summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-sx150x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-sx150x.c')
-rw-r--r--drivers/gpio/gpio-sx150x.c792
1 files changed, 0 insertions, 792 deletions
diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
deleted file mode 100644
index af95de8..0000000
--- a/drivers/gpio/gpio-sx150x.c
+++ /dev/null
@@ -1,792 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * Driver for Semtech SX150X I2C GPIO Expanders
- *
- * Author: Gregory Bean <gbean@codeaurora.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#include <linux/of_device.h>
-
-#define NO_UPDATE_PENDING -1
-
-/* The chip models of sx150x */
-#define SX150X_123 0
-#define SX150X_456 1
-#define SX150X_789 2
-
-struct sx150x_123_pri {
- u8 reg_pld_mode;
- u8 reg_pld_table0;
- u8 reg_pld_table1;
- u8 reg_pld_table2;
- u8 reg_pld_table3;
- u8 reg_pld_table4;
- u8 reg_advance;
-};
-
-struct sx150x_456_pri {
- u8 reg_pld_mode;
- u8 reg_pld_table0;
- u8 reg_pld_table1;
- u8 reg_pld_table2;
- u8 reg_pld_table3;
- u8 reg_pld_table4;
- u8 reg_advance;
-};
-
-struct sx150x_789_pri {
- u8 reg_drain;
- u8 reg_polarity;
- u8 reg_clock;
- u8 reg_misc;
- u8 reg_reset;
- u8 ngpios;
-};
-
-struct sx150x_device_data {
- u8 model;
- u8 reg_pullup;
- u8 reg_pulldn;
- u8 reg_dir;
- u8 reg_data;
- u8 reg_irq_mask;
- u8 reg_irq_src;
- u8 reg_sense;
- u8 ngpios;
- union {
- struct sx150x_123_pri x123;
- struct sx150x_456_pri x456;
- struct sx150x_789_pri x789;
- } pri;
-};
-
-/**
- * struct sx150x_platform_data - config data for SX150x driver
- * @gpio_base: The index number of the first GPIO assigned to this
- * GPIO expander. The expander will create a block of
- * consecutively numbered gpios beginning at the given base,
- * with the size of the block depending on the model of the
- * expander chip.
- * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
- * instead of as an oscillator, increasing the size of the
- * GP(I)O pool created by this expander by one. The
- * output-only GPO pin will be added at the end of the block.
- * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
- * for each IO line in the expander. Setting the bit at
- * position n will enable the pull-up for the IO at
- * the corresponding offset. For chips with fewer than
- * 16 IO pins, high-end bits are ignored.
- * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
- * resistor for each IO line in the expander. Setting the
- * bit at position n will enable the pull-down for the IO at
- * the corresponding offset. For chips with fewer than
- * 16 IO pins, high-end bits are ignored.
- * @io_polarity: A bit-mask which enables polarity inversion for each IO line
- * in the expander. Setting the bit at position n inverts
- * the polarity of that IO line, while clearing it results
- * in normal polarity. For chips with fewer than 16 IO pins,
- * high-end bits are ignored.
- * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
- * is connected, via which it reports interrupt events
- * across all GPIO lines. This must be a real,
- * pre-existing IRQ line.
- * Setting this value < 0 disables the irq_chip functionality
- * of the driver.
- * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
- * IRQ lines will appear. Similarly to gpio_base, the expander
- * will create a block of irqs beginning at this number.
- * This value is ignored if irq_summary is < 0.
- * @reset_during_probe: If set to true, the driver will trigger a full
- * reset of the chip at the beginning of the probe
- * in order to place it in a known state.
