diff options
Diffstat (limited to 'drivers/hwmon/abituguru.c')
| -rw-r--r-- | drivers/hwmon/abituguru.c | 584 |
1 files changed, 360 insertions, 224 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 3b728e8..a72bf25 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1,25 +1,25 @@ /* - abituguru.c Copyright (c) 2005-2006 Hans de Goede <hdegoede@redhat.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * abituguru.c Copyright (c) 2005-2006 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ /* - This driver supports the sensor part of the first and second revision of - the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because - of lack of specs the CPU/RAM voltage & frequency control is not supported! -*/ + * This driver supports the sensor part of the first and second revision of + * the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because + * of lack of specs the CPU/RAM voltage & frequency control is not supported! + */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -44,8 +44,10 @@ #define ABIT_UGURU_SENSOR_BANK2 0x26 /* fans */ /* max nr of sensors in bank1, a bank1 sensor can be in, temp or nc */ #define ABIT_UGURU_MAX_BANK1_SENSORS 16 -/* Warning if you increase one of the 2 MAX defines below to 10 or higher you - should adjust the belonging _NAMES_LENGTH macro for the 2 digit number! */ +/* + * Warning if you increase one of the 2 MAX defines below to 10 or higher you + * should adjust the belonging _NAMES_LENGTH macro for the 2 digit number! + */ /* max nr of sensors in bank2, currently mb's with max 6 fans are known */ #define ABIT_UGURU_MAX_BANK2_SENSORS 6 /* max nr of pwm outputs, currently mb's with max 5 pwm outputs are known */ @@ -70,16 +72,22 @@ #define ABIT_UGURU_IN_SENSOR 0 #define ABIT_UGURU_TEMP_SENSOR 1 #define ABIT_UGURU_NC 2 -/* In many cases we need to wait for the uGuru to reach a certain status, most - of the time it will reach this status within 30 - 90 ISA reads, and thus we - can best busy wait. This define gives the total amount of reads to try. */ +/* + * In many cases we need to wait for the uGuru to reach a certain status, most + * of the time it will reach this status within 30 - 90 ISA reads, and thus we + * can best busy wait. This define gives the total amount of reads to try. + */ #define ABIT_UGURU_WAIT_TIMEOUT 125 -/* However sometimes older versions of the uGuru seem to be distracted and they - do not respond for a long time. To handle this we sleep before each of the - last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. */ +/* + * However sometimes older versions of the uGuru seem to be distracted and they + * do not respond for a long time. To handle this we sleep before each of the + * last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. + */ #define ABIT_UGURU_WAIT_TIMEOUT_SLEEP 5 -/* Normally all expected status in abituguru_ready, are reported after the - first read, but sometimes not and we need to poll. */ +/* + * Normally all expected status in abituguru_ready, are reported after the + * first read, but sometimes not and we need to poll. + */ #define ABIT_UGURU_READY_TIMEOUT 5 /* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */ #define ABIT_UGURU_MAX_RETRIES 3 @@ -92,17 +100,25 @@ if (level <= verbose) \ printk(KERN_DEBUG ABIT_UGURU_NAME ": " format , ## arg) /* Macros to help calculate the sysfs_names array length */ -/* sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0, - in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0 */ +/* + * sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0, + * in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0 + */ #define ABITUGURU_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14) -/* sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0, - temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0 */ +/* + * sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0, + * temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0 + */ #define ABITUGURU_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16) -/* sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0, - fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0 */ +/* + * sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0, + * fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0 + */ #define ABITUGURU_FAN_NAMES_LENGTH (11 + 9 + 11 + 18 + 10 + 