summaryrefslogtreecommitdiffstats
path: root/drivers/dma/amba-pl08x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
-rw-r--r--drivers/dma/amba-pl08x.c640
1 files changed, 316 insertions, 324 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index be21e3f..b7cbd1a 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -66,32 +66,29 @@
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
* will then move to the next LLI entry.
*
- * Only the former works sanely with scatter lists, so we only implement
- * the DMAC flow control method. However, peripherals which use the LBREQ
- * and LSREQ signals (eg, MMCI) are unable to use this mode, which through
- * these hardware restrictions prevents them from using scatter DMA.
- *
* Global TODO:
* - Break out common code from arch/arm/mach-s3c64xx and share
*/
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
-
+#include <linux/slab.h>
#include <asm/hardware/pl080.h>
#define DRIVER_NAME "pl08xdmac"
+static struct amba_driver pl08x_amba_driver;
+
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
@@ -126,7 +123,8 @@ struct pl08x_lli {
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
- * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
+ * fetches
* @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
@@ -149,14 +147,6 @@ struct pl08x_driver_data {
* PL08X specific defines
*/
-/*
- * Memory boundaries: the manual for PL08x says that the controller
- * cannot read past a 1KiB boundary, so these defines are used to
- * create transfer LLIs that do not cross such boundaries.
- */
-#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */
-#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT)
-
/* Size (bytes) of each LLI buffer allocated for one transfer */
# define PL08X_LLI_TSFR_SIZE 0x2000
@@ -272,7 +262,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
writel(val, ch->base + PL080_CH_CONFIG);
}
-
/*
* pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
* clears any pending interrupt status. This should not be used for
@@ -363,7 +352,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *txdi;
list_for_each_entry(txdi, &plchan->pend_list, node) {
- bytes += txdi->len;
+ struct pl08x_sg *dsg;
+ list_for_each_entry(dsg, &txd->dsg_list, node)
+ bytes += dsg->len;
}
}
@@ -407,6 +398,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
return NULL;
}
+ pm_runtime_get_sync(&pl08x->adev->dev);
return ch;
}
@@ -420,6 +412,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
/* Stop the channel and clear its interrupts */
pl08x_terminate_phy_chan(pl08x, ch);
+ pm_runtime_put(&pl08x->adev->dev);
+
/* Mark it as free */
ch->serving = NULL;
spin_unlock_irqrestore(&ch->lock, flags);
@@ -499,36 +493,30 @@ struct pl08x_lli_build_data {
};
/*
- * Autoselect a master bus to use for the transfer this prefers the
- * destination bus if both available if fixed address on one bus the
- * other will be chosen
+ * Autoselect a master bus to use for the transfer. Slave will be the chosen as
+ * victim in case src & dest are not similarly aligned. i.e. If after aligning
+ * masters address with width requirements of transfer (by sending few byte by
+ * byte data), slave is still not aligned, then its width will be reduced to
+ * BYTE.
+ * - prefers the destination bus if both available
+ * - prefers bus with fixed address (i.e. peripheral)
*/
static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
{
if (!(cctl & PL080_CONTROL_DST_INCR)) {
- *mbus = &bd->srcbus;
- *sbus = &bd->dstbus;
- } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
+ } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
} else {
- if (bd->dstbus.buswidth == 4) {
+ if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
- } else if (bd->srcbus.buswidth == 4) {
- *mbus = &bd->srcbus;
- *sbus = &bd->dstbus;
- } else if (bd->dstbus.buswidth == 2) {
- *mbus = &bd->dstbus;
- *sbus = &bd->srcbus;
- } else if (bd->srcbus.buswidth == 2) {
+ } else {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
- } else {
- /* bd->srcbus.buswidth == 1 */
- *mbus = &bd->dstbus;
- *sbus = &bd->srcbus;
}
}
}
@@ -547,7 +535,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
llis_va[num_llis].cctl = cctl;
llis_va[num_llis].src = bd->srcbus.addr;
llis_va[num_llis].dst = bd->dstbus.addr;
- llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+ llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
+ sizeof(struct pl08x_lli);
llis_va[num_llis].lli |= bd->lli_bus;
if (cctl & PL080_CONTROL_SRC_INCR)
@@ -560,16 +549,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
bd->remainder -= len;
}
-/*
- * Return number of bytes to fill to boundary, or len.
