summaryrefslogtreecommitdiffstats
path: root/drivers/extcon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/extcon')
-rw-r--r--drivers/extcon/Kconfig28
-rw-r--r--drivers/extcon/Makefile6
-rw-r--r--drivers/extcon/extcon-adc-jack.c1
-rw-r--r--drivers/extcon/extcon-arizona.c68
-rw-r--r--drivers/extcon/extcon-class.c2
-rw-r--r--drivers/extcon/extcon-gpio.c1
-rw-r--r--drivers/extcon/extcon-max77693.c1
-rw-r--r--drivers/extcon/extcon-max8997.c1
-rw-r--r--drivers/extcon/extcon-palmas.c3
9 files changed, 63 insertions, 48 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index aebde48..9125eba 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -14,6 +14,20 @@ if EXTCON
comment "Extcon Device Drivers"
+config EXTCON_ADC_JACK
+ tristate "ADC Jack extcon support"
+ depends on IIO
+ help
+ Say Y here to enable extcon device driver based on ADC values.
+
+config EXTCON_ARIZONA
+ tristate "Wolfson Arizona EXTCON support"
+ depends on MFD_ARIZONA && INPUT && SND_SOC
+ help
+ Say Y here to enable support for external accessory detection
+ with Wolfson Arizona devices. These are audio CODECs with
+ advanced audio accessory detection support.
+
config EXTCON_GPIO
tristate "GPIO extcon support"
depends on GPIOLIB
@@ -21,12 +35,6 @@ config EXTCON_GPIO
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
-config EXTCON_ADC_JACK
- tristate "ADC Jack extcon support"
- depends on IIO
- help
- Say Y here to enable extcon device driver based on ADC values.
-
config EXTCON_MAX14577
tristate "MAX14577/77836 EXTCON Support"
depends on MFD_MAX14577
@@ -55,14 +63,6 @@ config EXTCON_MAX8997
Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
detector and switch.
-config EXTCON_ARIZONA
- tristate "Wolfson Arizona EXTCON support"
- depends on MFD_ARIZONA && INPUT && SND_SOC
- help
- Say Y here to enable support for external accessory detection
- with Wolfson Arizona devices. These are audio CODECs with
- advanced audio accessory detection support.
-
config EXTCON_PALMAS
tristate "Palmas USB EXTCON support"
depends on MFD_PALMAS
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index bf7861e..e48abc6 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -1,12 +1,12 @@
-#
+
# Makefile for external connector class (extcon) devices
#
obj-$(CONFIG_EXTCON) += extcon-class.o
-obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
+obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
+obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
-obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index e18f95b..d860229 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -112,7 +112,6 @@ static int adc_jack_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
- data->edev->dev.parent = &pdev->dev;
data->edev->name = pdata->name;
/* Check the length of array and set num_cables */
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 6c84e3d..0b1ee9f 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -39,6 +39,11 @@
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
+#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4
+#define ARIZONA_MICD_CLAMP_MODE_JDH 0x5
+#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
+#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb
+
#define ARIZONA_HPDET_MAX 10000
#define HPDET_DEBOUNCE 500
@@ -324,14 +329,17 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
}
static struct {
+ unsigned int threshold;
unsigned int factor_a;
unsigned int factor_b;
} arizona_hpdet_b_ranges[] = {
- { 5528, 362464 },
- { 11084, 6186851 },
- { 11065, 65460395 },
+ { 100, 5528, 362464 },
+ { 169, 11084, 6186851 },
+ { 169, 11065, 65460395 },
};
+#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb
+
static struct {
int min;
int max;
@@ -386,7 +394,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
- (val < 100 || val >= 0x3fb)) {
+ (val < arizona_hpdet_b_ranges[range].threshold ||
+ val >= ARIZONA_HPDET_B_RANGE_MAX)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
range);
@@ -399,7 +408,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
}
/* If we go out of range report top of range */
- if (val < 100 || val >= 0x3fb) {
+ if (val < arizona_hpdet_b_ranges[range].threshold ||
+ val >= ARIZONA_HPDET_B_RANGE_MAX) {
dev_dbg(arizona->dev, "Measurement out of range\n");
return ARIZONA_HPDET_MAX;
}
@@ -664,9 +674,8 @@ err:
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_update_state(info->edev,
- 1 << ARIZONA_CABLE_HEADPHONE,
- 1 << ARIZONA_CABLE_HEADPHONE);
+ ret = extcon_set_cable_state_(info->edev,
+ ARIZONA_CABLE_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -723,9 +732,8 @@ err:
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_update_state(info->edev,
- 1 << ARIZONA_CABLE_HEADPHONE,
- 1 << ARIZONA_CABLE_HEADPHONE);
+ ret = extcon_set_cable_state_(info->edev,
