summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r--drivers/gpu/drm/i915/intel_display.c267
1 files changed, 117 insertions, 150 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 11a3394..19daead 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -990,6 +990,22 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
struct drm_i915_private *dev_priv = dev->dev_private;
int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
+ /* Clear existing vblank status. Note this will clear any other
+ * sticky status fields as well.
+ *
+ * This races with i915_driver_irq_handler() with the result
+ * that either function could miss a vblank event. Here it is not
+ * fatal, as we will either wait upon the next vblank interrupt or
+ * timeout. Generally speaking intel_wait_for_vblank() is only
+ * called during modeset at which time the GPU should be idle and
+ * should *not* be performing page flips and thus not waiting on
+ * vblanks...
+ * Currently, the result of us stealing a vblank from the irq
+ * handler is that a single frame will be skipped during swapbuffers.
+ */
+ I915_WRITE(pipestat_reg,
+ I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
+
/* Wait for vblank interrupt bit to set */
if (wait_for((I915_READ(pipestat_reg) &
PIPE_VBLANK_INTERRUPT_STATUS),
@@ -1486,7 +1502,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
dspcntr &= ~DISPPLANE_TILED;
}
- if (IS_IRONLAKE(dev))
+ if (HAS_PCH_SPLIT(dev))
/* must disable */
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
@@ -1495,20 +1511,19 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
Start = obj_priv->gtt_offset;
Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8);
- DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+ Start, Offset, x, y, fb->pitch);
I915_WRITE(dspstride, fb->pitch);
if (IS_I965G(dev)) {
- I915_WRITE(dspbase, Offset);
- I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
- I915_READ(dspsurf);
I915_WRITE(dsptileoff, (y << 16) | x);
+ I915_WRITE(dspbase, Offset);
} else {
I915_WRITE(dspbase, Start + Offset);
- I915_READ(dspbase);
}
+ POSTING_READ(dspbase);
- if ((IS_I965G(dev) || plane == 0))
+ if (IS_I965G(dev) || plane == 0)
intel_update_fbc(crtc, &crtc->mode);
intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -1522,7 +1537,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_framebuffer *intel_fb;
@@ -1530,13 +1544,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_gem_object *obj;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
- unsigned long Start, Offset;
- int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
- int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
- int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
- u32 dspcntr;
int ret;
/* no fb bound */
@@ -1572,71 +1579,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return ret;
}
- dspcntr = I915_READ(dspcntr_reg);
- /* Mask out pixel format bits in case we change it */
- dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
- switch (crtc->fb->bits_per_pixel) {
- case 8:
- dspcntr |= DISPPLANE_8BPP;
- break;
- case 16:
- if (crtc->fb->depth == 15)
- dspcntr |= DISPPLANE_15_16BPP;
- else
- dspcntr |= DISPPLANE_16BPP;
- break;
- case 24:
- case 32:
- if (crtc->fb->depth == 30)
- dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
- else
- dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
- break;
- default:
- DRM_ERROR("Unknown color depth\n");
+ ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y);
+ if (ret) {
i915_gem_object_unpin(obj);
mutex_unlock(&dev->struct_mutex);
- return -EINVAL;
- }
- if (IS_I965G(dev)) {
- if (obj_priv->tiling_mode != I915_TILING_NONE)
- dspcntr |= DISPPLANE_TILED;
- else
- dspcntr &= ~DISPPLANE_TILED;
- }
-
- if (HAS_PCH_SPLIT(dev))
- /* must disable */
- dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
-
- I915_WRITE(dspcntr_reg, dspcntr);
-
- Start = obj_priv->gtt_offset;
- Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
-
- DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
- Start, Offset, x, y, crtc->fb->pitch);
- I915_WRITE(dspstride, crtc->fb->pitch);
- if (IS_I965G(dev)) {
- I915_WRITE(dspsurf, Start);
- I915_WRITE(dsptileoff, (y << 16) | x);
- I915_WRITE(dspbase, Offset);
- } else {
- I915_WRITE(dspbase, Start + Offset);
+ return ret;
}
- POSTING_READ(dspbase);
-
- if ((IS_I965G(dev) || plane == 0))
- intel_update_fbc(crtc, &crtc->mode);
-
- intel_wait_for_vblank(dev, pipe);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
obj_priv = to_intel_bo(intel_fb->obj);
i915_gem_object_unpin(intel_fb->obj);
}
- intel_increase_pllclock(crtc, true);
mutex_unlock(&dev->struct_mutex);
@@ -1911,9 +1865,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
- int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
- int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
- int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -1982,15 +1933,19 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
}
/* Enable panel fitting for LVDS */
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
- || HAS_eDP || intel_pch_has_edp(crtc)) {
- if (dev_priv->pch_pf_size) {
- temp = I915_READ(pf_ctl_reg);
- I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
- I915_WRITE(pf_win_pos, dev_priv->pch_pf_pos);
- I915_WRITE(pf_win_size, dev_priv->pch_pf_size);
- } else
- I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+ if (dev_priv->pch_pf_size &&
+ (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+ || HAS_eDP || intel_pch_has_edp(crtc))) {
+ /* Force use of hard-coded filter coefficients
+ * as some pre-programmed values are broken,
+ * e.g. x201.