- * This calculation works for any value of addr.
- */
-static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
+static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
+ u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
{
- size_t boundary_len = PL08X_BOUNDARY_SIZE -
- (addr & (PL08X_BOUNDARY_SIZE - 1));
-
- return min(boundary_len, len);
+ *cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+ pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
+ (*total_bytes) += len;
}
/*
@@ -583,13 +568,12 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_bus_data *mbus, *sbus;
struct pl08x_lli_build_data bd;
int num_llis = 0;
- u32 cctl;
- size_t max_bytes_per_lli;
- size_t total_bytes = 0;
+ u32 cctl, early_bytes = 0;
+ size_t max_bytes_per_lli, total_bytes;
struct pl08x_lli *llis_va;
+ struct pl08x_sg *dsg;
- txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
- &txd->llis_bus);
+ txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
if (!txd->llis_va) {
dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
return 0;
@@ -597,13 +581,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
pl08x->pool_ctr++;
- /* Get the default CCTL */
- cctl = txd->cctl;
-
bd.txd = txd;
- bd.srcbus.addr = txd->src_addr;
- bd.dstbus.addr = txd->dst_addr;
bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
+ cctl = txd->cctl;
/* Find maximum width of the source bus */
bd.srcbus.maxwidth =
@@ -615,215 +595,179 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
PL080_CONTROL_DWIDTH_SHIFT);
- /* Set up the bus widths to the maximum */
- bd.srcbus.buswidth = bd.srcbus.maxwidth;
- bd.dstbus.buswidth = bd.dstbus.maxwidth;
+ list_for_each_entry(dsg, &txd->dsg_list, node) {
+ total_bytes = 0;
+ cctl = txd->cctl;
- /*
- * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
- */
- max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
- PL080_CONTROL_TRANSFER_SIZE_MASK;
+ bd.srcbus.addr = dsg->src_addr;
+ bd.dstbus.addr = dsg->dst_addr;
+ bd.remainder = dsg->len;
+ bd.srcbus.buswidth = bd.srcbus.maxwidth;
+ bd.dstbus.buswidth = bd.dstbus.maxwidth;
- /* We need to count this down to zero */
- bd.remainder = txd->len;
+ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
- /*
- * Choose bus to align to
- * - prefers destination bus if both available
- * - if fixed address on one bus chooses other
- */
- pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
-
- dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
- bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
- bd.srcbus.buswidth,
- bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
- bd.dstbus.buswidth,
- bd.remainder, max_bytes_per_lli);
- dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
- mbus == &bd.srcbus ? "src" : "dst",
- sbus == &bd.srcbus ? "src" : "dst");
-
- if (txd->len < mbus->buswidth) {
- /* Less than a bus width available - send as single bytes */
- while (bd.remainder) {
- dev_vdbg(&pl08x->adev->dev,
- "%s single byte LLIs for a transfer of "
- "less than a bus width (remain 0x%08x)\n",
- __func__, bd.remainder);
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
- }
- } else {
- /* Make one byte LLIs until master bus is aligned */
- while ((mbus->addr) % (mbus->buswidth)) {
- dev_vdbg(&pl08x->adev->dev,
- "%s adjustment lli for less than bus width "
- "(remain 0x%08x)\n",
- __func__, bd.remainder);
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
- }
+ dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
+ bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+ bd.srcbus.buswidth,
+ bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+ bd.dstbus.buswidth,
+ bd.remainder);
+ dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
+ mbus == &bd.srcbus ? "src" : "dst",
+ sbus == &bd.srcbus ? "src" : "dst");
/*
- * Master now aligned
- * - if slave is not then we must set its width down
+ * Zero length is only allowed if all these requirements are
+ * met:
+ * - flow controller is peripheral.
