driver and map the
+** kernel sysfs device name to the VIA number in the sysfs callback.
+*/
+
+#define VT8231_REG_TEMP_LOW01 0x49
+#define VT8231_REG_TEMP_LOW25 0x4d
+
+static const u8 regtemp[] = { 0x1f, 0x21, 0x22, 0x23, 0x24, 0x25 };
+static const u8 regtempmax[] = { 0x39, 0x3d, 0x2b, 0x2d, 0x2f, 0x31 };
+static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
+
+#define TEMP_FROM_REG(reg) (((253 * 4 - (reg)) * 550 + 105) / 210)
+#define TEMP_MAXMIN_FROM_REG(reg) (((253 - (reg)) * 2200 + 105) / 210)
+#define TEMP_MAXMIN_TO_REG(val) (253 - ((val) * 210 + 1100) / 2200)
+
+#define VT8231_REG_CONFIG 0x40
+#define VT8231_REG_ALARM1 0x41
+#define VT8231_REG_ALARM2 0x42
+#define VT8231_REG_FANDIV 0x47
+#define VT8231_REG_UCH_CONFIG 0x4a
+#define VT8231_REG_TEMP1_CONFIG 0x4b
+#define VT8231_REG_TEMP2_CONFIG 0x4c
+
+/* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
+** numbering
+*/
+#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
+ ((ch_config) >> ((i)+1)) & 0x01)
+/* voltages 0-5 */
+#define ISVOLT(i, ch_config) ((i) == 5 ? 1 : \
+ !(((ch_config) >> ((i)+2)) & 0x01))
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* NB The values returned here are NOT temperatures. The calibration curves
+** for the thermistor curves are board-specific and must go in the
+** sensors.conf file. Temperature sensors are actually ten bits, but the
+** VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
+** register. The temperature value returned should have a magnitude of 3,
+** so we use the VIA scaling as the "true" scaling and use the remaining 2
+** LSBs as fractional precision.
+**
+** All the on-chip hardware temperature comparisons for the alarms are only
+** 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
+** in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
+** ignored.
+*/
+
+/******** FAN RPM CONVERSIONS ********
+** This chip saturates back at 0, not at 255 like many the other chips.
+** So, 0 means 0 RPM
+*/
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 0;
+ return SENSORS_LIMIT(1310720 / (rpm * div), 1, 255);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
+
+struct vt8231_data {
+ struct i2c_client client;
+ struct semaphore update_lock;
+ struct class_device *class_dev;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u8 in[6]; /* Register value */
+ u8 in_max[6]; /* Register value */
+ u8 in_min[6]; /* Register value */
+ u16 temp[6]; /* Register value 10 bit, right aligned */
+ u8 temp_max[6]; /* Register value */
+ u8 temp_min[6]; /* Register value */
+ u8 fan[2]; /* Register value */
+ u8 fan_min[2]; /* Register value */
+ u8 fan_div[2]; /* Register encoding, shifted right */
+ u16 alarms; /* Register encoding */
+ u8 uch_config;
+};
+
+static struct pci_dev *s_bridge;
+static int vt8231_detect(struct i2c_adapter *adapter);
+static int vt8231_detach_client(struct i2c_client *client);
+static struct vt8231_data *vt8231_update_device(struct device *dev);
+static void vt8231_init_client(struct i2c_client *client);
+
+static inline int vt8231_read_value(struct i2c_client *client, u8 reg)
+{
+ return inb_p(client->addr + reg);
+}
+
+static inline void vt8231_write_value(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ outb_p(value, client->addr + reg);