+ */
+ I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1,
+ PF_ENABLE | PF_FILTER_MED_3x3);
+ I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS,
+ dev_priv->pch_pf_pos);
+ I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ,
+ dev_priv->pch_pf_size);
}
/* Enable CPU pipe */
@@ -2115,7 +2070,7 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
- if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10, 0))
+ if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100, 1))
DRM_ERROR("failed to enable transcoder\n");
}
@@ -2155,14 +2110,8 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
udelay(100);
/* Disable PF */
- temp = I915_READ(pf_ctl_reg);
- if ((temp & PF_ENABLE) != 0) {
- I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
- I915_READ(pf_ctl_reg);
- }
- I915_WRITE(pf_win_size, 0);
- POSTING_READ(pf_win_size);
-
+ I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0);
+ I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0);
/* disable CPU FDI tx and PCH FDI rx */
temp = I915_READ(fdi_tx_reg);
@@ -2421,6 +2370,9 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
int pipe = intel_crtc->pipe;
bool enabled;
+ if (intel_crtc->dpms_mode == mode)
+ return;
+
intel_crtc->dpms_mode = mode;
intel_crtc->cursor_on = mode == DRM_MODE_DPMS_ON;
@@ -2815,14 +2767,8 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
/* Don't promote wm_size to unsigned... */
if (wm_size > (long)wm->max_wm)
wm_size = wm->max_wm;
- if (wm_size <= 0) {
+ if (wm_size <= 0)
wm_size = wm->default_wm;
- DRM_ERROR("Insufficient FIFO for plane, expect flickering:"
- " entries required = %ld, available = %lu.\n",
- entries_required + wm->guard_size,
- wm->fifo_size);
- }
-
return wm_size;
}
@@ -3436,8 +3382,7 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock,
reg_value = I915_READ(WM1_LP_ILK);
reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK |
WM1_LP_CURSOR_MASK);
- reg_value |= WM1_LP_SR_EN |
- (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
+ reg_value |= (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
(sr_wm << WM1_LP_SR_SHIFT) | cursor_wm;
I915_WRITE(WM1_LP_ILK, reg_value);
@@ -3554,10 +3499,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
- bool is_edp = false;
+ struct intel_encoder *has_edp_encoder = NULL;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_encoder *encoder;
- struct intel_encoder *intel_encoder = NULL;
const intel_limit_t *limit;
int ret;
struct fdi_m_n m_n = {0};
@@ -3578,12 +3522,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
drm_vblank_pre_modeset(dev, pipe);
list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+ struct intel_encoder *intel_encoder;
- if (!encoder || encoder->crtc != crtc)
+ if (encoder->crtc != crtc)
continue;
intel_encoder = enc_to_intel_encoder(encoder);
-
switch (intel_encoder->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
@@ -3607,7 +3551,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
is_dp = true;
break;
case INTEL_OUTPUT_EDP:
- is_edp = true;
+ has_edp_encoder = intel_encoder;
break;
}
@@ -3685,10 +3629,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
int lane = 0, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
- if (is_edp) {
+ if (has_edp_encoder) {
target_clock = mode->clock;
- intel_edp_link_config(intel_encoder,
- &lane, &link_bw);
+ intel_edp_link_config(has_edp_encoder,
+ &lane, &link_bw);
} else {
/* DP over FDI requires target mode clock
instead of link clock */
@@ -3709,7 +3653,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
temp |= PIPE_8BPC;
else
temp |= PIPE_6BPC;
- } else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) {
+ } else if (has_edp_encoder || (is_dp && intel_pch_has_edp(crtc))) {
switch (dev_priv->edp_bpp/3) {
case 8:
temp |= PIPE_8BPC;
@@ -3782,7 +3726,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
udelay(200);
- if (is_edp) {
+ if (has_edp_encoder) {
if (dev_priv->lvds_use_ssc) {
temp |= DREF_SSC1_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
@@ -3931,7 +3875,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
dpll_reg = pch_dpll_reg;
}
- if (!is_edp) {
+ if (!has_edp_encoder) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
@@ -4026,7 +3970,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
}
}
- if (!is_edp) {
+ if (!has_edp_encoder) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
I915_READ(dpll_reg);
@@ -4105,7 +4049,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(link_m1_reg, m_n.link_m);
I915_WRITE(link_n1_reg, m_n.link_n);