- */
-struct sx150x_platform_data {
- unsigned gpio_base;
- bool oscio_is_gpo;
- u16 io_pullup_ena;
- u16 io_pulldn_ena;
- u16 io_polarity;
- int irq_summary;
- unsigned irq_base;
- bool reset_during_probe;
-};
-
-struct sx150x_chip {
- struct gpio_chip gpio_chip;
- struct i2c_client *client;
- const struct sx150x_device_data *dev_cfg;
- int irq_summary;
- int irq_base;
- int irq_update;
- u32 irq_sense;
- u32 irq_masked;
- u32 dev_sense;
- u32 dev_masked;
- struct irq_chip irq_chip;
- struct mutex lock;
-};
-
-static const struct sx150x_device_data sx150x_devices[] = {
- [0] = { /* sx1508q */
- .model = SX150X_789,
- .reg_pullup = 0x03,
- .reg_pulldn = 0x04,
- .reg_dir = 0x07,
- .reg_data = 0x08,
- .reg_irq_mask = 0x09,
- .reg_irq_src = 0x0c,
- .reg_sense = 0x0b,
- .pri.x789 = {
- .reg_drain = 0x05,
- .reg_polarity = 0x06,
- .reg_clock = 0x0f,
- .reg_misc = 0x10,
- .reg_reset = 0x7d,
- },
- .ngpios = 8,
- },
- [1] = { /* sx1509q */
- .model = SX150X_789,
- .reg_pullup = 0x07,
- .reg_pulldn = 0x09,
- .reg_dir = 0x0f,
- .reg_data = 0x11,
- .reg_irq_mask = 0x13,
- .reg_irq_src = 0x19,
- .reg_sense = 0x17,
- .pri.x789 = {
- .reg_drain = 0x0b,
- .reg_polarity = 0x0d,
- .reg_clock = 0x1e,
- .reg_misc = 0x1f,
- .reg_reset = 0x7d,
- },
- .ngpios = 16
- },
- [2] = { /* sx1506q */
- .model = SX150X_456,
- .reg_pullup = 0x05,
- .reg_pulldn = 0x07,
- .reg_dir = 0x03,
- .reg_data = 0x01,
- .reg_irq_mask = 0x09,
- .reg_irq_src = 0x0f,
- .reg_sense = 0x0d,
- .pri.x456 = {
- .reg_pld_mode = 0x21,
- .reg_pld_table0 = 0x23,
- .reg_pld_table1 = 0x25,
- .reg_pld_table2 = 0x27,
- .reg_pld_table3 = 0x29,
- .reg_pld_table4 = 0x2b,
- .reg_advance = 0xad,
- },
- .ngpios = 16
- },
- [3] = { /* sx1502q */
- .model = SX150X_123,
- .reg_pullup = 0x02,
- .reg_pulldn = 0x03,
- .reg_dir = 0x01,
- .reg_data = 0x00,
- .reg_irq_mask = 0x05,
- .reg_irq_src = 0x08,
- .reg_sense = 0x07,
- .pri.x123 = {
- .reg_pld_mode = 0x10,
- .reg_pld_table0 = 0x11,
- .reg_pld_table1 = 0x12,
- .reg_pld_table2 = 0x13,
- .reg_pld_table3 = 0x14,
- .reg_pld_table4 = 0x15,
- .reg_advance = 0xad,
- },
- .ngpios = 8,
- },
-};
-
-static const struct i2c_device_id sx150x_id[] = {
- {"sx1508q", 0},
- {"sx1509q", 1},
- {"sx1506q", 2},
- {"sx1502q", 3},
- {}
-};
-
-static const struct of_device_id sx150x_of_match[] = {
- { .compatible = "semtech,sx1508q" },
- { .compatible = "semtech,sx1509q" },
- { .compatible = "semtech,sx1506q" },
- { .compatible = "semtech,sx1502q" },
- {},
-};
-
-static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
-{
- s32 err = i2c_smbus_write_byte_data(client, reg, val);
-
- if (err < 0)
- dev_warn(&client->dev,
- "i2c write fail: can't write %02x to %02x: %d\n",
- val, reg, err);
- return err;
-}
-
-static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
-{
- s32 err = i2c_smbus_read_byte_data(client, reg);
-
- if (err >= 0)
- *val = err;
- else
- dev_warn(&client->dev,
- "i2c read fail: can't read from %02x: %d\n",
- reg, err);
- return err;
-}
-
-static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
-{
- return (chip->dev_cfg->ngpios == offset);
-}
-
-/*
- * These utility functions solve the common problem of locating and setting
- * configuration bits. Configuration bits are grouped into registers
- * whose indexes increase downwards. For example, with eight-bit registers,
- * sixteen gpios would have their config bits grouped in the following order:
- * REGISTER N-1 [ f e d c b a 9 8 ]
- * N [ 7 6 5 4 3 2 1 0 ]
- *
- * For multi-bit configurations, the pattern gets wider:
- * REGISTER N-3 [ f f e e d d c c ]
- * N-2 [ b b a a 9 9 8 8 ]
- * N-1 [ 7 7 6 6 5 5 4 4 ]
- * N [ 3 3 2 2 1 1 0 0 ]
- *
- * Given the address of the starting register 'N', the index of the gpio
- * whose configuration we seek to change, and the width in bits of that
- * configuration, these functions allow us to locate the correct
- * register and mask the correct bits.