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in_min[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", (((data->in_max[nr] - 3) * 10000) / 958));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+/* Special case for input 5 as this has 3.3V scaling built into the chip */
+static ssize_t show_in5(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_min[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_max[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
+ up(&data->update_lock);
+ return count;
+}
+
+#define define_voltage_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset)
+
+define_voltage_sysfs(0);
+define_voltage_sysfs(1);
+define_voltage_sysfs(2);
+define_voltage_sysfs(3);
+define_voltage_sysfs(4);
+
+static DEVICE_ATTR(in5_input, S_IRUGO, show_in5, NULL);
+static DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, show_in5_min, set_in5_min);
+static DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, show_in5_max, set_in5_max);
+
+/* Temperatures */
+static ssize_t show_temp0(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp[0] * 250);
+}
+
+static ssize_t show_temp0_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_max[0] * 1000);
+}
+
+static ssize_t show_temp0_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_min[0] * 1000);
+}
+
+static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_max[nr]));
+}
+
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_min[nr]));
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+/* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
+** temperature sensor numbering (0-5)
+*/
+#define define_temperature_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1)
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp0, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp0_max, set_temp0_max);
+static DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
+
+define_temperature_sysfs(2);
+define_temperature_sysfs(3);
+define_temperature_sysfs(4);
+define_temperature_sysfs(5);
+define_temperature_sysfs(6);
+
+#define CFG_INFO_TEMP(id) { &sensor_dev_attr_temp##id##_input.dev_attr, \
+ &sensor_dev_attr_temp##id##_min.dev_attr, \
+ &sensor_dev_attr_temp##id##_max.dev_attr }
+#define CFG_INFO_VOLT(id) { &sensor_dev_attr_in##id##_input.dev_attr, \
+ &sensor_dev_attr_in##id##_min.dev_attr, \
+ &sensor_dev_attr_in##id##_max.dev_attr }
+
+struct str_device_attr_table {
+ struct device_attribute *input;
+ struct device_attribute *min;
+ struct device_attribute *max;
+};
+
+static struct str_device_attr_table cfg_info_temp[] = {
+ { &dev_attr_temp1_input, &dev_attr_temp1_min, &dev_attr_temp1_max },
+ CFG_INFO_TEMP(2),
+ CFG_INFO_TEMP(3),
+ CFG_INFO_TEMP(4),
+ CFG_INFO_TEMP(5),
+ CFG_INFO_TEMP(6)
+};
+
+static struct str_device_attr_table cfg_info_volt[] = {
+ CFG_INFO_VOLT(0),
+ CFG_INFO_VOLT(1),
+ CFG_INFO_VOLT(2),
+ CFG_INFO_VOLT(3),
+ CFG_INFO_VOLT(4),
+ { &dev_attr_in5_input, &dev_attr_in5_min, &dev_attr_in5_max }
+};
+
+/* Fans */
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int nr = sensor_attr->index;
+ int old = vt8231_read_value(client, VT8231_REG_FANDIV);
+ long min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ down(&data->update_lock);
+ switch (val) {
+ case 1: data->fan_div[nr] = 0; break;
+ case 2: data->fan_div[nr] = 1; break;
+ case 4: data->fan_div[nr] = 2; break;
+ case 8: data->fan_div[nr] = 3; break;
+ default:
+ dev_err(&client->dev, "fan_div value %ld not supported."
