summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_pm.c')
-rw-r--r--drivers/gpu/drm/i915/intel_pm.c245
1 files changed, 177 insertions, 68 deletions
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index adca007..de3b0dc 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2460,10 +2460,14 @@ void gen6_set_rps(struct drm_device *dev, u8 val)
if (val == dev_priv->rps.cur_delay)
return;
- I915_WRITE(GEN6_RPNSWREQ,
- GEN6_FREQUENCY(val) |
- GEN6_OFFSET(0) |
- GEN6_AGGRESSIVE_TURBO);
+ if (IS_HASWELL(dev))
+ I915_WRITE(GEN6_RPNSWREQ,
+ HSW_FREQUENCY(val));
+ else
+ I915_WRITE(GEN6_RPNSWREQ,
+ GEN6_FREQUENCY(val) |
+ GEN6_OFFSET(0) |
+ GEN6_AGGRESSIVE_TURBO);
/* Make sure we continue to get interrupts
* until we hit the minimum or maximum frequencies.
@@ -2554,8 +2558,8 @@ static void gen6_enable_rps(struct drm_device *dev)
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
- /* In units of 100MHz */
- dev_priv->rps.max_delay = rp_state_cap & 0xff;
+ /* In units of 50MHz */
+ dev_priv->rps.hw_max = dev_priv->rps.max_delay = rp_state_cap & 0xff;
dev_priv->rps.min_delay = (rp_state_cap & 0xff0000) >> 16;
dev_priv->rps.cur_delay = 0;
@@ -2601,12 +2605,19 @@ static void gen6_enable_rps(struct drm_device *dev)
GEN6_RC_CTL_EI_MODE(1) |
GEN6_RC_CTL_HW_ENABLE);
- I915_WRITE(GEN6_RPNSWREQ,
- GEN6_FREQUENCY(10) |
- GEN6_OFFSET(0) |
- GEN6_AGGRESSIVE_TURBO);
- I915_WRITE(GEN6_RC_VIDEO_FREQ,
- GEN6_FREQUENCY(12));
+ if (IS_HASWELL(dev)) {
+ I915_WRITE(GEN6_RPNSWREQ,
+ HSW_FREQUENCY(10));
+ I915_WRITE(GEN6_RC_VIDEO_FREQ,
+ HSW_FREQUENCY(12));
+ } else {
+ I915_WRITE(GEN6_RPNSWREQ,
+ GEN6_FREQUENCY(10) |
+ GEN6_OFFSET(0) |
+ GEN6_AGGRESSIVE_TURBO);
+ I915_WRITE(GEN6_RC_VIDEO_FREQ,
+ GEN6_FREQUENCY(12));
+ }
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
@@ -2631,9 +2642,11 @@ static void gen6_enable_rps(struct drm_device *dev)
if (!ret) {
pcu_mbox = 0;
ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox);
- if (ret && pcu_mbox & (1<<31)) { /* OC supported */
- dev_priv->rps.max_delay = pcu_mbox & 0xff;
- DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
+ if (!ret && (pcu_mbox & (1<<31))) { /* OC supported */
+ DRM_DEBUG_DRIVER("Overclocking supported. Max: %dMHz, Overclock max: %dMHz\n",
+ (dev_priv->rps.max_delay & 0xff) * 50,
+ (pcu_mbox & 0xff) * 50);
+ dev_priv->rps.hw_max = pcu_mbox & 0xff;
}
} else {
DRM_DEBUG_DRIVER("Failed to set the min frequency\n");
@@ -2671,8 +2684,8 @@ static void gen6_update_ring_freq(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int min_freq = 15;
- int gpu_freq;
- unsigned int ia_freq, max_ia_freq;
+ unsigned int gpu_freq;
+ unsigned int max_ia_freq, min_ring_freq;
int scaling_factor = 180;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
@@ -2688,6 +2701,10 @@ static void gen6_update_ring_freq(struct drm_device *dev)
/* Convert from kHz to MHz */
max_ia_freq /= 1000;
+ min_ring_freq = I915_READ(MCHBAR_MIRROR_BASE_SNB + DCLK);
+ /* convert DDR frequency from units of 133.3MHz to bandwidth */
+ min_ring_freq = (2 * 4 * min_ring_freq + 2) / 3;
+
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
@@ -2696,21 +2713,32 @@ static void gen6_update_ring_freq(struct drm_device *dev)
for (gpu_freq = dev_priv->rps.max_delay; gpu_freq >= dev_priv->rps.min_delay;
gpu_freq--) {
int diff = dev_priv->rps.max_delay - gpu_freq;
-
- /*
- * For GPU frequencies less than 750MHz, just use the lowest
- * ring freq.
- */
- if (gpu_freq < min_freq)
- ia_freq = 800;
- else
- ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
- ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
- ia_freq <<= GEN6_PCODE_FREQ_IA_RATIO_SHIFT;
+ unsigned int ia_freq = 0, ring_freq = 0;
+
+ if (IS_HASWELL(dev)) {
+ ring_freq = (gpu_freq * 5 + 3) / 4;
+ ring_freq = max(min_ring_freq, ring_freq);
+ /* leave ia_freq as the default, chosen by cpufreq */
+ } else {
+ /* On older processors, there is no separate ring
+ * clock domain, so in order to boost the bandwidth
+ * of the ring, we need to upclock the CPU (ia_freq).