- */
-static inline void sx150x_find_cfg(u8 offset, u8 width,
- u8 *reg, u8 *mask, u8 *shift)
-{
- *reg -= offset * width / 8;
- *mask = (1 << width) - 1;
- *shift = (offset * width) % 8;
- *mask <<= *shift;
-}
-
-static s32 sx150x_write_cfg(struct sx150x_chip *chip,
- u8 offset, u8 width, u8 reg, u8 val)
-{
- u8 mask;
- u8 data;
- u8 shift;
- s32 err;
-
- sx150x_find_cfg(offset, width, &reg, &mask, &shift);
- err = sx150x_i2c_read(chip->client, reg, &data);
- if (err < 0)
- return err;
-
- data &= ~mask;
- data |= (val << shift) & mask;
- return sx150x_i2c_write(chip->client, reg, data);
-}
-
-static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
-{
- u8 reg = chip->dev_cfg->reg_data;
- u8 mask;
- u8 data;
- u8 shift;
- s32 err;
-
- sx150x_find_cfg(offset, 1, &reg, &mask, &shift);
- err = sx150x_i2c_read(chip->client, reg, &data);
- if (err >= 0)
- err = (data & mask) != 0 ? 1 : 0;
-
- return err;
-}
-
-static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
-{
- sx150x_i2c_write(chip->client,
- chip->dev_cfg->pri.x789.reg_clock,
- (val ? 0x1f : 0x10));
-}
-
-static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
-{
- sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->reg_data,
- (val ? 1 : 0));
-}
-
-static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
-{
- return sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->reg_dir,
- 1);
-}
-
-static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
-{
- int err;
-
- err = sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->reg_data,
- (val ? 1 : 0));
- if (err >= 0)
- err = sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->reg_dir,
- 0);
- return err;
-}
-
-static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
-{
- struct sx150x_chip *chip = gpiochip_get_data(gc);
- int status = -EINVAL;
-
- if (!offset_is_oscio(chip, offset)) {
- mutex_lock(&chip->lock);
- status = sx150x_get_io(chip, offset);
- mutex_unlock(&chip->lock);
- }
-
- return (status < 0) ? status : !!status;
-}
-
-static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
-{
- struct sx150x_chip *chip = gpiochip_get_data(gc);
-
- mutex_lock(&chip->lock);
- if (offset_is_oscio(chip, offset))
- sx150x_set_oscio(chip, val);
- else
- sx150x_set_io(chip, offset, val);
- mutex_unlock(&chip->lock);
-}
-
-static int sx150x_gpio_set_single_ended(struct gpio_chip *gc,
- unsigned offset,
- enum single_ended_mode mode)
-{
- struct sx150x_chip *chip = gpiochip_get_data(gc);
-
- /* On the SX160X 789 we can set open drain */
- if (chip->dev_cfg->model != SX150X_789)
- return -ENOTSUPP;
-
- if (mode == LINE_MODE_PUSH_PULL)
- return sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->pri.x789.reg_drain,
- 0);
-
- if (mode == LINE_MODE_OPEN_DRAIN)
- return sx150x_write_cfg(chip,
- offset,
- 1,
- chip->dev_cfg->pri.x789.reg_drain,
- 1);
- return -ENOTSUPP;
-}
-
-static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
-{
- struct sx150x_chip *chip = gpiochip_get_data(gc);
- int status = -EINVAL;
-
- if (!offset_is_oscio(chip, offset)) {
- mutex_lock(&chip->lock);
- status = sx150x_io_input(chip, offset);
- mutex_unlock(&chip->lock);
- }
- return status;
-}
-
-static int sx150x_gpio_direction_output(struct gpio_chip *gc,
- unsigned offset,
- int val)
-{
- struct sx150x_chip *chip = gpiochip_get_data(gc);
- int status = 0;
-
- if (!offset_is_oscio(chip, offset)) {
- mutex_lock(&chip->lock);
- status = sx150x_io_output(chip, offset, val);
- mutex_unlock(&chip->lock);
- }
- return status;
-}
-
-static void sx150x_irq_mask(struct irq_data *d)
-{
- struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- unsigned n = d->hwirq;
-
- chip->irq_masked |= (1 << n);
- chip->irq_update = n;
-}
-
-static void sx150x_irq_unmask(struct irq_data *d)
-{
- struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- unsigned n = d->hwirq;
-
- chip->irq_masked &= ~(1 << n);
- chip->irq_update = n;
-}
-
-static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- unsigned n, val = 0;
-
- if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
- return -EINVAL;
-
- n = d->hwirq;
-
- if (flow_type & IRQ_TYPE_EDGE_RISING)
- val |= 0x1;
- if (flow_type & IRQ_TYPE_EDGE_FALLING)
- val |= 0x2;
-
- chip->irq_sense &= ~(3UL << (n * 2));
- chip->irq_sense |= val << (n * 2);
- chip->irq_update = n;
- return 0;
-}
-
-static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
-{
- struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
- unsigned nhandled = 0;
- unsigned sub_irq;
- unsigned n;
- s32 err;
- u8 val;
- int i;
-
- for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
- err = sx150x_i2c_read(chip->client,
- chip->dev_cfg->reg_irq_src - i,
- &val);
- if (err < 0)
- continue;
-
- sx150x_i2c_write(chip->client,
- chip->dev_cfg->reg_irq_src - i,
- val);
- for (n = 0; n < 8; ++n) {
- if (val & (1 << n)) {
- sub_irq = irq_find_mapping(
- chip->gpio_chip.irqdomain,
- (i * 8) + n);
- handle_nested_irq(sub_irq);
- ++nhandled;
- }
- }
- }
-
- return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
-}
-
-static void sx150x_irq_bus_lock(struct irq_data *d)
-{
- struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-
- mutex_lock(&chip->lock);
-}
-
-static void sx150x_irq_bus_sync_unlock(struct irq_data *d)
-{
- struct sx150x_chip *chip = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- unsigned n;
-
- if (chip->irq_update == NO_UPDATE_PENDING)
- goto out;
-
- n = chip->irq_update;
- chip->irq_update = NO_UPDATE_PENDING;
-
- /* Avoid updates if nothing changed */
- if (chip->dev_sense == chip->irq_sense &&
- chip->dev_masked == chip->irq_masked)
- goto out;
-
- chip->dev_sense = chip->irq_sense;
- chip->dev_masked = chip->irq_masked;
-
- if (chip->irq_masked & (1 << n)) {
- sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1);
- sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0);
- } else {
- sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0);
- sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense,
- chip->irq_sense >> (n * 2));
- }
-out:
- mutex_unlock(&chip->lock);
-}
-
-static void sx150x_init_chip(struct sx150x_chip *chip,
- struct i2c_client *client,
- kernel_ulong_t driver_data,
- struct sx150x_platform_data *pdata)
-{
- mutex_init(&chip->lock);
-
- chip->client = client;
- chip->dev_cfg = &sx150x_devices[driver_data];
- chip->gpio_chip.parent = &client->dev;
- chip->gpio_chip.label = client->name;
- chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
- chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
- chip->gpio_chip.get = sx150x_gpio_get;
- chip->gpio_chip.set = sx150x_gpio_set;
- chip->gpio_chip.set_single_ended = sx150x_gpio_set_single_ended;
- chip->gpio_chip.base = pdata->gpio_base;
- chip->gpio_chip.can_sleep = true;
- chip->gpio_chip.ngpio = chip->dev_cfg->ngpios;
-#ifdef CONFIG_OF_GPIO
- chip->gpio_chip.of_node = client->dev.of_node;
- chip->gpio_chip.of_gpio_n_cells = 2;
-#endif
- if (pdata->oscio_is_gpo)
- ++chip->gpio_chip.ngpio;
-
- chip->irq_chip.name = client->name;
- chip->irq_chip.irq_mask = sx150x_irq_mask;
- chip->irq_chip.irq_unmask = sx150x_irq_unmask;
- chip->irq_chip.irq_set_type = sx150x_irq_set_type;
- chip->irq_chip.irq_bus_lock = sx150x_irq_bus_lock;
- chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
- chip->irq_summary = -1;
- chip->irq_base = -1;
- chip->irq_masked = ~0;
- chip->irq_sense = 0;
- chip->dev_masked = ~0;
- chip->dev_sense = 0;
- chip->irq_update = NO_UPDATE_PENDING;
-}
-
-static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
-{
- int err = 0;
- unsigned n;
-
