diff options
Diffstat (limited to 'drivers/gpu/drm/pl111/pl111_display.c')
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_display.c | 115 |
1 files changed, 104 insertions, 11 deletions
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index 06c4bf7..3106464 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -50,6 +50,41 @@ irqreturn_t pl111_irq(int irq, void *data) return status; } +static enum drm_mode_status +pl111_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + u32 cpp = priv->variant->fb_bpp / 8; + u64 bw; + + /* + * We use the pixelclock to also account for interlaced modes, the + * resulting bandwidth is in bytes per second. + */ + bw = mode->clock * 1000; /* In Hz */ + bw = bw * mode->hdisplay * mode->vdisplay * cpp; + bw = div_u64(bw, mode->htotal * mode->vtotal); + + /* + * If no bandwidth constraints, anything goes, else + * check if we are too fast. + */ + if (priv->memory_bw && (bw > priv->memory_bw)) { + DRM_DEBUG_KMS("%d x %d @ %d Hz, %d cpp, bw %llu too fast\n", + mode->hdisplay, mode->vdisplay, + mode->clock * 1000, cpp, bw); + + return MODE_BAD; + } + DRM_DEBUG_KMS("%d x %d @ %d Hz, %d cpp, bw %llu bytes/s OK\n", + mode->hdisplay, mode->vdisplay, + mode->clock * 1000, cpp, bw); + + return MODE_OK; +} + static int pl111_display_check(struct drm_simple_display_pipe *pipe, struct drm_plane_state *pstate, struct drm_crtc_state *cstate) @@ -94,6 +129,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, const struct drm_display_mode *mode = &cstate->mode; struct drm_framebuffer *fb = plane->state->fb; struct drm_connector *connector = priv->connector; + struct drm_bridge *bridge = priv->bridge; u32 cntl; u32 ppl, hsw, hfp, hbp; u32 lpp, vsw, vfp, vbp; @@ -137,17 +173,46 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, tim2 = readl(priv->regs + CLCD_TIM2); tim2 &= (TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK); + if (priv->variant->broken_clockdivider) + tim2 |= TIM2_BCD; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) tim2 |= TIM2_IHS; if (mode->flags & DRM_MODE_FLAG_NVSYNC) tim2 |= TIM2_IVS; - if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) - tim2 |= TIM2_IOE; + if (connector) { + if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) + tim2 |= TIM2_IOE; + + if (connector->display_info.bus_flags & + DRM_BUS_FLAG_PIXDATA_NEGEDGE) + tim2 |= TIM2_IPC; + } - if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) - tim2 |= TIM2_IPC; + if (bridge) { + const struct drm_bridge_timings *btimings = bridge->timings; + + /* + * Here is when things get really fun. Sometimes the bridge + * timings are such that the signal out from PL11x is not + * stable before the receiving bridge (such as a dumb VGA DAC + * or similar) samples it. If that happens, we compensate by + * the only method we have: output the data on the opposite + * edge of the clock so it is for sure stable when it gets + * sampled. + * + * The PL111 manual does not contain proper timining diagrams + * or data for these details, but we know from experiments + * that the setup time is more than 3000 picoseconds (3 ns). + * If we have a bridge that requires the signal to be stable + * earlier than 3000 ps before the clock pulse, we have to + * output the data on the opposite edge to avoid flicker. + */ + if (btimings && btimings->setup_time_ps >= 3000) + tim2 ^= TIM2_IPC; + } tim2 |= cpl << 16; writel(tim2, priv->regs + CLCD_TIM2); @@ -172,10 +237,17 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, cntl |= CNTL_LCDBPP24 | CNTL_BGR; break; case DRM_FORMAT_BGR565: - cntl |= CNTL_LCDBPP16_565; + if (priv->variant->is_pl110) + cntl |= CNTL_LCDBPP16; + else + cntl |= CNTL_LCDBPP16_565; break; case DRM_FORMAT_RGB565: - cntl |= CNTL_LCDBPP16_565 | CNTL_BGR; + if (priv->variant->is_pl110) + cntl |= CNTL_LCDBPP16; + else + cntl |= CNTL_LCDBPP16_565; + cntl |= CNTL_BGR; break; case DRM_FORMAT_ABGR1555: case DRM_FORMAT_XBGR1555: @@ -199,6 +271,10 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, break; } + /* The PL110 in Integrator/Versatile does the BGR routing externally */ + if (priv->variant->external_bgr) + cntl &= ~CNTL_BGR; + /* Power sequence: first enable and chill */ writel(cntl, priv->regs + priv->ctrl); @@ -215,7 +291,8 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, cntl |= CNTL_LCDPWR; writel(cntl, priv->regs + priv->ctrl); - drm_crtc_vblank_on(crtc); + if (!priv->variant->broken_vblank) + drm_crtc_vblank_on(crtc); } void pl111_display_disable(struct drm_simple_display_pipe *pipe) @@ -225,7 +302,8 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe) struct pl111_drm_dev_private *priv = drm->dev_private; u32 cntl; - drm_crtc_vblank_off(crtc); + if (!priv->variant->broken_vblank) + drm_crtc_vblank_off(crtc); /* Power Down */ cntl = readl(priv->regs + priv->ctrl); @@ -278,8 +356,10 @@ static void pl111_display_update(struct drm_simple_display_pipe *pipe, } } -int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) +static int pl111_display_enable_vblank(struct drm_simple_display_pipe *pipe) { + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; struct pl111_drm_dev_private *priv = drm->dev_private; writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb); @@ -287,8 +367,10 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) return 0; } -void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) +static void pl111_display_disable_vblank(struct drm_simple_display_pipe *pipe) { + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; struct pl111_drm_dev_private *priv = drm->dev_private; writel(0, priv->regs + priv->ienb); @@ -300,7 +382,8 @@ static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, return drm_gem_fb_prepare_fb(&pipe->plane, plane_state); } -static const struct drm_simple_display_pipe_funcs pl111_display_funcs = { +static struct drm_simple_display_pipe_funcs pl111_display_funcs = { + .mode_valid = pl111_mode_valid, .check = pl111_display_check, .enable = pl111_display_enable, .disable = pl111_display_disable, @@ -417,6 +500,11 @@ pl111_init_clock_divider(struct drm_device *drm) dev_err(drm->dev, "CLCD: unable to get clcdclk.\n"); return PTR_ERR(parent); } + /* If the clock divider is broken, use the parent directly */ + if (priv->variant->broken_clockdivider) { + priv->clk = parent; + return 0; + } parent_name = __clk_get_name(parent); spin_lock_init(&priv->tim2_lock); @@ -454,6 +542,11 @@ int pl111_display_init(struct drm_device *drm) if (ret) return ret; + if (!priv->variant->broken_vblank) { + pl111_display_funcs.enable_vblank = pl111_display_enable_vblank; + pl111_display_funcs.disable_vblank = pl111_display_disable_vblank; + } + ret = drm_simple_display_pipe_init(drm, &priv->pipe, &pl111_display_funcs, priv->variant->formats, |
