diff options
Diffstat (limited to 'drivers/hwmon/smsc47m1.c')
| -rw-r--r-- | drivers/hwmon/smsc47m1.c | 593 |
1 files changed, 593 insertions, 0 deletions
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c new file mode 100644 index 0000000..897117a --- /dev/null +++ b/drivers/hwmon/smsc47m1.c @@ -0,0 +1,593 @@ +/* + smsc47m1.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x + Super-I/O chips. + + Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com> + and Jean Delvare + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/init.h> +#include <asm/io.h> + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +/* Address is autodetected, there is no default value */ +static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; +static struct i2c_force_data forces[] = {{NULL}}; + +enum chips { any_chip, smsc47m1 }; +static struct i2c_address_data addr_data = { + .normal_i2c = normal_i2c, + .normal_isa = normal_isa, + .forces = forces, +}; + +/* Super-I/0 registers and commands */ + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +/* logical device for fans is 0x0A */ +#define superio_select() superio_outb(0x07, 0x0A) + +static inline void +superio_enter(void) +{ + outb(0x55, REG); +} + +static inline void +superio_exit(void) +{ + outb(0xAA, REG); +} + +#define SUPERIO_REG_ACT 0x30 +#define SUPERIO_REG_BASE 0x60 +#define SUPERIO_REG_DEVID 0x20 + +/* Logical device registers */ + +#define SMSC_EXTENT 0x80 + +/* nr is 0 or 1 in the macros below */ +#define SMSC47M1_REG_ALARM 0x04 +#define SMSC47M1_REG_TPIN(nr) (0x34 - (nr)) +#define SMSC47M1_REG_PPIN(nr) (0x36 - (nr)) +#define SMSC47M1_REG_PWM(nr) (0x56 + (nr)) +#define SMSC47M1_REG_FANDIV 0x58 +#define SMSC47M1_REG_FAN(nr) (0x59 + (nr)) +#define SMSC47M1_REG_FAN_PRELOAD(nr) (0x5B + (nr)) + +#define MIN_FROM_REG(reg,div) ((reg)>=192 ? 0 : \ + 983040/((192-(reg))*(div))) +#define FAN_FROM_REG(reg,div,preload) ((reg)<=(preload) || (reg)==255 ? 0 : \ + 983040/(((reg)-(preload))*(div))) +#define DIV_FROM_REG(reg) (1 << (reg)) +#define PWM_FROM_REG(reg) (((reg) & 0x7E) << 1) +#define PWM_EN_FROM_REG(reg) ((~(reg)) & 0x01) +#define PWM_TO_REG(reg) (((reg) >> 1) & 0x7E) + +struct smsc47m1_data { + struct i2c_client client; + struct semaphore lock; + + struct semaphore update_lock; + unsigned long last_updated; /* In jiffies */ + + u8 fan[2]; /* Register value */ + u8 fan_preload[2]; /* Register value */ + u8 fan_div[2]; /* Register encoding, shifted right */ + u8 alarms; /* Register encoding */ + u8 pwm[2]; /* Register value (bit 7 is enable) */ +}; + + +static int smsc47m1_attach_adapter(struct i2c_adapter *adapter); +static int smsc47m1_find(int *address); +static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind); +static int smsc47m1_detach_client(struct i2c_client *client); + +static int smsc47m1_read_value(struct i2c_client *client, u8 reg); +static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value); + +static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, + int init); + + +static struct i2c_driver smsc47m1_driver = { + .owner = THIS_MODULE, + .name = "smsc47m1", + .id = I2C_DRIVERID_SMSC47M1, + .flags = I2C_DF_NOTIFY, + .attach_adapter = smsc47m1_attach_adapter, + .detach_client = smsc47m1_detach_client, +}; + +/* nr is 0 or 1 in the callback functions below */ + +static ssize_t get_fan(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + /* This chip (stupidly) stops monitoring fan speed if PWM is + enabled and duty cycle is 0%. This is fine if the monitoring + and control concern the same fan, but troublesome if they are + not (which could as well happen). */ + int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 : + FAN_FROM_REG(data->fan[nr], + DIV_FROM_REG(data->fan_div[nr]), + data->fan_preload[nr]); + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t get_fan_min(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + int rpm = MIN_FROM_REG(data->fan_preload[nr], + DIV_FROM_REG(data->fan_div[nr])); + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t get_fan_div(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} + +static ssize_t get_pwm(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); +} + +static ssize_t get_pwm_en(struct device *dev, char *buf, int nr) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr])); +} + +static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); + return sprintf(buf, "%d\n", data->alarms); +} + +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + long rpmdiv, val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]); + + if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) { + up(&data->update_lock); + return -EINVAL; + } + + data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv); + smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), + data->fan_preload[nr]); + up(&data->update_lock); + + return count; +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan clock divider. This follows the principle + of least suprise; the user doesn't expect the fan minimum to change just + because the divider changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long new_div = simple_strtol(buf, NULL, 10), tmp; + u8 old_div = DIV_FROM_REG(data->fan_div[nr]); + + if (new_div == old_div) /* No change */ + return count; + + down(&data->update_lock); + switch (new_div) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + up(&data->update_lock); + return -EINVAL; + } + + tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F; + tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6); + smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp); + + /* Preserve fan min */ + tmp = 192 - (old_div * (192 - data->fan_preload[nr]) + + new_div / 2) / new_div; + data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191); + smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), + data->fan_preload[nr]); + up(&data->update_lock); + + return count; +} + +static ssize_t set_pwm(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long val = simple_strtol(buf, NULL, 10); + + if (val < 0 || val > 255) + return -EINVAL; + + down(&data->update_lock); + data->pwm[nr] &= 0x81; /* Preserve additional bits */ + data->pwm[nr] |= PWM_TO_REG(val); + smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), + data->pwm[nr]); + up(&data->update_lock); + + return count; +} + +static ssize_t set_pwm_en(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + long val = simple_strtol(buf, NULL, 10); + + if (val != 0 && val != 1) + return -EINVAL; + + down(&data->update_lock); + data->pwm[nr] &= 0xFE; /* preserve the other bits */ + data->pwm[nr] |= !val; + smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), + data->pwm[nr]); + up(&data->update_lock); + + return count; +} + +#define fan_present(offset) \ +static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return get_fan(dev, buf, offset - 1); \ +} \ +static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return get_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return get_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return get_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + return get_pwm_en(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_en(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset, \ + NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + get_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + get_fan##offset##_div, set_fan##offset##_div); \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + get_pwm##offset, set_pwm##offset); \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + get_pwm##offset##_en, set_pwm##offset##_en); + +fan_present(1); +fan_present(2); + +static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); + +static int smsc47m1_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, smsc47m1_detect); +} + +static int smsc47m1_find(int *address) +{ + u8 val; + + superio_enter(); + val = superio_inb(SUPERIO_REG_DEVID); + + /* + * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id + * 0x5F) and LPC47B27x (device id 0x51) have fan control. + * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" + * can do much more besides (device id 0x60). + */ + if (val == 0x51) + printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n"); + else if (val == 0x59) + printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n"); + else if (val == 0x5F) + printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n"); + else if (val == 0x60) + printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n"); + else { + superio_exit(); + return -ENODEV; + } + + superio_select(); + *address = (superio_inb(SUPERIO_REG_BASE) << 8) + | superio_inb(SUPERIO_REG_BASE + 1); + val = superio_inb(SUPERIO_REG_ACT); + if (*address == 0 || (val & 0x01) == 0) { + printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n"); + superio_exit(); + return -ENODEV; + } + + superio_exit(); + return 0; +} + +static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct smsc47m1_data *data; + int err = 0; + int fan1, fan2, pwm1, pwm2; + + if (!i2c_is_isa_adapter(adapter)) { + return 0; + } + + if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) { + dev_err(&adapter->dev, "Region 0x%x already in use!\n", address); + return -EBUSY; + } + + if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { + err = -ENOMEM; + goto error_release; + } + memset(data, 0x00, sizeof(struct smsc47m1_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + init_MUTEX(&data->lock); + new_client->adapter = adapter; + new_client->driver = &smsc47m1_driver; + new_client->flags = 0; + + strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE); + init_MUTEX(&data->update_lock); + + /* If no function is properly configured, there's no point in + actually registering the chip. */ + fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05) + == 0x05; + fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05) + == 0x05; + pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05) + == 0x04; + pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05) + == 0x04; + if (!(fan1 || fan2 || pwm1 || pwm2)) { + dev_warn(&new_client->dev, "Device is not configured, will not use\n"); + err = -ENODEV; + goto error_free; + } + + if ((err = i2c_attach_client(new_client))) + goto error_free; + + /* Some values (fan min, clock dividers, pwm registers) may be + needed before any update is triggered, so we better read them + at least once here. We don't usually do it that way, but in + this particular case, manually reading 5 registers out of 8 + doesn't make much sense and we're better using the existing + function. */ + smsc47m1_update_device(&new_client->dev, 1); + + if (fan1) { + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + } else + dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, " + "skipping\n"); + + if (fan2) { + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + } else + dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, " + "skipping\n"); + + if (pwm1) { + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + } else + dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, " + "skipping\n"); + if (pwm2) { + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + } else + dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, " + "skipping\n"); + + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +error_free: + kfree(new_client); +error_release: + release_region(address, SMSC_EXTENT); + return err; +} + +static int smsc47m1_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + release_region(client->addr, SMSC_EXTENT); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static int smsc47m1_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + res = inb_p(client->addr + reg); + up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + return res; +} + +static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); + outb_p(value, client->addr + reg); + up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); +} + +static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, + int init) +{ + struct i2c_client *client = to_i2c_client(dev); + struct smsc47m1_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) { + int i; + + for (i = 0; i < 2; i++) { + data->fan[i] = smsc47m1_read_value(client, + SMSC47M1_REG_FAN(i)); + data->fan_preload[i] = smsc47m1_read_value(client, + SMSC47M1_REG_FAN_PRELOAD(i)); + data->pwm[i] = smsc47m1_read_value(client, + SMSC47M1_REG_PWM(i)); + } + + i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = i >> 6; + + data->alarms = smsc47m1_read_value(client, + SMSC47M1_REG_ALARM) >> 6; + /* Clear alarms if needed */ + if (data->alarms) + smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0); + + data->last_updated = jiffies; + } + + up(&data->update_lock); + return data; +} + +static int __init sm_smsc47m1_init(void) +{ + if (smsc47m1_find(normal_isa)) { + return -ENODEV; + } + + return i2c_add_driver(&smsc47m1_driver); +} + +static void __exit sm_smsc47m1_exit(void) +{ + i2c_del_driver(&smsc47m1_driver); +} + +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver"); +MODULE_LICENSE("GPL"); + +module_init(sm_smsc47m1_init); +module_exit(sm_smsc47m1_exit); |
