diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 488 |
1 files changed, 464 insertions, 24 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9d24d65..2d49b95 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -27,6 +27,11 @@ #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) +#define _PORT(port, a, b) ((a) + (port)*((b)-(a))) + +#define _MASKED_BIT_ENABLE(a) (((a) << 16) | (a)) +#define _MASKED_BIT_DISABLE(a) ((a) << 16) + /* * The Bridge device's PCI config space has information about the * fb aperture size and the amount of pre-reserved memory. @@ -77,6 +82,7 @@ #define GRDOM_FULL (0<<2) #define GRDOM_RENDER (1<<2) #define GRDOM_MEDIA (3<<2) +#define GRDOM_RESET_ENABLE (1<<0) #define GEN6_MBCUNIT_SNPCR 0x900c /* for LLC config */ #define GEN6_MBC_SNPCR_SHIFT 21 @@ -125,6 +131,13 @@ #define ECOCHK_PPGTT_CACHE64B (0x3<<3) #define ECOCHK_PPGTT_CACHE4B (0x0<<3) +#define GAC_ECO_BITS 0x14090 +#define ECOBITS_PPGTT_CACHE64B (3<<8) +#define ECOBITS_PPGTT_CACHE4B (0<<8) + +#define GAB_CTL 0x24000 +#define GAB_CTL_CONT_AFTER_PAGEFAULT (1<<8) + /* VGA stuff */ #define VGA_ST01_MDA 0x3ba @@ -222,6 +235,7 @@ #define MI_BATCH_NON_SECURE (1) #define MI_BATCH_NON_SECURE_I965 (1<<8) #define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) +#define MI_BATCH_GTT (2<<6) /* aliased with (1<<7) on gen4 */ #define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1) /* gen6+ */ #define MI_SEMAPHORE_GLOBAL_GTT (1<<22) #define MI_SEMAPHORE_UPDATE (1<<21) @@ -301,6 +315,61 @@ #define DEBUG_RESET_RENDER (1<<8) #define DEBUG_RESET_DISPLAY (1<<9) +/* + * DPIO - a special bus for various display related registers to hide behind: + * 0x800c: m1, m2, n, p1, p2, k dividers + * 0x8014: REF and SFR select + * 0x8014: N divider, VCO select + * 0x801c/3c: core clock bits + * 0x8048/68: low pass filter coefficients + * 0x8100: fast clock controls + */ +#define DPIO_PKT 0x2100 +#define DPIO_RID (0<<24) +#define DPIO_OP_WRITE (1<<16) +#define DPIO_OP_READ (0<<16) +#define DPIO_PORTID (0x12<<8) +#define DPIO_BYTE (0xf<<4) +#define DPIO_BUSY (1<<0) /* status only */ +#define DPIO_DATA 0x2104 +#define DPIO_REG 0x2108 +#define DPIO_CTL 0x2110 +#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ +#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ +#define DPIO_SFR_BYPASS (1<<1) +#define DPIO_RESET (1<<0) + +#define _DPIO_DIV_A 0x800c +#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ +#define DPIO_K_SHIFT (24) /* 4 bits */ +#define DPIO_P1_SHIFT (21) /* 3 bits */ +#define DPIO_P2_SHIFT (16) /* 5 bits */ +#define DPIO_N_SHIFT (12) /* 4 bits */ +#define DPIO_ENABLE_CALIBRATION (1<<11) +#define DPIO_M1DIV_SHIFT (8) /* 3 bits */ +#define DPIO_M2DIV_MASK 0xff +#define _DPIO_DIV_B 0x802c +#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B) + +#define _DPIO_REFSFR_A 0x8014 +#define DPIO_REFSEL_OVERRIDE 27 +#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */ +#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */ +#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */ +#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */ +#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */ +#define _DPIO_REFSFR_B 0x8034 +#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B) + +#define _DPIO_CORE_CLK_A 0x801c +#define _DPIO_CORE_CLK_B 0x803c +#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B) + +#define _DPIO_LFP_COEFF_A 0x8048 +#define _DPIO_LFP_COEFF_B 0x8068 +#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B) + +#define DPIO_FASTCLK_DISABLE 0x8100 /* * Fence registers @@ -360,8 +429,6 @@ #define ARB_MODE 0x04030 #define ARB_MODE_SWIZZLE_SNB (1<<4) #define ARB_MODE_SWIZZLE_IVB (1<<5) -#define ARB_MODE_ENABLE(x) GFX_MODE_ENABLE(x) -#define ARB_MODE_DISABLE(x) GFX_MODE_DISABLE(x) #define RENDER_HWS_PGA_GEN7 (0x04080) #define RING_FAULT_REG(ring) (0x4094 + 0x100*(ring)->id) #define DONE_REG 0x40b0 @@ -417,6 +484,7 @@ #define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 +#define DMA_FADD_I8XX 0x020d0 #define ERROR_GEN6 0x040a0 @@ -432,6 +500,7 @@ */ # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) #define _3D_CHICKEN3 0x02090 +#define _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL (1 << 5) #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) @@ -447,14 +516,16 @@ #define GFX_PSMI_GRANULARITY (1<<10) #define GFX_PPGTT_ENABLE (1<<9) -#define GFX_MODE_ENABLE(bit) (((bit) << 16) | (bit)) -#define GFX_MODE_DISABLE(bit) (((bit) << 16) | (0)) - #define SCPD0 0x0209c /* 915+ only */ #define IER 0x020a0 #define IIR 0x020a4 #define IMR 0x020a8 #define ISR 0x020ac +#define VLV_IIR_RW 0x182084 +#define VLV_IER 0x1820a0 +#define VLV_IIR 0x1820a4 +#define VLV_IMR 0x1820a8 +#define VLV_ISR 0x1820ac #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) #define I915_DISPLAY_PORT_INTERRUPT (1<<17) #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) @@ -500,7 +571,6 @@ #define LM_BURST_LENGTH 0x00000700 #define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ -#define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */ /* Make render/texture TLB fetches lower priorty than associated data * fetches. This is not turned on by default @@ -565,7 +635,6 @@ #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ #define CACHE_MODE_0 0x02120 /* 915+ only */ -#define CM0_MASK_SHIFT 16 #define CM0_IZ_OPT_DISABLE (1<<6) #define CM0_ZR_OPT_DISABLE (1<<5) #define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) @@ -579,7 +648,12 @@ #define ECO_GATING_CX_ONLY (1<<3) #define ECO_FLIP_DONE (1<<0) -/* GEN6 interrupt control */ +#define CACHE_MODE_1 0x7004 /* IVB+ */ +#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) + +/* GEN6 interrupt control + * Note that the per-ring interrupt bits do alias with the global interrupt bits + * in GTIMR. */ #define GEN6_RENDER_HWSTAM 0x2098 #define GEN6_RENDER_IMR 0x20a8 #define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8) @@ -615,6 +689,21 @@ #define GEN6_BSD_RNCID 0x12198 +#define GEN7_FF_THREAD_MODE 0x20a0 +#define GEN7_FF_SCHED_MASK 0x0077070 +#define GEN7_FF_TS_SCHED_HS1 (0x5<<16) +#define GEN7_FF_TS_SCHED_HS0 (0x3<<16) +#define GEN7_FF_TS_SCHED_LOAD_BALANCE (0x1<<16) +#define GEN7_FF_TS_SCHED_HW (0x0<<16) /* Default */ +#define GEN7_FF_VS_SCHED_HS1 (0x5<<12) +#define GEN7_FF_VS_SCHED_HS0 (0x3<<12) +#define GEN7_FF_VS_SCHED_LOAD_BALANCE (0x1<<12) /* Default */ +#define GEN7_FF_VS_SCHED_HW (0x0<<12) +#define GEN7_FF_DS_SCHED_HS1 (0x5<<4) +#define GEN7_FF_DS_SCHED_HS0 (0x3<<4) +#define GEN7_FF_DS_SCHED_LOAD_BALANCE (0x1<<4) /* Default */ +#define GEN7_FF_DS_SCHED_HW (0x0<<4) + /* * Framebuffer compression (915+ only) */ @@ -743,9 +832,9 @@ #define GMBUS_PORT_PANEL 3 #define GMBUS_PORT_DPC 4 /* HDMIC */ #define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ - /* 6 reserved */ -#define GMBUS_PORT_DPD 7 /* HDMID */ -#define GMBUS_NUM_PORTS 8 +#define GMBUS_PORT_DPD 6 /* HDMID */ +#define GMBUS_PORT_RESERVED 7 /* 7 reserved */ +#define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1) #define GMBUS1 0x5104 /* command/status */ #define GMBUS_SW_CLR_INT (1<<31) #define GMBUS_SW_RDY (1<<30) @@ -797,7 +886,9 @@ #define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B) #define DPLL_VCO_ENABLE (1 << 31) #define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) +#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29) #define DPLL_VGA_MODE_DIS (1 << 28) #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ #define DPLLB_MODE_LVDS (2 << 26) /* i915 */ @@ -809,6 +900,7 @@ #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ +#define DPLL_INTEGRATED_CLOCK_VLV (1<<13) #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 @@ -904,6 +996,7 @@ #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 #define _DPLL_B_MD 0x06020 /* 965+ only */ #define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD) + #define _FPA0 0x06040 #define _FPA1 0x06044 #define _FPB0 0x06048 @@ -1044,6 +1137,9 @@ #define RAMCLK_GATE_D 0x6210 /* CRL only */ #define DEUC 0x6214 /* CRL only */ +#define FW_BLC_SELF_VLV 0x6500 +#define FW_CSPWRDWNEN (1<<15) + /* * Palette regs */ @@ -1601,9 +1697,12 @@ /* Video Data Island Packet control */ #define VIDEO_DIP_DATA 0x61178 #define VIDEO_DIP_CTL 0x61170 +/* Pre HSW: */ #define VIDEO_DIP_ENABLE (1 << 31) #define VIDEO_DIP_PORT_B (1 << 29) #define VIDEO_DIP_PORT_C (2 << 29) +#define VIDEO_DIP_PORT_D (3 << 29) +#define VIDEO_DIP_PORT_MASK (3 << 29) #define VIDEO_DIP_ENABLE_AVI (1 << 21) #define VIDEO_DIP_ENABLE_VENDOR (2 << 21) #define VIDEO_DIP_ENABLE_SPD (8 << 21) @@ -1614,6 +1713,10 @@ #define VIDEO_DIP_FREQ_ONCE (0 << 16) #define VIDEO_DIP_FREQ_VSYNC (1 << 16) #define VIDEO_DIP_FREQ_2VSYNC (2 << 16) +#define VIDEO_DIP_FREQ_MASK (3 << 16) +/* HSW and later: */ +#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12) +#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) /* Panel power sequencing */ #define PP_STATUS 0x61200 @@ -2380,7 +2483,8 @@ /* Pipe A */ #define _PIPEADSL 0x70000 -#define DSL_LINEMASK 0x00000fff +#define DSL_LINEMASK_GEN2 0x00000fff +#define DSL_LINEMASK_GEN3 0x00001fff #define _PIPEACONF 0x70008 #define PIPECONF_ENABLE (1<<31) #define PIPECONF_DISABLE 0 @@ -2422,23 +2526,30 @@ #define PIPECONF_DITHER_TYPE_TEMP (3<<2) #define _PIPEASTAT 0x70024 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) +#define SPRITE1_FLIPDONE_INT_EN_VLV (1UL<<30) #define PIPE_CRC_ERROR_ENABLE (1UL<<29) #define PIPE_CRC_DONE_ENABLE (1UL<<28) #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) +#define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) #define PIPE_DPST_EVENT_ENABLE (1UL<<23) +#define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) +#define SPRITE1_FLIPDONE_INT_STATUS_VLV (1UL<<15) +#define SPRITE0_FLIPDONE_INT_STATUS_VLV (1UL<<15) #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) +#define PLANE_FLIPDONE_INT_STATUS_VLV (1UL<<10) #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) @@ -2463,6 +2574,40 @@ #define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL) #define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT) +#define VLV_DPFLIPSTAT 0x70028 +#define PIPEB_LINE_COMPARE_STATUS (1<<29) +#define PIPEB_HLINE_INT_EN (1<<28) +#define PIPEB_VBLANK_INT_EN (1<<27) +#define SPRITED_FLIPDONE_INT_EN (1<<26) +#define SPRITEC_FLIPDONE_INT_EN (1<<25) +#define PLANEB_FLIPDONE_INT_EN (1<<24) +#define PIPEA_LINE_COMPARE_STATUS (1<<21) +#define PIPEA_HLINE_INT_EN (1<<20) +#define PIPEA_VBLANK_INT_EN (1<<19) +#define SPRITEB_FLIPDONE_INT_EN (1<<18) +#define SPRITEA_FLIPDONE_INT_EN (1<<17) +#define PLANEA_FLIPDONE_INT_EN (1<<16) + +#define DPINVGTT 0x7002c /* VLV only */ +#define CURSORB_INVALID_GTT_INT_EN (1<<23) +#define CURSORA_INVALID_GTT_INT_EN (1<<22) +#define SPRITED_INVALID_GTT_INT_EN (1<<21) +#define SPRITEC_INVALID_GTT_INT_EN (1<<20) +#define PLANEB_INVALID_GTT_INT_EN (1<<19) +#define SPRITEB_INVALID_GTT_INT_EN (1<<18) +#define SPRITEA_INVALID_GTT_INT_EN (1<<17) +#define PLANEA_INVALID_GTT_INT_EN (1<<16) +#define DPINVGTT_EN_MASK 0xff0000 +#define CURSORB_INVALID_GTT_STATUS (1<<7) +#define CURSORA_INVALID_GTT_STATUS (1<<6) +#define SPRITED_INVALID_GTT_STATUS (1<<5) +#define SPRITEC_INVALID_GTT_STATUS (1<<4) +#define PLANEB_INVALID_GTT_STATUS (1<<3) +#define SPRITEB_INVALID_GTT_STATUS (1<<2) +#define SPRITEA_INVALID_GTT_STATUS (1<<1) +#define PLANEA_INVALID_GTT_STATUS (1<<0) +#define DPINVGTT_STATUS_MASK 0xff + #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) #define DSPARB_CSTART_SHIFT 7 @@ -2492,11 +2637,28 @@ #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) #define DSPFW_HPLL_SR_MASK (0x1ff) +/* drain latency register values*/ +#define DRAIN_LATENCY_PRECISION_32 32 +#define DRAIN_LATENCY_PRECISION_16 16 +#define VLV_DDL1 0x70050 +#define DDL_CURSORA_PRECISION_32 (1<<31) +#define DDL_CURSORA_PRECISION_16 (0<<31) +#define DDL_CURSORA_SHIFT 24 +#define DDL_PLANEA_PRECISION_32 (1<<7) +#define DDL_PLANEA_PRECISION_16 (0<<7) +#define VLV_DDL2 0x70054 +#define DDL_CURSORB_PRECISION_32 (1<<31) +#define DDL_CURSORB_PRECISION_16 (0<<31) +#define DDL_CURSORB_SHIFT 24 +#define DDL_PLANEB_PRECISION_32 (1<<7) +#define DDL_PLANEB_PRECISION_16 (0<<7) + /* FIFO watermark sizes etc */ #define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 +#define VALLEYVIEW_FIFO_SIZE 255 #define G4X_FIFO_SIZE 127 #define I965_FIFO_SIZE 512 #define I945_FIFO_SIZE 127 @@ -2504,6 +2666,7 @@ #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 +#define VALLEYVIEW_MAX_WM 0xff #define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f @@ -2518,6 +2681,7 @@ #define PINEVIEW_CURSOR_DFT_WM 0 #define PINEVIEW_CURSOR_GUARD_WM 5 +#define VALLEYVIEW_CURSOR_MAX_WM 64 #define I965_CURSOR_FIFO 64 #define I965_CURSOR_MAX_WM 32 #define I965_CURSOR_DFT_WM 8 @@ -2726,6 +2890,13 @@ #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF) #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF) +/* Display/Sprite base address macros */ +#define DISP_BASEADDR_MASK (0xfffff000) +#define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK) +#define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK) +#define I915_MODIFY_DISPBASE(reg, gfx_addr) \ + (I915_WRITE(reg, gfx_addr | I915_LO_DISPBASE(I915_READ(reg)))) + /* VBIOS flags */ #define SWF00 0x71410 #define SWF01 0x71414 @@ -3058,25 +3229,38 @@ #define DE_PCH_EVENT_IVB (1<<28) #define DE_DP_A_HOTPLUG_IVB (1<<27) #define DE_AUX_CHANNEL_A_IVB (1<<26) +#define DE_SPRITEC_FLIP_DONE_IVB (1<<14) +#define DE_PLANEC_FLIP_DONE_IVB (1<<13) +#define DE_PIPEC_VBLANK_IVB (1<<10) #define DE_SPRITEB_FLIP_DONE_IVB (1<<9) -#define DE_SPRITEA_FLIP_DONE_IVB (1<<4) #define DE_PLANEB_FLIP_DONE_IVB (1<<8) -#define DE_PLANEA_FLIP_DONE_IVB (1<<3) #define DE_PIPEB_VBLANK_IVB (1<<5) +#define DE_SPRITEA_FLIP_DONE_IVB (1<<4) +#define DE_PLANEA_FLIP_DONE_IVB (1<<3) #define DE_PIPEA_VBLANK_IVB (1<<0) +#define VLV_MASTER_IER 0x4400c /* Gunit master IER */ +#define MASTER_INTERRUPT_ENABLE (1<<31) + #define DEISR 0x44000 #define DEIMR 0x44004 #define DEIIR 0x44008 #define DEIER 0x4400c -/* GT interrupt */ -#define GT_PIPE_NOTIFY (1 << 4) -#define GT_SYNC_STATUS (1 << 2) -#define GT_USER_INTERRUPT (1 << 0) -#define GT_BSD_USER_INTERRUPT (1 << 5) -#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12) -#define GT_BLT_USER_INTERRUPT (1 << 22) +/* GT interrupt. + * Note that for gen6+ the ring-specific interrupt bits do alias with the + * corresponding bits in the per-ring interrupt control registers. */ +#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) +#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25) +#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22) +#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15) +#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12) +#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */ +#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5) +#define GT_PIPE_NOTIFY (1 << 4) +#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3) +#define GT_SYNC_STATUS (1 << 2) +#define GT_USER_INTERRUPT (1 << 0) #define GTISR 0x44010 #define GTIMR 0x44014 @@ -3226,15 +3410,15 @@ #define _PCH_DPLL_A 0xc6014 #define _PCH_DPLL_B 0xc6018 -#define PCH_DPLL(pipe) (pipe == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) +#define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) #define _PCH_FPA0 0xc6040 #define FP_CB_TUNE (0x3<<22) #define _PCH_FPA1 0xc6044 #define _PCH_FPB0 0xc6048 #define _PCH_FPB1 0xc604c -#define PCH_FP0(pipe) (pipe == 0 ? _PCH_FPA0 : _PCH_FPB0) -#define PCH_FP1(pipe) (pipe == 0 ? _PCH_FPA1 : _PCH_FPB1) +#define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) +#define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) #define PCH_DPLL_TEST 0xc606c @@ -3329,6 +3513,57 @@ #define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) #define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) +#define VLV_VIDEO_DIP_CTL_A 0x60220 +#define VLV_VIDEO_DIP_DATA_A 0x60208 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210 + +#define VLV_VIDEO_DIP_CTL_B 0x61170 +#define VLV_VIDEO_DIP_DATA_B 0x61174 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178 + +#define VLV_TVIDEO_DIP_CTL(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B) +#define VLV_TVIDEO_DIP_DATA(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B) +#define VLV_TVIDEO_DIP_GCP(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B) + +/* Haswell DIP controls */ +#define HSW_VIDEO_DIP_CTL_A 0x60200 +#define HSW_VIDEO_DIP_AVI_DATA_A 0x60220 +#define HSW_VIDEO_DIP_VS_DATA_A 0x60260 +#define