- if (is_edp) {
+ if (has_edp_encoder) {
ironlake_set_pll_edp(crtc, adjusted_mode->clock);
} else {
/* enable FDI RX PLL too */
@@ -4911,15 +4855,6 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
kfree(intel_crtc);
}
-struct intel_unpin_work {
- struct work_struct work;
- struct drm_device *dev;
- struct drm_gem_object *old_fb_obj;
- struct drm_gem_object *pending_flip_obj;
- struct drm_pending_vblank_event *event;
- int pending;
-};
-
static void intel_unpin_work_fn(struct work_struct *__work)
{
struct intel_unpin_work *work =
@@ -5007,7 +4942,8 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane)
spin_lock_irqsave(&dev->event_lock, flags);
if (intel_crtc->unpin_work) {
- intel_crtc->unpin_work->pending = 1;
+ if ((++intel_crtc->unpin_work->pending) > 1)
+ DRM_ERROR("Prepared flip multiple times\n");
} else {
DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
}
@@ -5026,9 +4962,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
unsigned long flags, offset;
- int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
- int ret, pipesrc;
- u32 flip_mask;
+ int pipe = intel_crtc->pipe;
+ u32 pf, pipesrc;
+ int ret;
work = kzalloc(sizeof *work, GFP_KERNEL);
if (work == NULL)
@@ -5077,42 +5013,73 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
atomic_inc(&obj_priv->pending_flip);
work->pending_flip_obj = obj;
- if (intel_crtc->plane)
- flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
- else
- flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-
if (IS_GEN3(dev) || IS_GEN2(dev)) {
+ u32 flip_mask;
+
+ if (intel_crtc->plane)
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+ else
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+
BEGIN_LP_RING(2);
OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
OUT_RING(0);
ADVANCE_LP_RING();
}
+ work->enable_stall_check = true;
+
/* Offset into the new buffer for cases of shared fbs between CRTCs */
- offset = obj_priv->gtt_offset;
- offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
+ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
BEGIN_LP_RING(4);
- if (IS_I965G(dev)) {
+ switch(INTEL_INFO(dev)->gen) {
+ case 2:
OUT_RING(MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(offset | obj_priv->tiling_mode);
- pipesrc = I915_READ(pipesrc_reg);
- OUT_RING(pipesrc & 0x0fff0fff);
- } else if (IS_GEN3(dev)) {
+ OUT_RING(obj_priv->gtt_offset + offset);
+ OUT_RING(MI_NOOP);
+ break;
+
+ case 3:
OUT_RING(MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(offset);
+ OUT_RING(obj_priv->gtt_offset + offset);
OUT_RING(MI_NOOP);
- } else {
+ break;
+
+ case 4:
+ case 5:
+ /* i965+ uses the linear or tiled offsets from the
+ * Display Registers (which do not change across a page-flip)
+ * so we need only reprogram the base address.
+ */
OUT_RING(MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(offset);
- OUT_RING(MI_NOOP);
+ OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
+
+ /* XXX Enabling the panel-fitter across page-flip is so far
+ * untested on non-native modes, so ignore it for now.
+ * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+ */
+ pf = 0;
+ pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ break;
+
+ case 6:
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch | obj_priv->tiling_mode);
+ OUT_RING(obj_priv->gtt_offset);
+
+ pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+ pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ break;
}
ADVANCE_LP_RING();
@@ -5193,7 +5160,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
intel_crtc->cursor_addr = 0;
- intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
+ intel_crtc->dpms_mode = -1;
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
intel_crtc->busy = false;
@@ -5701,6 +5668,9 @@ void intel_init_clock_gating(struct drm_device *dev)
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
+ I915_WRITE(WM3_LP_ILK, 0);
+ I915_WRITE(WM2_LP_ILK, 0);
+ I915_WRITE(WM1_LP_ILK, 0);
}
/*
* Based on the document from hardware guys the following bits
@@ -5722,8 +5692,7 @@ void intel_init_clock_gating(struct drm_device *dev)
ILK_DPFC_DIS2 |
ILK_CLK_FBC);
}
- if (IS_GEN6(dev))
- return;
+ return;
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
@@ -5784,11 +5753,9 @@ void intel_init_clock_gating(struct drm_device *dev)
OUT_RING(MI_FLUSH);
ADVANCE_LP_RING();
}
- } else {
+ } else
DRM_DEBUG_KMS("Failed to allocate render context."
- "Disable RC6\n");
- return;
- }
+ "Disable RC6\n");
}
if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
OpenPOWER on IntegriCloud