+ * - src.addr is aligned to src.width
+ * - dst.addr is aligned to dst.width
+ *
+ * sg_len == 1 should be true, as there can be two cases here:
+ *
+ * - Memory addresses are contiguous and are not scattered.
+ * Here, Only one sg will be passed by user driver, with
+ * memory address and zero length. We pass this to controller
+ * and after the transfer it will receive the last burst
+ * request from peripheral and so transfer finishes.
+ *
+ * - Memory addresses are scattered and are not contiguous.
+ * Here, Obviously as DMA controller doesn't know when a lli's
+ * transfer gets over, it can't load next lli. So in this
+ * case, there has to be an assumption that only one lli is
+ * supported. Thus, we can't have scattered addresses.
*/
- if (sbus->addr % sbus->buswidth) {
- dev_dbg(&pl08x->adev->dev,
- "%s set down bus width to one byte\n",
- __func__);
+ if (!bd.remainder) {
+ u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+ PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
+ (fc <= PL080_FLOW_SRC2DST_SRC))) {
+ dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
+ __func__);
+ return 0;
+ }
+
+ if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
+ (bd.srcbus.addr % bd.srcbus.buswidth)) {
+ dev_err(&pl08x->adev->dev,
+ "%s src & dst address must be aligned to src"
+ " & dst width if peripheral is flow controller",
+ __func__);
+ return 0;
+ }
- sbus->buswidth = 1;
+ cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+ bd.dstbus.buswidth, 0);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
+ break;
}
/*
- * Make largest possible LLIs until less than one bus
- * width left
+ * Send byte by byte for following cases
+ * - Less than a bus width available
+ * - until master bus is aligned
*/
- while (bd.remainder > (mbus->buswidth - 1)) {
- size_t lli_len, target_len, tsize, odd_bytes;
+ if (bd.remainder < mbus->buswidth)
+ early_bytes = bd.remainder;
+ else if ((mbus->addr) % (mbus->buswidth)) {
+ early_bytes = mbus->buswidth - (mbus->addr) %
+ (mbus->buswidth);
+ if ((bd.remainder - early_bytes) < mbus->buswidth)
+ early_bytes = bd.remainder;
+ }
+ if (early_bytes) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%s byte width LLIs (remain 0x%08x)\n",
+ __func__, bd.remainder);
+ prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
+ &total_bytes);
+ }
+
+ if (bd.remainder) {
/*
- * If enough left try to send max possible,
- * otherwise try to send the remainder
+ * Master now aligned
+ * - if slave is not then we must set its width down
*/
- target_len = min(bd.remainder, max_bytes_per_lli);
+ if (sbus->addr % sbus->buswidth) {
+ dev_dbg(&pl08x->adev->dev,
+ "%s set down bus width to one byte\n",
+ __func__);
+
+ sbus->buswidth = 1;
+ }
/*
- * Set bus lengths for incrementing buses to the
- * number of bytes which fill to next memory boundary,
- * limiting on the target length calculated above.
+ * Bytes transferred = tsize * src width, not
+ * MIN(buswidths)
*/
- if (cctl & PL080_CONTROL_SRC_INCR)
- bd.srcbus.fill_bytes =
- pl08x_pre_boundary(bd.srcbus.addr,
- target_len);
- else
- bd.srcbus.fill_bytes = target_len;
-
- if (cctl & PL080_CONTROL_DST_INCR)
- bd.dstbus.fill_bytes =
- pl08x_pre_boundary(bd.dstbus.addr,
- target_len);
- else
- bd.dstbus.fill_bytes = target_len;
-
- /* Find the nearest */
- lli_len = min(bd.srcbus.fill_bytes,
- bd.dstbus.fill_bytes);
-
- BUG_ON(lli_len > bd.remainder);
-
- if (lli_len <= 0) {
- dev_err(&pl08x->adev->dev,
- "%s lli_len is %zu, <= 0\n",
- __func__, lli_len);
- return 0;
- }
+ max_bytes_per_lli = bd.srcbus.buswidth *
+ PL080_CONTROL_TRANSFER_SIZE_MASK;
+ dev_vdbg(&pl08x->adev->dev,
+ "%s max bytes per lli = %zu\n",
+ __func__, max_bytes_per_lli);
+
+ /*
+ * Make largest possible LLIs until less than one bus
+ * width left
+ */
+ while (bd.remainder > (mbus->buswidth - 1)) {
+ size_t lli_len, tsize, width;
- if (lli_len == target_len) {
- /*
- * Can send what we wanted.
