diff options
Diffstat (limited to 'drivers/hwmon/adt7410.c')
-rw-r--r-- | drivers/hwmon/adt7410.c | 442 |
1 files changed, 31 insertions, 411 deletions
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c index 99a7290..0dc066a 100644 --- a/drivers/hwmon/adt7410.c +++ b/drivers/hwmon/adt7410.c @@ -1,460 +1,80 @@ /* - * adt7410.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * This driver handles the ADT7410 and compatible digital temperature sensors. - * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22 - * based on lm75.c by Frodo Looijaard <frodol@dds.nl> - * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com> + * ADT7410/ADT7420 digital temperature sensor driver * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright 2012-2013 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Licensed under the GPL-2 or later. */ #include <linux/module.h> #include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/delay.h> - -/* - * ADT7410 registers definition - */ - -#define ADT7410_TEMPERATURE 0 -#define ADT7410_STATUS 2 -#define ADT7410_CONFIG 3 -#define ADT7410_T_ALARM_HIGH 4 -#define ADT7410_T_ALARM_LOW 6 -#define ADT7410_T_CRIT 8 -#define ADT7410_T_HYST 0xA - -/* - * ADT7410 status - */ -#define ADT7410_STAT_T_LOW (1 << 4) -#define ADT7410_STAT_T_HIGH (1 << 5) -#define ADT7410_STAT_T_CRIT (1 << 6) -#define ADT7410_STAT_NOT_RDY (1 << 7) - -/* - * ADT7410 config - */ -#define ADT7410_FAULT_QUEUE_MASK (1 << 0 | 1 << 1) -#define ADT7410_CT_POLARITY (1 << 2) -#define ADT7410_INT_POLARITY (1 << 3) -#define ADT7410_EVENT_MODE (1 << 4) -#define ADT7410_MODE_MASK (1 << 5 | 1 << 6) -#define ADT7410_FULL (0 << 5 | 0 << 6) -#define ADT7410_PD (1 << 5 | 1 << 6) -#define ADT7410_RESOLUTION (1 << 7) - -/* - * ADT7410 masks - */ -#define ADT7410_T13_VALUE_MASK 0xFFF8 -#define ADT7410_T_HYST_MASK 0xF - -/* straight from the datasheet */ -#define ADT7410_TEMP_MIN (-55000) -#define ADT7410_TEMP_MAX 150000 - -enum adt7410_type { /* keep sorted in alphabetical order */ - adt7410, -}; - -static const u8 ADT7410_REG_TEMP[4] = { - ADT7410_TEMPERATURE, /* input */ - ADT7410_T_ALARM_HIGH, /* high */ - ADT7410_T_ALARM_LOW, /* low */ - ADT7410_T_CRIT, /* critical */ -}; - -/* Each client has this additional data */ -struct adt7410_data { - struct device *hwmon_dev; - struct mutex update_lock; - u8 config; - u8 oldconfig; - bool valid; /* true if registers valid */ - unsigned long last_updated; /* In jiffies */ - s16 temp[4]; /* Register values, - 0 = input - 1 = high - 2 = low - 3 = critical */ - u8 hyst; /* hysteresis offset */ -}; - -/* - * adt7410 register access by I2C - */ -static int adt7410_temp_ready(struct i2c_client *client) -{ - int i, status; - - for (i = 0; i < 6; i++) { - status = i2c_smbus_read_byte_data(client, ADT7410_STATUS); - if (status < 0) - return status; - if (!(status & ADT7410_STAT_NOT_RDY)) - return 0; - msleep(60); - } - return -ETIMEDOUT; -} - -static struct adt7410_data *adt7410_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adt7410_data *data = i2c_get_clientdata(client); - struct adt7410_data *ret = data; - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - int i, status; - dev_dbg(&client->dev, "Starting update\n"); +#include "adt7x10.h" - status = adt7410_temp_ready(client); /* check for new value */ - if (unlikely(status)) { - ret = ERR_PTR(status); - goto abort; - } - for (i = 0; i < ARRAY_SIZE(data->temp); i++) { - status = i2c_smbus_read_word_swapped(client, - ADT7410_REG_TEMP[i]); - if (unlikely(status < 0)) { - dev_dbg(dev, - "Failed to read value: reg %d, error %d\n", - ADT7410_REG_TEMP[i], status); - ret = ERR_PTR(status); - goto abort; - } - data->temp[i] = status; - } - status = i2c_smbus_read_byte_data(client, ADT7410_T_HYST); - if (unlikely(status < 0)) { - dev_dbg(dev, - "Failed to read value: reg %d, error %d\n", - ADT7410_T_HYST, status); - ret = ERR_PTR(status); - goto abort; - } - data->hyst = status; - data->last_updated = jiffies; - data->valid = true; - } - -abort: - mutex_unlock(&data->update_lock); - return ret; -} - -static s16 ADT7410_TEMP_TO_REG(long temp) +static int adt7410_i2c_read_word(struct device *dev, u8 reg) { - return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7410_TEMP_MIN, - ADT7410_TEMP_MAX) * 128, 1000); + return i2c_smbus_read_word_swapped(to_i2c_client(dev), reg); } -static int ADT7410_REG_TO_TEMP(struct adt7410_data *data, s16 reg) +static int adt7410_i2c_write_word(struct device *dev, u8 reg, u16 data) { - /* in 13 bit mode, bits 0-2 are status flags - mask them out */ - if (!