+ "Choose one of 1, 2, 4 or 8!\n", val);
+ up(&data->update_lock);
+ return -EINVAL;
+ }
+
+ /* Correct the fan minimum speed */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+ old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+ vt8231_write_value(client, VT8231_REG_FANDIV, old);
+ up(&data->update_lock);
+ return count;
+}
+
+
+#define define_fan_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1)
+
+define_fan_sysfs(1);
+define_fan_sysfs(2);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static struct i2c_driver vt8231_driver = {
+ .driver = {
+ .name = "vt8231",
+ },
+ .attach_adapter = vt8231_detect,
+ .detach_client = vt8231_detach_client,
+};
+
+static struct pci_device_id vt8231_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, vt8231_pci_ids);
+
+static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+
+static struct pci_driver vt8231_pci_driver = {
+ .name = "vt8231",
+ .id_table = vt8231_pci_ids,
+ .probe = vt8231_pci_probe,
+};
+
+int vt8231_detect(struct i2c_adapter *adapter)
+{
+ struct i2c_client *client;
+ struct vt8231_data *data;
+ int err = 0, i;
+ u16 val;
+
+ /* 8231 requires multiple of 256 */
+ if (force_addr) {
+ isa_address = force_addr & 0xFF00;
+ dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
+ isa_address);
+ if (PCIBIOS_SUCCESSFUL != pci_write_config_word(s_bridge,
+ VT8231_BASE_REG, isa_address))
+ return -ENODEV;
+ }
+
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_word(s_bridge, VT8231_ENABLE_REG, &val))
+ return -ENODEV;
+
+ if (!(val & 0x0001)) {
+ dev_warn(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VT8231_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ }
+
+ /* Reserve the ISA region */
+ if (!request_region(isa_address, VT8231_EXTENT,
+ vt8231_pci_driver.name)) {
+ dev_err(&adapter->dev, "region 0x%x already in use!\n",
+ isa_address);
+ return -ENODEV;
+ }
+
+ if (!(data = kzalloc(sizeof(struct vt8231_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = isa_address;
+ client->adapter = adapter;
+ client->driver = &vt8231_driver;
+ client->dev.parent = &adapter->dev;
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
+
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ vt8231_init_client(client);
+
+ /* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
+ /* Must update device information to find out the config field */
+ data->uch_config = vt8231_read_value(client, VT8231_REG_UCH_CONFIG);
+
+ for (i = 0; i < ARRAY_SIZE(cfg_info_temp); i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ device_create_file(&client->dev,
+ cfg_info_temp[i].input);
+ device_create_file(&client->dev, cfg_info_temp[i].max);
+ device_create_file(&client->dev, cfg_info_temp[i].min);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cfg_info_volt); i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ device_create_file(&client->dev,
+ cfg_info_volt[i].input);
+ device_create_file(&client->dev, cfg_info_volt[i].max);
+ device_create_file(&client->dev, cfg_info_volt[i].min);
+ }
+ }
+
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_min.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_div.dev_attr);
+
+ device_create_file(&client->dev, &dev_attr_alarms);
+ return 0;
+
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit_release:
+ release_region(isa_address, VT8231_EXTENT);
+ return err;
+}
+
+static int vt8231_detach_client(struct i2c_client *client)
+{
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int err;
+
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client))) {
+ return err;
+ }
+
+ release_region(client->addr, VT8231_EXTENT);
+ kfree(data);
+
+ return 0;
+}
+
+static void vt8231_init_client(struct i2c_client *client)
+{
+ vt8231_write_value(client, VT8231_REG_TEMP1_CONFIG, 0);
+ vt8231_write_value(client, VT8231_REG_TEMP2_CONFIG, 0);
+}
+
+static struct vt8231_data *vt8231_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int i;
+ u16 low;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ for (i = 0; i < 6; i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ data->in[i] = vt8231_read_value(client,