- * Maintain alignment
- */
- lli_len = (lli_len/mbus->buswidth) *
- mbus->buswidth;
- odd_bytes = 0;
- } else {
/*
- * So now we know how many bytes to transfer
- * to get to the nearest boundary. The next
- * LLI will past the boundary. However, we
- * may be working to a boundary on the slave
- * bus. We need to ensure the master stays
- * aligned, and that we are working in
- * multiples of the bus widths.
+ * If enough left try to send max possible,
+ * otherwise try to send the remainder
*/
- odd_bytes = lli_len % mbus->buswidth;
- lli_len -= odd_bytes;
-
- }
+ lli_len = min(bd.remainder, max_bytes_per_lli);
- if (lli_len) {
/*
- * Check against minimum bus alignment:
- * Calculate actual transfer size in relation
- * to bus width an get a maximum remainder of
- * the smallest bus width - 1
+ * Check against maximum bus alignment:
+ * Calculate actual transfer size in relation to
+ * bus width an get a maximum remainder of the
+ * highest bus width - 1
*/
- /* FIXME: use round_down()? */
- tsize = lli_len / min(mbus->buswidth,
- sbus->buswidth);
- lli_len = tsize * min(mbus->buswidth,
- sbus->buswidth);
-
- if (target_len != lli_len) {
- dev_vdbg(&pl08x->adev->dev,
- "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
- __func__, target_len, lli_len, txd->len);
- }
-
- cctl = pl08x_cctl_bits(cctl,
- bd.srcbus.buswidth,
- bd.dstbus.buswidth,
- tsize);
+ width = max(mbus->buswidth, sbus->buswidth);
+ lli_len = (lli_len / width) * width;
+ tsize = lli_len / bd.srcbus.buswidth;
dev_vdbg(&pl08x->adev->dev,
- "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
+ "%s fill lli with single lli chunk of "
+ "size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, bd.remainder);
+
+ cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+ bd.dstbus.buswidth, tsize);
pl08x_fill_lli_for_desc(&bd, num_llis++,
- lli_len, cctl);
+ lli_len, cctl);
total_bytes += lli_len;
}
-
- if (odd_bytes) {
- /*
- * Creep past the boundary, maintaining
- * master alignment
- */
- int j;
- for (j = 0; (j < mbus->buswidth)
- && (bd.remainder); j++) {
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single byte (remain 0x%08zx)\n",
- __func__, bd.remainder);
- pl08x_fill_lli_for_desc(&bd,
- num_llis++, 1, cctl);
- total_bytes++;
- }
+ /*
+ * Send any odd bytes
+ */
+ if (bd.remainder) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%s align with boundary, send odd bytes (remain %zu)\n",
+ __func__, bd.remainder);
+ prep_byte_width_lli(&bd, &cctl, bd.remainder,
+ num_llis++, &total_bytes);
}
}
- /*
- * Send any odd bytes
- */
- while (bd.remainder) {
- cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- dev_vdbg(&pl08x->adev->dev,
- "%s align with boundary, single odd byte (remain %zu)\n",
- __func__, bd.remainder);
- pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
- total_bytes++;
+ if (total_bytes != dsg->len) {
+ dev_err(&pl08x->adev->dev,
+ "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
+ __func__, total_bytes, dsg->len);
+ return 0;
}
- }
- if (total_bytes != txd->len) {
- dev_err(&pl08x->adev->dev,
- "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
- __func__, total_bytes, txd->len);
- return 0;
- }
- if (num_llis >= MAX_NUM_TSFR_LLIS) {
- dev_err(&pl08x->adev->dev,
- "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
- __func__, (u32) MAX_NUM_TSFR_LLIS);
- return 0;
+ if (num_llis >= MAX_NUM_TSFR_LLIS) {
+ dev_err(&pl08x->adev->dev,
+ "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
+ __func__, (u32) MAX_NUM_TSFR_LLIS);
+ return 0;
+ }
}
llis_va = txd->llis_va;
@@ -856,11 +800,19 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
+ struct pl08x_sg *dsg, *_dsg;
+
/* Free the LLI */
- dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
+ if (txd->llis_va)
+ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
pl08x->pool_ctr--;
+ list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+ list_del(&dsg->node);
+ kfree(dsg);
+ }
+
kfree(txd);
}
@@ -917,9 +869,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
* need, but for slaves the physical signals may be muxed!