14) -/* sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0, - pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0 */ +/* + * sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0, + * pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0 + */ #define ABITUGURU_PWM_NAMES_LENGTH (12 + 24 + 2 * 21 + 2 * 22) /* IN_NAMES_LENGTH > TEMP_NAMES_LENGTH so assume all bank1 sensors are in */ #define ABITUGURU_SYSFS_NAMES_LENGTH ( \ @@ -110,10 +126,12 @@ ABIT_UGURU_MAX_BANK2_SENSORS * ABITUGURU_FAN_NAMES_LENGTH + \ ABIT_UGURU_MAX_PWMS * ABITUGURU_PWM_NAMES_LENGTH) -/* All the macros below are named identical to the oguru and oguru2 programs - reverse engineered by Olle Sandberg, hence the names might not be 100% - logical. I could come up with better names, but I prefer keeping the names - identical so that this driver can be compared with his work more easily. */ +/* + * All the macros below are named identical to the oguru and oguru2 programs + * reverse engineered by Olle Sandberg, hence the names might not be 100% + * logical. I could come up with better names, but I prefer keeping the names + * identical so that this driver can be compared with his work more easily. + */ /* Two i/o-ports are used by uGuru */ #define ABIT_UGURU_BASE 0x00E0 /* Used to tell uGuru what to read and to read the actual data */ @@ -130,16 +148,22 @@ /* Constants */ /* in (Volt) sensors go up to 3494 mV, temp to 255000 millidegrees Celsius */ static const int abituguru_bank1_max_value[2] = { 3494, 255000 }; -/* Min / Max allowed values for sensor2 (fan) alarm threshold, these values - correspond to 300-3000 RPM */ +/* + * Min / Max allowed values for sensor2 (fan) alarm threshold, these values + * correspond to 300-3000 RPM + */ static const u8 abituguru_bank2_min_threshold = 5; static const u8 abituguru_bank2_max_threshold = 50; -/* Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4 - are temperature trip points. */ +/* + * Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4 + * are temperature trip points. + */ static const int abituguru_pwm_settings_multiplier[5] = { 0, 1, 1, 1000, 1000 }; -/* Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a - special case the minium allowed pwm% setting for this is 30% (77) on - some MB's this special case is handled in the code! */ +/* + * Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a + * special case the minium allowed pwm% setting for this is 30% (77) on + * some MB's this special case is handled in the code! + */ static const u8 abituguru_pwm_min[5] = { 0, 170, 170, 25, 25 }; static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 }; @@ -175,23 +199,29 @@ MODULE_PARM_DESC(verbose, "How verbose should the driver be? (0-3):\n" " 3 + retryable error reporting"); -/* For the Abit uGuru, we need to keep some data in memory. - The structure is dynamically allocated, at the same time when a new - abituguru device is allocated. */ +/* + * For the Abit uGuru, we need to keep some data in memory. + * The structure is dynamically allocated, at the same time when a new + * abituguru device is allocated. + */ struct abituguru_data { struct device *hwmon_dev; /* hwmon registered device */ struct mutex update_lock; /* protect access to data and uGuru */ unsigned long last_updated; /* In jiffies */ unsigned short addr; /* uguru base address */ char uguru_ready; /* is the uguru in ready state? */ - unsigned char update_timeouts; /* number of update timeouts since last - successful update */ - - /* The sysfs attr and their names are generated automatically, for bank1 - we cannot use a predefined array because we don't know beforehand - of a sensor is a volt or a temp sensor, for bank2 and the pwms its - easier todo things the same way. For in sensors we have 9 (temp 7) - sysfs entries per sensor, for bank2 and pwms 6. */ + unsigned char update_timeouts; /* + * number of update timeouts since last + * successful update + */ + + /* + * The sysfs attr and their names are generated automatically, for bank1 + * we cannot use a predefined array because we don't know beforehand + * of a sensor is a volt or a temp sensor, for bank2 and the pwms its + * easier todo things the same way. For in sensors we have 9 (temp 7) + * sysfs entries per sensor, for bank2 and pwms 6. + */ struct sensor_device_attribute_2 sysfs_attr[ ABIT_UGURU_MAX_BANK1_SENSORS * 9 + ABIT_UGURU_MAX_BANK2_SENSORS * 6 + ABIT_UGURU_MAX_PWMS * 6]; @@ -203,11 +233,15 @@ struct abituguru_data { u8 bank1_sensors[2]; u8 bank1_address[2][ABIT_UGURU_MAX_BANK1_SENSORS]; u8 bank1_value[ABIT_UGURU_MAX_BANK1_SENSORS]; - /* This array holds 3 entries per sensor for the bank 1 sensor settings - (flags, min, max for voltage / flags, warn, shutdown for temp). */ + /* + * This array holds 3 entries per sensor for the bank 1 sensor settings + * (flags, min, max for voltage / flags, warn, shutdown for temp). + */ u8 bank1_settings[ABIT_UGURU_MAX_BANK1_SENSORS][3]; - /* Maximum value for each sensor used for scaling in mV/millidegrees - Celsius. */ + /* + * Maximum value for each sensor used for scaling in mV/millidegrees + * Celsius. + */ int bank1_max_value[ABIT_UGURU_MAX_BANK1_SENSORS]; /* Bank 2 data, ABIT_UGURU_MAX_BANK2_SENSORS entries for bank2 */ @@ -236,8 +270,10 @@ static int abituguru_wait(struct abituguru_data *data, u8 state) timeout--; if (timeout == 0) return -EBUSY; - /* sleep a bit before our last few tries, see the comment on - this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. */ + /* + * sleep a bit before our last few tries, see the comment on + * this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. + */ if (timeout <= ABIT_UGURU_WAIT_TIMEOUT_SLEEP) msleep(0); } @@ -273,8 +309,10 @@ static int abituguru_ready(struct abituguru_data *data) msleep(0); } - /* After this the ABIT_UGURU_DATA port should contain - ABIT_UGURU_STATUS_INPUT */ + /* + * After this the ABIT_UGURU_DATA port should contain + * ABIT_UGURU_STATUS_INPUT + */ timeout = ABIT_UGURU_READY_TIMEOUT; while (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) { timeout--; @@ -290,27 +328,35 @@ static int abituguru_ready(struct abituguru_data *data) return 0; } -/* Send the bank and then sensor address to the uGuru for the next read/write - cycle. This function gets called as the first part of a read/write by - abituguru_read and abituguru_write. This function should never be - called by any other function. */ +/* + * Send the bank and then sensor address to the uGuru for the next read/write + * cycle. This function gets called as the first part of a read/write by + * abituguru_read and abituguru_write. This function should never be + * called by any other function. + */ static int abituguru_send_address(struct abituguru_data *data, u8 bank_addr, u8 sensor_addr, int retries) { - /* assume the caller does error handling itself if it has not requested - any retries, and thus be quiet. */ + /* + * assume the caller does error handling itself if it has not requested + * any retries, and thus be quiet. + */ int report_errors = retries; for (;;) { - /* Make sure the uguru is ready and then send the bank address, - after this the uguru is no longer "ready". */ + /* + * Make sure the uguru is ready and then send the bank address, + * after this the uguru is no longer "ready". + */ if (abituguru_ready(data) != 0) return -EIO; outb(bank_addr, data->addr + ABIT_UGURU_DATA); data->uguru_ready = 0; - /* Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again - and send the sensor addr */ + /* + * Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again + * and send the sensor addr + */ if (abituguru_wait(data, ABIT_UGURU_STATUS_INPUT)) { if (retries) { ABIT_UGURU_DEBUG(3, "timeout exceeded " @@ -332,8 +378,10 @@ static int abituguru_send_address(struct abituguru_data *data, } } -/* Read count bytes from sensor sensor_addr in bank bank_addr and store the - result in buf, retry the send address part of the read retries times. */ +/* + * Read count bytes from sensor sensor_addr in bank bank_addr and store the + * result in buf, retry the send address part of the read retries times. + */ static int abituguru_read(struct abituguru_data *data, u8 bank_addr, u8 sensor_addr, u8 *buf, int count, int retries) { @@ -362,13 +410,17 @@ static int abituguru_read(struct abituguru_data *data, return i; } -/* Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send - address part of the write is always retried ABIT_UGURU_MAX_RETRIES times. */ +/* + * Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send + * address part of the write is always retried ABIT_UGURU_MAX_RETRIES times. + */ static int abituguru_write(struct abituguru_data *data, u8 bank_addr, u8 sensor_addr, u8 *buf, int count) { - /* We use the ready timeout as we have to wait for 0xAC just like the - ready function */ + /* + * We use the ready