+ regvolt[i]);
+ data->in_min[i] = vt8231_read_value(client,
+ regvoltmin[i]);
+ data->in_max[i] = vt8231_read_value(client,
+ regvoltmax[i]);
+ }
+ }
+ for (i = 0; i < 2; i++) {
+ data->fan[i] = vt8231_read_value(client,
+ VT8231_REG_FAN(i));
+ data->fan_min[i] = vt8231_read_value(client,
+ VT8231_REG_FAN_MIN(i));
+ }
+
+ low = vt8231_read_value(client, VT8231_REG_TEMP_LOW01);
+ low = (low >> 6) | ((low & 0x30) >> 2)
+ | (vt8231_read_value(client, VT8231_REG_TEMP_LOW25) << 4);
+ for (i = 0; i < 6; i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ data->temp[i] = (vt8231_read_value(client,
+ regtemp[i]) << 2)
+ | ((low >> (2 * i)) & 0x03);
+ data->temp_max[i] = vt8231_read_value(client,
+ regtempmax[i]);
+ data->temp_min[i] = vt8231_read_value(client,
+ regtempmin[i]);
+ }
+ }
+
+ i = vt8231_read_value(client, VT8231_REG_FANDIV);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = i >> 6;
+ data->alarms = vt8231_read_value(client, VT8231_REG_ALARM1) |
+ (vt8231_read_value(client, VT8231_REG_ALARM2) << 8);
+
+ /* Set alarm flags correctly */
+ if (!data->fan[0] && data->fan_min[0]) {
+ data->alarms |= 0x40;
+ } else if (data->fan[0] && !data->fan_min[0]) {
+ data->alarms &= ~0x40;
+ }
+
+ if (!data->fan[1] && data->fan_min[1]) {
+ data->alarms |= 0x80;
+ } else if (data->fan[1] && !data->fan_min[1]) {
+ data->alarms &= ~0x80;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ u16 val;
+
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
+ &val))
+ return -ENODEV;
+
+ isa_address = val & ~(VT8231_EXTENT - 1);
+ if (isa_address == 0 && force_addr == 0) {
+ dev_err(&dev->dev, "base address not set -\
+ upgrade BIOS or use force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+
+ s_bridge = pci_dev_get(dev);
+
+ if (i2c_isa_add_driver(&vt8231_driver)) {
+ pci_dev_put(s_bridge);
+ s_bridge = NULL;
+ }
+
+ /* Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+ return -ENODEV;
+}
+
+static int __init sm_vt8231_init(void)
+{
+ return pci_module_init(&vt8231_pci_driver);
+}
+
+static void __exit sm_vt8231_exit(void)
+{
+ pci_unregister_driver(&vt8231_pci_driver);
+ if (s_bridge != NULL) {
+ i2c_isa_del_driver(&vt8231_driver);
+ pci_dev_put(s_bridge);
+ s_bridge = NULL;
+ }
+}
+
+MODULE_AUTHOR("Roger Lucas <roger@planbit.co.uk>");
+MODULE_DESCRIPTION("VT8231 sensors");
+MODULE_LICENSE("GPL");
+
+module_init(sm_vt8231_init);
+module_exit(sm_vt8231_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index eee22a5..12d79f5 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -676,7 +676,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
int i, err = 0;
if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
- w83627ehf_driver.name)) {
+ w83627ehf_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
@@ -785,8 +785,9 @@ static int w83627ehf_detach_client(struct i2c_client *client)
}
static struct i2c_driver w83627ehf_driver = {
- .owner = THIS_MODULE,
- .name = "w83627ehf",
+ .driver = {
+ .name = "w83627ehf",
+ },
.attach_adapter = w83627ehf_detect,
.detach_client = w83627ehf_detach_client,
};
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index bbb3dcd..7ea441d4 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -332,8 +332,9 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev);
static void w83627hf_init_client(struct i2c_client *client);
static struct i2c_driver w83627hf_driver = {
- .owner = THIS_MODULE,
- .name = "w83627hf",
+ .driver = {
+ .name = "w83627hf",
+ },
.attach_adapter = w83627hf_detect,
.detach_client = w83627hf_detach_client,
};
@@ -1009,7 +1010,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
address = force_addr & WINB_ALIGNMENT;
if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
- w83627hf_driver.name)) {
+ w83627hf_driver.driver.name)) {
err = -EBUSY;
goto ERROR0;
}
@@ -1122,11 +1123,10 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
if (kind != w83697hf)
device_create_file_temp(new_client, 3);
- if (kind != w83697hf)