(data->config & ADT7410_RESOLUTION)) - reg &= ADT7410_T13_VALUE_MASK; - /* - * temperature is stored in twos complement format, in steps of - * 1/128°C - */ - return DIV_ROUND_CLOSEST(reg * 1000, 128); + return i2c_smbus_write_word_swapped(to_i2c_client(dev), reg, data); } -/*-----------------------------------------------------------------------*/ - -/* sysfs attributes for hwmon */ - -static ssize_t adt7410_show_temp(struct device *dev, - struct device_attribute *da, char *buf) +static int adt7410_i2c_read_byte(struct device *dev, u8 reg) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct adt7410_data *data = adt7410_update_device(dev); - - if (IS_ERR(data)) - return PTR_ERR(data); - - return sprintf(buf, "%d\n", ADT7410_REG_TO_TEMP(data, - data->temp[attr->index])); + return i2c_smbus_read_byte_data(to_i2c_client(dev), reg); } -static ssize_t adt7410_set_temp(struct device *dev, - struct device_attribute *da, - const char *buf, size_t count) +static int adt7410_i2c_write_byte(struct device *dev, u8 reg, u8 data) { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct i2c_client *client = to_i2c_client(dev); - struct adt7410_data *data = i2c_get_clientdata(client); - int nr = attr->index; - long temp; - int ret; - - ret = kstrtol(buf, 10, &temp); - if (ret) - return ret; - - mutex_lock(&data->update_lock); - data->temp[nr] = ADT7410_TEMP_TO_REG(temp); - ret = i2c_smbus_write_word_swapped(client, ADT7410_REG_TEMP[nr], - data->temp[nr]); - if (ret) - count = ret; - mutex_unlock(&data->update_lock); - return count; + return i2c_smbus_write_byte_data(to_i2c_client(dev), reg, data); } -static ssize_t adt7410_show_t_hyst(struct device *dev, - struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct adt7410_data *data; - int nr = attr->index; - int hyst; - - data = adt7410_update_device(dev); - if (IS_ERR(data)) - return PTR_ERR(data); - hyst = (data->hyst & ADT7410_T_HYST_MASK) * 1000; - - /* - * hysteresis is stored as a 4 bit offset in the device, convert it - * to an absolute value - */ - if (nr == 2) /* min has positive offset, others have negative */ - hyst = -hyst; - return sprintf(buf, "%d\n", - ADT7410_REG_TO_TEMP(data, data->temp[nr]) - hyst); -} - -static ssize_t adt7410_set_t_hyst(struct device *dev, - struct device_attribute *da, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adt7410_data *data = i2c_get_clientdata(client); - int limit, ret; - long hyst; - - ret = kstrtol(buf, 10, &hyst); - if (ret) - return ret; - /* convert absolute hysteresis value to a 4 bit delta value */ - limit = ADT7410_REG_TO_TEMP(data, data->temp[1]); - hyst = clamp_val(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX); - data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), 0, - ADT7410_T_HYST_MASK); - ret = i2c_smbus_write_byte_data(client, ADT7410_T_HYST, data->hyst); - if (ret) - return ret; - - return count; -} - -static ssize_t adt7410_show_alarm(struct device *dev, - struct device_attribute *da, - char *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - int ret; - - ret = i2c_smbus_read_byte_data(client, ADT7410_STATUS); - if (ret < 0) - return ret; - - return sprintf(buf, "%d\n", !!(ret & attr->index)); -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7410_show_temp, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - adt7410_show_temp, adt7410_set_temp, 1); -static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, - adt7410_show_temp, adt7410_set_temp, 2); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, - adt7410_show_temp, adt7410_set_temp, 3); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - adt7410_show_t_hyst, adt7410_set_t_hyst, 1); -static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO, - adt7410_show_t_hyst, NULL, 2); -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, - adt7410_show_t_hyst, NULL, 