* Can the platform allow us to use this channel?
*/
- if (plchan->slave &&
- ch->signal < 0 &&
- pl08x->pd->get_signal) {
+ if (plchan->slave && pl08x->pd->get_signal) {
ret = pl08x->pd->get_signal(plchan);
if (ret < 0) {
dev_dbg(&pl08x->adev->dev,
@@ -1008,10 +958,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
* If slaves are relying on interrupts to signal completion this function
* must not be called with interrupts disabled.
*/
-static enum dma_status
-pl08x_dma_tx_status(struct dma_chan *chan,
- dma_cookie_t cookie,
- struct dma_tx_state *txstate)
+static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
dma_cookie_t last_used;
@@ -1253,7 +1201,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
if (!num_llis) {
- kfree(txd);
+ spin_lock_irqsave(&plchan->lock, flags);
+ pl08x_free_txd(pl08x, txd);
+ spin_unlock_irqrestore(&plchan->lock, flags);
return -EINVAL;
}
@@ -1301,13 +1251,14 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
- struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (txd) {
dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
txd->tx.flags = flags;
txd->tx.tx_submit = pl08x_tx_submit;
INIT_LIST_HEAD(&txd->node);
+ INIT_LIST_HEAD(&txd->dsg_list);
/* Always enable error and terminal interrupts */
txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
@@ -1326,6 +1277,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
+ struct pl08x_sg *dsg;
int ret;
txd = pl08x_get_txd(plchan, flags);
@@ -1335,10 +1287,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
return NULL;
}
+ dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+ if (!dsg) {
+ pl08x_free_txd(pl08x, txd);
+ dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n",
+ __func__);
+ return NULL;
+ }
+ list_add_tail(&dsg->node, &txd->dsg_list);
+
txd->direction = DMA_NONE;
- txd->src_addr = src;
- txd->dst_addr = dest;
- txd->len = len;
+ dsg->src_addr = src;
+ dsg->dst_addr = dest;
+ dsg->len = len;
/* Set platform data for m2m */
txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
@@ -1367,19 +1328,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
- int ret;
-
- /*
- * Current implementation ASSUMES only one sg
- */
- if (sg_len != 1) {
- dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n",
- __func__);
- BUG();
- }
+ struct pl08x_sg *dsg;
+ struct scatterlist *sg;
+ dma_addr_t slave_addr;
+ int ret, tmp;
dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
- __func__, sgl->length, plchan->name);
+ __func__, sgl->length, plchan->name);
txd = pl08x_get_txd(plchan, flags);
if (!txd) {
@@ -1398,24 +1353,49 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
* channel target address dynamically at runtime.