HSW_VIDEO_DIP_SPD_DATA_A 0x602A0 +#define HSW_VIDEO_DIP_GMP_DATA_A 0x602E0 +#define HSW_VIDEO_DIP_VSC_DATA_A 0x60320 +#define HSW_VIDEO_DIP_AVI_ECC_A 0x60240 +#define HSW_VIDEO_DIP_VS_ECC_A 0x60280 +#define HSW_VIDEO_DIP_SPD_ECC_A 0x602C0 +#define HSW_VIDEO_DIP_GMP_ECC_A 0x60300 +#define HSW_VIDEO_DIP_VSC_ECC_A 0x60344 +#define HSW_VIDEO_DIP_GCP_A 0x60210 + +#define HSW_VIDEO_DIP_CTL_B 0x61200 +#define HSW_VIDEO_DIP_AVI_DATA_B 0x61220 +#define HSW_VIDEO_DIP_VS_DATA_B 0x61260 +#define HSW_VIDEO_DIP_SPD_DATA_B 0x612A0 +#define HSW_VIDEO_DIP_GMP_DATA_B 0x612E0 +#define HSW_VIDEO_DIP_VSC_DATA_B 0x61320 +#define HSW_VIDEO_DIP_BVI_ECC_B 0x61240 +#define HSW_VIDEO_DIP_VS_ECC_B 0x61280 +#define HSW_VIDEO_DIP_SPD_ECC_B 0x612C0 +#define HSW_VIDEO_DIP_GMP_ECC_B 0x61300 +#define HSW_VIDEO_DIP_VSC_ECC_B 0x61344 +#define HSW_VIDEO_DIP_GCP_B 0x61210 + +#define HSW_TVIDEO_DIP_CTL(pipe) \ + _PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B) +#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \ + _PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B) +#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \ + _PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B) +#define HSW_TVIDEO_DIP_GCP(pipe) \ + _PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B) + #define _TRANS_HTOTAL_B 0xe1000 #define _TRANS_HBLANK_B 0xe1004 #define _TRANS_HSYNC_B 0xe1008 @@ -3489,6 +3724,9 @@ #define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8) #define FDI_LINK_TRAIN_NORMAL_CPT (3<<8) #define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8) +/* LPT */ +#define FDI_PORT_WIDTH_2X_LPT (1<<19) +#define FDI_PORT_WIDTH_1X_LPT (0<<19) #define _FDI_RXA_MISC 0xf0010 #define _FDI_RXB_MISC 0xf1010 @@ -3549,6 +3787,7 @@ #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) /* or SDVOB */ +#define VLV_HDMIB 0x61140 #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) #define TRANSCODER(pipe) ((pipe) << 30) @@ -3714,6 +3953,8 @@ #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) #define FORCEWAKE 0xA18C +#define FORCEWAKE_VLV 0x1300b0 +#define FORCEWAKE_ACK_VLV 0x1300b4 #define FORCEWAKE_ACK 0x130090 #define FORCEWAKE_MT 0xa188 /* multi-threaded */ #define FORCEWAKE_MT_ACK 0x130040 @@ -3731,6 +3972,7 @@ #define GEN6_UCGCTL1 0x9400 # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) +# define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) #define GEN6_UCGCTL2 0x9404 # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) @@ -3811,6 +4053,11 @@ GEN6_PM_RP_DOWN_THRESHOLD | \ GEN6_PM_RP_DOWN_TIMEOUT) +#define GEN6_GT_GFX_RC6_LOCKED 0x138104 +#define GEN6_GT_GFX_RC6 0x138108 +#define GEN6_GT_GFX_RC6p 0x13810C +#define GEN6_GT_GFX_RC6pp 0x138110 + #define GEN6_PCODE_MAILBOX 0x138124 #define GEN6_PCODE_READY (1<<31) #define GEN6_READ_OC_PARAMS 0xc @@ -3870,4 +4117,197 @@ #define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16) #define AUD_CONFIG_DISABLE_NCTS (1 << 3) +/* HSW Power Wells */ +#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */ +#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */ +#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */ +#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */ +#define HSW_PWR_WELL_ENABLE (1<<31) +#define HSW_PWR_WELL_STATE (1<<30) +#define HSW_PWR_WELL_CTL5 0x45410 +#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) +#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) +#define HSW_PWR_WELL_FORCE_ON (1<<19) +#define HSW_PWR_WELL_CTL6 0x45414 + +/* Per-pipe DDI Function Control */ +#define PIPE_DDI_FUNC_CTL_A 0x60400 +#define PIPE_DDI_FUNC_CTL_B 0x61400 +#define PIPE_DDI_FUNC_CTL_C 0x62400 +#define PIPE_DDI_FUNC_CTL_EDP 0x6F400 +#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \ + PIPE_DDI_FUNC_CTL_A, \ + PIPE_DDI_FUNC_CTL_B) +#define PIPE_DDI_FUNC_ENABLE (1<<31) +/* Those bits are ignored by pipe EDP since it can only connect to DDI A */ +#define PIPE_DDI_PORT_MASK (0xf<<28) +#define PIPE_DDI_SELECT_PORT(x) ((x)<<28) +#define PIPE_DDI_MODE_SELECT_HDMI (0<<24) +#define PIPE_DDI_MODE_SELECT_DVI (1<<24) +#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24) +#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24) +#define PIPE_DDI_MODE_SELECT_FDI (4<<24) +#define PIPE_DDI_BPC_8 (0<<20) +#define PIPE_DDI_BPC_10 (1<<20) +#define PIPE_DDI_BPC_6 (2<<20) +#define PIPE_DDI_BPC_12 (3<<20) +#define PIPE_DDI_BFI_ENABLE (1<<4) +#define PIPE_DDI_PORT_WIDTH_X1 (0<<1) +#define PIPE_DDI_PORT_WIDTH_X2 (1<<1) +#define PIPE_DDI_PORT_WIDTH_X4 (3<<1) + +/* DisplayPort Transport Control */ +#define DP_TP_CTL_A 0x64040 +#define DP_TP_CTL_B 0x64140 +#define DP_TP_CTL(port) _PORT(port, \ + DP_TP_CTL_A, \ + DP_TP_CTL_B) +#define DP_TP_CTL_ENABLE (1<<31) +#define DP_TP_CTL_MODE_SST (0<<27) +#define DP_TP_CTL_MODE_MST (1<<27) +#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18) +#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15) +#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8) +#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8) +#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8) +#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8) + +/* DisplayPort Transport Status */ +#define DP_TP_STATUS_A 0x64044 +#define DP_TP_STATUS_B 0x64144 +#define DP_TP_STATUS(port) _PORT(port, \ + DP_TP_STATUS_A, \ + DP_TP_STATUS_B) +#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12) + +/* DDI Buffer Control */ +#define DDI_BUF_CTL_A 0x64000 +#define DDI_BUF_CTL_B 0x64100 +#define DDI_BUF_CTL(port) _PORT(port, \ + DDI_BUF_CTL_A, \ + DDI_BUF_CTL_B) +#define DDI_BUF_CTL_ENABLE (1<<31) +#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */ +#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */ +#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */ +#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */ +#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */ +#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */ +#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */ +#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */ +#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */ +#define DDI_BUF_EMP_MASK (0xf<<24) +#define DDI_BUF_IS_IDLE (1<<7) +#define DDI_PORT_WIDTH_X1 (0<<1) +#define DDI_PORT_WIDTH_X2 (1<<1) +#define DDI_PORT_WIDTH_X4 (3<<1) +#define DDI_INIT_DISPLAY_DETECTED (1<<0) + +/* DDI Buffer Translations */ +#define DDI_BUF_TRANS_A 0x64E00 +#define DDI_BUF_TRANS_B 0x64E60 +#define DDI_BUF_TRANS(port) _PORT(port, \ + DDI_BUF_TRANS_A, \ + DDI_BUF_TRANS_B) + +/* Sideband Interface (SBI) is programmed indirectly, via + * SBI_ADDR, which contains the register offset; and