+ ARIZONA_CABLE_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -812,16 +820,15 @@ static void arizona_micd_detect(struct work_struct *work)
if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
arizona_identify_headphone(info);
- ret = extcon_update_state(info->edev,
- 1 << ARIZONA_CABLE_MICROPHONE,
- 1 << ARIZONA_CABLE_MICROPHONE);
+ ret = extcon_set_cable_state_(info->edev,
+ ARIZONA_CABLE_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
/* Don't need to regulate for button detection */
- ret = regulator_allow_bypass(info->micvdd, false);
+ ret = regulator_allow_bypass(info->micvdd, true);
if (ret != 0) {
dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
ret);
@@ -962,10 +969,16 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
if (arizona->pdata.jd_gpio5) {
mask = ARIZONA_MICD_CLAMP_STS;
- present = 0;
+ if (arizona->pdata.jd_invert)
+ present = ARIZONA_MICD_CLAMP_STS;
+ else
+ present = 0;
} else {
mask = ARIZONA_JD1_STS;
- present = ARIZONA_JD1_STS;
+ if (arizona->pdata.jd_invert)
+ present = 0;
+ else
+ present = ARIZONA_JD1_STS;
}
ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
@@ -1096,6 +1109,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_extcon_info *info;
unsigned int val;
+ unsigned int clamp_mode;
int jack_irq_fall, jack_irq_rise;
int ret, mode, i, j;
@@ -1156,7 +1170,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
return -ENOMEM;
}
info->edev->name = "Headset Jack";
- info->edev->dev.parent = arizona->dev;
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret < 0) {
@@ -1174,7 +1187,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
info->input->name = "Headset";
info->input->phys = "arizona/extcon";
- info->input->dev.parent = &pdev->dev;
if (pdata->num_micd_configs) {
info->micd_modes = pdata->micd_configs;
@@ -1305,16 +1317,22 @@ static int arizona_extcon_probe(struct platform_device *pdev)
regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
val);
- regmap_update_bits(arizona->regmap,
- ARIZONA_MICD_CLAMP_CONTROL,
- ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
+ if (arizona->pdata.jd_invert)
+ clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H;
+ else
+ clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H;
} else {
- regmap_update_bits(arizona->regmap,
- ARIZONA_MICD_CLAMP_CONTROL,
- ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
+ if (arizona->pdata.jd_invert)
+ clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH;
+ else
+ clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL;
}
regmap_update_bits(arizona->regmap,
+ ARIZONA_MICD_CLAMP_CONTROL,
+ ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
+
+ regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
ARIZONA_MICD_CLAMP_DB,
ARIZONA_MICD_CLAMP_DB);
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 18d42c0..4c2f2c5 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -645,6 +645,8 @@ struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
return edev;
}
+ edev->dev.parent = dev;
+
*ptr = edev;
devres_add(dev, ptr);
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 645b283..5b7ec27 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -105,7 +105,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
return -ENOMEM;
}
extcon_data->edev->name = pdata->name;
- extcon_data->edev->dev.parent = &pdev->dev;
extcon_data->gpio = pdata->gpio;
extcon_data->gpio_active_low = pdata->gpio_active_low;
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index c7278b1..042bf742 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -1184,7 +1184,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
goto err_irq;
}
info->edev->name = DEV_NAME;
- info->edev->dev.parent = &pdev->dev;
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index d9f7f1b..d22c379 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -706,7 +706,6 @@ static int max8997_muic_probe(struct platform_device *pdev)
goto err_irq;
}
info->edev->name = DEV_NAME;
- info->edev->dev.parent = &pdev->dev;
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 7417ce8..230e122 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -194,7 +194,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
return -ENOMEM;
}
palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL);
- palmas_usb->edev->dev.parent = palmas_usb->dev;
palmas_usb->edev->mutually_exclusive = mutually_exclusive;
status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev);
@@ -278,7 +277,7 @@ static int palmas_usb_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(palmas_pm_ops, palmas_usb_suspend, palmas_usb_resume);
-static struct of_device_id of_palmas_match_tbl[] = {
+static const struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas-usb", },
{ .compatible = "ti,palmas-usb-vid", },
{ .compatible = "ti,twl6035-usb", },
OpenPOWER on IntegriCloud