summaryrefslogtreecommitdiffstats
path: root/drivers/dma
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/ste_dma40.c72
-rw-r--r--drivers/dma/ste_dma40_ll.h3
2 files changed, 26 insertions, 49 deletions
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 35b078d..2797f64 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/amba/bus.h>
#include <plat/ste_dma40.h>
@@ -44,9 +45,6 @@
#define D40_ALLOC_PHY (1 << 30)
#define D40_ALLOC_LOG_FREE 0
-/* Hardware designer of the block */
-#define D40_HW_DESIGNER 0x8
-
/**
* enum 40_command - The different commands and/or statuses.
*
@@ -2525,25 +2523,6 @@ static int __init d40_phy_res_init(struct d40_base *base)
static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
{
- static const struct d40_reg_val dma_id_regs[] = {
- /* Peripheral Id */
- { .reg = D40_DREG_PERIPHID0, .val = 0x0040},
- { .reg = D40_DREG_PERIPHID1, .val = 0x0000},
- /*
- * D40_DREG_PERIPHID2 Depends on HW revision:
- * DB8500ed has 0x0008,
- * ? has 0x0018,
- * DB8500v1 has 0x0028
- * DB8500v2 has 0x0038
- */
- { .reg = D40_DREG_PERIPHID3, .val = 0x0000},
-
- /* PCell Id */
- { .reg = D40_DREG_CELLID0, .val = 0x000d},
- { .reg = D40_DREG_CELLID1, .val = 0x00f0},
- { .reg = D40_DREG_CELLID2, .val = 0x0005},
- { .reg = D40_DREG_CELLID3, .val = 0x00b1}
- };
struct stedma40_platform_data *plat_data;
struct clk *clk = NULL;
void __iomem *virtbase = NULL;
@@ -2552,8 +2531,9 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
int num_log_chans = 0;
int num_phy_chans;
int i;
- u32 val;
- u32 rev;
+ u32 pid;
+ u32 cid;
+ u8 rev;
clk = clk_get(&pdev->dev, NULL);
@@ -2577,32 +2557,32 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
if (!virtbase)
goto failure;
- /* HW version check */
- for (i = 0; i < ARRAY_SIZE(dma_id_regs); i++) {
- if (dma_id_regs[i].val !=
- readl(virtbase + dma_id_regs[i].reg)) {
- d40_err(&pdev->dev,
- "Unknown hardware! Expected 0x%x at 0x%x but got 0x%x\n",
- dma_id_regs[i].val,
- dma_id_regs[i].reg,
- readl(virtbase + dma_id_regs[i].reg));
- goto failure;
- }
- }
-
- /* Get silicon revision and designer */
- val = readl(virtbase + D40_DREG_PERIPHID2);
+ /* This is just a regular AMBA PrimeCell ID actually */
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
+ & 255) << (i * 8);
+ for (cid = 0, i = 0; i < 4; i++)
+ cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
+ & 255) << (i * 8);
- if ((val & D40_DREG_PERIPHID2_DESIGNER_MASK) !=
- D40_HW_DESIGNER) {
+ if (cid != AMBA_CID) {
+ d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n");
+ goto failure;
+ }
+ if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n",
- val & D40_DREG_PERIPHID2_DESIGNER_MASK,
- D40_HW_DESIGNER);
+ AMBA_MANF_BITS(pid),
+ AMBA_VENDOR_ST);
goto failure;
}
-
- rev = (val & D40_DREG_PERIPHID2_REV_MASK) >>
- D40_DREG_PERIPHID2_REV_POS;
+ /*
+ * HW revision:
+ * DB8500ed has revision 0
+ * ? has revision 1
+ * DB8500v1 has revision 2
+ * DB8500v2 has revision 3
+ */
+ rev = AMBA_REV_BITS(pid);
/* The number of physical channels on this HW */
num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index 195ee65..b44c4551 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -184,9 +184,6 @@
#define D40_DREG_PERIPHID0 0xFE0
#define D40_DREG_PERIPHID1 0xFE4
#define D40_DREG_PERIPHID2 0xFE8
-#define D40_DREG_PERIPHID2_REV_POS 4
-#define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS)
-#define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf
#define D40_DREG_PERIPHID3 0xFEC
#define D40_DREG_CELLID0 0xFF0
#define D40_DREG_CELLID1 0xFF4
OpenPOWER on IntegriCloud