diff options
Diffstat (limited to 'drivers/firewire')
| -rw-r--r-- | drivers/firewire/ohci.c | 20 |
1 files changed, 18 insertions, 2 deletions
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index a309d89..77a64bf 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -284,6 +284,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME; #define QUIRK_NO_MSI 16 #define QUIRK_TI_SLLZ059 32 #define QUIRK_IR_WAKE 64 +#define QUIRK_PHY_LCTRL_TIMEOUT 128 /* In case of multiple matches in ohci_quirks[], only the first one is used. */ static const struct { @@ -296,7 +297,10 @@ static const struct { QUIRK_BE_HEADERS}, {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6, - QUIRK_NO_MSI}, + QUIRK_PHY_LCTRL_TIMEOUT | QUIRK_NO_MSI}, + + {PCI_VENDOR_ID_ATT, PCI_ANY_ID, PCI_ANY_ID, + QUIRK_PHY_LCTRL_TIMEOUT}, {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID, QUIRK_RESET_PACKET}, @@ -343,6 +347,7 @@ MODULE_PARM_DESC(quirks, "Chip quirks (default = 0" ", disable MSI = " __stringify(QUIRK_NO_MSI) ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059) ", IR wake unreliable = " __stringify(QUIRK_IR_WAKE) + ", phy LCtrl timeout = " __stringify(QUIRK_PHY_LCTRL_TIMEOUT) ")"); #define OHCI_PARAM_DEBUG_AT_AR 1 @@ -2293,14 +2298,25 @@ static int ohci_enable(struct fw_card *card, * will lock up the machine. Wait 50msec to make sure we have * full link enabled. However, with some cards (well, at least * a JMicron PCIe card), we have to try again sometimes. + * + * TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but + * cannot actually use the phy at that time. These need tens of + * millisecods pause between LPS write and first phy access too. + * + * But do not wait for 50msec on Agere/LSI cards. Their phy + * arbitration state machine may time out during such a long wait. */ + reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS | OHCI1394_HCControl_postedWriteEnable); flush_writes(ohci); - for (lps = 0, i = 0; !lps && i < 3; i++) { + if (!(ohci->quirks & QUIRK_PHY_LCTRL_TIMEOUT)) msleep(50); + + for (lps = 0, i = 0; !lps && i < 150; i++) { + msleep(1); lps = reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_LPS; } |
