diff options
Diffstat (limited to 'drivers/crypto/caam/error.c')
| -rw-r--r-- | drivers/crypto/caam/error.c | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c new file mode 100644 index 0000000..7e2d54b --- /dev/null +++ b/drivers/crypto/caam/error.c @@ -0,0 +1,248 @@ +/* + * CAAM Error Reporting + * + * Copyright 2009-2011 Freescale Semiconductor, Inc. + */ + +#include "compat.h" +#include "regs.h" +#include "intern.h" +#include "desc.h" +#include "jr.h" +#include "error.h" + +#define SPRINTFCAT(str, format, param, max_alloc) \ +{ \ + char *tmp; \ + \ + tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC); \ + sprintf(tmp, format, param); \ + strcat(str, tmp); \ + kfree(tmp); \ +} + +static void report_jump_idx(u32 status, char *outstr) +{ + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + + if (status & JRSTA_DECOERR_JUMP) + strcat(outstr, "jump tgt desc idx "); + else + strcat(outstr, "desc idx "); + + SPRINTFCAT(outstr, "%d: ", idx, sizeof("255")); +} + +static void report_ccb_status(u32 status, char *outstr) +{ + char *cha_id_list[] = { + "", + "AES", + "DES, 3DES", + "ARC4", + "MD5, SHA-1, SH-224, SHA-256, SHA-384, SHA-512", + "RNG", + "SNOW f8", + "Kasumi f8, f9", + "All Public Key Algorithms", + "CRC", + "SNOW f9", + }; + char *err_id_list[] = { + "None. No error.", + "Mode error.", + "Data size error.", + "Key size error.", + "PKHA A memory size error.", + "PKHA B memory size error.", + "Data arrived out of sequence error.", + "PKHA divide-by-zero error.", + "PKHA modulus even error.", + "DES key parity error.", + "ICV check failed.", + "Hardware error.", + "Unsupported CCM AAD size.", + "Class 1 CHA is not reset", + "Invalid CHA combination was selected", + "Invalid CHA selected.", + }; + u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >> + JRSTA_CCBERR_CHAID_SHIFT; + u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; + + report_jump_idx(status, outstr); + + if (cha_id < ARRAY_SIZE(cha_id_list)) { + SPRINTFCAT(outstr, "%s: ", cha_id_list[cha_id], + strlen(cha_id_list[cha_id])); + } else { + SPRINTFCAT(outstr, "unidentified cha_id value 0x%02x: ", + cha_id, sizeof("ff")); + } + + if (err_id < ARRAY_SIZE(err_id_list)) { + SPRINTFCAT(outstr, "%s", err_id_list[err_id], + strlen(err_id_list[err_id])); + } else { + SPRINTFCAT(outstr, "unidentified err_id value 0x%02x", + err_id, sizeof("ff")); + } +} + +static void report_jump_status(u32 status, char *outstr) +{ + SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__)); +} + +static void report_deco_status(u32 status, char *outstr) +{ + const struct { + u8 value; + char *error_text; + } desc_error_list[] = { + { 0x00, "None. No error." }, + { 0x01, "SGT Length Error. The descriptor is trying to read " + "more data than is contained in the SGT table." }, + { 0x02, "Reserved." }, + { 0x03, "Job Ring Control Error. There is a bad value in the " + "Job Ring Control register." }, + { 0x04, "Invalid Descriptor Command. The Descriptor Command " + "field is invalid." }, + { 0x05, "Reserved." }, + { 0x06, "Invalid KEY Command" }, + { 0x07, "Invalid LOAD Command" }, + { 0x08, "Invalid STORE Command" }, + { 0x09, "Invalid OPERATION Command" }, + { 0x0A, "Invalid FIFO LOAD Command" }, + { 0x0B, "Invalid FIFO STORE Command" }, + { 0x0C, "Invalid MOVE Command" }, + { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is " + "invalid because the target is not a Job Header " + "Command, or the jump is from a Trusted Descriptor to " + "a Job Descriptor, or because the target Descriptor " + "contains a Shared Descriptor." }, + { 0x0E, "Invalid MATH Command" }, + { 0x0F, "Invalid SIGNATURE Command" }, + { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR " + "Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO " + "LOAD, or SEQ FIFO STORE decremented the input or " + "output sequence length below 0. This error may result " + "if a built-in PROTOCOL Command has encountered a " + "malformed PDU." }, + { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."