+ if (kind != w83697hf && data->vid != 0xff) {
device_create_file_vid(new_client);
-
- if (kind != w83697hf)
device_create_file_vrm(new_client);
+ }
device_create_file_fan_div(new_client, 1);
device_create_file_fan_div(new_client, 2);
@@ -1232,7 +1232,7 @@ static int w83627thf_read_gpio5(struct i2c_client *client)
/* Make sure the pins are configured for input
There must be at least five (VRM 9), and possibly 6 (VRM 10) */
- sel = superio_inb(W83627THF_GPIO5_IOSR);
+ sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
if ((sel & 0x1f) != 0x1f) {
dev_dbg(&client->dev, "GPIO5 not configured for VID "
"function\n");
@@ -1323,19 +1323,18 @@ static void w83627hf_init_client(struct i2c_client *client)
int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
} else if (w83627thf == data->type) {
- data->vid = w83627thf_read_gpio5(client) & 0x3f;
+ data->vid = w83627thf_read_gpio5(client);
}
/* Read VRM & OVT Config only once */
if (w83627thf == data->type || w83637hf == data->type) {
data->vrm_ovt =
w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
- data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
- } else {
- /* Convert VID to voltage based on default VRM */
- data->vrm = vid_which_vrm();
}
+ /* Convert VID to voltage based on VRM */
+ data->vrm = vid_which_vrm();
+
tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
for (i = 1; i <= 3; i++) {
if (!(tmp & BIT_SCFG1[i - 1])) {
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index ffdb3a0..5571148 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -269,17 +269,18 @@ static struct w83781d_data *w83781d_update_device(struct device *dev);
static void w83781d_init_client(struct i2c_client *client);
static struct i2c_driver w83781d_driver = {
- .owner = THIS_MODULE,
- .name = "w83781d",
+ .driver = {
+ .name = "w83781d",
+ },
.id = I2C_DRIVERID_W83781D,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = w83781d_attach_adapter,
.detach_client = w83781d_detach_client,
};
static struct i2c_driver w83781d_isa_driver = {
- .owner = THIS_MODULE,
- .name = "w83781d-isa",
+ .driver = {
+ .name = "w83781d-isa",
+ },
.attach_adapter = w83781d_isa_attach_adapter,
.detach_client = w83781d_detach_client,
};
@@ -1012,7 +1013,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
if (is_isa)
if (!request_region(address, W83781D_EXTENT,
- w83781d_isa_driver.name)) {
+ w83781d_isa_driver.driver.name)) {
dev_dbg(&adapter->dev, "Request of region "
"0x%x-0x%x for w83781d failed\n", address,
address + W83781D_EXTENT - 1);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 1ba0726..b176bf0 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -269,7 +269,6 @@ DIV_TO_REG(long val)
struct w83792d_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
enum chips type;
struct semaphore update_lock;
@@ -282,7 +281,7 @@ struct w83792d_data {
u8 in[9]; /* Register value */
u8 in_max[9]; /* Register value */
u8 in_min[9]; /* Register value */
- u8 low_bits[2]; /* Additional resolution to voltage in0-6 */
+ u16 low_bits; /* Additional resolution to voltage in6-0 */
u8 fan[7]; /* Register value */
u8 fan_min[7]; /* Register value */
u8 temp1[3]; /* current, over, thyst */
@@ -317,45 +316,17 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
static void w83792d_init_client(struct i2c_client *client);
static struct i2c_driver w83792d_driver = {
- .owner = THIS_MODULE,
- .name = "w83792d",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "w83792d",
+ },
.attach_adapter = w83792d_attach_adapter,
.detach_client = w83792d_detach_client,
};
-static long in_count_from_reg(int nr, struct w83792d_data *data)
+static inline long in_count_from_reg(int nr, struct w83792d_data *data)
{
- u16 vol_count = data->in[nr];
- u16 low_bits = 0;
- vol_count = (vol_count << 2);
- switch (nr)
- {
- case 0: /* vin0 */
- low_bits = (data->low_bits[0]) & 0x03;
- break;
- case 1: /* vin1 */
- low_bits = ((data->low_bits[0]) & 0x0c) >> 2;
- break;
- case 2: /* vin2 */
- low_bits = ((data->low_bits[0]) & 0x30) >> 4;
- break;
- case 3: /* vin3 */
