diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 285 |
1 files changed, 264 insertions, 21 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 345e505..f416ead 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -39,6 +39,21 @@ #define I915_LVDS "i915_lvds" +/* + * the following four scaling options are defined. + * #define DRM_MODE_SCALE_NON_GPU 0 + * #define DRM_MODE_SCALE_FULLSCREEN 1 + * #define DRM_MODE_SCALE_NO_SCALE 2 + * #define DRM_MODE_SCALE_ASPECT 3 + */ + +/* Private structure for the integrated LVDS support */ +struct intel_lvds_priv { + int fitting_mode; + u32 pfit_control; + u32 pfit_pgm_ratios; +}; + /** * Sets the backlight level. * @@ -213,10 +228,24 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + /* + * float point operation is not supported . So the PANEL_RATIO_FACTOR + * is defined, which can avoid the float point computation when + * calculating the panel ratio. + */ +#define PANEL_RATIO_FACTOR 8192 struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + u32 pfit_control = 0, pfit_pgm_ratios = 0; + int left_border = 0, right_border = 0, top_border = 0; + int bottom_border = 0; + bool border = 0; + int panel_ratio, desired_ratio, vert_scale, horiz_scale; + int horiz_ratio, vert_ratio; /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { @@ -232,7 +261,9 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, return false; } } - + /* If we don't have a panel mode, there is nothing we can do */ + if (dev_priv->panel_fixed_mode == NULL) + return true; /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, @@ -256,6 +287,191 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } + /* Make sure pre-965s set dither correctly */ + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + + /* Native modes don't need fitting */ + if (adjusted_mode->hdisplay == mode->hdisplay && + adjusted_mode->vdisplay == mode->vdisplay) { + pfit_pgm_ratios = 0; + border = 0; + goto out; + } + + /* 965+ wants fuzzy fitting */ + if (IS_I965G(dev)) + pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | + PFIT_FILTER_FUZZY; + + /* + * Deal with panel fitting options. Figure out how to stretch the + * image based on its aspect ratio & the current panel fitting mode. + */ + panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / + adjusted_mode->vdisplay; + desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / + mode->vdisplay; + /* + * Enable automatic panel scaling for non-native modes so that they fill + * the screen. Should be enabled before the pipe is enabled, according + * to register description and PRM. + * Change the value here to see the borders for debugging + */ + I915_WRITE(BCLRPAT_A, 0); + I915_WRITE(BCLRPAT_B, 0); + + switch (lvds_priv->fitting_mode) { + case DRM_MODE_SCALE_NO_SCALE: + /* + * For centered modes, we have to calculate border widths & + * heights and modify the values programmed into the CRTC. + */ + left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; + right_border = left_border; + if (mode->hdisplay & 1) + right_border++; + top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + /* Set active & border values */ + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_hblank_start = mode->hdisplay + + right_border - 1; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal - + left_border - 1; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hblank_end; + adjusted_mode->crtc_vdisplay = mode->vdisplay; + adjusted_mode->crtc_vblank_start = mode->vdisplay + + bottom_border - 1; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal - + top_border - 1; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_end; + border = 1; + break; + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the spect ratio */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) { + /* 965+ is easy, it does everything in hw */ + if (panel_ratio > desired_ratio) + pfit_control |= PFIT_SCALING_PILLAR; + else if (panel_ratio < desired_ratio) + pfit_control |= PFIT_SCALING_LETTER; + else + pfit_control |= PFIT_SCALING_AUTO; + } else { + /* + * For earlier chips we have to calculate the scaling + * ratio by hand and program it into the + * PFIT_PGM_RATIO register + */ + u32 horiz_bits, vert_bits, bits = 12; + horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->hdisplay; + vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ + adjusted_mode->vdisplay; + horiz_scale = adjusted_mode->hdisplay * + PANEL_RATIO_FACTOR / mode->hdisplay; + vert_scale = adjusted_mode->vdisplay * + PANEL_RATIO_FACTOR / mode->vdisplay; + + /* retain aspect ratio */ + if (panel_ratio > desired_ratio) { /* Pillar */ + u32 scaled_width; + scaled_width = mode->hdisplay * vert_scale / + PANEL_RATIO_FACTOR; + horiz_ratio = vert_ratio; + pfit_control |= (VERT_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Pillar will have left/right borders */ + left_border = (adjusted_mode->hdisplay - + scaled_width) / 2; + right_border = left_border; + if (mode->hdisplay & 1) /* odd resolutions */ + right_border++; + adjusted_mode->crtc_hdisplay = scaled_width; + adjusted_mode->crtc_hblank_start = + scaled_width + right_border - 1; + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_htotal - left_border - 1; + adjusted_mode->crtc_hsync_start = + adjusted_mode->crtc_hblank_start; + adjusted_mode->crtc_hsync_end = + adjusted_mode->crtc_hblank_end; + border = 1; + } else if (panel_ratio < desired_ratio) { /* letter */ + u32 scaled_height = mode->vdisplay * + horiz_scale / PANEL_RATIO_FACTOR; + vert_ratio = horiz_ratio; + pfit_control |= (HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + /* Letterbox will have top/bottom border */ + top_border = (adjusted_mode->vdisplay - + scaled_height) / 2; + bottom_border = top_border; + if (mode->vdisplay & 1) + bottom_border++; + adjusted_mode->crtc_vdisplay = scaled_height; + adjusted_mode->crtc_vblank_start = + scaled_height + bottom_border - 1; + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vtotal - top_border - 1; + adjusted_mode->crtc_vsync_start = + adjusted_mode->crtc_vblank_start; + adjusted_mode->crtc_vsync_end = + adjusted_mode->crtc_vblank_end; + border = 1; + } else { + /* Aspects match, Let hw scale both directions */ + pfit_control |= (VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + horiz_bits = (1 << bits) * horiz_ratio / + PANEL_RATIO_FACTOR; + vert_bits = (1 << bits) * vert_ratio / + PANEL_RATIO_FACTOR; + pfit_pgm_ratios = + ((vert_bits << PFIT_VERT_SCALE_SHIFT) & + PFIT_VERT_SCALE_MASK) | + ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & + PFIT_HORIZ_SCALE_MASK); + } + break; + + case DRM_MODE_SCALE_FULLSCREEN: + /* + * Full scaling, even if it changes the aspect ratio. + * Fortunately this is all done for us in hw. + */ + pfit_control |= PFIT_ENABLE; + if (IS_I965G(dev)) + pfit_control |= PFIT_SCALING_AUTO; + else + pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + break; + default: + break; + } + +out: + lvds_priv->pfit_control = pfit_control; + lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the @@ -301,8 +517,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); - u32 pfit_control; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; /* * The LVDS pin pair will already have been turned on in the @@ -319,22 +535,8 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ - if (mode->hdisplay != adjusted_mode->hdisplay || - mode->vdisplay != adjusted_mode->vdisplay) - pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | - HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | - HORIZ_INTERP_BILINEAR); - else - pfit_control = 0; - - if (!IS_I965G(dev)) { - if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) - pfit_control |= PANEL_8TO6_DITHER_ENABLE; - } - else - pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; - - I915_WRITE(PFIT_CONTROL, pfit_control); + I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); } /** @@ -406,6 +608,34 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = + to_intel_output(connector); + + if (property == dev->mode_config.scaling_mode_property && + connector->encoder) { + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; + if (value == DRM_MODE_SCALE_NON_GPU) { + DRM_DEBUG_KMS(I915_LVDS, + "non_GPU property is unsupported\n"); + return 0; + } + if (lvds_priv->fitting_mode == value) { + /* the LVDS scaling property is not changed */ + return 0; + } + lvds_priv->fitting_mode = value; + if (crtc && crtc->enabled) { + /* + * If the CRTC is enabled, the display will be changed + * according to the new panel fitting mode. + */ + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); + } + } + return 0; } @@ -518,6 +748,7 @@ void intel_lvds_init(struct drm_device *dev) struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; + struct intel_lvds_priv *lvds_priv; u32 lvds; int pipe, gpio = GPIOC; @@ -531,7 +762,8 @@ void intel_lvds_init(struct drm_device *dev) gpio = PCH_GPIOC; } - intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + intel_output = kzalloc(sizeof(struct intel_output) + + sizeof(struct intel_lvds_priv), GFP_KERNEL); if (!intel_output) { return; } @@ -553,7 +785,18 @@ void intel_lvds_init(struct drm_device *dev) connector->interlace_allowed = false; connector->doublescan_allowed = false; + lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); + intel_output->dev_priv = lvds_priv; + /* create the scaling mode property */ + drm_mode_create_scaling_mode_property(dev); + /* + * the initial panel fitting mode will be FULL_SCREEN. + */ + drm_connector_attach_property(&intel_output->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; /* * LVDS discovery: * 1) check for EDID on DDC @@ -649,5 +892,5 @@ failed: if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); drm_connector_cleanup(connector); - kfree(connector); + kfree(intel_output); } |