+ *
+ * For GPU frequencies less than 750MHz,
+ * just use the lowest ring freq.
+ */
+ if (gpu_freq < min_freq)
+ ia_freq = 800;
+ else
+ ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+ ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
+ }
sandybridge_pcode_write(dev_priv,
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
- ia_freq | gpu_freq);
+ ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
+ ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
+ gpu_freq);
}
}
@@ -2821,7 +2849,7 @@ static void ironlake_enable_rc6(struct drm_device *dev)
ret = intel_ring_idle(ring);
dev_priv->mm.interruptible = was_interruptible;
if (ret) {
- DRM_ERROR("failed to enable ironlake power power savings\n");
+ DRM_ERROR("failed to enable ironlake power savings\n");
ironlake_teardown_rc6(dev);
return;
}
@@ -3562,6 +3590,7 @@ static void cpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
+ uint32_t val;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
@@ -3574,8 +3603,17 @@ static void cpt_init_clock_gating(struct drm_device *dev)
/* The below fixes the weird display corruption, a few pixels shifted
* downward, on (only) LVDS of some HP laptops with IVY.
*/
- for_each_pipe(pipe)
- I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_CHICKEN2_TIMING_OVERRIDE);
+ for_each_pipe(pipe) {
+ val = I915_READ(TRANS_CHICKEN2(pipe));
+ val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
+ val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+ if (dev_priv->fdi_rx_polarity_inverted)
+ val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+ val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
+ val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
+ val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
+ I915_WRITE(TRANS_CHICKEN2(pipe), val);
+ }
/* WADP0ClockGatingDisable */
for_each_pipe(pipe) {
I915_WRITE(TRANS_CHICKEN1(pipe),
@@ -3768,6 +3806,9 @@ static void haswell_init_clock_gating(struct drm_device *dev)
I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
GEN6_MBCTL_ENABLE_BOOT_FETCH);
+ /* WaSwitchSolVfFArbitrationPriority */
+ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
+
/* XXX: This is a workaround for early silicon revisions and should be
* removed later.
*/
@@ -3874,7 +3915,8 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
snpcr |= GEN6_MBC_SNPCR_MED;
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
- cpt_init_clock_gating(dev);
+ if (!HAS_PCH_NOP(dev))
+ cpt_init_clock_gating(dev);
gen6_check_mch_setup(dev);
}
@@ -3899,8 +3941,10 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
+ /* WaDisablePSDDualDispatchEnable */
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
- _MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
+ _MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
+ GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
@@ -3968,24 +4012,20 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
- * On ValleyView, the GUnit needs to signal the GT
- * when flip and other events complete. So enable
- * all the GUnit->GT interrupts here
- */
- I915_WRITE(VLV_DPFLIPSTAT, PIPEB_LINE_COMPARE_INT_EN |
- PIPEB_HLINE_INT_EN | PIPEB_VBLANK_INT_EN |
- SPRITED_FLIPDONE_INT_EN | SPRITEC_FLIPDONE_INT_EN |
- PLANEB_FLIPDONE_INT_EN | PIPEA_LINE_COMPARE_INT_EN |
- PIPEA_HLINE_INT_EN | PIPEA_VBLANK_INT_EN |
- SPRITEB_FLIPDONE_INT_EN | SPRITEA_FLIPDONE_INT_EN |
- PLANEA_FLIPDONE_INT_EN);
-
- /*
* WaDisableVLVClockGating_VBIIssue
* Disable clock gating on th GCFG unit to prevent a delay
* in the reporting of vblank events.
*/
- I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS);
+ I915_WRITE(VLV_GUNIT_CLOCK_GATE, 0xffffffff);
+
+ /* Conservative clock gating settings for now */
+ I915_WRITE(0x9400, 0xffffffff);
+ I915_WRITE(0x9404, 0xffffffff);
+ I915_WRITE(0x9408, 0xffffffff);
+ I915_WRITE(0x940c, 0xffffffff);
+ I915_WRITE(0x9410, 0xffffffff);
+ I915_WRITE(0x9414, 0xffffffff);
+ I915_WRITE(0x9418, 0xffffffff);
}
static void g4x_init_clock_gating(struct drm_device *dev)
@@ -4070,13 +4110,29 @@ void intel_init_clock_gating(struct drm_device *dev)
dev_priv->display.init_clock_gating(dev);
}
+/**
+ * We should only use the power well if we explicitly asked the hardware to
+ * enable it, so check if it's enabled and also check if we've requested it to
+ * be enabled.
