summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/adm1026.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/adm1026.c')
-rw-r--r--drivers/hwmon/adm1026.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 0f068e7..ea09046 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -197,7 +197,7 @@ static int adm1026_scaling[] = { /* .001 Volts */
};
#define NEG12_OFFSET 16000
#define SCALE(val, from, to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n, val) (SENSORS_LIMIT(SCALE(val, adm1026_scaling[n], 192),\
+#define INS_TO_REG(n, val) (clamp_val(SCALE(val, adm1026_scaling[n], 192),\
0, 255))
#define INS_FROM_REG(n, val) (SCALE(val, 192, adm1026_scaling[n]))
@@ -207,7 +207,7 @@ static int adm1026_scaling[] = { /* .001 Volts */
* 22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
*/
#define FAN_TO_REG(val, div) ((val) <= 0 ? 0xff : \
- SENSORS_LIMIT(1350000 / ((val) * (div)), \
+ clamp_val(1350000 / ((val) * (div)), \
1, 254))
#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 0xff ? 0 : \
1350000 / ((val) * (div)))
@@ -215,14 +215,14 @@ static int adm1026_scaling[] = { /* .001 Volts */
#define DIV_TO_REG(val) ((val) >= 8 ? 3 : (val) >= 4 ? 2 : (val) >= 2 ? 1 : 0)
/* Temperature is reported in 1 degC increments */
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) + ((val) < 0 ? -500 : 500)) \
+#define TEMP_TO_REG(val) (clamp_val(((val) + ((val) < 0 ? -500 : 500)) \
/ 1000, -127, 127))
#define TEMP_FROM_REG(val) ((val) * 1000)
-#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val) + ((val) < 0 ? -500 : 500)) \
+#define OFFSET_TO_REG(val) (clamp_val(((val) + ((val) < 0 ? -500 : 500)) \
/ 1000, -127, 127))
#define OFFSET_FROM_REG(val) ((val) * 1000)
-#define PWM_TO_REG(val) (SENSORS_LIMIT(val, 0, 255))
+#define PWM_TO_REG(val) (clamp_val(val, 0, 255))
#define PWM_FROM_REG(val) (val)
#define PWM_MIN_TO_REG(val) ((val) & 0xf0)
@@ -233,7 +233,7 @@ static int adm1026_scaling[] = { /* .001 Volts */
* indicates that the DAC could be used to drive the fans, but in our
* example board (Arima HDAMA) it isn't connected to the fans at all.
*/
-#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val) * 255) + 500) / 2500), 0, 255))
+#define DAC_TO_REG(val) (clamp_val(((((val) * 255) + 500) / 2500), 0, 255))
#define DAC_FROM_REG(val) (((val) * 2500) / 255)
/*
@@ -933,7 +933,7 @@ static void fixup_fan_min(struct device *dev, int fan, int old_div)
return;
new_min = data->fan_min[fan] * old_div / new_div;
- new_min = SENSORS_LIMIT(new_min, 1, 254);
+ new_min = clamp_val(new_min, 1, 254);
data->fan_min[fan] = new_min;
adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min);
}
@@ -1527,7 +1527,7 @@ static ssize_t set_auto_pwm_min(struct device *dev,
return err;
mutex_lock(&data->update_lock);
- data->pwm1.auto_pwm_min = SENSORS_LIMIT(val, 0, 255);
+ data->pwm1.auto_pwm_min = clamp_val(val, 0, 255);
if (data->pwm1.enable == 2) { /* apply immediately */
data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
OpenPOWER on IntegriCloud