3); -static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7410_show_alarm, - NULL, ADT7410_STAT_T_LOW); -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7410_show_alarm, - NULL, ADT7410_STAT_T_HIGH); -static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7410_show_alarm, - NULL, ADT7410_STAT_T_CRIT); - -static struct attribute *adt7410_attributes[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - NULL +static const struct adt7x10_ops adt7410_i2c_ops = { + .read_word = adt7410_i2c_read_word, + .write_word = adt7410_i2c_write_word, + .read_byte = adt7410_i2c_read_byte, + .write_byte = adt7410_i2c_write_byte, }; -static const struct attribute_group adt7410_group = { - .attrs = adt7410_attributes, -}; - -/*-----------------------------------------------------------------------*/ - -/* device probe and removal */ - -static int adt7410_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int adt7410_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct adt7410_data *data; - int ret; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; - data = devm_kzalloc(&client->dev, sizeof(struct adt7410_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* configure as specified */ - ret = i2c_smbus_read_byte_data(client, ADT7410_CONFIG); - if (ret < 0) { - dev_dbg(&client->dev, "Can't read config? %d\n", ret); - return ret; - } - data->oldconfig = ret; - /* - * Set to 16 bit resolution, continous conversion and comparator mode. - */ - ret &= ~ADT7410_MODE_MASK; - data->config = ret | ADT7410_FULL | ADT7410_RESOLUTION | - ADT7410_EVENT_MODE; - if (data->config != data->oldconfig) { - ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, - data->config); - if (ret) - return ret; - } - dev_dbg(&client->dev, "Config %02x\n", data->config); - - /* Register sysfs hooks */ - ret = sysfs_create_group(&client->dev.kobj, &adt7410_group); - if (ret) - goto exit_restore; - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - ret = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - - dev_info(&client->dev, "sensor '%s'\n", client->name); - - return 0; - -exit_remove: - sysfs_remove_group(&client->dev.kobj, &adt7410_group); -exit_restore: - i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->oldconfig); - return ret; + return adt7x10_probe(&client->dev, NULL, client->irq, &adt7410_i2c_ops); } -static int adt7410_remove(struct i2c_client *client) +static int adt7410_i2c_remove(struct i2c_client *client) { - struct adt7410_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &adt7410_group); - if (data->oldconfig != data->config) - i2c_smbus_write_byte_data(client, ADT7410_CONFIG, - data->oldconfig); - return 0; + return adt7x10_remove(&client->dev, client->irq); } static const struct i2c_device_id adt7410_ids[] = { - { "adt7410", adt7410, }, - { "adt7420", adt7410, }, - { /* LIST END */ } + { "adt7410", 0 }, + { "adt7420", 0 }, + {} }; MODULE_DEVICE_TABLE(i2c, adt7410_ids); -#ifdef CONFIG_PM_SLEEP -static int adt7410_suspend(struct device *dev) -{ - int ret; - struct i2c_client *client = to_i2c_client(dev); - struct adt7410_data *data = i2c_get_clientdata(client); - - ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, - data->config | ADT7410_PD); - return ret; -} - -static int adt7410_resume(struct device *dev) -{ - int ret; - struct i2c_client *client = to_i2c_client(dev); - struct adt7410_data *data = i2c_get_clientdata(client); - - ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config); - return ret; -} - -static SIMPLE_DEV_PM_OPS(adt7410_dev_pm_ops, adt7410_suspend, adt7410_resume); - -#define ADT7410_DEV_PM_OPS (&adt7410_dev_pm_ops) -#else -#define ADT7410_DEV_PM_OPS NULL -#endif /* CONFIG_PM */ - static struct i2c_driver adt7410_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "adt7410", - .pm = ADT7410_DEV_PM_OPS, + .pm = ADT7X10_DEV_PM_OPS, }, - .probe = adt7410_probe, - .remove = adt7410_remove, + .probe = adt7410_i2c_probe, + .remove = adt7410_i2c_remove, .id_table = adt7410_ids, .address_list = I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b), }; - module_i2c_driver(adt7410_driver); -MODULE_AUTHOR("Hartmut Knaack"); -MODULE_DESCRIPTION("ADT7410/ADT7420 driver"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("ADT7410/AD7420 driver"); MODULE_LICENSE("GPL"); |