diff options
Diffstat (limited to 'drivers/firewire/fw-ohci.c')
-rw-r--r-- | drivers/firewire/fw-ohci.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 973e762..e88260b 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1390,6 +1390,8 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) { struct fw_ohci *ohci = fw_ohci(card); struct pci_dev *dev = to_pci_dev(card->device); + u32 lps; + int i; if (software_reset(ohci)) { fw_error("Failed to reset ohci card.\n"); @@ -1401,13 +1403,24 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) * most of the registers. In fact, on some cards (ALI M5251), * accessing registers in the SClk domain without LPS enabled * will lock up the machine. Wait 50msec to make sure we have - * full link enabled. + * full link enabled. However, with some cards (well, at least + * a JMicron PCIe card), we have to try again sometimes. */ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS | OHCI1394_HCControl_postedWriteEnable); flush_writes(ohci); - msleep(50); + + for (lps = 0, i = 0; !lps && i < 3; i++) { + msleep(50); + lps = reg_read(ohci, OHCI1394_HCControlSet) & + OHCI1394_HCControl_LPS; + } + + if (!lps) { + fw_error("Failed to set Link Power Status\n"); + return -EIO; + } reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); |