}, + { 0x12, "Shared Descriptor Header Error" }, + { 0x13, "Header Error. Invalid length or parity, or certain " + "other problems." }, + { 0x14, "Burster Error. Burster has gotten to an illegal " + "state" }, + { 0x15, "Context Register Length Error. The descriptor is " + "trying to read or write past the end of the Context " + "Register. A SEQ LOAD or SEQ STORE with the VLF bit " + "set was executed with too large a length in the " + "variable length register (VSOL for SEQ STORE or VSIL " + "for SEQ LOAD)." }, + { 0x16, "DMA Error" }, + { 0x17, "Reserved." }, + { 0x1A, "Job failed due to JR reset" }, + { 0x1B, "Job failed due to Fail Mode" }, + { 0x1C, "DECO Watchdog timer timeout error" }, + { 0x1D, "DECO tried to copy a key from another DECO but the " + "other DECO's Key Registers were locked" }, + { 0x1E, "DECO attempted to copy data from a DECO that had an " + "unmasked Descriptor error" }, + { 0x1F, "LIODN error. DECO was trying to share from itself or " + "from another DECO but the two Non-SEQ LIODN values " + "didn't match or the 'shared from' DECO's Descriptor " + "required that the SEQ LIODNs be the same and they " + "aren't." }, + { 0x20, "DECO has completed a reset initiated via the DRR " + "register" }, + { 0x21, "Nonce error. When using EKT (CCM) key encryption " + "option in the FIFO STORE Command, the Nonce counter " + "reached its maximum value and this encryption mode " + "can no longer be used." }, + { 0x22, "Meta data is too large (> 511 bytes) for TLS decap " + "(input frame; block ciphers) and IPsec decap (output " + "frame, when doing the next header byte update) and " + "DCRC (output frame)." }, + { 0x80, "DNR (do not run) error" }, + { 0x81, "undefined protocol command" }, + { 0x82, "invalid setting in PDB" }, + { 0x83, "Anti-replay LATE error" }, + { 0x84, "Anti-replay REPLAY error" }, + { 0x85, "Sequence number overflow" }, + { 0x86, "Sigver invalid signature" }, + { 0x87, "DSA Sign Illegal test descriptor" }, + { 0x88, "Protocol Format Error - A protocol has seen an error " + "in the format of data received. When running RSA, " + "this means that formatting with random padding was " + "used, and did not follow the form: 0x00, 0x02, 8-to-N " + "bytes of non-zero pad, 0x00, F data." }, + { 0x89, "Protocol Size Error - A protocol has seen an error in " + "size. When running RSA, pdb size N < (size of F) when " + "no formatting is used; or pdb size N < (F + 11) when " + "formatting is used." }, + { 0xC1, "Blob Command error: Undefined mode" }, + { 0xC2, "Blob Command error: Secure Memory Blob mode error" }, + { 0xC4, "Blob Command error: Black Blob key or input size " + "error" }, + { 0xC5, "Blob Command error: Invalid key destination" }, + { 0xC8, "Blob Command error: Trusted/Secure mode error" }, + { 0xF0, "IPsec TTL or hop limit field either came in as 0, " + "or was decremented to 0" }, + { 0xF1, "3GPP HFN matches or exceeds the Threshold" }, + }; + u8 desc_error = status & JRSTA_DECOERR_ERROR_MASK; + int i; + + report_jump_idx(status, outstr); + + for (i = 0; i < ARRAY_SIZE(desc_error_list); i++) + if (desc_error_list[i].value == desc_error) + break; + + if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) { + SPRINTFCAT(outstr, "%s", desc_error_list[i].error_text, + strlen(desc_error_list[i].error_text)); + } else { + SPRINTFCAT(outstr, "unidentified error value 0x%02x", + desc_error, sizeof("ff")); + } +} + +static void report_jr_status(u32 status, char *outstr) +{ + SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__)); +} + +static void report_cond_code_status(u32 status, char *outstr) +{ + SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__)); +} + +char *caam_jr_strstatus(char *outstr, u32 status) +{ + struct stat_src { + void (*report_ssed)(u32 status, char *outstr); + char *error; + } status_src[] = { + { NULL, "No error" }, + { NULL, NULL }, + { report_ccb_status, "CCB" }, + { report_jump_status, "Jump" }, + { report_deco_status, "DECO" }, + { NULL, NULL }, + { report_jr_status, "Job Ring" }, + { report_cond_code_status, "Condition Code" }, + }; + u32 ssrc = status >> JRSTA_SSRC_SHIFT; + + sprintf(outstr, "%s: ", status_src[ssrc].error); + + if (status_src[ssrc].report_ssed) + status_src[ssrc].report_ssed(status, outstr); + + return outstr; +} +EXPORT_SYMBOL(caam_jr_strstatus); |