timeout as we have to wait for 0xAC just like the + * ready function + */ int i, timeout = ABIT_UGURU_READY_TIMEOUT; /* Send the address */ @@ -388,9 +440,11 @@ static int abituguru_write(struct abituguru_data *data, outb(buf[i], data->addr + ABIT_UGURU_CMD); } - /* Now we need to wait till the chip is ready to be read again, - so that we can read 0xAC as confirmation that our write has - succeeded. */ + /* + * Now we need to wait till the chip is ready to be read again, + * so that we can read 0xAC as confirmation that our write has + * succeeded. + */ if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state " "after write (bank: %d, sensor: %d)\n", (int)bank_addr, @@ -416,12 +470,14 @@ static int abituguru_write(struct abituguru_data *data, return i; } -/* Detect sensor type. Temp and Volt sensors are enabled with - different masks and will ignore enable masks not meant for them. - This enables us to test what kind of sensor we're dealing with. - By setting the alarm thresholds so that we will always get an - alarm for sensor type X and then enabling the sensor as sensor type - X, if we then get an alarm it is a sensor of type X. */ +/* + * Detect sensor type. Temp and Volt sensors are enabled with + * different masks and will ignore enable masks not meant for them. + * This enables us to test what kind of sensor we're dealing with. + * By setting the alarm thresholds so that we will always get an + * alarm for sensor type X and then enabling the sensor as sensor type + * X, if we then get an alarm it is a sensor of type X. + */ static int __devinit abituguru_detect_bank1_sensor_type(struct abituguru_data *data, u8 sensor_addr) @@ -448,16 +504,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, pr_warn("bank1-sensor: %d reading (%d) too close to limits, " "unable to determine sensor type, skipping sensor\n", (int)sensor_addr, (int)val); - /* assume no sensor is there for sensors for which we can't - determine the sensor type because their reading is too close - to their limits, this usually means no sensor is there. */ + /* + * assume no sensor is there for sensors for which we can't + * determine the sensor type because their reading is too close + * to their limits, this usually means no sensor is there. + */ return ABIT_UGURU_NC; } ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr); - /* Volt sensor test, enable volt low alarm, set min value ridicously - high, or vica versa if the reading is very high. If its a volt - sensor this should always give us an alarm. */ + /* + * Volt sensor test, enable volt low alarm, set min value ridicously + * high, or vica versa if the reading is very high. If its a volt + * sensor this should always give us an alarm. + */ if (val <= 240u) { buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE; buf[1] = 245; @@ -473,8 +533,10 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, buf, 3) != 3) goto abituguru_detect_bank1_sensor_type_exit; - /* Now we need 20 ms to give the uguru time to read the sensors - and raise a voltage alarm */ + /* + * Now we need 20 ms to give the uguru time to read the sensors + * and raise a voltage alarm + */ set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(HZ/50); /* Check for alarm and check the alarm is a volt low alarm. */ @@ -497,17 +559,21 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor " "test\n"); - /* Temp sensor test, enable sensor as a temp sensor, set beep value - ridicously low (but not too low, otherwise uguru ignores it). - If its a temp sensor this should always give us an alarm. */ + /* + * Temp sensor test, enable sensor as a temp sensor, set beep value + * ridicously low (but not too low, otherwise uguru ignores it). + * If its a temp sensor this should always give us an alarm. + */ buf[0] = ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE; buf[1] = 5; buf[2] = 10; if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, buf, 3) != 3) goto abituguru_detect_bank1_sensor_type_exit; - /* Now we need 50 ms to give the uguru time to read the sensors - and raise a temp alarm */ + /* + * Now we need 50 ms to give the uguru time to read the sensors + * and raise a temp alarm + */ set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(HZ/20); /* Check for alarm and check the alarm is a temp high alarm. */ @@ -532,9 +598,11 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data, ret = ABIT_UGURU_NC; abituguru_detect_bank1_sensor_type_exit: - /* Restore original settings, failing here is really BAD, it has been - reported that some BIOS-es hang when entering the uGuru menu with - invalid settings present in the uGuru, so we try this 3 times. */ + /* + * Restore original settings, failing here is really BAD, it has been + * reported that some BIOS-es hang when entering the uGuru menu with + * invalid settings present in the uGuru, so we try this 3 times. + */ for (i = 0; i < 3; i++) if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, data->bank1_settings[sensor_addr], @@ -548,23 +616,25 @@ abituguru_detect_bank1_sensor_type_exit: return ret; } -/* These functions try to find out how many sensors there are in bank2 and how - many pwms there are. The purpose of this is to make sure that we don't give - the user the possibility to change settings for non-existent sensors / pwm. - The uGuru will happily read / write whatever memory happens to be after the - memory storing the PWM settings when reading/writing to a PWM which is not - there. Notice even if we detect a PWM which doesn't exist we normally won't - write to it, unless the user tries to change the settings. - - Although the uGuru allows reading (settings) from non existing bank2 - sensors, my version of the uGuru does seem to stop writing to them, the - write function above aborts in this case with: - "CMD reg does not hold 0xAC after write" - - Notice these 2 tests are non destructive iow read-only tests, otherwise - they would defeat their purpose. Although for the bank2_sensors detection a - read/write test would be feasible because of the reaction above, I've - however opted to stay on the safe side. */ +/* + * These functions try to find out how many sensors there are in bank2 and how + * many pwms there are. The purpose of this is to make sure that we don't give + * the user the possibility to change settings for non-existent sensors / pwm. + * The uGuru will happily read / write whatever memory happens to be after the + * memory storing the PWM settings when reading/writing to a PWM which is not + * there. Notice even if we detect a PWM which doesn't exist we normally won't + * write to it, unless the user tries to change the settings. + * + * Although the uGuru allows reading (settings) from non existing bank2 + * sensors, my version of the uGuru does seem to stop writing to them, the + * write function above aborts in this case with: + * "CMD reg does not hold 0xAC after write" + * + * Notice these 2 tests are non destructive iow read-only tests, otherwise + * they would defeat their purpose. Although for the bank2_sensors detection a + * read/write test would be feasible because of the reaction above, I've + * however opted to stay on the safe side. + */ static void __devinit abituguru_detect_no_bank2_sensors(struct abituguru_data *data) { @@ -580,12 +650,14 @@ abituguru_detect_no_bank2_sensors(struct abituguru_data *data) ABIT_UGURU_DEBUG(2, "detecting number of fan sensors\n"); for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { - /* 0x89 are the known used bits: - -0x80 enable shutdown - -0x08 enable beep - -0x01 enable alarm - All other bits should be 0, but on some motherboards - 0x40 (bit 6) is also high for some of the fans?? */ + /* + * 0x89 are the known used bits: + * -0x80 enable shutdown + * -0x08 enable beep + * -0x01 enable alarm + * All other bits should be 0, but on some motherboards + * 0x40 (bit 6) is also high for some of the fans?? + */ if (data->bank2_settings[i][0] & ~0xC9) { ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " "to be a fan sensor: settings[0] = %02X\n", @@ -633,9 +705,11 @@ abituguru_detect_no_pwms(struct abituguru_data *data) ABIT_UGURU_DEBUG(2, "detecting number of PWM outputs\n"); for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) { - /* 0x80 is the enable bit and the low - nibble is which temp sensor to use, - the other bits should be 0 */ + /* + * 0x80 is the enable bit and the low + * nibble is which temp sensor to use, + * the other bits should be 0 + */ if (data->pwm_settings[i][0] & ~0x8F) { ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " "to be a pwm channel: settings[0] = %02X\n", @@ -643,8 +717,10 @@ abituguru_detect_no_pwms(struct abituguru_data *data) break; } - /* the low nibble must correspond to one of the temp sensors - we've found */ + /* + * the low nibble must correspond to one of the temp sensors + * we've found + */ for (j = 0; j < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; j++) { if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][j] == @@ -711,9 +787,11 @@ abituguru_detect_no_pwms_exit: ABIT_UGURU_DEBUG(2, " found: %d PWM outputs\n", (int)data->pwms); } -/* Following are the sysfs callback functions. These functions expect: - sensor_device_attribute_2->index: sensor address/offset in the bank - sensor_device_attribute_2->nr: register offset, bitmask or NA. */ +/* + * Following are the sysfs callback functions. These functions expect: + * sensor_device_attribute_2->index: sensor address/offset in the bank + * sensor_device_attribute_2->nr: register offset, bitmask or NA. + */ static struct abituguru_data *abituguru_update_device(struct device *dev); static ssize_t show_bank1_value(struct device *dev, @@ -763,10 +841,18 @@ static ssize_t store_bank1_setting(struct device *dev, struct device_attribute { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - u8 val = (simple_strtoul(buf, NULL, 10) * 255 + - data->bank1_max_value[attr->index]/2) / + unsigned long val; + ssize_t ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + ret = count; + val = (val * 255 + data->bank1_max_value[attr->index] / 2) / data->bank1_max_value[attr->index]; - ssize_t ret = count; + if (val > 255) + return -EINVAL; mutex_lock(&data->update_lock); if (data->bank1_settings[attr->index][attr->nr] != val) { @@ -788,13 +874,19 @@ static ssize_t store_bank2_setting(struct device *dev, struct device_attribute { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - u8 val = (simple_strtoul(buf, NULL, 10)*255 + ABIT_UGURU_FAN_MAX/2) / - ABIT_UGURU_FAN_MAX; - ssize_t ret = count; + unsigned long val; + ssize_t ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + ret = count; + val = (val * 255 + ABIT_UGURU_FAN_MAX / 2) / ABIT_UGURU_FAN_MAX; /* this check can be done before taking the lock */ - if ((val < abituguru_bank2_min_threshold) || - (val > abituguru_bank2_max_threshold)) + if (val < abituguru_bank2_min_threshold || + val > abituguru_bank2_max_threshold) return -EINVAL; mutex_lock(&data->update_lock); @@ -819,11 +911,13 @@ static ssize_t show_bank1_alarm(struct device *dev, struct abituguru_data *data = abituguru_update_device(dev); if (!data) return -EIO; - /* See if the alarm bit for this sensor is set, and if the - alarm matches the type of alarm we're looking for (for volt - it can be either low or high). The type is stored in a few - readonly bits in the settings part of the relevant sensor. - The bitmask of the type is passed to us in attr->nr. */ + /* + * See if the alarm bit for this sensor is set, and if the + * alarm matches the type of alarm we're looking for (for volt + * it can be either low or high). The type is stored in a few + * readonly bits in the settings part of the relevant sensor. + * The bitmask of the type is passed to us in attr->nr. + */ if ((data->alarms[attr->index / 8] & (0x01 << (attr->index % 8))) && (data->bank1_settings[attr->index][0] & attr->nr)) return sprintf(buf, "1\n"); @@ -871,10 +965,15 @@ static ssize_t store_bank1_mask(struct device *dev, { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - int mask = simple_strtoul(buf, NULL, 10); - ssize_t ret = count; + ssize_t ret; u8 orig_val; + unsigned long mask; + + ret = kstrtoul(buf, 10, &mask); + if (ret) + return ret; + ret = count; mutex_lock(&data->update_lock); orig_val = data->bank1_settings[attr->index][0]; @@ -899,10 +998,15 @@ static ssize_t store_bank2_mask(struct device *dev, { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - int mask = simple_strtoul(buf, NULL, 10); - ssize_t ret = count; + ssize_t ret; u8 orig_val; + unsigned long mask; + ret = kstrtoul(buf, 10, &mask); + if (ret) + return ret; + + ret = count; mutex_lock(&data->update_lock); orig_val = data->bank2_settings[attr->index][0]; @@ -937,10 +1041,17 @@ static ssize_t store_pwm_setting(struct device *dev, struct device_attribute { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - u8 min, val = (simple_strtoul(buf, NULL, 10) + - abituguru_pwm_settings_multiplier[attr->nr]/2) / - abituguru_pwm_settings_multiplier[attr->nr]; - ssize_t ret = count; + u8 min; + unsigned long val; + ssize_t ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + ret = count; + val = (val + abituguru_pwm_settings_multiplier[attr->nr] / 2) / + abituguru_pwm_settings_multiplier[attr->nr]; /* special case pwm1 min pwm% */ if ((attr->index == 0) && ((attr->nr == 1) || (attr->nr == 2))) @@ -949,7 +1060,7 @@ static ssize_t store_pwm_setting(struct device *dev, struct device_attribute min = abituguru_pwm_min[attr->nr]; /* this check can be done before taking the lock */ - if ((val < min) || (val > abituguru_pwm_max[attr->nr])) + if (val < min || val > abituguru_pwm_max[attr->nr]) return -EINVAL; mutex_lock(&data->update_lock); @@ -981,8 +1092,10 @@ static ssize_t show_pwm_sensor(struct device *dev, struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); int i; - /* We need to walk to the temp sensor addresses to find what - the userspace id of the configured temp sensor is. */ + /* + * We need to walk to the temp sensor addresses to find what + * the userspace id of the configured temp sensor is. + */ for (i = 0; i < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; i++) if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][i] == (data->pwm_settings[attr->index][0] & 0x0F)) @@ -996,27 +1109,32 @@ static ssize_t store_pwm_sensor(struct device *dev, struct device_attribute { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - unsigned long val = simple_strtoul(buf, NULL, 10) - 1; - ssize_t ret = count; + ssize_t ret; + unsigned long val; + u8 orig_val; + u8 address; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + if (val == 0 || val > data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) + return -EINVAL; + + val -= 1; + ret = count; mutex_lock(&data->update_lock); - if (val < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) { - u8 orig_val = data->pwm_settings[attr->index][0]; - u8 address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val]; - data->pwm_settings[attr->index][0] &= 0xF0; - data->pwm_settings[attr->index][0] |= address; - if (data->pwm_settings[attr->index][0] != orig_val) { - if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, - attr->index, - data->pwm_settings[attr->index], - 5) < 1) { - data->pwm_settings[attr->index][0] = orig_val; - ret = -EIO; - } + orig_val = data->pwm_settings[attr->index][0]; + address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val]; + data->pwm_settings[attr->index][0] &= 0xF0; + data->pwm_settings[attr->index][0] |= address; + if (data->pwm_settings[attr->index][0] != orig_val) { + if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, attr->index, + data->pwm_settings[attr->index], 5) < 1) { + data->pwm_settings[attr->index][0] = orig_val; + ret = -EIO; } } - else - ret = -EINVAL; mutex_unlock(&data->update_lock); return ret; } @@ -1037,22 +1155,27 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute { struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); struct abituguru_data *data = dev_get_drvdata(dev); - u8 orig_val, user_val = simple_strtoul(buf, NULL, 10); - ssize_t ret = count; + u8 orig_val; + ssize_t ret; + unsigned long user_val; + + ret = kstrtoul(buf, 10, &user_val); + if (ret) + return ret; + ret = count; mutex_lock(&data->update_lock); orig_val = data->pwm_settings[attr->index][0]; switch (user_val) { - case 0: - data->pwm_settings[attr->index][0] &= - ~ABIT_UGURU_FAN_PWM_ENABLE; - break; - case 2: - data->pwm_settings[attr->index][0] |= - ABIT_UGURU_FAN_PWM_ENABLE; - break; - default: - ret = -EINVAL; + case 0: + data->pwm_settings[attr->index][0] &= + ~ABIT_UGURU_FAN_PWM_ENABLE; + break; + case 2: + data->pwm_settings[attr->index][0] |= ABIT_UGURU_FAN_PWM_ENABLE; + break; + default: + ret = -EINVAL; } if ((data->pwm_settings[attr->index][0] != orig_val) && (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, @@ -1147,13 +1270,16 @@ static int __devinit abituguru_probe(struct platform_device *pdev) int i, j, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV; char *sysfs_filename; - /* El weirdo probe order, to keep the sysfs order identical to the - BIOS and window-appliction listing order. */ + /* + * El weirdo probe order, to keep the sysfs order identical to the + * BIOS and window-appliction listing order. + */ const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = { 0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02, 0x09, 0x06, 0x05, 0x0B, 0x0F, 0x0D, 0x07, 0x0C }; - if (!