- low_bits = ((data->low_bits[0]) & 0xc0) >> 6;
- break;
- case 4: /* vin4 */
- low_bits = (data->low_bits[1]) & 0x03;
- break;
- case 5: /* vin5 */
- low_bits = ((data->low_bits[1]) & 0x0c) >> 2;
- break;
- case 6: /* vin6 */
- low_bits = ((data->low_bits[1]) & 0x30) >> 4;
- default:
- break;
- }
- vol_count = vol_count | low_bits;
- return vol_count;
+ /* in7 and in8 do not have low bits, but the formula still works */
+ return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03));
}
/* following are the sysfs callback functions */
@@ -1192,7 +1163,6 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
new_client->adapter = adapter;
new_client->driver = &w83792d_driver;
new_client->flags = 0;
@@ -1243,7 +1213,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
goto ERROR1;
}
val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID);
- if (val1 == 0x7a && address >= 0x2c) {
+ if (val1 == 0x7a) {
kind = w83792d;
} else {
if (kind == 0)
@@ -1416,26 +1386,17 @@ w83792d_detach_client(struct i2c_client *client)
return 0;
}
-/* The SMBus locks itself, usually, but nothing may access the Winbond between
- bank switches. ISA access must always be locked explicitly!
- We ignore the W83792D BUSY flag at this moment - it could lead to deadlocks,
- would slow down the W83792D access and should not be necessary.
- There are some ugly typecasts here, but the good news is - they should
- nowhere else be necessary! */
-static int
-w83792d_read_value(struct i2c_client *client, u8 reg)
+/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
+ but the driver only accesses registers in bank 0, so we don't have
+ to switch banks and lock access between switches. */
+static int w83792d_read_value(struct i2c_client *client, u8 reg)
{
- int res=0;
- res = i2c_smbus_read_byte_data(client, reg);
-
- return res;
+ return i2c_smbus_read_byte_data(client, reg);
}
-static int
-w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
+static int w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
{
- i2c_smbus_write_byte_data(client, reg, value);
- return 0;
+ return i2c_smbus_write_byte_data(client, reg, value);
}
static void
@@ -1492,10 +1453,10 @@ static struct w83792d_data *w83792d_update_device(struct device *dev)
data->in_min[i] = w83792d_read_value(client,
W83792D_REG_IN_MIN[i]);
}
- data->low_bits[0] = w83792d_read_value(client,
- W83792D_REG_LOW_BITS1);
- data->low_bits[1] = w83792d_read_value(client,
- W83792D_REG_LOW_BITS2);
+ data->low_bits = w83792d_read_value(client,
+ W83792D_REG_LOW_BITS1) +
+ (w83792d_read_value(client,
+ W83792D_REG_LOW_BITS2) << 8);
for (i = 0; i < 7; i++) {
/* Update the Fan measured value and limits */
data->fan[i] = w83792d_read_value(client,
@@ -1506,7 +1467,7 @@ static struct w83792d_data *w83792d_update_device(struct device *dev)
pwm_array_tmp[i] = w83792d_read_value(client,
W83792D_REG_PWM[i]);
data->pwm[i] = pwm_array_tmp[i] & 0x0f;
- data->pwm_mode[i] = (pwm_array_tmp[i] >> 7) & 0x01;
+ data->pwm_mode[i] = pwm_array_tmp[i] >> 7;
}
reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
@@ -1607,8 +1568,8 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev)
dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
}
- dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits[0]);
- dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits[1]);
+ dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff);
+ dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8);
dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
for (i=0; i<7; i++) {
dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index f495b63..f66c0cf 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -92,10 +92,10 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);
*/
static struct i2c_driver w83l785ts_driver = {
- .owner = THIS_MODULE,
- .name = "w83l785ts",
+ .driver = {
+ .name = "w83l785ts",
+ },
.id = I2C_DRIVERID_W83L785TS,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = w83l785ts_attach_adapter,
.detach_client = w83l785ts_detach_client,
};
OpenPOWER on IntegriCloud