*/
txd->direction = direction;
- txd->len = sgl->length;
if (direction == DMA_TO_DEVICE) {
- txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->dst_cctl;
- txd->src_addr = sgl->dma_address;
- txd->dst_addr = plchan->dst_addr;
+ slave_addr = plchan->dst_addr;
} else if (direction == DMA_FROM_DEVICE) {
- txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->src_cctl;
- txd->src_addr = plchan->src_addr;
- txd->dst_addr = sgl->dma_address;
+ slave_addr = plchan->src_addr;
} else {
+ pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
+ if (plchan->cd->device_fc)
+ tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+ PL080_FLOW_PER2MEM_PER;
+ else
+ tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+ PL080_FLOW_PER2MEM;
+
+ txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+
+ for_each_sg(sgl, sg, sg_len, tmp) {
+ dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+ if (!dsg) {
+ pl08x_free_txd(pl08x, txd);
+ dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
+ __func__);
+ return NULL;
+ }
+ list_add_tail(&dsg->node, &txd->dsg_list);
+
+ dsg->len = sg_dma_len(sg);
+ if (direction == DMA_TO_DEVICE) {
+ dsg->src_addr = sg_phys(sg);
+ dsg->dst_addr = slave_addr;
+ } else {
+ dsg->src_addr = slave_addr;
+ dsg->dst_addr = sg_phys(sg);
+ }
+ }
+
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
@@ -1489,9 +1469,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
{
- struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_dma_chan *plchan;
char *name = chan_id;
+ /* Reject channels for devices not bound to this driver */
+ if (chan->device->dev->driver != &pl08x_amba_driver.drv)
+ return false;
+
+ plchan = to_pl08x_chan(chan);
+
/* Check that the channel is not taken! */
if (!strcmp(plchan->name, name))
return true;
@@ -1507,34 +1493,34 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
- u32 val;
-
- val = readl(pl08x->base + PL080_CONFIG);
- val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
- /* We implicitly clear bit 1 and that means little-endian mode */
- val |= PL080_CONFIG_ENABLE;
- writel(val, pl08x->base + PL080_CONFIG);
+ writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
}
static void pl08x_unmap_buffers(struct pl08x_txd *txd)
{
struct device *dev = txd->tx.chan->device->dev;
+ struct pl08x_sg *dsg;
if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- dma_unmap_single(dev, txd->src_addr, txd->len,
- DMA_TO_DEVICE);
- else
- dma_unmap_page(dev, txd->src_addr, txd->len,
- DMA_TO_DEVICE);
+ list_for_each_entry(dsg, &txd->dsg_list, node)
+ dma_unmap_single(dev, dsg->src_addr, dsg->len,
+ DMA_TO_DEVICE);
+ else {
+ list_for_each_entry(dsg, &txd->dsg_list, node)
+ dma_unmap_page(dev, dsg->src_addr, dsg->len,
+ DMA_TO_DEVICE);
+ }
}
if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- dma_unmap_single(dev, txd->dst_addr, txd->len,
- DMA_FROM_DEVICE);
+ list_for_each_entry(dsg, &txd->dsg_list, node)
+ dma_unmap_single(dev, dsg->dst_addr, dsg->len,
+ DMA_FROM_DEVICE);
else
- dma_unmap_page(dev, txd->dst_addr, txd->len,
- DMA_FROM_DEVICE);
+ list_for_each_entry(dsg, &txd->dsg_list, node)
+ dma_unmap_page(dev, dsg->dst_addr, dsg->len,
+ DMA_FROM_DEVICE);
}
}
@@ -1589,8 +1575,8 @@ static void pl08x_tasklet(unsigned long data)
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
- if (waiting->state == PL08X_CHAN_WAITING &&
- waiting->waiting != NULL) {
+ if (waiting->state == PL08X_CHAN_WAITING &&
+ waiting->waiting != NULL) {
int ret;
/* This should REALLY not fail now */
@@ -1630,38 +1616,40 @@ static void pl08x_tasklet(unsigned long data)
static irqreturn_t pl08x_irq(int irq, void *dev)
{
struct pl08x_driver_data *pl08x = dev;
- u32 mask = 0;
- u32 val;
- int i;
-
- val = readl(pl08x->base + PL080_ERR_STATUS);
- if (val) {
- /* An error interrupt (on one or more channels) */
- dev_err(&pl08x->adev->dev,
- "%s error interrupt, register value 0x%08x\n",
- __func__, val);
- /*
- * Simply clear ALL PL08X error interrupts,
- * regardless of channel and cause
- * FIXME: should be 0x00000003 on PL081 really.