(data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL))) + data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL); + if (!data) return -ENOMEM; data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; @@ -1164,9 +1290,11 @@ static int __devinit abituguru_probe(struct platform_device *pdev) if (inb_p(data->addr + ABIT_UGURU_DATA) == ABIT_UGURU_STATUS_INPUT) data->uguru_ready = 1; - /* Completely read the uGuru this has 2 purposes: - - testread / see if one really is there. - - make an in memory copy of all the uguru settings for future use. */ + /* + * Completely read the uGuru this has 2 purposes: + * - testread / see if one really is there. + * - make an in memory copy of all the uguru settings for future use. + */ if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, data->alarms, 3, ABIT_UGURU_MAX_RETRIES) != 3) goto abituguru_probe_error; @@ -1181,11 +1309,13 @@ static int __devinit abituguru_probe(struct platform_device *pdev) ABIT_UGURU_MAX_RETRIES) != 3) goto abituguru_probe_error; } - /* Note: We don't know how many bank2 sensors / pwms there really are, - but in order to "detect" this we need to read the maximum amount - anyways. If we read sensors/pwms not there we'll just read crap - this can't hurt. We need the detection because we don't want - unwanted writes, which will hurt! */ + /* + * Note: We don't know how many bank2 sensors / pwms there really are, + * but in order to "detect" this we need to read the maximum amount + * anyways. If we read sensors/pwms not there we'll just read crap + * this can't hurt. We need the detection because we don't want + * unwanted writes, which will hurt! + */ for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i, &data->bank2_value[i], 1, @@ -1332,24 +1462,26 @@ static struct abituguru_data *abituguru_update_device(struct device *dev) mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ)) { success = 0; - if ((err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, - data->alarms, 3, 0)) != 3) + err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, + data->alarms, 3, 0); + if (err != 3) goto LEAVE_UPDATE; for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { - if ((err = abituguru_read(data, - ABIT_UGURU_SENSOR_BANK1, i, - &data->bank1_value[i], 1, 0)) != 1) + err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, + i, &data->bank1_value[i], 1, 0); + if (err != 1) goto LEAVE_UPDATE; - if ((err = abituguru_read(data, - ABIT_UGURU_SENSOR_BANK1 + 1, i, - data->bank1_settings[i], 3, 0)) != 3) + err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, + i, data->bank1_settings[i], 3, 0); + if (err != 3) goto LEAVE_UPDATE; } - for (i = 0; i < data->bank2_sensors; i++) - if ((err = abituguru_read(data, - ABIT_UGURU_SENSOR_BANK2, i, - &data->bank2_value[i], 1, 0)) != 1) + for (i = 0; i < data->bank2_sensors; i++) { + err = abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i, + &data->bank2_value[i], 1, 0); + if (err != 1) goto LEAVE_UPDATE; + } /* success! */ success = 1; data->update_timeouts = 0; @@ -1385,8 +1517,10 @@ LEAVE_UPDATE: static int abituguru_suspend(struct platform_device *pdev, pm_message_t state) { struct abituguru_data *data = platform_get_drvdata(pdev); - /* make sure all communications with the uguru are done and no new - ones are started */ + /* + * make sure all communications with the uguru are done and no new + * ones are started + */ mutex_lock(&data->update_lock); return 0; } @@ -1418,12 +1552,14 @@ static struct platform_driver abituguru_driver = { static int __init abituguru_detect(void) { - /* See if there is an uguru there. After a reboot uGuru will hold 0x00 - at DATA and 0xAC, when this driver has already been loaded once - DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either - scenario but some will hold 0x00. - Some uGuru's initially hold 0x09 at DATA and will only hold 0x08 - after reading CMD first, so CMD must be read first! */ + /* + * See if there is an uguru there. After a reboot uGuru will hold 0x00 + * at DATA and 0xAC, when this driver has already been loaded once + * DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either + * scenario but some will hold 0x00. + * Some uGuru's initially hold 0x09 at DATA and will only hold 0x08 + * after reading CMD first, so CMD must be read first! + */ u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD); u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA); if (((data_val == 0x00) || (data_val == 0x08)) && |