- for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
- err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
- return err;
-}
-
-static int sx150x_reset(struct sx150x_chip *chip)
-{
- int err;
-
- err = i2c_smbus_write_byte_data(chip->client,
- chip->dev_cfg->pri.x789.reg_reset,
- 0x12);
- if (err < 0)
- return err;
-
- err = i2c_smbus_write_byte_data(chip->client,
- chip->dev_cfg->pri.x789.reg_reset,
- 0x34);
- return err;
-}
-
-static int sx150x_init_hw(struct sx150x_chip *chip,
- struct sx150x_platform_data *pdata)
-{
- int err = 0;
-
- if (pdata->reset_during_probe) {
- err = sx150x_reset(chip);
- if (err < 0)
- return err;
- }
-
- if (chip->dev_cfg->model == SX150X_789)
- err = sx150x_i2c_write(chip->client,
- chip->dev_cfg->pri.x789.reg_misc,
- 0x01);
- else if (chip->dev_cfg->model == SX150X_456)
- err = sx150x_i2c_write(chip->client,
- chip->dev_cfg->pri.x456.reg_advance,
- 0x04);
- else
- err = sx150x_i2c_write(chip->client,
- chip->dev_cfg->pri.x123.reg_advance,
- 0x00);
- if (err < 0)
- return err;
-
- err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
- pdata->io_pullup_ena);
- if (err < 0)
- return err;
-
- err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
- pdata->io_pulldn_ena);
- if (err < 0)
- return err;
-
- if (chip->dev_cfg->model == SX150X_789) {
- err = sx150x_init_io(chip,
- chip->dev_cfg->pri.x789.reg_polarity,
- pdata->io_polarity);
- if (err < 0)
- return err;
- } else if (chip->dev_cfg->model == SX150X_456) {
- /* Set all pins to work in normal mode */
- err = sx150x_init_io(chip,
- chip->dev_cfg->pri.x456.reg_pld_mode,
- 0);
- if (err < 0)
- return err;
- } else {
- /* Set all pins to work in normal mode */
- err = sx150x_init_io(chip,
- chip->dev_cfg->pri.x123.reg_pld_mode,
- 0);
- if (err < 0)
- return err;
- }
-
-
- if (pdata->oscio_is_gpo)
- sx150x_set_oscio(chip, 0);
-
- return err;
-}
-
-static int sx150x_install_irq_chip(struct sx150x_chip *chip,
- int irq_summary,
- int irq_base)
-{
- int err;
-
- chip->irq_summary = irq_summary;
- chip->irq_base = irq_base;
-
- /* Add gpio chip to irq subsystem */
- err = gpiochip_irqchip_add(&chip->gpio_chip,
- &chip->irq_chip, chip->irq_base,
- handle_edge_irq, IRQ_TYPE_EDGE_BOTH);
- if (err) {
- dev_err(&chip->client->dev,
- "could not connect irqchip to gpiochip\n");
- return err;
- }
-
- err = devm_request_threaded_irq(&chip->client->dev,
- irq_summary, NULL, sx150x_irq_thread_fn,
- IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING,
- chip->irq_chip.name, chip);
- if (err < 0) {
- chip->irq_summary = -1;
- chip->irq_base = -1;
- }
-
- return err;
-}
-
-static int sx150x_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WRITE_WORD_DATA;
- struct sx150x_platform_data *pdata;
- struct sx150x_chip *chip;
- int rc;
-
- pdata = dev_get_platdata(&client->dev);
- if (!pdata)
- return -EINVAL;
-
- if (!i2c_check_functionality(client->adapter, i2c_funcs))
- return -ENOSYS;
-
- chip = devm_kzalloc(&client->dev,
- sizeof(struct sx150x_chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- sx150x_init_chip(chip, client, id->driver_data, pdata);
- rc = sx150x_init_hw(chip, pdata);
- if (rc < 0)
- return rc;
-
- rc = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
- if (rc)
- return rc;
-
- if (pdata->irq_summary >= 0) {
- rc = sx150x_install_irq_chip(chip,
- pdata->irq_summary,
- pdata->irq_base);
- if (rc < 0)
- return rc;
- }
-
- i2c_set_clientdata(client, chip);
-
- return 0;
-}
-
-static struct i2c_driver sx150x_driver = {
- .driver = {
- .name = "sx150x",
- .of_match_table = of_match_ptr(sx150x_of_match),
- },
- .probe = sx150x_probe,
- .id_table = sx150x_id,
-};
-
-static int __init sx150x_init(void)
-{
- return i2c_add_driver(&sx150x_driver);
-}
-subsys_initcall(sx150x_init);
OpenPOWER on IntegriCloud