diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 122 |
1 files changed, 103 insertions, 19 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8ecbc2f..5a3e785 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -38,8 +38,8 @@ #include "i915_drv.h" #include "i915_trace.h" #include "drm_dp_helper.h" - #include "drm_crtc_helper.h" +#include <linux/dma_remapping.h> #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); @@ -4669,6 +4670,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) /** * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send * @crtc: CRTC structure + * @mode: requested mode * * A pipe may be connected to one or more outputs. Based on the depth of the * attached framebuffer, choose a good color depth to use on the pipe. @@ -4680,13 +4682,15 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc * Displays may support a restricted set as well, check EDID and clamp as * appropriate. + * DP may want to dither down to 6bpc to fit larger modes * * RETURNS: * Dithering requirement (i.e. false if display bpc and pipe bpc match, * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, - unsigned int *pipe_bpp) + unsigned int *pipe_bpp, + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4711,7 +4715,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4726,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4741,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,15 +4752,20 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } } + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); + display_bpc = 6; + } + /* * We could just drive the pipe at the highest bpc all the time and * enable dithering as needed, but that costs bandwidth. So choose @@ -4789,8 +4798,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; @@ -5018,6 +5027,16 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } + /* default to 8bpc */ + pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); + if (is_dp) { + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + pipeconf |= PIPECONF_BPP_6 | + PIPECONF_DITHER_EN | + PIPECONF_DITHER_TYPE_SP; + } + } + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); @@ -5479,7 +5498,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp); + dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; @@ -5671,7 +5690,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); @@ -7188,11 +7207,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); + ret = drm_vblank_get(dev, intel_crtc->pipe); + if (ret) + goto free_work; + /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); + drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; @@ -7211,10 +7235,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, crtc->fb = fb; - ret = drm_vblank_get(dev, intel_crtc->pipe); - if (ret) - goto cleanup_objs; - work->pending_flip_obj = obj; work->enable_stall_check = true; @@ -7237,7 +7257,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); -cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); @@ -7246,6 +7265,8 @@ cleanup_objs: intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); + drm_vblank_put(dev, intel_crtc->pipe); +free_work: kfree(work); return ret; @@ -7891,6 +7912,33 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } +static bool intel_enable_rc6(struct drm_device *dev) +{ + /* + * Respect the kernel parameter if it is set + */ + if (i915_enable_rc6 >= 0) + return i915_enable_rc6; + + /* + * Disable RC6 on Ironlake + */ + if (INTEL_INFO(dev)->gen == 5) + return 0; + + /* + * Enable rc6 on Sandybridge if DMA remapping is disabled + */ + if (INTEL_INFO(dev)->gen == 6) { + DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", + intel_iommu_enabled ? "true" : "false", + !intel_iommu_enabled ? "en" : "dis"); + return !intel_iommu_enabled; + } + DRM_DEBUG_DRIVER("RC6 enabled\n"); + return 1; +} + void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); @@ -7927,7 +7975,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (i915_enable_rc6) + if (intel_enable_rc6(dev_priv->dev)) rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | GEN6_RC_CTL_RC6_ENABLE; @@ -8153,6 +8201,20 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. + */ + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: @@ -8362,7 +8424,7 @@ void ironlake_enable_rc6(struct drm_device *dev) /* rc6 disabled by default due to repeated reports of hanging during * boot and resume. */ - if (!i915_enable_rc6) + if (!intel_enable_rc6(dev)) return; mutex_lock(&dev->struct_mutex); @@ -8481,6 +8543,28 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { + dev_priv->display.force_wake_get = __gen6_gt_force_wake_get; + dev_priv->display.force_wake_put = __gen6_gt_force_wake_put; + + /* IVB configs may use multi-threaded forcewake */ + if (IS_IVYBRIDGE(dev)) { + u32 ecobus; + + mutex_lock(&dev->struct_mutex); + __gen6_gt_force_wake_mt_get(dev_priv); + ecobus = I915_READ(ECOBUS); + __gen6_gt_force_wake_mt_put(dev_priv); + mutex_unlock(&dev->struct_mutex); + + if (ecobus & FORCEWAKE_MT_ENABLE) { + DRM_DEBUG_KMS("Using MT version of forcewake\n"); + dev_priv->display.force_wake_get = + __gen6_gt_force_wake_mt_get; + dev_priv->display.force_wake_put = + __gen6_gt_force_wake_mt_put; + } + } + if (HAS_PCH_IBX(dev)) dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; else if (HAS_PCH_CPT(dev)) |