summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/vt8231.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/vt8231.c')
-rw-r--r--drivers/hwmon/vt8231.c164
1 files changed, 87 insertions, 77 deletions
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index eb74f377..386a845 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -1,28 +1,29 @@
/*
- vt8231.c - Part of lm_sensors, Linux kernel modules
- for hardware monitoring
+ * vt8231.c - Part of lm_sensors, Linux kernel modules
+ * for hardware monitoring
+ *
+ * Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * Aaron M. Marsh <amarsh@sdf.lonestar.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
- Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
- Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
- Aaron M. Marsh <amarsh@sdf.lonestar.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* Supports VIA VT8231 South Bridge embedded sensors
-*/
+/*
+ * Supports VIA VT8231 South Bridge embedded sensors
+ */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -50,26 +51,27 @@ static struct platform_device *pdev;
#define VT8231_BASE_REG 0x70
#define VT8231_ENABLE_REG 0x74
-/* The VT8231 registers
-
- The reset value for the input channel configuration is used (Reg 0x4A=0x07)
- which sets the selected inputs marked with '*' below if multiple options are
- possible:
-
- Voltage Mode Temperature Mode
- Sensor Linux Id Linux Id VIA Id
- -------- -------- -------- ------
- CPU Diode N/A temp1 0
- UIC1 in0 temp2 * 1
- UIC2 in1 * temp3 2
- UIC3 in2 * temp4 3
- UIC4 in3 * temp5 4
- UIC5 in4 * temp6 5
- 3.3V in5 N/A
-
- Note that the BIOS may set the configuration register to a different value
- to match the motherboard configuration.
-*/
+/*
+ * The VT8231 registers
+ *
+ * The reset value for the input channel configuration is used (Reg 0x4A=0x07)
+ * which sets the selected inputs marked with '*' below if multiple options are
+ * possible:
+ *
+ * Voltage Mode Temperature Mode
+ * Sensor Linux Id Linux Id VIA Id
+ * -------- -------- -------- ------
+ * CPU Diode N/A temp1 0
+ * UIC1 in0 temp2 * 1
+ * UIC2 in1 * temp3 2
+ * UIC3 in2 * temp4 3
+ * UIC4 in3 * temp5 4
+ * UIC5 in4 * temp6 5
+ * 3.3V in5 N/A
+ *
+ * Note that the BIOS may set the configuration register to a different value
+ * to match the motherboard configuration.
+ */
/* fans numbered 0-1 */
#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
@@ -81,13 +83,14 @@ static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
-/* Temperatures are numbered 1-6 according to the Linux kernel specification.
-**
-** In the VIA datasheet, however, the temperatures are numbered from zero.
-** Since it is important that this driver can easily be compared to the VIA
-** datasheet, we will use the VIA numbering within this driver and map the
-** kernel sysfs device name to the VIA number in the sysfs callback.
-*/
+/*
+ * Temperatures are numbered 1-6 according to the Linux kernel specification.
+ *
+ * In the VIA datasheet, however, the temperatures are numbered from zero.
+ * Since it is important that this driver can easily be compared to the VIA
+ * datasheet, we will use the VIA numbering within this driver and map the
+ * kernel sysfs device name to the VIA number in the sysfs callback.
+ */
#define VT8231_REG_TEMP_LOW01 0x49
#define VT8231_REG_TEMP_LOW25 0x4d
@@ -108,9 +111,10 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
#define VT8231_REG_TEMP1_CONFIG 0x4b
#define VT8231_REG_TEMP2_CONFIG 0x4c
-/* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
-** numbering
-*/
+/*
+ * temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
+ * numbering
+ */
#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
((ch_config) >> ((i)+1)) & 0x01)
/* voltages 0-5 */
@@ -119,24 +123,26 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
#define DIV_FROM_REG(val) (1 << (val))
-/* NB The values returned here are NOT temperatures. The calibration curves
-** for the thermistor curves are board-specific and must go in the
-** sensors.conf file. Temperature sensors are actually ten bits, but the
-** VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
-** register. The temperature value returned should have a magnitude of 3,
-** so we use the VIA scaling as the "true" scaling and use the remaining 2
-** LSBs as fractional precision.
-**
-** All the on-chip hardware temperature comparisons for the alarms are only
-** 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
-** in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
-** ignored.
-*/
-
-/******** FAN RPM CONVERSIONS ********
-** This chip saturates back at 0, not at 255 like many the other chips.
-** So, 0 means 0 RPM
-*/
+/*
+ * NB The values returned here are NOT temperatures. The calibration curves
+ * for the thermistor curves are board-specific and must go in the
+ * sensors.conf file. Temperature sensors are actually ten bits, but the
+ * VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
+ * register. The temperature value returned should have a magnitude of 3,
+ * so we use the VIA scaling as the "true" scaling and use the remaining 2
+ * LSBs as fractional precision.
+ *
+ * All the on-chip hardware temperature comparisons for the alarms are only
+ * 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
+ * in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
+ * ignored.
+ */
+
+/*
+ ****** FAN RPM CONVERSIONS ********
+ * This chip saturates back at 0, not at 255 like many the other chips.
+ * So, 0 means 0 RPM
+ */
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == 0)
@@ -463,9 +469,10 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
return count;
}
-/* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
-** temperature sensor numbering (0-5)
-*/
+/*
+ * Note that these map the Linux temperature sensor numbering (1-6) to the VIA
+ * temperature sensor numbering (0-5)
+ */
#define define_temperature_sysfs(offset) \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp, NULL, offset - 1); \
@@ -1032,13 +1039,16 @@ static int __devinit vt8231_pci_probe(struct pci_dev *dev,
if (vt8231_device_add(address))
goto exit_unregister;
- /* Always return failure here. This is to allow other drivers to bind
+ /*
+ * Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
- /* We do, however, mark ourselves as using the PCI device to stop it
- getting unloaded. */
+ /*
+ * We do, however, mark ourselves as using the PCI device to stop it
+ * getting unloaded.
+ */
s_bridge = pci_dev_get(dev);
return -ENODEV;
OpenPOWER on IntegriCloud