- */
- writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+ u32 mask = 0, err, tc, i;
+
+ /* check & clear - ERR & TC interrupts */
+ err = readl(pl08x->base + PL080_ERR_STATUS);
+ if (err) {
+ dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
+ __func__, err);
+ writel(err, pl08x->base + PL080_ERR_CLEAR);
}
- val = readl(pl08x->base + PL080_INT_STATUS);
+ tc = readl(pl08x->base + PL080_INT_STATUS);
+ if (tc)
+ writel(tc, pl08x->base + PL080_TC_CLEAR);
+
+ if (!err && !tc)
+ return IRQ_NONE;
+
for (i = 0; i < pl08x->vd->channels; i++) {
- if ((1 << i) & val) {
+ if (((1 << i) & err) || ((1 << i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
+ if (!plchan) {
+ dev_err(&pl08x->adev->dev,
+ "%s Error TC interrupt on unused channel: 0x%08x\n",
+ __func__, i);
+ continue;
+ }
+
/* Schedule tasklet on this channel */
tasklet_schedule(&plchan->tasklet);
-
mask |= (1 << i);
}
}
- /* Clear only the terminal interrupts on channels we processed */
- writel(mask, pl08x->base + PL080_TC_CLEAR);
return mask ? IRQ_HANDLED : IRQ_NONE;
}
@@ -1685,9 +1673,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
* Make a local wrapper to hold required data
*/
static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
- struct dma_device *dmadev,
- unsigned int channels,
- bool slave)
+ struct dma_device *dmadev, unsigned int channels, bool slave)
{
struct pl08x_dma_chan *chan;
int i;
@@ -1700,7 +1686,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
* to cope with that situation.
*/
for (i = 0; i < channels; i++) {
- chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
+ chan = kzalloc(sizeof(*chan), GFP_KERNEL);
if (!chan) {
dev_err(&pl08x->adev->dev,
"%s no memory for channel\n", __func__);
@@ -1728,7 +1714,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
kfree(chan);
continue;
}
- dev_info(&pl08x->adev->dev,
+ dev_dbg(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
@@ -1837,9 +1823,9 @@ static const struct file_operations pl08x_debugfs_operations = {
static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
{
/* Expose a simple debugfs interface to view all clocks */
- (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
- NULL, pl08x,
- &pl08x_debugfs_operations);
+ (void) debugfs_create_file(dev_name(&pl08x->adev->dev),
+ S_IFREG | S_IRUGO, NULL, pl08x,
+ &pl08x_debugfs_operations);
}
#else
@@ -1860,12 +1846,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
/* Create the driver state holder */
- pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
+ pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
if (!pl08x) {
ret = -ENOMEM;
goto out_no_pl08x;
}
+ pm_runtime_set_active(&adev->dev);
+ pm_runtime_enable(&adev->dev);
+
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
pl08x->memcpy.dev = &adev->dev;
@@ -1939,7 +1928,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
}
/* Initialize physical channels */
- pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
+ pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
GFP_KERNEL);
if (!pl08x->phy_chans) {
dev_err(&adev->dev, "%s failed to allocate "
@@ -1956,9 +1945,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&ch->lock);
ch->serving = NULL;
ch->signal = -1;
- dev_info(&adev->dev,
- "physical channel %d is %s\n", i,
- pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+ dev_dbg(&adev->dev, "physical channel %d is %s\n",
+ i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
}
/* Register as many memcpy channels as there are physical channels */
@@ -1974,8 +1962,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
/* Register slave channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
- pl08x->pd->num_slave_channels,
- true);
+ pl08x->pd->num_slave_channels, true);
if (ret <= 0) {
dev_warn(&pl08x->adev->dev,
"%s failed to enumerate slave channels - %d\n",
@@ -2005,6 +1992,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
amba_part(adev), amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
+
+ pm_runtime_put(&adev->dev);
return 0;
out_no_slave_reg:
@@ -2023,6 +2012,9 @@ out_no_ioremap:
dma_pool_destroy(pl08x->pool);
out_no_lli_pool:
out_no_platdata:
+ pm_runtime_put(&adev->dev);
+ pm_runtime_disable(&adev->dev);
+
kfree(pl08x);
out_no_pl08x:
amba_release_regions(adev);
OpenPOWER on IntegriCloud