+ */
+bool intel_using_power_well(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_HASWELL(dev))
+ return I915_READ(HSW_PWR_WELL_DRIVER) ==
+ (HSW_PWR_WELL_ENABLE | HSW_PWR_WELL_STATE);
+ else
+ return true;
+}
+
void intel_set_power_well(struct drm_device *dev, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
bool is_enabled, enable_requested;
uint32_t tmp;
- if (!IS_HASWELL(dev))
+ if (!HAS_POWER_WELL(dev))
return;
if (!i915_disable_power_well && !enable)
@@ -4114,7 +4170,7 @@ void intel_init_power_well(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (!IS_HASWELL(dev))
+ if (!HAS_POWER_WELL(dev))
return;
/* For now, we need the power well to be always enabled. */
@@ -4176,7 +4232,6 @@ void intel_init_pm(struct drm_device *dev)
}
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
} else if (IS_IVYBRIDGE(dev)) {
- /* FIXME: detect B0+ stepping and use auto training */
if (SNB_READ_WM0_LATENCY()) {
dev_priv->display.update_wm = ivybridge_update_wm;
dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
@@ -4274,21 +4329,14 @@ static void __gen6_gt_force_wake_reset(struct drm_i915_private *dev_priv)
static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
- u32 forcewake_ack;
-
- if (IS_HASWELL(dev_priv->dev))
- forcewake_ack = FORCEWAKE_ACK_HSW;
- else
- forcewake_ack = FORCEWAKE_ACK;
-
- if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+ if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0,
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
- I915_WRITE_NOTRACE(FORCEWAKE, FORCEWAKE_KERNEL);
+ I915_WRITE_NOTRACE(FORCEWAKE, 1);
POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
- if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
+ if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK) & 1),
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("Timed out waiting for forcewake to ack request.\n");
@@ -4311,7 +4359,7 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
else
forcewake_ack = FORCEWAKE_MT_ACK;
- if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+ if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & FORCEWAKE_KERNEL) == 0,
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
@@ -4319,7 +4367,7 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
/* something from same cacheline, but !FORCEWAKE_MT */
POSTING_READ(ECOBUS);
- if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
+ if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & FORCEWAKE_KERNEL),
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("Timed out waiting for forcewake to ack request.\n");
@@ -4409,15 +4457,22 @@ static void vlv_force_wake_reset(struct drm_i915_private *dev_priv)
static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
{
- if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0,
+ if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & FORCEWAKE_KERNEL) == 0,
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n");
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
+ I915_WRITE_NOTRACE(FORCEWAKE_MEDIA_VLV,
+ _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
- if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
+ if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & FORCEWAKE_KERNEL),
FORCEWAKE_ACK_TIMEOUT_MS))
- DRM_ERROR("Timed out waiting for forcewake to ack request.\n");
+ DRM_ERROR("Timed out waiting for GT to ack forcewake request.\n");
+
+ if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_MEDIA_VLV) &
+ FORCEWAKE_KERNEL),
+ FORCEWAKE_ACK_TIMEOUT_MS))
+ DRM_ERROR("Timed out waiting for media to ack forcewake request.\n");
__gen6_gt_wait_for_thread_c0(dev_priv);
}
@@ -4425,8 +4480,9 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
static void vlv_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
- /* something from same cacheline, but !FORCEWAKE_VLV */
- POSTING_READ(FORCEWAKE_ACK_VLV);
+ I915_WRITE_NOTRACE(FORCEWAKE_MEDIA_VLV,
+ _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL));
+ /* The below doubles as a POSTING_READ */
gen6_gt_check_fifodbg(dev_priv);
}
@@ -4511,3 +4567,56 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
return 0;
}
+
+static int vlv_punit_rw(struct drm_i915_private *dev_priv, u8 opcode,
+ u8 addr, u32 *val)
+{
+ u32 cmd, devfn, port, be, bar;
+
+ bar = 0;
+ be = 0xf;
+ port = IOSF_PORT_PUNIT;
+ devfn = PCI_DEVFN(2, 0);
+
+ cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
+ (port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
+ (bar << IOSF_BAR_SHIFT);
+
+ WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+ if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
+ DRM_DEBUG_DRIVER("warning: pcode (%s) mailbox access failed\n",
+ opcode == PUNIT_OPCODE_REG_READ ?
+ "read" : "write");
+ return -EAGAIN;
+ }
+
+ I915_WRITE(VLV_IOSF_ADDR, addr);
+ if (opcode == PUNIT_OPCODE_REG_WRITE)
+ I915_WRITE(VLV_IOSF_DATA, *val);
+ I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
+
+ if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
+ 500)) {
+ DRM_ERROR("timeout waiting for pcode %s (%d) to finish\n",
+ opcode == PUNIT_OPCODE_REG_READ ? "read" : "write",
+ addr);
+ return -ETIMEDOUT;
+ }
+
+ if (opcode == PUNIT_OPCODE_REG_READ)
+ *val = I915_READ(VLV_IOSF_DATA);
+ I915_WRITE(VLV_IOSF_DATA, 0);
+
+ return 0;
+}
+
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
+{
+ return vlv_punit_rw(dev_priv, PUNIT_OPCODE_REG_READ, addr, val);
+}
+
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
+{
+ return vlv_punit_rw(dev_priv, PUNIT_OPCODE_REG_WRITE, addr, &val);
+}
OpenPOWER on IntegriCloud