SBI_DATA, + * which contains the payload */ +#define SBI_ADDR 0xC6000 +#define SBI_DATA 0xC6004 +#define SBI_CTL_STAT 0xC6008 +#define SBI_CTL_OP_CRRD (0x6<<8) +#define SBI_CTL_OP_CRWR (0x7<<8) +#define SBI_RESPONSE_FAIL (0x1<<1) +#define SBI_RESPONSE_SUCCESS (0x0<<1) +#define SBI_BUSY (0x1<<0) +#define SBI_READY (0x0<<0) + +/* SBI offsets */ +#define SBI_SSCDIVINTPHASE6 0x0600 +#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1) +#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1) +#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8) +#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8) +#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15) +#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0) +#define SBI_SSCCTL 0x020c +#define SBI_SSCCTL6 0x060C +#define SBI_SSCCTL_DISABLE (1<<0) +#define SBI_SSCAUXDIV6 0x0610 +#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) +#define SBI_DBUFF0 0x2a00 + +/* LPT PIXCLK_GATE */ +#define PIXCLK_GATE 0xC6020 +#define PIXCLK_GATE_UNGATE 1<<0 +#define PIXCLK_GATE_GATE 0<<0 + +/* SPLL */ +#define SPLL_CTL 0x46020 +#define SPLL_PLL_ENABLE (1<<31) +#define SPLL_PLL_SCC (1<<28) +#define SPLL_PLL_NON_SCC (2<<28) +#define SPLL_PLL_FREQ_810MHz (0<<26) +#define SPLL_PLL_FREQ_1350MHz (1<<26) + +/* WRPLL */ +#define WRPLL_CTL1 0x46040 +#define WRPLL_CTL2 0x46060 +#define WRPLL_PLL_ENABLE (1<<31) +#define WRPLL_PLL_SELECT_SSC (0x01<<28) +#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28) +#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28) +/* WRPLL divider programming */ +#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0) +#define WRPLL_DIVIDER_POST(x) ((x)<<8) +#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16) + +/* Port clock selection */ +#define PORT_CLK_SEL_A 0x46100 +#define PORT_CLK_SEL_B 0x46104 +#define PORT_CLK_SEL(port) _PORT(port, \ + PORT_CLK_SEL_A, \ + PORT_CLK_SEL_B) +#define PORT_CLK_SEL_LCPLL_2700 (0<<29) +#define PORT_CLK_SEL_LCPLL_1350 (1<<29) +#define PORT_CLK_SEL_LCPLL_810 (2<<29) +#define PORT_CLK_SEL_SPLL (3<<29) +#define PORT_CLK_SEL_WRPLL1 (4<<29) +#define PORT_CLK_SEL_WRPLL2 (5<<29) + +/* Pipe clock selection */ +#define PIPE_CLK_SEL_A 0x46140 +#define PIPE_CLK_SEL_B 0x46144 +#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \ + PIPE_CLK_SEL_A, \ + PIPE_CLK_SEL_B) +/* For each pipe, we need to select the corresponding port clock */ +#define PIPE_CLK_SEL_DISABLED (0x0<<29) +#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29) + +/* LCPLL Control */ +#define LCPLL_CTL 0x130040 +#define LCPLL_PLL_DISABLE (1<<31) +#define LCPLL_PLL_LOCK (1<<30) +#define LCPLL_CD_CLOCK_DISABLE (1<<25) +#define LCPLL_CD2X_CLOCK_DISABLE (1<<23) + +/* Pipe WM_LINETIME - watermark line time */ +#define PIPE_WM_LINETIME_A 0x45270 +#define PIPE_WM_LINETIME_B 0x45274 +#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \ + PIPE_WM_LINETIME_A, \ + PIPE_WM_LINETIME_A) +#define PIPE_WM_LINETIME_MASK (0x1ff) +#define PIPE_WM_LINETIME_TIME(x) ((x)) +#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) +#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16) + +/* SFUSE_STRAP */ +#define SFUSE_STRAP 0xc2014 +#define SFUSE_STRAP_DDIB_DETECTED (1<<2) +#define SFUSE_STRAP_DDIC_DETECTED (1<<1) +#define SFUSE_STRAP_DDID_DETECTED (1<<0) + #endif /* _I915_REG_H_ */ |
